Potential Energetic Plasticizers on the Basis of 2,2‐Dinitropropane‐1,3‐diol and 2,2‐Bis(azidomethyl)propane‐1,3‐diol

Different carboxylic acid derivatives of 2,2‐dinitropropane‐1,3‐diol (DNPD) and 2,2‐bis(azidomethyl)propane‐1,3‐diol (BAMP) were synthesized to investigate their suitability as energetic plasticizers. The syntheses were carried out using acyl chlorides of acetic, propionic, and butyric acid. The obtained products were characterized by elemental analysis, NMR, and IR spectroscopy. The energetic properties of the synthesized compounds were calculated on the basis of the computed heats of formation at the CBS‐4M level of theory using the EXPLO5 version 6.02 computer code. Investigations of physical stabilities were carried out using BAM drop hammer and friction tester. Low and high temperature behavior was determined by differential scanning calorimetry (DSC). The energetic and physical properties of the synthesized compounds were compared to the literature known energetic plasticizers N‐butyl nitratoethylnitramine (BuNENA) and diethylene glycol bis(azidoacetate) ester (DEGBAA). For analyzing the plasticizing abilities, mixtures of glycidyl azide polymer (GAP) and poly(3‐nitratomethyl‐3‐methyloxetan) (polyNIMMO) were prepared with both propionyl based compounds in different ratios and investigated regarding their glass transition temperatures and viscosity. Both compounds showed plasticizing effects in the range of BuNENA.     

Synthesis of formaldehyde polymers from benzene‐1,2‐diol,phenolic alkane‐1,2‐diol,and phenolic alkane‐1,3‐diol as immobilized chelatants for borate anion

A variety of phenolic aryl‐1,2‐ and 1,3‐diols have been condensed with formaldehyde to form polymers serving as immobilized chelatants for borate anions. In this way, polymers from 1,2‐dihydroxybenzene, 2‐hydroxymethylphenol, and a 3‐methyl derivative (saligenins) and 2‐(4‐hydroxyphenyl)‐propane‐1,3‐diol have been converted into formaldehyde polymers with an increasing level of conformational mobility in the diol moiety of the polymer. The extraction of borate from alkaline solutions with three types of polymers has been examined, and the polymer containing planar 1,2‐dihydroxybenzene has been found to be superior to a saligenin‐ and 2‐(4‐hydroxyphenyl)‐ propane‐1,3‐diol‐derived polymer. This suggests that conformational mobility is not an important structural feature. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

The Synthesis and Energetic Properties of 5,7‐Dinitrobenzo‐1,2,3,4‐tetrazine‐1,3‐dioxide (DNBTDO)

Energetic tetrazine‐1,3‐dioxide, 5,7‐dinitrobenzo‐1,2,3,4‐tetrazine‐1,3‐dioxide ( DNBTDO ), was synthesized in 45 % yield. DNBTDO was characterized as an energetic material in terms of performance (V_det 8411 m s⁻¹; p_{C J} 3.3×10¹⁰ Pa at a density of 1.868 g cm⁻³), mechanical sensitivity (impact and friction as a function of grain size), and thermal stability (T_dec 204 °C). DNBTDO exhibits a sensitivity slightly higher than that of RDX , and a performance slightly lower (96 % of RDX ).     

Preparation and characterization of castor oil‐based waterborne polyurethane crosslinked with 2‐amino‐2‐(hydroxymethyl)‐1,3‐propanediol

Crosslinked castor oil (CO)‐based waterborne polyurethane was synthesized from CO, polycarbonate diol, isophorone diisocyanate, 2,2‐dimethylol propionic acid, and 2‐amino‐2‐(hydroxymethyl)‐1,3‐propanediol (THAM) using pre‐polymer process. Fourier transform infrared spectroscopy, X‐ray diffraction, and transmission electron microscopy were utilized to characterize the above‐synthesized polyurethane. The effect of THAM content was studied on particle size, zeta potential, thermogravimetric analysis, differential scanning calorimetry, tensile tests, and contact angle measurement. Results showed that, with the increase of THAM content, the particle size increases and the thermal stability increases. Furthermore, as the THAM content increased from 0% to 1.5%, tensile strength increased from 9.5 to 16.3 MPa, contact angle increased from 67.8° to 87.4°, and bibulous rate decreased from 13.4% to 6.1%, the elongation at break dropped from 154.8% to 37.9%, respectively. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45532.     

