Simultaneous refolding,purification, and immobilization of recombinant Fibrobacter succinogenes 1,3‐1,4‐β‐D‐glucanase on artificial oil bodies

BACKGROUND: 1,3‐1,4‐β‐D‐glucanase (1,3‐1,4‐β‐D‐glucan 4‐glucanohydrolase; EC 3.2.1.73) has been used in a range of industrial processes. As a biocatalyst, it is better to use immobilized enzymes than free enzymes, therefore, the immobilization of 1,3‐1,4‐β‐D‐glucanase was investigated. RESULTS: A 1,3‐1,4‐β‐D‐glucanase gene from Fibrobacter succinogenes was overexpressed in Escherichia coli as a recombinant protein fused to the N terminus of oleosin, a unique structural protein of seed oil bodies. With the reconstitution of the artificial oil bodies (AOBs), refolding, purification, and immobilization of active 1,3‐1,4‐β‐D‐glucanase was accomplished simultaneously. Response surface modeling (RSM), with central composite design (CCD), and regression analysis were successfully applied to determine the optimal temperature and pH conditions of the AOB‐immobilized 1,3‐1,4‐β‐D‐glucanase. The optimal conditions for the highest immobilized 1,3‐1,4‐β‐D‐glucanase activity (7.1 IU mg^?1 of total protein) were observed at 39 °C and pH 8.8. Furthermore, AOB‐immobilized 1,3‐1,4‐β‐D‐glucanase retained more than 70% of its initial activity after 120 min at 39 °C, and it was easily and simply recovered from the surface of the solution by brief centrifugation; it could be reused eight times while retaining more than 80% of its activity. CONCLUSIONS: These results indicate that the AOB‐based system is a comparatively simple and effective method for simultaneous refolding, purification, and immobilization of 1,3‐1,4‐β‐D‐glucanase. Copyright © 2009 Society of Chemical Industry     

Optimization of the Aqueous Enzymatic Extraction of Oil from Iranian Wild Almond

The seeds of wild almond, Amygdalus scoparia, contain a relatively high quantity of oil. In the current study, aqueous enzymatic extraction of the oil from Iranian wild almond was investigated using a protease and a cellulase to assist the extraction process. The effects of temperature, incubation time and pH on the oil recovery were evaluated using Box?Behnken design from response surface methodology (RSM). A 77.3 % recovery was predicted for oil using aqueous enzymatic extraction procedure at the optimized conditions of RSM (pH 5.76; 50 °C/5 h) when both enzymes were used at 1.0 % level (v/w). In practice, when both enzymes were used, a maximum of 77.8 % oil recovery was achieved at pH 5; 50 °C/4 h. Fatty acid profile, refractive index and saponification value of the aqueous enzymatic extracted oil in the current study were similar to those of the oil extracted with hexane. However, acid value, unsaponifiable matter and p‐anisidine value were higher when compared to those with hexane extracted oil. Peroxide value of the aqueous enzymatic oil was lower than that of oil extracted by hexane. Aqueous enzymatic extraction can be suggested as an environmentally‐friendly method to obtain oil from wild almond.     

Optimization of alkaline protease production from Shewanella oneidensis MR‐1 by response surface methodology

BACKGROUND: The proteases are among the most important groups of enzymes. Therefore, it is important to produce inexpensive and optimized media for large‐scale commercial production. In the present work, three different Shewanella species were screened on skim milk agar medium for their ability to produce alkaline protease. The effects of different culture conditions were optimized for alkaline protease production by S. oneidensis MR‐1 using a Box–Behnken design combined with response surface methodology (RSM). RESULTS: Highest yield (112.90 U mL^?1) of protease production was obtained at pH 9.0, a temperature of 30 °C, glucose (12.5 g L^?1), tryptone (12.5 g L^?1) and an incubation period of 36 h. A second‐order polynomial regression model was used for analysis of the experiment. The experimental values were in good agreement with predicted values, with correlation coefficient 0.9996. CONCLUSION: Carbon and nitrogen, pH, temperature and incubation period were chosen as the main factors to be used in an experimental design for optimization to produce low‐cost enzymes, potentially for use on an industrial scale. A 60% increase in enzyme activity was achieved in the optimized medium compared with the original medium. Copyright © 2008 Society of Chemical Industry     

Chemoselective hydrolysis of methyl 2‐acetoxybenzoate using free and entrapped esterase in K‐carrageenan beads

