共查询到20条相似文献,搜索用时 31 毫秒
1.
In life cycle assessment (LCA) of solar PV systems, energy pay back time (EPBT) is the commonly used indicator to justify its primary energy use. However, EPBT is a function of competing energy sources with which electricity from solar PV is compared, and amount of electricity generated from the solar PV system which varies with local irradiation and ambient conditions. Therefore, it is more appropriate to use site-specific EPBT for major decision-making in power generation planning. LCA and life cycle cost analysis are performed for a distributed 2.7 kWp grid-connected mono-crystalline solar PV system operating in Singapore. This paper presents various EPBT analyses of the solar PV system with reference to a fuel oil-fired steam turbine and their greenhouse gas (GHG) emissions and costs are also compared. The study reveals that GHG emission from electricity generation from the solar PV system is less than one-fourth that from an oil-fired steam turbine plant and one-half that from a gas-fired combined cycle plant. However, the cost of electricity is about five to seven times higher than that from the oil or gas fired power plant. The environmental uncertainties of the solar PV system are also critically reviewed and presented. 相似文献
2.
Brazil has to expand its power generation capacities due to significant projected growth of demand. The government aims at adding hydropower capacities in North–Brazil, additional to wind and thermal power generation. However, new hydropower may affect environmentally and socially sensitive areas in the Amazon region negatively while thermal power generation produces greenhouse gas emissions. We therefore assess how future greenhouse gas emissions from electricity production in Brazil can be minimized by optimizing the daily dispatch of photovoltaic (PV), wind, thermal, and hydropower plants. Using a simulation model, we additionally assess the risk of loss of load. Results indicate that at doubled demand in comparison to 2013, only 2% of power production has to be provided by thermal power. Existing reservoirs of hydropower are sufficient to balance variations in renewable electricity supply at an optimal mix of around 37% of PV, 9% of wind, and 50% of hydropower generation. In a hydro-thermal only scenario, the risk of deficit increases tenfold, and thermal power production four-fold. A sensitivity analysis shows that the choice of meteorological data sets used for simulating renewable production affects the choice of locations for PV and wind power plants, but does not significantly change the mix of technologies. 相似文献
3.
The shift to a low carbon society is an issue of highest priority in the EU. For electricity generation, such a target counts with three main alternatives: renewable energies, nuclear power and carbon capture and storage. This paper focuses on the renewables’ alternative. Due to resource availability, a technology mix with a high share of PV and wind power is gaining increasing interest as a major solution for several EU member states and in part for the EU collectively to achieve decarbonization and energy security with acceptable costs. Due to their intermittency, the integration of high shares of PV and wind power in the electricity supply is challenging. This paper presents a techno-economic assessment of technology mix alternatives with a high share of PV and wind power in Spain, as an example. Thereby, the focus is on the option of increasing wind curtailment versus substituting rigid baseload generation in favor of the more flexible gas turbines and combined cycle gas turbines. 相似文献
4.
《全球能源互联网(英文)》2018,1(3):301-311
National and international policies encourage increased penetration of solar and wind energy into electrical networks in order to reduce greenhouse gas emission. Solar radiation and wind speed variations complicate the integration of wind and solar generation into power systems and delay the transition of these sources from centralized to distributed energy sources. The increased penetration of nontraditional energy sources into the electric grid stimulates the demand for large capacities in the field of energy storage. A mathematical model, which describes the operation of a proposed hybrid system, including solar PV, wind energy, and a pumped storage hydroelectric power plant is developed in this paper. This hydropower plant utilizes seawater as a lower reservoir, and only a tank has to be built in order to reduce the installation cost of the storing system. The pumped storage power plant used for compensation of the variation of the output energy from the PV and wind power plants by discharging water from the upper reservoir, which is previously pumped in the case of surplus energy from PV and wind turbine power plants. The impact of the proposed system on the grid utility is investigated in accordance with the values of energy exchange (deficits and surpluses of energy) between the considered hybrid system and the grid. The optimum design is determined by the pump and turbine capacities, upper reservoir volume, and the volume of water left in the tank for emergencies. Different scenarios of the optimum operations are presented for analysis. The results obtained from the examined scenarios indicate the ability of such a hybrid energy system to reduce the exchange of energy with the grid. This paper indicates the technical feasibility of seawater pumped-storage hydropower plant for increasing the Egyptian national grid’s ability to accept high integration of renewable energy sources. 相似文献
5.