Synthesis and characterization of novel polyaspartimides derived from 2,2′‐dimethyl‐4,4′‐bis(4‐maleimidophenoxy)biphenyl and various diamines

A novel bismaleimide, 2,2′‐dimethyl‐4,4′‐bis(4‐maleimidophenoxy)biphenyl, containing noncoplanar 2,2′‐dimethylbiphenylene and flexible ether units in the polymer backbone was synthesized from 2,2′‐dimethyl‐4,4′‐bis(4‐aminophenoxy)biphenyl with maleic anhydride. The bismaleimide was reacted with 11 diamines using m‐cresol as a solvent and glacial acetic acid as a catalyst to produce novel polyaspartimides. Polymers were identified by elemental analysis and infrared spectroscopy, and characterized by solubility test, X‐ray diffraction, and thermal analysis (differential scanning calorimetry and thermogravimetric analysis). The inherent viscosities of the polymers varied from 0.22 to 0.48 dL g⁻¹ in concentration of 1.0 g dL⁻¹ of N,N‐dimethylformamide. All polymers are soluble in N‐methyl‐2‐pyrrolidone, N,N‐dimethylacetamide, N,N‐dimethylformamide, dimethylsulfoxide, pyridine, m‐cresol, and tetrahydrofuran. The polymers, except PASI‐4, had moderate glass transition temperature in the range of 188°–226°C and good thermo‐oxidative stability, losing 10% mass in the range of 375°–426°C in air and 357°–415°C in nitrogen. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 279–286, 1999     

2,2‐Dinitro‐1,3‐Bis‐Nitrooxy‐Propane (NPN): A New Energetic Plasticizer

A new energetic plasticizer, 2,2‐dinitro‐1,3‐bis‐nitrooxy‐propane (NPN), has been characterized. Its high oxygen balance, +12.5%, and low glass transition temperature, −81.5 °C (midpoint), makes it very attractive as an energetic plasticizer in solid propellants. The ability of NPN to lower the glass transition temperature and viscosity of uncured PolyNIMMO has been studied and compared to other energetic plasticizers, such as BDNPA/F and butyl‐NENA. NPN has a similar plasticizing effect as butyl‐NENA, both on depressing the glass transition temperature and lowering the viscosity. To increase the poor thermal stability of NPN, several conventional nitrocellulose/nitroglycerine stabilizers were evaluated. Further work is however needed to find a more effective stabilizer.     

Synthesis and characterization of organosoluble and transparent polyimides derived from trans‐1,2‐bis(3,4‐dicarboxyphenoxy)cyclohexane dianhydride

