Self‐assembled micelles prepared from poly(ɛ‐caprolactone)–poly(ethylene glycol) and poly(ɛ‐caprolactone/glycolide)–poly(ethylene glycol) block copolymers for sustained drug delivery

A series of poly(?‐caprolactone)–poly(ethylene glycol) (PCL‐PEG) and poly(?‐caprolactone/glycolide)–poly(ethylene glycol) [P(CL/GA)‐PEG] diblock copolymers were prepared by ring‐opening polymerization of ?‐caprolactone or a mixture of ?‐caprolactone and glycolide using monomethoxy PEG (mPEG) as macroinitiator and Sn(Oct)₂ as catalyst. The resulting copolymers were characterized using ¹H‐NMR, gel permeation chromatography, differential scanning calorimetry, and wide‐angle X‐ray diffraction. Copolymer micelles were prepared using the nanoprecipitation method. The morphology of the micelles was spherical or worm‐like as revealed by transmission electron microscopy, depending on the copolymer composition and the length of the hydrophobic block. Introduction of the glycolide component, even in small amounts (CL/GA = 10), disrupted the chain structure and led to the formation of spherical micelles. Interestingly, the micelle size decreased with the encapsulation of paclitaxel. Micelles prepared from mPEG5000‐derived copolymers exhibited better drug loading properties and slower drug release than those from mPEG2000‐derived copolymers. Drug release was faster for copolymers with shorter PCL blocks than for those with longer PCL chains. The introduction of glycolide moieties enhanced drug release, but the overall release rate did not exceed 10% in 30 days. In contrast, drug release was enhanced in acidic media. Therefore, these bioresorbable micelles and especially P(CL/GA)‐PEG micelles with excellent stability, high drug loading content, and prolonged drug release could be promising for applications as drug carriers. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45732.     

Application of response surface methodology to evaluate the effect of dry‐spinning parameters on poly (ε‐caprolactone) fiber properties

Poly (ε‐caprolactone) fibers were prepared by dry‐spinning method. The effect of processing parameters on linear density, mechanical, and morphological properties of fibers was investigated using the response surface methodology (RSM). This method allowed evaluating a quantitative relationship between polymer concentrations, spinning speed, and draw ratio on the properties of the fibers. Polynomial regression model was fitted to the experimental data to generate predicted response. The results were subjected to analysis of variance to determine significant parameters. It was found that all three parameters had significant effect on linear density of fibers. Combined effect of concentration and spinning speed was observed in which the linear density of fiber was more sensitive to changes in the solution concentration at lower spinning speed. Polymer concentration had the largest influence on the mechanical properties of fibers. An average cross‐sectional radius of fibers was affected by concentration and draw ratio in opposite manner. Among all three parameters, only polymer concentration had significant effect on circularity of fiber cross sections. By applying the RSM, it was possible to obtain a mathematical model that can be used to better define processing parameters to fabricate dry‐spun PCL fiber in a more rational manner. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42113.     

Synthesis,self‐assembly,and drug release behavior of star‐shaped poly(ε‐caprolactone)‐b‐poly(ethylene oxide) block copolymer with porphyrin core

A serial of star‐shaped poly(ε‐caprolactone)‐b‐poly(ethylene oxide) (SPPCL‐b‐PEO) block copolymers with porphyrin core were successfully synthesized from ring‐opening polymerization (ROP) of ε‐caprolactone (CL) initiated with porphyrin core, followed by coupling reaction with a hydrophilic polymer poly(ethylene oxide) (PEO) shell. The structure of this novel copolymer were synthesized and thoroughly characterized by Nuclear Magnetic Resonance (NMR), Gel Permeation Chromatography (GPC), Fourier Transform Infrared Spectroscopy (FTIR). Notably, the as‐prepared porphyrin‐cored star‐shaped copolymer could self‐assembly into different structures determined by transmission electron microscopy (TEM) and dynamic lighting scattering (DLS), which provides the great potential of using this well‐defined photodynamic therapy material for drug delivery system. Particularly, the doxorubicin‐loaded SPPCL‐b‐PEO nanosphere exhibits property of pH‐induced drug release. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40996.     