A completely renewable baseload electricity generation system is proposed by combining wind energy, compressed air energy storage, and biomass gasification. This system can eliminate problems associated with wind intermittency and provide a source of electrical energy functionally equivalent to a large fossil or nuclear power plant. Compressed air energy storage (CAES) can be economically deployed in the Midwestern US, an area with significant low-cost wind resources. CAES systems require a combustible fuel, typically natural gas, which results in fuel price risk and greenhouse gas emissions. Replacing natural gas with synfuel derived from biomass gasification eliminates the use of fossil fuels, virtually eliminating net CO2 emissions from the system. In addition, by deriving energy completely from farm sources, this type of system may reduce some opposition to long distance transmission lines in rural areas, which may be an obstacle to large-scale wind deployment. 相似文献
6.
This paper examines a comparative assessment in terms of CO2 emissions from a hydrogen passenger train in Ontario, Canada, particularly comparing four specific propulsion technologies: (1) conventional diesel internal combustion engine (ICE), (2) electrified train, (3) hydrogen ICE, and (4) hydrogen PEM fuel cell (PEMFC) train. For the electrified train, greenhouse gases from electricity generation by natural gas and coal-burning power plants are taken into consideration. Several hydrogen production methods are also considered in this analysis, i.e., (1) steam methane reforming (SMR), (2) thermochemical copper–chlorine (Cu–Cl) cycle supplied partly by waste heat from a nuclear plant, (3) renewable energies (solar and wind power) and (4) a combined renewable energy and copper–chlorine cycle. The results show that a PEMFC powertrain fueled by hydrogen produced from combined wind energy and a copper–chlorine plant is the most environmentally friendly method, with CO2 emissions of about 9% of a conventional diesel train or electrified train that uses a coal-burning power plant to generate electricity. Hydrogen produced with a thermochemical cycle is a promising alternative to further reduce the greenhouse gas emissions. By replacing a conventional diesel train with hydrogen ICE or PEMFC trains fueled by Cu-Cl based-hydrogen, the annual CO2 emissions are reduced by 2260 and 3318 tonnes, respectively. A comparison with different types of automobile commuting scenarios to carry an equivalent number of people as a train is also conducted. On an average basis, only an electric car using renewable energy-based electricity that carries more than three people may be competitive with hydrogen trains. 相似文献
7.
This paper addresses the annual energy storage requirements of small islanded electricity systems with wind and photovoltaic (PV) generation, using hourly demand and resource data for a range of locations in New Zealand. Normalised storage capacities with respect to annual demand for six locations with winter-peaking demand profiles were lower for wind generation than for PV generation, with an average PV:wind storage ratio of 1.768:1. For two summer-peaking demand profiles, normalised storage capacities were lower for PV generation, with storage ratios of 0.613:1 and 0.455:1. When the sensitivity of storage was modelled for winter-peaking demand profiles, average storage ratios were reduced. Hybrid wind/PV systems had lower storage capacity requirements than for wind generation alone for two locations. Peak power for storage charging was generally greater with PV generation than with wind generation, and peak charging power increased for the hybrid systems. The results are compared with those for country-scale electricity systems, and measures for minimising storage capacity are discussed. It is proposed that modelling of storage capacity requirements should be included in the design process at the earliest possible stage, and that new policy settings may be required to facilitate a transition to energy storage in fully renewable electricity systems. 相似文献
8.