A novel dianhydride, trans‐1,2‐bis(3,4‐dicarboxyphenoxy)cyclohexane dianhydride (1,2‐CHDPA), was prepared through aromatic nucleophilic substitution reaction of 4‐nitrophthalonitrile with trans‐cyclohexane‐1,2‐diol followed by hydrolysis and dehydration. A series of polyimides (PIs) were synthesized from one‐step polycondensation of 1,2‐CHDPA with several aromatic diamines, such as 2,2′‐bis(trifluoromethyl)biphenyl‐4,4′‐diamine (TFDB), bis(4‐amino‐2‐trifluoromethylphenyl)ether (TFODA), 4,4′‐diaminodiphenyl ether (ODA), 1,4‐bis(4‐aminophenoxy)benzene (TPEQ), 4,4′‐(1,3‐phenylenedioxy)dianiline (TPER), 2,2′‐bis[4‐(3‐aminodiphenoxy)phenyl]sulfone (m‐BAPS), and 2,2′‐bis[4‐(4‐amino‐2‐trifluoromethylphenoxy)phenyl]sulfone (6F‐BAPS). The glass transition temperatures (T_gs) of the polymers were higher than 198°C, and the 5% weight loss temperatures (T_d5%s) were in the range of 424–445°C in nitrogen and 415–430°C in air, respectively. All the PIs were endowed with high solubility in common organic solvents and could be cast into tough and flexible films, which exhibited good mechanical properties with tensile strengths of 76–105 MPa, elongations at break of 4.7–7.6%, and tensile moduli of 1.9–2.6 GPa. In particular, the PI films showed excellent optical transparency in the visible region with the cut‐off wavelengths of 369–375 nm owing to the introduction of trans‐1,2‐cyclohexane moiety into the main chain. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42317.     

Synthesis and characterization of new polyamides derived from 1,3‐(4‐carboxy phenoxy) propane and aromatic diamines

Six new polyamides 5a‐f containing flexible trimethylene segments in the main chain were synthesized through the direct polycondensation reaction of 1,3‐(4‐carboxy phenoxy) propane 3 with six derivatives of aromatic diamines 4a‐f in a medium consisting of N‐methyl‐2‐pyrrolidone, triphenyl phosphite, calcium chloride, and pyridine. The polycondensation reaction produced a series of novel polyamides containing flexible trimethylene segments in the main chain in high yield with inherent viscosities between 0.32 and 0.68 dL/g. The resulted polymers were fully characterized by means of FTIR spectroscopy, elemental analyses, inherent viscosity, and solubility tests. Thermal properties of these polymers were investigated by using thermal gravimetric analysis (TGA) and differential thermal gravimetric (DTG). The glass‐transition temperatures of these polyamides were recorded between 165 and 190°C by differential scanning calorimetry, and the 10% weight loss temperatures were ranging from 360 to 430°C under nitrogen. 1,3‐(4‐Carboxy phenoxy) propane 3 was prepared from the reaction of 4‐hydroxy benzoic acid 1 with 1,3‐dibromo propane 2 in the presence of NaOH solution. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

New thermoplastic segmented polyurethanes with hard segments derived from 4,4′‐diphenylmethane diisocyanate and methylenebis(1,4‐phenylenemethylenethio)dialcanols

New thermoplastic poly(ether–urethane)s and poly(carbonate–urethane)s were synthesized by a one‐step melt polymerization from poly(oxytetramethylene) diol (PTMO) and poly(hexane‐1,6‐diyl carbonate) diol (PHCD) as soft segments, 4,4′‐diphenylmethane diisocyanate, and 2,2′‐[methylenebis(1,4‐phenylenemethylenethio)]diethanol, 3,3′‐[methylenebis(1,4‐phenylenemethylenethio)]dipropan‐1‐ol or 6,6′‐[methylenebis(1,4‐phenylenemethylenethio)]dihexan‐1‐ol as unconventional chain extenders. The effects of the kind and amount of the polymer diol and chain extender used on the structure and properties of the polymers were studied. The polymers were examined by Fourier transform infrared (FTIR) spectroscopy, X‐ray diffraction analysis, atomic force microscopy, differential scanning calorimetry, thermogravimetric analysis (TGA), TGA coupled with FTIR spectroscopy, and Shore hardness and tensile testing. The obtained high‐molecular‐weight polymers showed elastomeric or plastic properties. Generally, the PTMO‐based polymers exhibited significantly lower glass‐transition temperatures (up to ?48.1 vs ?1.4°C), a higher degree of microphase separation, and ordering in hard‐segment domains in comparison with the corresponding PHCD‐based ones. Moreover, it was observed that the polymers with the PTMO soft segments showed poorer tensile strengths (up to 36.5 vs 59.6 MPa) but higher elongations at break. All of the polymers exhibited a relatively good thermal stability. Their temperatures of 1% mass loss were in the range 270–320°C. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Total replacement of solvent in polyurethane synthesis using carbon dioxide soluble 1,3‐dichlorodistannoxane catalysts