Effects of the process parameters on the initial burst release of poly(lactide‐co‐glycolide) microspheres containing bovine serum albumin by the double‐emulsion solvent evaporation/extraction method

The effects of fabrication parameters on the morphology, drug loading, and initial burst release of poly(lactide‐co‐glycolide) microspheres loaded with bovine serum albumin were investigated to establish an optimal process and system for the in vivo delivery of therapeutic proteins. Through the addition of salts or sugars to induce an osmotic pressure in the external water phase, large microspheres were seen to have their morphology, drug loading, and initial burst release significantly affected. However, the effect was not observed for compact microspheres less than 10 μm in diameter. The presence of poly(vinyl alcohol), Pluronic F127, and Tween 80 in the internal water phase had detrimental effects on the drug loading because of the depressed stability of the primary emulsion and competitive interactions of surface‐active substances with the polymer. However, the simultaneous addition of salts to the external water phase resulted in enhanced drug loading and decreased initial burst. The polymer concentration and volume of the internal water phase were important factors influencing the characteristics of the microspheres. These parameters were optimized for achieving the maximal drug loading and a low initial burst. The solvent extraction method yielded microspheres with a higher drug loading and a lower initial burst in comparison with the solvent evaporation method. Different ranges of protein encapsulation efficiencies were obtained with blends of poly(lactide‐co‐glycolide) and poly(ethylene glycol), depending on the molecular weight and content of poly(ethylene glycol). © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Development of ultrasmall chitosan/succinyl β‐cyclodextrin nanoparticles as a sustained protein‐delivery system

In this article, we introduce a new method for preparing ultrasmall chitosan (CS)/succinyl β‐cyclodextrin (SCD) nanoparticles (NPs) intended for loading bovine serum albumin (BSA) as a model protein. The proposed method is based on the complex coacervation technique followed by ionotropic gelation with tripolyphosphate. SCD, an anionic derivative of cyclodextrin, was synthesized and used in CS‐based NPs to enhance the entrapment efficiency of BSA. The results show that with this approach, ultrasmall, compact, and neutralized NPs with a mean particle size near 30 nm were obtained. A high degree of protein entrapment in the NPs led to a significant improvement in the BSA release profile with a low initial burst release (ca. 3% w/v of the initially loaded BSA) and a sustained release over time. This enabled a suitable nanocarrier for long‐term protein delivery (30% release over 120 h). © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39648.     

Factors influencing the small‐scale melt spinning of poly(ε‐caprolactone) monofilament fibres

Some of the main factors affecting the small‐scale melt spinning of poly(ε‐caprolactone), PCL, monofilament fibres have been studied. These factors included spinning temperature, extrusion rate, take‐up rate and draw ratio. The underlying influence of the polymer's own characteristic properties, in particular its chemical structure, transition temperatures (T_g, T_m) and crystallizability, were also interpreted within the context of the melt spinning process. Physically, the as‐spun fibres obtained were uniform in diameter and smooth in surface appearance. They were also semi‐crystalline (>50%) in morphology. Mechanically, however, they were still very weak and highly extensible. Subsequent off‐line cold‐drawing at room temperature introduced the required degree of molecular orientation to reinforce the fibres, yielding tensile strengths of approaching 300 MPa. PCL fibres of precisely controlled physical dimensions and matrix morphology are attracting increasing interest for use in biomedical applications. This paper describes how this control can be achieved through the processing operation. Copyright © 2003 Society of Chemical Industry     

Release of ibuprofen from poly(ε‐caprolactone‐co‐D,L‐lactide) and simulation of the release