An overview of the environmental,economic, and material developments of the solar and wind sources coupled with the energy storage systems
下载免费PDF全文
![点击此处可从《国际能源研究杂志》网站下载免费的PDF全文](/ch/ext_images/free.gif)
There is a constant growth in energy consumption and consequently energy generation around the world. During the recent decades, renewable energy sources took heed of scientists and policy makers as a remedy for substituting traditional sources. Wind and photovoltaic (PV) are the least reliable sources because of their dependence on wind speed and irradiance and therefore their intermittent nature. Energy storage systems are usually coupled with these sources to increase the reliability of the hybrid system. Environmental effects are one of the biggest concerns associated with the renewable energy sources. This study summarizes the last and most important environmental and economic analysis of a grid‐connected hybrid network consisting of wind turbine, PV panels, and energy storage systems. Focusing on environmental aspects, this paper reviews land efficiency, shaded analysis of wind turbines and PV panels, greenhouse gas emission, wastes of wind turbine and PV panels' components, fossil fuel consumption, wildlife, sensitive ecosystems, health benefits, and so on. A cost analysis of the energy generated by a hybrid system has been discussed. Furthermore, this study reviews the latest technologies for materials that have been used for solar PV manufacturing. This paper can help to make a right decision considering all aspects of installing a hybrid system. Copyright © 2017 John Wiley & Sons, Ltd. 相似文献
9.
Generation unit sizing and cost analysis for stand-alone wind,photovoltaic, and hybrid wind/PV systems 总被引:11,自引:0,他引:11
Kellogg W.D. Nehrir M.H. Venkataramanan G. Gerez V. 《Energy Conversion, IEEE Transaction on》1998,13(1):70-75
This paper presents the results of investigations on the application of wind, photovoltaic (PV), and hybrid wind/PV power generating systems for utilization as stand-alone systems. A simple numerical algorithm has been developed for generation unit sizing. It has been used to determine the optimum generation capacity and storage needed for a stand-alone, wind, PV, and hybrid wind/PV system for an experimental site in a remote area in Montana with a typical residential load. Generation and storage units for each system are properly sized in order to meet the annual load and minimize the total annual cost to the customer. In addition, an economic analysis has been performed for the above three scenarios and is used to justify the use of renewable energy versus constructing a line extension from the nearest existing power line to supply the load with conventional power. Annual average hourly values for load, wind speed, and insolation have been used 相似文献
10.
A life cycle impact analysis of various hydrogen production methods for public transportation sector
《International Journal of Hydrogen Energy》2022,47(93):39666-39677
Reducing greenhouse gas emissions is an important task to reduce the adverse effects of climate change. A large portion of greenhouse gas emissions apparently originates from the transportation sector. Therefore, adopting cleaner technologies with lower emission footprints has become vital. For this reason, in this study, a life cycle impact analysis of hydrogen production technologies as an alternative to fossil fuels and the utilization of hydrogen in fuel cell electric buses is carried out. According to the results of this study, the operational contributions of internal combustion engines have a significant impact on life cycle impact analysis indicators. The global warming potentials of clean hydrogen production technologies result in much lower results compared to conventional hydrogen production technologies. Also, almost all indicators for biohydrogen production technologiess yield lower results because of the wastewater removal. The global warming potential results of hydrogen production methods are found to be 6.8, 1.9, 2.1, 0.5, 0.2, and 7.9 kg CO2 eq./kg H2 for PV electrolysis, wind electrolysis, high temperature electrolysis, dark fermentation, photo fermentation and conventional hydrogen production, respectively. However, the chemicals used in PV and wind turbine production increased the ecotoxicological indicators. On the other hand, hydrogen utilization in buses is a better option environmentally. The global warming potentials for PV electrolysis, wind electrolysis, high temperature electrolysis, dark fermentation, photo fermentation, conventional hydrogen, compressed natural gas bus, and diesel bus are found to be 0.060, 0.016, 0.018, 0.007, 0.006, 0.053, 0.082, and 0.125 kg CO2 eq./p.km, respectively. The results are especially important in terms of reducing the effects at the source and optimizing the systems. 相似文献
11.