This work demonstrates catalytic synthesis of polyurethanes using 1,3‐dichlorodistannoxane catalysts ( 1 ) in carbon dioxide (CO₂) and carbon dioxide expanded liquids (CXL). Catalytic polyurethane synthesis was also performed in pure organic solvent (dimethylformamide) for comparison. In this study, mainly, 4, 4′‐methylene‐bis‐(phenyl isocyanate) (MDI) as the diisocyanate precursor and ethylene glycol (EG) as the diol precursor were used for polyurethane synthesis. In addition to MDI, hexamethylene diisocyanate (HDI), toluene diisocyanate (TDI), and p‐isocyanatobenzylisocyanate (PIBI) were also used for polyurethane synthesis with different diols or triol in CO₂. Polyurethanes with a molecular weight ranging from 3000 to 70,000 were synthesized depending upon the combination of diisocyanate and diol used. Comparable yields of polyurethanes were obtained using an all butyl group substituted ( 1a ) catalyst in CO₂ (55 bars, 50°C) and in DMF (50°C). Additionally, the yield and polydispersity index (PDI) of polymer formed in neat CO₂ was comparable with those synthesized in the largely used organic solvent DMF. Interestingly, catalyst 1a in CXL (55 bars, 50°C) gave higher yields, and polymers with lower PDI (1.19). Reactions carried out in scCO₂ at 145 bars using PIBI and EG were found to be about three times faster than the reaction carried out in DMF. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis and characterization of new thermally stable poly(ester‐imide)s derived from 2,2′‐bis(4‐trimellitimidophenoxy)biphenyl and 2,2′‐bis(4‐trimellitimidophenoxy)‐1,1′‐binaphthyl and various aromatic dihydroxy compounds

A series of new alternating aromatic poly(ester‐imide)s were prepared by the polycondensation of the preformed imide ring‐containing diacids, 2,2′‐bis(4‐trimellitimidophenoxy)biphenyl (2a) and 2,2′‐bis(4‐trimellitimidophenoxy)‐1,1′‐binaphthyl (2b) with various aromatic dihydroxy compounds in the presence of pyridine and lithium chloride. A model compound (3) was also prepared by the reaction of 2b with phenol, its synthesis permitting an optimization of polymerization conditions. Poly(ester‐imides) were fully characterized by FTIR, UV‐vis and NMR spectroscopy. Both biphenylene‐ and binaphthylene‐based poly(ester‐imide)s exhibited excellent solubility in common organic solvents such as tetrahydrofuran, m‐cresol, pyridine and dichloromethane. However, binaphthylene‐based poly(ester‐imide)s were more soluble than those of biphenylene‐based polymers in highly polar organic solvents, including N‐methyl‐2‐pyrrolidone, N,N‐dimethylacetamide, N,N‐dimethylformamide and dimethyl sulfoxide. From differential scanning calorimetry thermograms, the polymers showed glass‐transition temperatures between 261 and 315 °C. Thermal behaviour of the polymers obtained was characterized by thermogravimetric analysis, and the 10 % weight loss temperatures of the poly(ester‐imide)s was in the range 449–491 °C in nitrogen. Furthermore, crystallinity of the polymers was estimated by means of wide‐angle X‐ray diffraction. The resultant poly(ester‐imide)s exhibited nearly an amorphous nature, except poly(ester‐imide)s derived from hydroquinone and 4,4′‐dihydroxybiphenyl. In general, polymers containing binaphthyl units showed higher thermal stability but lower crystallinity than polymers containing biphenyl units. Copyright © 2005 Society of Chemical Industry     