A study was made of the effects of the initial ibuprofen load and of the specimen shape on the release of ibuprofen from poly(ε‐caprolactone‐co‐D,L ‐lactide). The mol ratio of the comonomers in the copolymer was 96/4 (caprolactone to lactide) and the experiments were conducted at 37°C in vitro. The results showed that release of ibuprofen is fast and that the rate and profile of the release vary with both the initial load of ibuprofen and the shape of the specimen. The rate of ibuprofen release increases with the initial load and with the surface area‐to‐volume ratio of the specimen, obeying Fickian diffusion. The experimental findings were compared with the results of a mathematical simulation model based on the finite‐difference method. Diffusion parameters needed for the simulation were determined from a separately conducted set of experiments using various methods. For the most part, the results of the simulations and the experiments were in good agreement. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1279–1288, 2003     

Rapid fabrication of poly(ε‐caprolactone) nanofibers using needleless alternating current electrospinning

Poly(ε‐caprolactone) ( PCL) biopolymer nanofibers and micro‐fibers have been fabricated for the first time at the rates up to 14.0 g per hour using a needleless and collectorless alternating current electrospinning technique. By combining the ac‐voltage, “green” low toxicity glacial acetic acid (AA) as the solvent and sodium acetate (NaAc) as an additive, beadless PCL fibers with diameters tunable from 150 nm to 2000 nm, varying surface morphology and degree of self‐bundling are obtained. In this new approach, the addition of NaAc plays a crucial role in improving the spinnability of PCL solution and fiber morphology. NaAc reveals the concentration‐dependent effect on charge transfer and rheological properties of the PCL/AA precursor, which results in broader ranges of spinnable PCL concentrations and ac‐voltages suitable for rapid manufacturing of PCL‐based fibers. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43232.     

Preparation of poly(ε‐caprolactone)/poly(ε‐caprolactone‐co‐lactide) (PCL/PLCL) blend filament by melt spinning

Poly(ε‐caprolactone)/poly(ε‐caprolactone‐co‐lactide) (PCL/PLCL) blend filaments with various ratios of PCL and PLCL were prepared by melt spinning. The effect of PLCL content on the physical properties of the blended filament was investigated. The melt spinning of the blend was carried out and the as spun filament was subsequently subjected to drawing and heat setting process. The addition of PLCL caused significant changes in the mechanical properties of the filaments. Crystallinity of blend decreased with the addition of PLCL as observed by X‐ray diffraction (XRD) and differential scanning calorimetry (DSC). Scanning electron microscopy (SEM) revealed that the fracture surface becomes rougher at higher PLCL content. It may be proposed that PCL and PLCL show limited interaction within the blend matrix. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

In vitro degradation and drug‐release behavior of electrospun,fibrous webs of poly(lactic‐co‐glycolic acid)

Ultrafine fibrous webs of poly(lactide‐co‐glycolic acid) (PLGA) containing the bactericidal antibiotic drug rifampin were prepared by electrospinning, and their properties were investigated for wound‐dressing applications. Because PLGA is a biodegradable and biocompatible polymer, it is one of the best materials for the preparation of wound‐dressing substrates. Through this investigation of PLGA/rifampin electrospun webs, we found that the in vitro degradation reached approximately 60% in 10 days, and the drug release from the webs showed a fast and constant profile suitable for wound‐dressing applications. Also, we observed that both the web‐degradation rate and the drug‐release rate increased as the drug concentration in the PLGA/rifampin electrospun webs and the content level of glycolide units in the PLGA polymer matrix increased. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis and evaluation of a star amphiphilic block copolymer from poly(ε‐caprolactone) and poly(ethylene oxide) as load and release carriers for guest molecules

The use of polymeric materials as the carrier in the controlled release of guest molecules has become an important research area in the polymeric materials science, because of their advantages of the safety, efficacy and patient convenience. One of them, star amphiphilic polymer can self‐assemble into supermolecular structure (polymer micelles) by the balance of hydrophilic and hydrophobic interaction. In this study, star amphiphilic copolymer consisting of hydrophobic and biodegradable poly(ε‐caprolactone) (PCL) and hydrophilic poly(ethylene oxide) (PEO) blocks were synthesized by two‐step ring‐opening polymerization. The resultant polymer was characterizated by FTIR, ¹H‐NMR, and DSC to determine its chemical structure. The morpholoy of the polymer micelles was analyzed by TEM. Using star‐PCL‐b‐PEO as carriers and congo red as model guest molecules, the encapsulation and release properties were investigated by UV–visable analysis. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Preparation and release characteristics of dexamethasone acetate loaded organochlorine‐free poly(lactide‐co‐glycolide) nanoparticles