Porcine liver esterase was entrapped in natural polysaccharides K‐carrageenan and retention of its activity was determined using p‐nitrophenyl acetate as the substrate. The optimum pH for esterase activity of entrapped enzyme showed a little shift towards acidic side. Immobilized enzyme showed improved thermal and storage stability. The entrapped esterase retained 50% of its activity after eight repetitive cycles. Michaelis constant K_m for the free and entrapped enzymes was almost same indicting no conformational change during immobilization. Maximum velocity V_max was observed to decrease on immobilization. The free and entrapped esterase was used for selective hydrolysis of methyl 2‐acetoxybenzoate to methyl 2‐hydroxybenzoate in batch process as well as in a fixed bed reactor. The hydrolysis was observed to be 99% within 2 h for free as well as immobilized enzyme in batch process. The rate of hydrolysis was found to depend on pH. The turn over number of selective hydrolysis in batch and fixed bed reactor was 3.08 × 10⁶ and 1.19 × 10⁷, respectively. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Purification and characterization of thermophilic and alkalophilic tributyrin esterase fromBacillus strain A30-1 (ATCC 53841)

An extracellular esterase (EC 3.1.1.1) from a thermophilicBacillus A30-1 (ATCC 53841) was purified 139-fold to homogeneity by sodium chloride (6 M) treatment, ammonium sulfate fractionation (30–80%) and phenyl-Sepharose CL-6B column chromatography. The native enzyme was a single polypeptide chain with a molecular weight of about 65,000 and an isoelectric point at pH 4.8. The optimum pH for esterase activity was 9.0, and its pH stability range was 5.0–10.5. The optimum temperature for its activity was 60°C. The esterase had a half-life of 28 h at 50°C, 20 h at 60°C and 16 h at 65°C. It showed the highest activity on tributyrin, with little or no activity toward long-chain (12–20 carbon) fatty acid esters. The enzyme displayed K_m and K_cat values of 0.357 mM and 8365/min, respectively, for tributyrin hydrolysis at pH 9.0 and 60°C. Cyclodextrin (α, β, and γ), Ca²⁺, Co²⁺, Mg²⁺ and Mn²⁺ enhanced the esterase activity, and Zn²⁺ and Fe²⁺ acted as inhibitors of the enzyme activity. The enzyme activity was not affected by ethylenediaminetetraacetic acid, p-chloromercuribenzoate andN-bromosuccinimide. This paper was presented in part at the 82nd Annual Meeting and Exposition of the American Oil Chemists’ Society, held May 12–15, 1991, in Chicago, Illinois.     

Biochemical Characterization of Purified Esterase from Soybean (Glycine max) Seed

Alkaline esterase (carboxylic‐ester hydrolases; EC 3.1.1.1) extracted from germinated soybean seeds (Glycine max) was purified approximately 3.6 times by chromatography in a DEAE‐cellulose anion exchange column and filtration in Sephadex G100 gel. The molecular mass of the enzyme was estimated at 45 kDa by gel electrophoresis (SDS‐PAGE). The purified enzyme showed a specific activity of 5.6 U mg^?1 using p‐nitrophenyl butyrate as substrate. The esterase showed optimal activity at 47 °C in moderately alkaline pH, low stability in temperatures higher than 50 °C, and high stability at pH values between 6 and 9.5. The Ca²⁺ and Co²⁺ ions proved to have a positive effect on enzyme activity; however, Hg²⁺ completely inhibited esterase activity. Using p‐nitrophenyl butyrate as substrate, the enzyme showed a K_m of 0.39 mM, V_max of 31.5 mM mg^?1 min^?1 and k_cat 7.60 × 10⁶ s^?1. Regarding substrate affinity, the enzyme showed greater activity for substrates containing short‐chain fatty acids, especially p‐nitrophenyl acetate. Such characteristics give the enzyme great potential for application in the production of low molecular weight esters, in the food industry, and in chemical products. This enzyme is another new member of the family of lipases and esterases from vegetable seeds with high activity and stability in alkaline pH.     