Synthesis and characterization of biodegradable crosslinked polymers from 5‐hydroxylevulinic acid and α,ω‐diols

Novel biodegradable chemically crosslinked polymers, poly(5‐hydroxylevulinic acid‐co‐α,ω‐diol)s (PHLA‐diols), were synthesized from 5‐hydroxylevulinic acid and α,ω‐diols and characterized by Fourier transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, and dynamic mechanical analysis. The gel content, swelling ratio, tensile properties, and hydrolytic degradation behaviors were also measured and assessed. The glass‐transition temperature of the PHLA‐diols could be adjusted within a wide range (?50 to 30°C) by the type and feed ratio of the diol. Because of the low glass‐transition temperature and crosslink structure, they exhibited certain elastic properties. The tensile modulus, strength, and elongation at break measured at 37°C were 1.4–6.3 MPa, 0.8–1.6 MPa, and 10–25%, respectively. These polymers could be hydrolytically degraded. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Novel copolyesters containing naphthalene structure III. Copolyesters prepared from 2,6‐dimethyl naphthalate,ethylene glycol,and 2,2‐dialkyl‐1,3‐propanediols

Poly(ethylene naphthalate) (PEN) copolymers were prepared by melt polycondensation of dimethyl naphthalate and excess ethylene glycol with 5–40 mol % (in feed) of 1,3‐propanediol or 2,2‐dialkyl‐1,3‐propanediols, where the dialkyl groups are dimethyl, diethyl, and butyl‐ethyl. No significant depression of reduced specific viscosity was observed. The comonomer contents in the copolymers are considerably higher than those in the feed. The effects of the copolymer composition on the structures of the films were investigated using thermal analyses, density measurements, X‐ray diffraction methods, and other physical tests. The crystallinities and densities of heat‐treated films decreased with increasing content of comonomer and length of alkyl side chain in the comonomer. The glass transition temperature (T_g) and melting temperature (T_m) were decreased by the copolymerization, while an increase in the length of the alkyl side chain hardly affected T_ms of the heat‐treated films. Alkali resistance, moisture resistance, dye ability, and thermal shrinkage were increased by the incorporation of comonomer having an alkyl side chain. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 2754–2763, 2001     

Nonlinear optical studies on new conjugated poly{2,2l‐(3,4‐ dialkoxythiophene‐2,5‐diyl) bis[5‐(2‐thienyl)‐1,3,4‐oxadiazole]}s

Three new donor–acceptor type poly{2,2^l‐(3,4‐ dialkoxythiophene‐2,5‐diyl)bis[5‐(2‐thienyl)‐1,3,4‐oxadiazole]}s ( P1, P2, and P3 ) were synthesized starting from thiodiglycolic acid and diethyl oxalate through multistep reactions. The polymerization was carried out using chemical polymerization technique. The optical and charge‐transporting properties of the polymers were investigated by UV‐visible, fluorescence emission spectroscopic and cyclic voltammetric studies. The polymers showed bluish‐green fluorescence in solutions. The electrochemical band gaps were determined to be 2.03, 2.09, and 2.17 eV for P1 , P2, and P3, respectively. The nonlinear optical properties of new polymers were investigated at 532 nm using single beam Z‐scan and degenerate four‐wave mixing (DFWM) techniques with nanosecond laser pulses. The polymers exhibited strong optical limiting behavior due to “effective” three‐photon absorption. Values of the effective three‐photon absorption ( 3PA ) coefficients, third‐order nonlinear susceptibilities (χ⁽³⁾), and figures (F) of merit were calculated. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

X‐Ray reflectivity study of polyimide thin films swollen by 1,3‐butadiene and n‐butane