Dexamethasone‐loaded poly(lactide‐co‐glycolide) (PLGA) devices are commonly used as model systems for controlled release. In this study, PLGA nanoparticles containing dexamethasone acetate were prepared by a nanoprecipitation technique in the absence of organochlorine solvents and were characterized by their mean size, ζ potential, scanning electron microscopy, and differential scanning calorimetry to develop a controlled release system. The analytical method for the quantification of dexamethasone acetate by high‐performance liquid chromatography was validated. The results show that it was possible to prepare particles at a nanometric size because the average diameter of the drug‐loaded PLGA particles was 540 ± 4 nm with a polydispersity index of 0.07 ± 0.01 and a ζ potential of ?2.5 ± 0.3 mV. These values remained stable for at least 7 months. The drug encapsulation efficiency was 48%. In vitro tests showed that about 25% of the drug was released in 48 h. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41199.     

Synthesis and characterization of the biomaterial poly(lactic acid‐co‐Nε‐carbobenzoyloxy‐L‐lysine) via direct melt copolymerization

With D,L ‐lactic acid and N^ϵ‐carbobenzoyloxy‐L ‐lysine [Lys(Z)] as the starting monomer material and tin dichloride as the catalyst, the drug carrier material poly(lactic acid‐co‐N^ϵ‐carbobenzoyloxy‐L ‐lysine) was synthesized via direct melt polycondensation. The copolymer was systematically characterized with intrinsic viscosity testing, Fourier transform infrared spectroscopy, ¹H‐NMR, gel permeation chromatography, differential scanning calorimetry, and X‐ray diffraction. The influences of different feed molar ratios were examined. With increasing molar feed content of Lys(Z), the intrinsic viscosity, weight‐average molecular weight, and polydispersity index (weight‐average molecular weight/number‐average molecular weight) gradually decreased. Because of the introduction of Lys(Z) with a big aromatic ring into the copolymer, the glass‐transition temperature gradually increased with increasing feed charge of Lys(Z), and all of the copolymers were amorphous. The copolymers, with weight‐average molecular weights from 10,500 to 6900 Da, were obtained and could reach the molecular weight level of poly(lactic acid) modified by Lys(Z) via the ring‐opening polymerization of the cyclic intermediates, such as lactide and morpholine‐2,5‐dione. However, a few terminal carboxyl groups might have been deprotected during the polymerization reaction under high temperatures. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Chitosan‐modified d‐α‐tocopheryl poly(ethylene glycol) 1000 succinate‐b‐poly(ε‐caprolactone‐ran‐glycolide) nanoparticles for the oral chemotherapy of bladder cancer