The UK electricity mix will change significantly in the future. This provides an opportunity to consider the full life cycle sustainability of the options currently considered as most suitable for the UK: gas, nuclear, offshore wind and photovoltaics (PV). In an attempt to identify the most sustainable options and inform policy, this paper applies a sustainability assessment framework developed previously by the authors to compare these electricity options. To put discussion in context, coal is also considered as a significant contributor to the current electricity supply. Each option is assessed and compared in terms of its economic, environmental and social implications, using a range of sustainability indicators. The results show that no one technology is superior and that certain trade‐offs must be made. For example, nuclear and offshore wind power have the lowest life cycle environmental impacts, except for freshwater ecotoxicity for which gas is the best option; coal and gas are the cheapest options (£74 and 66/MWh, respectively, at 10% discount), but both have high global warming potential (1072 and 379 g CO2 eq./kWh); PV has relatively low global warming potential (88 g CO2 eq./kWh) but high cost (£302/MWh), as well as high ozone layer and resource depletion. Nuclear, wind and PV increase some aspects of energy security: in the case of nuclear, this is due to inherent fuel storage capabilities (energy density 290 million times that of natural gas), whereas wind and PV decrease fossil fuel import requirements by up to 0.2 toe/MWh. However, all three options require additional installed capacity for grid management. Nuclear also poses complex risk and intergenerational questions such as the creation of 10.16 m3/TWh of nuclear waste for long‐term geological storage. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
12.
Following on from the Fukushima Daiichi nuclear power plant accident, the Japanese government is now in the throes of reviewing its power policy. Under continuing policies of economic revival and greenhouse gas reduction, it is crucial to consider scenarios for the country to realize reliable, low‐carbon, and economic electricity systems in the future. On the other hand, the social acceptance of nuclear power will affect the final political decision significantly. Therefore, in the present study, proposed power generation scenarios in Japan in light of the Fukushima accident were reviewed comprehensively from economic, environmental, technological, resource, security, and social perspectives. The review concludes that in Japan, (i) renewable energy mainly solar and wind needs to be developed as fast as possible subject to various constraints, (ii) more gas power plants will be used to absorb the fluctuations of intermittent renewable energy and supply electricity gap, (iii) nuclear power will be reduced in the future, but a 0% nuclear power scenario by 2030 is unlikely to be a reasonable choice on most measures and (iv) the effective communication with the public is vital important. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
13.
《Energy Policy》2014
Maximizing renewables in the country's power system has been a key political agenda in Japan after the Fukushima nuclear disaster. This paper investigates the potential of PV resource, which could be systematically integrated into the Japanese power system, using a high time-resolution optimal power generation mix model. The model allows us to explicitly consider actual PV and wind output variability in 10-min time resolution for 365 days. Simulation results show that, as PV expands, the growth of PV integration into the grid slows down when the installed PV capacity is more than the scale of the peak demand, although Japan has immense potential of installable PV capacity – equivalent to 40 times of the peak. Secondly, the results imply that a large-scale PV integration potentially decreases the usage ratio of LNG combined cycle (LNGCC) in specific seasons, which is a challenge for utility companies to ensure that LNGCC is used as a profitable compensating generator for PV variability. Finally, a sensitivity analysis on rechargeable battery cost suggests that the reason for suppressing the PV output instead of storing its surplus output by the battery can be attributed to the high battery cost; hence, the improvement of its economic performance is significant to integrate the massive PV energy. 相似文献
14.
Shaheen Hasan Chowdhury Amanullah Maung Than Oo 《Renewable & Sustainable Energy Reviews》2012,16(9):6879-6887
Nowadays renewable sources are being used as clean sources to generate electricity and to reduce the dependency on fossil fuels. The uses of renewable sources are being increased in electricity generation and contributed to reduce the greenhouse gas emission. The function of any electrical power system is to connect everyone sufficiently, clean electric power anywhere and anytime of the country. This can be achieved through a modern power system by integrating electrical energy from clean renewable sources into the nation's electric grid to enhance reliability, efficiency and security of the power system. The paper on the status of review the driving force of the generation of renewable energy and proposing electrical energy generation from renewable sources to be ensured at least 20% of total energy of Australia. This paper has been studied the existing electricity generation capacity of Australia from renewable and non-renewable sources. Optimal electricity generation from renewable sources has been examined. The environmental impact of electricity generation from renewable sources has been considered. Under this paper the yearly average wind data of past 20 years and above for some meteorological stations of Australia have been used. The prospective electricity generation from wind turbines and solar photovoltaic panels has been proposed in the paper that will increase electrical energy of the power grid of Australia. It was estimated the capital cost of prospective electricity generation farms from wind and solar PV sources. 相似文献
15.