X‐ray reflectivity measurements were performed on two different polyimide thin films synthesized from 2,2‐bis(3,4‐carboxyphenyl)hexafluoropropane dianhydride (6FDA) in 1,3‐butadiene and n‐butane. In 1,3‐butadiene at 2.3 atm, the film thickness increased by 24–30%. However, the film thickness increased by only 10% in n‐butane at 2.3 atm. Excessive increases in film thickness were shown in 1,3‐butadiene, but the decreases in film density were minor. The probability of the condensation of 1,3‐butadiene in the films is indicated. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 1818–1825, 2000     

The Synthesis of Energetic Compound on 4,4′‐((2,4,6‐trinitro‐1,3‐phenylene)bis(oxy)) bis(1,3‐dinitrobenzene)(ZXC‐5): Thermally Stable Explosive with Outstanding Properties

The novel, thermally stable explosive 4,4′‐((2,4,6‐trinitro‐1,3‐phenylene)bis(oxy))bis(1,3‐dinitrobenzene) (Be referred to as ZXC‐ 5 in our laboratory) has been reported. ZXC‐5 can be synthesized by a simple synthetic method (The total synthesis of ZXC‐ 5 requires only two steps and the total yield of ZXC‐ 5 is more than 89 %) and shows the superior detonation performances (detonation pressure, detonation velocity, sensitivity toward mechanical stimuli, and temperature of decomposition). The structure of ZXC‐5 was characterized by multinuclear (¹H, ¹³C) NMR and mass spectrometry. The structure in the crystalline state was confirmed by low‐temperature single‐crystal X‐ray diffraction. From the calculated standard molar enthalpy of formation and the measured densities, the detonation properties were predicted by using the EXPLO5 V6.01 thermochemical computer code. The sensitivity of ZXC‐ 5 towards impact, electrostatic discharge, and friction were also measured.     

Synthesis of 5‐(1H‐Tetrazolyl)‐1‐hydroxy‐tetrazole and Energetically Relevant Nitrogen‐Rich Ionic Derivatives

Sodium 5‐cyanotetrazolate sesquihydrate ( 1 ) was prepared from sodium azide and two equivalents of sodium cyanide under acidic conditions. Sodium 5‐cyanotetrazolate sesquihydrate ( 1 ) reacts with hydroxylammonium chloride to form 5‐aminohydroximoyl tetrazole ( 2 ). 5‐Aminohydroximoyl tetrazole ( 2 ) is treated with sodium nitrite and hydrochloric acid to form 5‐chlorohydroximoyl‐tetrazole ( 3 ). The chloride azide exchange yields 5‐azidohydroximoyl‐tetrazole monohydrate ( 4 ). When compound 4 is treated with hydrochloric acid, 5‐(1H‐tetrazolyl)‐1‐hydroxytetrazole ( 5 ) is obtained in good yield. Compound 5 can be deprotonated twice by various bases. Different ionic derivatives such as bis(hydroxylammonium) ( 6 ), bis(hydrazinium) ( 7 ), bis(guanidinium) ( 8 ), bis(aminoguanidinium) ( 9 ), bis(ammonium) ( 10 ), and diaminouronium ( 11 ) 5‐(1‐oxidotetrazolyl)‐tetrazolate were synthesized and characterized. With respect to energetic use salts 6 and 7 are most relevant. Compounds 3 – 9 and 11 were characterized using low temperature single‐crystal X‐ray diffraction. All compounds were investigated by NMR and vibrational (IR, Raman) spectroscopy, mass spectrometry and elemental analysis. The thermal properties were determined by differential scanning calorimetry (DSC). The sensitivities towards impact ( 4 : 4 J, 5 : 40 J, 6 : 12 J, 7 : 40 J), friction: ( 4 : 60 N, 5 : 240 N, 6 : 216 N, 7 : 240 N), and electrical discharge ( 5 : 0.40 J, 6 : 0.75 J, 7 : 0.75 J), were investigated using BAM standards and a small scale electrostatic discharge tester. The detonation parameters of 5 – 7 were calculated using the EXPLO5.06 code and calculated (CBS‐4 M) enthalpy of formation values.     