Synthesis,characterization, and optimization of α‐Fe2O3/silica nanocomposites using homogenous precipitation method

The purpose of this study was to systematically synthesize and characterize the high surface area 10 wt% nanocomposites of α‐Fe₂O₃ (hematite)/silica using a simple and economically effective homogenous precipitation (HP) route via Response Surface Method combined with Central Composite Design (CCD). Accordingly, the RSM‐CCD approach including 20 experiments was designed to investigate the effects of three factors including concentration of iron chloride solution, pH and calcinations temperature on the final surface area of α‐Fe₂O₃/silica nanocomposites. The optimum surface area was 373 m²/g at the condition including iron chloride concentration of 0.018 mol/L, pH=8.95, and calcination temperature of 573°C.     

Polypropylene membranes with the double sensitivity effect

This article describes the modification of polypropylene membranes leading to the preparation of thermo‐ and pH‐sensitive structures. Poly(N‐isopropylacrylamide), poly(acrylic acid), or copolymer poly(N‐isopropylacrylamide‐co‐acrylic acid) was grafted on to the membranes' surface activated by dielectric barrier discharge plasma. The properties of the modified membranes were evaluated by means of infrared spectroscopy and contact angle measurements. The effect of modification was monitored by the determination of water flux at two temperatures (20 and 45°C) and at various pH values (2.8–8.0). The membrane separation properties were investigated for the solutions of o‐bromocresol purple. It was found that membranes grafted with copolymer were responsive to both stimuli and they could be used for separation purpose. The separation performance was tailored by alteration of pH and temperature of feed solution. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41763.     

Preparation,thermo‐optic property and transmission loss of chiral azobenzene polyurethane

A novel chiral azobenzene polyurethane (CAPU) was prepared from chromophore, chiral reagent L (?)‐tartaric acid and toluene diisocyanate (TDI). The chemical structure and the thermal property were characterized by UV‐Vis spectrum, FT‐IR, ¹H NMR, circular dichroism (CD) spectrum, differential scanning calorimeter (DSC) and thermogravimetric analysis (TGA). DSC and TGA experiments showed that the glass transition temperature (T_g) and the decomposition temperature (T_d) at 5% mass loss were 110°C and 199°C, respectively. The refractive index (n) and thermo‐optic coefficient (dn/dT) of the CAPU were measured at 650 nm wavelength and different temperature by attenuated total reflection (ATR) technique. By using CCD digital imaging devices, transmission loss of CAPU was measured and the value is 0.565dB/cm. The results will provide the foundation for many potential applications such as digital thermo‐optic switch materials and other fields in the future. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Catalytic potential of a poly(AAc‐co‐HPMA‐cl MBAm)‐matrix‐immobilized lipase from a thermotolerant Pseudomonas aeruginosa MTCC‐4713

A purified alkaline thermo‐tolerant lipase from Pseudomonas aeruginosa MTCC‐4713 was immobilized on a series of five noble weakly hydrophilic poly(AAc‐co‐HPMA‐cl MBAm) hydrogels. The hydrogel synthesized by copolymerizing acrylic acid and 2‐hydroxy propyl methacrylate in a ratio of 5 : 1 (HG_5:1 matrix) showed maximum binding efficiency for lipase (95.3%, specific activity 1.96 IU mg^?1 of protein). The HG_5:1 immobilized lipase was evaluated for its hydrolytic potential towards p‐NPP by studying the effect of various physical parameters and salt‐ions. The immobilized lipase was highly stable and retained ～92% of its original hydrolytic activity after fifth cycle of reuse for hydrolysis of p‐nitrophenyl palmitate at pH 7.5 and temperature 55°C. However, when the effect of pH and temperature was studied on free and bound lipase, the HG_5:1 immobilized lipase exhibited a shift in optima for pH and temperature from pH 7.5 and 55°C to 8.5 and 65°C in free and immobilized lipase, respectively. At 1 mM concentration, Fe³⁺, Hg²⁺, NH₄⁺, and Al³⁺ ions promoted and Co²⁺ ions inhibited the hydrolytic activities of free as well as immobilized lipase. However, exposure of either free or immobilized lipase to any of these ions at 5 mM concentration strongly increased the hydrolysis of p‐NPP (by ～3–4 times) in comparison to the biocatalysts not exposed to any of the salt ions. The study concluded that HG_5:1 matrix efficiently immobilized lipase of P. aeruginosa MTCC‐4713, improved the stability of the immobilized biocatalyst towards a higher pH and temperature than the free enzyme and interacted with Fe³⁺, Hg²⁺, NH₄⁺, and Al³⁺ ions to promote rapid hydrolysis of the substrate (p‐NPP). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4252–4259, 2006     