Oral chemotherapy is quickly emerging as an appealing option for cancer patients. It is less stressful because the patient has fewer hospital visits and can still maintain a close relationship with health care professionals. Three kinds of nanoparticles made from commercial poly(ε‐caprolactone) (PCL) and self‐synthesized d‐α‐tocopheryl poly(ethylene glycol) 1000 succinate ‐b‐poly(ε‐caprolactone‐ran‐glycolide) [TPGS‐b‐(PCL‐ran‐PGA)] diblock copolymer were prepared in this study for the oral delivery of antitumor agents, including chitosan‐modified PCL nanoparticles, nonmodified TPGS‐b‐(PCL‐ran‐PGA) nanoparticles, and chitosan‐modified TPGS‐b‐(PCL‐ran‐PGA) nanoparticles. First, the TPGS‐b‐(PCL‐ran‐PGA) diblock copolymer was synthesized and structurally characterized. Chitosan was adopted to extend the retention time at the cell surface and thus increase the chance of nanoparticle uptake by the gastrointestinal mucosa and improve the absorption of drugs after oral administration. The resulting TPGS‐b‐(PCL‐ran‐PGA) nanoparticles were found to be of spherical shape and around 200 nm in diameter with a narrow size distribution. The surface charge of the TPGS‐b‐(PCL‐ran‐PGA) nanoparticles could be reversed from anionic to cationic after surface modification. The chitosan‐modified TPGS‐b‐(PCL‐ran‐PGA) nanoparticles displayed a significantly higher level of cellular uptake compared with the chitosan‐modified PCL nanoparticles and nonmodified TPGS‐b‐(PCL‐ran‐PGA) nanoparticles. In vitro cell viability studies showed the advantages of the chitosan‐modified TPGS‐b‐(PCL‐ran‐PGA) nanoparticles over Taxol in terms of their cytotoxicity against human RT112 cells. In summary, the oral delivery of antitumor agents by chitosan‐modified TPGS‐b‐(PCL‐ran‐PGA) nanoparticles produced results that were promising for the treatment of patients with bladder cancer. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 2118–2126, 2013     

Fabrication and drug release properties of poly(5‐benzyloxy‐trimethylene‐co‐glycolide) microspheres

Poly(5‐benzyloxy‐trimethylene carbonate‐co‐glycolide) random copolymers were synthesized through the ring‐opening polymerization of 5‐benzyloxy‐trimethylene carbonate and glycolide (GA). The copolymers with different compositions, PBG‐1 with 17% GA units and PBG‐2 with 45% GA units, were obtained. Using these copolymers, microsphere drug delivery systems with submicron sizes were fabricated using an “ultrasonic assisted precipitation method.” The in‐vitro drug release from these microspheres was investigated. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Biodegradable studies of poly(trimethylenecarbonate‐ε‐caprolactone)‐block‐poly(p‐dioxanone), poly(dioxanone), and poly(glycolide‐ε‐caprolactone) (Monocryl®) monofilaments

The aim of the study was to investigate the mechanical properties and biodegradability of poly(trimethylenecarbonate‐ε‐caprolactone)‐block‐poly(p‐dioxanone) [P(TMC‐ε‐CL)‐block‐PDO] in comparison with poly(p‐dioxanone) and poly(glycolide‐ε‐caprolactone) (Monocryl®) monofilaments in vivo and in vitro. P(TMC‐ε‐CL)‐block‐PDO copolymer and poly(p‐dioxanone) were prepared by using ring‐opening polymerization reaction. The monofilament fibers were obtained using conventional melt spun methods. The physicochemical and mechanical properties, such as viscosity, molecular weight, crystallinity, and knot security, were studied. Tensile strength, breaking strength retention, and surface morphology of P(TMC‐ε‐CL)‐block‐PDO, poly(p‐dioxanone), and Monocryl monofilament fibers were studied by immersion in phosphate‐buffered distilled water (pH 7.2) at 37°C and in vivo. The implantation studies of absorbable suture strands were performed in gluteal muscle of rats. The polymers, P(TMC‐ε‐CL)‐block‐PDO, poly(p‐dioxanone), and Monocryl, were semicrystalline and showed 27, 32, and 34% crystallinity, respectively. Those mechanical properties of P(TMC‐ε‐CL)‐block‐PDO were comparatively lower than other polymers. The biodegradability of poly(dioxanone) homopolymer is much slower compared with that of two copolymers. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 737–743, 2006     

Synthesis and characterization of novel lipid functionalized poly(ε‐caprolactone)s

A series of novel lipid functionalized poly(ε‐caprolactone)s (PCLs) were synthesized through ROP of ε‐caprolactone in the presence of threo‐9,10‐dihydroxyoctadecanoic acid, synthesized from oleic acid. PCLs with different molecular weights were obtained by controlling the molar ratio of the initiator to the monomer. DSC and XRD analysis indicate that the crystallinity of PCLs decreased when compared to unfunctionalized PCL. The enzymatic degradation study shows that for samples with lower lipid derivatives content, a higher enzymatic degradation rate was observed because the lipase enzymes attack the ester bonds of the polymer; increased lipid content therefore inhibits the action of the lipase enzymes. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Drug release from electrospun fibers of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) grafted with poly(N‐vinylpyrrolidone)