Preparation and properties of 4,4′‐(hexafluoroisopropylidene) diphenol cured 2,2‐bis(4‐cyanatophenyl) propane

A novel easily curing system of 2,2‐bis(4‐cyanatophenyl) propane(BACY) was prepared by employing 4,4′‐(Hexafluoroisopropylidene) Diphenol (BPAF) as modifier. The curing efficiency of BPAF was evaluated by means of differential scanning calorimetry (DSC) and Fourier translation infrared spectroscopy analysis (FTIR). It was found that the exothermic peak temperature (T_p) was 168 °C when the content of BPAF/BACY was 15/85 by weight, while the temperature of BACY was 215 °C under the same conditions when trace of cobalt(III) acetylacetonate(CoAt(III)) was added. Besides, BPAF/BACY system owned outstanding properties including excellent curing characteristics, high shear strength, remarkable dielectric properties and high thermal stability in contrast to BACY, 4,4′‐(1‐methylethylidene) bisphenol(BPA)/BACY, and nonylphenol(NoP)/BACY systems. Moreover, the properties of cured BPAF/BACY modified by different proportions of BPAF were studied in detail. It was shown that moderate BPAF was conducive to most properties of polycyanurate, and the optimal proportion of BPAF/BACY was 15/85 by weight. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44518.     

Synthesis and characterization of new soluble poly(ester‐imide)s containing noncoplanar 2,2′‐dimethyl‐4,4′‐biphenylene unit

A new diimide–diacid chloride (3) containing a noncoplanar 2,2′‐dimethyl‐4,4′‐biphenylene unit was synthesized by treating 2,2′‐dimethyl‐4,4′‐diamino‐biphenylene with trimellitic anhydride followed by refluxing with thionyl chloride. Various new poly(ester‐imide)s were prepared from 3 with different bisphenols by solution polycondensation in nitrobenzene using pyridine as hydrogen chloride quencher at 170°C. Inherent viscosities of the poly(ester‐imide)s were found to range between 0.31 and 0.35 dL g^?1. All of the poly(ester‐imide)s, except the one containing pendent adamantyl group 5e, exhibited excellent solubility in the following solvents: N,N‐dimethylformamide, tetrahydrofuran, tetrachloroethane, dimethyl sulfoxide, N,N‐dimethylacetamide, N‐methyl‐2‐pyrrolidinone, m‐cresol, o‐chlorophenol, and chloroform. The polymers showed glass‐transition temperatures between 166 and 226°C. The 10% weight loss temperatures of the poly(ester‐imide)s, measured by TGA, were found to be in the range between 415 and 456°C in nitrogen. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2486–2493, 2004     

Amorphous copolyesters based on 1,3/1,4‐cyclohexanedimethanol: Synthesis,characterization and properties

Two series of amorphous copolyesters, PETGN and PETGS, were synthesized by the copolymerization of 2,6‐naphthalene dicarboxylic acid (NDA) (0–40%), succinic acid (SA) (0–40%), 1,3/1,4‐cyclohexanedimethanol (1,3/1,4‐CHDM) (10–50%), ethylene glycol (EG), and terephthalic acid (TPA). The compositions and molecular weights of the copolyesters were determined by ¹H NMR spectroscopy and viscometry, respectively. The thermal behaviors were studied over the entire range of copolymer compositions, using DSC and TGA. The optical characteristics, heat‐shrinkable effects and tensile properties of these polymers were also determined. Experimental results indicated that the thermal, optical, tensile, and shrinkage properties of PETGN and PETGS were functions of NDA or SA content. DSC and X‐ray analysis demonstrated that both PETGN and PETGS series were amorphous. Incorporating NDA and SA influenced the T_g values of those polymers, from about 37°C for PETG₃₀S₄₀ to 89°C for PETG₃₀N₄₀. Furthermore, the shrinkage of these amorphous copolyesters was more than 40% when the heating temperature was higher than the corresponding T_g. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008