Comparison of thermo‐oxidative treatments for the anaerobic digestion of sewage sludge

BACKGROUND: In this study, various thermo‐oxidative treatments were examined and compared with the aim of overcoming the disadvantages of thermal treatment and enhancing the anaerobic digestion of sewage sludge. RESULTS: Oxygen, hydrogen peroxide and ozone were selected as oxidant, accompanied with the addition of either acid (HCl) or alkali (Na₂CO₃) for oxygen. The temperature and duration were fixed at 170 °C and 1 h, respectively. Anaerobically digested sludge was used as the substrate, to see the effects on the refractory part of sewage sludge. A batch methanogenesis test using 120 mL serum bottles was run at 35 °C for 20 days, and methane production, solids reduction, dewaterability and color intensity were measured. As the strength of the oxidants was increased, methane production tended to decrease, whereas solids reduction was increased. The dewaterability of the sludges and the color in the filtrates became worse for thermo‐oxidative treatment with oxygen and alkali. On the other hand, the dewaterability was improved significantly and color generation was restricted the most for the thermo‐oxidative treatment with oxygen and acid. CONCLUSION: Lowering the pH of thermo‐oxidative treatment is advantageous with respect to the dewaterability and color generation of digested sludge. Based on evaluation of the overall performance, thermo‐oxidative treatment with acid is considered the best among the thermo‐oxidative treatments examined. Copyright © 2008 Society of Chemical Industry     

A Composite Thermo‐Responsive Membrane System for Improved Controlled‐Release

A novel composite thermo‐responsive membrane system for improved controlled‐release is successfully developed. The membrane is composed of a porous membrane with grafted poly(N‐isopropylacrylamide) (PNIPAM) gates acting as functional valves, and a cross‐linked PNIPAM hydrogel inside the reservoir acting as the solute carrier. The thermo‐responsive controlled‐release characteristics of the proposed system are studied when the ambient temperature is continuously increased from 20 to 45 °C (across the LCST of PNIPAM) at a constant rate of 1.5 °C/min. The experimental results show that the prepared system exhibits significantly better performance for thermo‐responsive controlled‐release than single‐functional systems currently in existence, due to the cooperative action of the gating membrane and the inner cross‐linked hydrogel. Furthermore, due to the distinctive composite architecture, the proposed system can overcome some inherent disadvantages of current systems, such as the drug security problem of the reservoir‐type systems and the mechanical strength problem of the hydrogel matrix‐type systems. The system proposed in this study provides a new mode for thermo‐responsive controlled‐release.     

Temperature/pH dual responsive microgels of crosslinked poly(N‐vinylcaprolactam‐co‐undecenoic acid) as biocompatible materials for controlled release of doxorubicin

Undecenoic acid functionalized thermo/pH responsive microgels, poly(N‐vinylcaprolactam‐co‐undecenoic acid) [poly(VCL‐co‐UA)], were synthesized by precipitation emulsion copolymerization. The microgels exhibit reversible thermo/pH responsive phase transition behavior, which can be tuned by varying the monomer feed ratio. The lower critical solution temperatures (LCSTs) of the materials are close to body temperature. As a result, when temperatures rise above ca. 37°C, a rapid thermal gelation process occurs, accompanied by a phase transition, resulting in expulsion of encapsulated compound. In vitro experiment evaluated its applicability as a drug carrier for controlled release of an anticancer agent (doxorubicin) and showed that the drug encapsulation efficiency (EE), releasing rate, and kinetics are dependent on the temperature and pH value as expected. Minimal cytotoxicity of the microgels was observed by a cytotoxicity assay using 3T3 fibroblast cells. Our finding suggests that the poly(VCL‐co‐UA) based microgels may be considered a promising candidate for temperature or pH‐controlled delivery of anticancer drugs. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41146.     