Poly(N‐vinylpyrrolidone) (PVP) groups were grafted onto poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) backbone to modify the properties of PHBV and synthesize a new novel biocompatible graft copolymer. Based on these graft copolymers, electrospun fiber mats and commonly cast films were explored as drug delivery vehicles using tetracycline hydrochloride as a model drug. Toward that end, the fibers were electrospun and the films were cast from chloroform solutions containing a small amount of methanol to solubilize the drug. The Brookfield viscosities of the solution were determined to achieve the optimal electrospinning conditions. The vitro release of the tetracycline hydrochloride from these new drug delivery systems was followed by UV–vis spectroscopy. To probe into the factors affected on the release behavior of these drug delivery systems, their water absorbing abilities in phosphate buffer solution were investigated, together with their surface hydrophilicity, porosity and crystallization properties were characterized by water contact angles, capillary flow porometer, DSC, and WAXD, respectively. The morphological changes of these drug delivery vehicles before and after release were also observed with SEM. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Poly(vinyl pyrrolidone‐co‐vinyl acetate)‐graft‐poly(ε‐caprolactone) as a compatibilizer for cellulose acetate/poly(ε‐caprolactone) blends

Poly(vinyl pyrrolidone‐co‐vinyl acetate)‐graft‐poly(ε‐caprolactone) (PVPVAc‐g‐PCL) was synthesized by radical copolymerization of N‐vinyl‐2‐pyrrolidone (VP)/vinyl acetate (VAc) comonomer and PCL macromonomer containing a reactive 2‐hydroxyethyl methacrylate terminal. The graft copolymer was designed in order to improve the interfacial adhesiveness of an immiscible blend system composed of cellulose acetate/poly(ε‐caprolactone) (CA/PCL). Adequate selections of preparation conditions led to successful acquisition of a series of graft copolymer samples with different values of molecular weight ( ), number of grafts (n), and segmental molecular weight of PVPVAc between adjacent grafts (M_n (between grafts)). Differential scanning calorimetry measurements gave a still immiscible indication for all of the ternary blends of CA/PCL/PVPVAc‐g‐PCL (72 : 18 : 10 in weight) that were prepared by using any of the copolymer samples as a compatibilizer. However, the incorporation enabled the CA/PCL (4 : 1) blend to be easily melt‐molded to give a visually homogeneous film sheet. This compatibilizing effect was found to be drastically enhanced when PVPVAc‐g‐PCLs of higher and M_n (between grafts) and lower n were employed. Scanning electron microscopy revealed that a uniform dispersion of the respective ingredients in the ternary blends was attainable with an assurance of the mixing scale of several hundreds of nanometers. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Fluorescent microspheres of poly(ethylene glycol)–poly(lactic acid)–fluorescein copolymers synthesized by Ugi four‐component condensation

Microparticles formed by poly(lactic acid) (PLA) and poly(ethylene glycol) (PEG) diblock copolymers containing fluorescein grafted to the polymer chain were synthesized by a Ugi four‐component condensation (UFCC) reaction. To synthesize these copolymers, lactide was first polymerized by a ring‐opening polymerization with alcohol initiators containing functional groups to give carboxyl‐ and aldehyde‐end‐functionalized PLA. Two different fluorescent block copolymers (FCPs) of PEG–PLA conjugated to fluorescein (FCP 1 and FCP 2) were then synthesized by UFCC; they gave yields in the range 65–75%. These copolymers were characterized well according their chemical structures and thermal properties, and we prepared fluorescent microspheres (FMSs) from them with the single emulsion–solvent evaporation method (FMS 1 and FMS 2). A new application of UFCC in the preparation of biomasked drug‐delivery systems is proposed. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42994.