Preparation of a promising whole cell biocatalyst of Geotrichum sp. lipase and its properties

BACKGROUND: As a new protein expression and self‐immobilization system, cell‐surface displayed enzymes have attracted increasing attention. In this study, Geotrichum sp. lipase (GSL), an important enzyme for the enrichment of polyunsaturated fatty acids (PUFAs), was first displayed on the cell surface of Saccharomyces cerevisiae. RESULTS: The activity of displayed GSL was higher (43.7 U g^?1 dry cell) than that of Candida antarctica lipase B (26.26 U g^?1 dry cell) and that of Rhizopus oryzae lipase (4.1 U g^?1 dry cell). It also exhibited higher thermostability than the free lipase, and retained 89% of the original activity after incubation at 40 °C for 3 h, compared with 48% at 35 °C for the free lipase at pH 8.5. Interestingly, the displayed lipase had a wider pH range and better pH stability. It had higher activity at all pH values than the free GSL, and retained 86% of the original activity in the pH range 9.5 to 10.5, whereas the activity of the free GSL could not be detected at pH 10. CONCLUSION: This work presented a method to prepare a whole‐cell biocatalyst with better stability and broader pH tolerance which will provide a useful strategy for other cost‐effective self‐immobilized industrial lipases. Copyright © 2011 Society of Chemical Industry     

Thermal,chemical and thermo‐chemical pre‐treatment of waste activated sludge for anaerobic digestion

The influence of different pre‐treatments was studied in order to observe the effects of temperature, pH and treatment time on Waste Activated Sludge (WAS) solubilization, and anaerobic digestion of pre‐treated sludge. Results showed that thermo‐chemical pre‐treatments were the most efficient on Chemical Oxygen Demand (COD) solubilization, which could reach 83% at 170 °C with pH = 12. Yet, increase in COD solubilization in thermo‐chemical pre‐treatment was not linked to an increase in soluble Volatile Solids (VS) as optimal conditions were 170 °C, and 130 °C with pH = 10, for this criterion. So, temperature was found to be the most influential parameter on COD and VS solubilization. Biodegradability batch anaerobic tests confirmed results obtained on WAS solubilization, that is to say that 170 °C and 130 °C with pH = 10 were optimal conditions, with respectively 45% and 21% of anaerobic digestion enhancement. Thus these two conditions were chosen for sludge treatment before continuous anaerobic digestion. Results, after stabilization have shown a better efficiency of 170 °C compared with 130 °C with pH = 10 pre‐treatment, since after anaerobic digestion it led to 71% of COD degradation and 59% of Total Solids (TS) degradation, with an improvement of 54% in biogas production. The main differences between those two pre‐treatments could be due to the pre‐treatments themselves more than to an effect on anaerobic digestion, because the first one led to a partial loss of WAS COD (near 17% of initial COD) and the second one to an increase in TS due to addition of base. Copyright © 2004 Society of Chemical Industry     

Production of a halotolerant lipase from Halomonas sp. strain C2SS100: Optimization by response-surface methodology and application in detergent formulations

The aim of this work was to optimize the production of a new lipase by a halotolerant bacterial strain Halomonas sp. C2SS100, by means of the response-surface methodology (RSM). The process parameters having the most significant effect on lipase production were identified using the Plackett–Burman screening design-of-experiments. Then, Box–Behnken design was applied to optimize lipase activity and the quadratic regression model of the lipase production was built. Indeed, the lipase yield was increased, and the value obtained experimentally (39 ± 2 U/ml) was very close to the rate predicted by the model (40.3 U/ml). Likewise, optimization of parameters by RSM resulted in 2.78-fold increase in lipase activity. These findings provide the first report on lipase production and optimization by a halotolerant bacterial strain belonging to Halomonas genus. Afterward, the biochemical properties of the produced lipase were studied for apply in oil stains removal. The crude lipase showed a maximum activity at 60°C and at pH ranging from 7 to 10. It displayed an important stability at high temperature, pH, and NaCl. Interestingly, this bacterial lipase exhibited a prominent stability toward some commercial solid and liquid detergents after 30 min of incubation at 50°C. The capability of the crude lipase to eliminate stain was ascertained on polycotton fabric pieces stained with lubricating oil. Whether with the addition of hot water alone or of a commercially available detergent, lipase is able to considerably boost the elimination of oil stains. The actual findings highlight the capacity of Halomonas sp. lipase for energy-efficient biocatalytic application.     

OPTIMIZATION OF PROCESS CONDITIONS USING RESPONSE SURFACE METHODOLOGY (RSM) FOR ETHANOL PRODUCTION FROM WASTE CASHEW APPLE JUICE BY ZYMOMONAS MOBILIS

Ethanol has been known for a long time, being perhaps the oldest product obtained through traditional biotechnology. It is an attractive, sustainable energy source for fuel additives. Based on a four-level central composite design (CCD) involving the variables substrate composition (20–100%) X₁, pH (4.5–6.5) X₂, incubation temperature (28°–36°C) X₃, and fermentation time (12–60 h) X₄, a response surface methodology (RSM) for the production of ethanol using waste cashew apple juice as substrate by Zymomonas mobilis MTCC 090 was standardized. The design contains a total of 31 experimental trials with the first 16 organized in a fractional factorial design and 25 to 31 involving the replications of the central points. Data obtained from RSM on ethanol production were subjected to the analysis of variance (ANOVA) and analyzed using a second-order polynomial equation, which resulted in the optimized process conditions of 62% (v/v) as substrate concentration, pH of 5.5, temperature of 32°C, and fermentation time of 37 h. Maximum ethanol concentration (12.64 g/L) was obtained at the optimized conditions in an anaerobic batch fermentation.     

Modeling of degradation of unstabilized and HALS‐stabilized LDPE films under thermo‐oxidation and natural weathering conditions

Mathematical models are proposed to predict degradation of unstabilized low density polyethylene (LDPE) films and those stabilized with hindered amine light stabilizers (HALS) under both thermo‐oxidation at 90°C and natural weathering conditions. The degradation was measured by change in percent elongation at break (?_r) with time. The mathematical approach developed was multiple linear regression analysis (MLRA). The reliability of the selected models was analysed using four statistical criteria, residual variance, coefficient of determination (r²), Student test and Fisher‐Snedecor test. The linear systems that resulted from the MLRA were resolved by the Cholesky method. The results obtained indicated that the polynomial models developed to predict elongation at break were reliable for both unstabilized and HALS‐stabilized samples under thermo‐oxidation at 90°C and natural weathering conditions. This was also confirmed by the comparison of the half‐life time (HLT) values predicted from the models with those observed experimentally. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 3284–3292, 2001     

Covalent immobilization of trypsin onto thermo‐sensitive poly(N‐isopropylacrylamide‐co‐acrylic acid) microspheres with high activity and stability

Poly(N‐isopropylacrylamide‐co‐acrylic acid) (P(NIPAM‐co‐AA)) microspheres with a high copolymerized AA content were fabricated using rapid membrane emulsification technique. The uniform size, good hydrophilicity, and thermo sensitivity of the microspheres were favorable for trypsin immobilization. Trypsin molecules were immobilized onto the microspheres surfaces by covalent attachment. The effects of various parameters such as immobilization pH value, enzyme concentration, concentration of buffer solution, and immobilization time on protein loading amount and enzyme activity were systematically investigated. Under the optimum conditions, the protein loading was 493 ± 20 mg g^?1 and the activity yield of immobilized trypsin was 155% ± 3%. The maximum activity (V_max) and Michaelis constant (K_m) of immobilized enzyme were found to be 0.74 μM s^?1 and 0.54 mM, respectively. The immobilized trypsin showed better thermal and storage stability than the free trypsin. The enzyme‐immobilized microspheres with high protein loading amount still can show a thermo reversible phase transition behavior. The research could provide a strategy to immobilize enzyme for application in proteomics. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43343.     

Lipase‐mediated methanolysis of soybean oils for biodiesel production

BACKGROUND: Biodiesel is increasingly perceived as an important component of solutions to the important current issues of fossil fuel shortages and environmental pollution. Biocatalysis of soybean oils using soluble lipase offers an alternative approach to lipase‐catalyzed biodiesel production using immobilized enzyme or whole‐cell catalysis. The central composite design (CCD) of response surface methodology (RSM) was used here to evaluate the effects of enzyme concentration, temperature, molar ratio of methanol to oil and stirring rate on the yield of fatty methyl ester. RESULTS: Lipase NS81006 from a genetically modified Aspergillus oryzae was utilized as the catalyst for the transesterification of soybean oil for biodiesel production. The experimental data showed that enzyme concentration, molar ratio of methanol to oil and stirring rate had the most significant impact on the yield of fatty methyl ester; a quadratic polynomial equation was obtained for methyl ester yield by multiple regression analysis. The predicted biodiesel yield was 0.928 (w/w) under the optimal conditions and the subsequent verification experiments with biodiesel yield of 0.936 ± 0.014 (w/w) confirmed the validity of the predicted model. CONCLUSION: RSM and CCD were suitable techniques to optimize the transesterification of soybean oil for biodiesel production by soluble lipase NS81006. The related lipase NS81006 reuse stability, chemical or genetic modification, and transesterification mechanism should be taken into consideration. Copyright © 2007 Society of Chemical Industry