Jeffery B. Greenblatt Samir Succar David C. Denkenberger Robert H. Williams Robert H. Socolow 《Energy Policy》2007
The economic viability of producing baseload wind energy was explored using a cost-optimization model to simulate two competing systems: wind energy supplemented by simple- and combined cycle natural gas turbines (“wind+gas”), and wind energy supplemented by compressed air energy storage (“wind+CAES”). Pure combined cycle natural gas turbines (“gas”) were used as a proxy for conventional baseload generation. Long-distance electric transmission was integral to the analysis. Given the future uncertainty in both natural gas price and greenhouse gas (GHG) emissions price, we introduced an effective fuel price, pNGeff, being the sum of the real natural gas price and the GHG price. Under the assumption of pNGeff=$5/GJ (lower heating value), 650 W/m2 wind resource, 750 km transmission line, and a fixed 90% capacity factor, wind+CAES was the most expensive system at ¢6.0/kWh, and did not break even with the next most expensive wind+gas system until pNGeff=$9.0/GJ. However, under real market conditions, the system with the least dispatch cost (short-run marginal cost) is dispatched first, attaining the highest capacity factor and diminishing the capacity factors of competitors, raising their total cost. We estimate that the wind+CAES system, with a greenhouse gas (GHG) emission rate that is one-fourth of that for natural gas combined cycle plants and about one-tenth of that for pulverized coal plants, has the lowest dispatch cost of the alternatives considered (lower even than for coal power plants) above a GHG emissions price of $35/tCequiv., with good prospects for realizing a higher capacity factor and a lower total cost of energy than all the competing technologies over a wide range of effective fuel costs. This ability to compete in economic dispatch greatly boosts the market penetration potential of wind energy and suggests a substantial growth opportunity for natural gas in providing baseload power via wind+CAES, even at high natural gas prices. 相似文献
16.
The specific needs and ensuing costs for wind power integration into electricity generation systems depend to a large extent on the operation, composition and behaviour of the electricity generation system. The differences in the considered systems greatly influence the outcomes regarding wind power integration. The generation mix is studied here. Analyses are performed using a mixed integer linear programming model so as to get more insight in the consequences of the design and operation of electricity generation systems including wind power by looking at three distinct case systems. The model takes into account a multitude of technical specificities of the operation of an electricity generation system. The results show several aspects that are strongly related to the composition of electricity generation systems that influence the integration of wind power in the systems. These aspects range from the composition of the system to more specific technical parameters of the power plants and their operation, such as the marginal power plant and the greenhouse gas emission levels. The results shed some light on the reasons for the divergence in wind power integration studies. Moreover, it can help in gaining insights in the future development of electricity generation systems where wind power is being introduced. 相似文献
17.
《International Journal of Hydrogen Energy》2020,45(20):11460-11470
A technico-economic analysis based on integrated modeling, simulation, and optimization approach is used in this study to design an off grid hybrid solar PV/Fuel Cell power system. The main objective is to optimize the design and develop dispatch control strategies of the standalone hybrid renewable power system to meet the desired electric load of a residential community located in a desert region. The effects of temperature and dust accumulation on the solar PV panels on the design and performance of the hybrid power system in a desert region is investigated. The goal of the proposed off-grid hybrid renewable energy system is to increase the penetration of renewable energy in the energy mix, reduce the greenhouse gas emissions from fossil fuel combustion, and lower the cost of energy from the power systems. Simulation, modeling, optimization and dispatch control strategies were used in this study to determine the performance and the cost of the proposed hybrid renewable power system. The simulation results show that the distributed power generation using solar PV and Fuel Cell energy systems integrated with an electrolyzer for hydrogen production and using cycle charging dispatch control strategy (the fuel cell will operate to meet the AC primary load and the surplus of electrical power is used to run the electrolyzer) offers the best performance. The hybrid power system was designed to meet the energy demand of 4500 kWh/day of the residential community (150 houses). The total power production from the distributed hybrid energy system was 52% from the solar PV, and 48% from the fuel cell. From the total electricity generated from the photovoltaic hydrogen fuel cell hybrid system, 80.70% is used to meet all the AC load of the residential community with negligible unmet AC primary load (0.08%), 14.08% is the input DC power for the electrolyzer for hydrogen production, 3.30% are the losses in the DC/AC inverter, and 1.84% is the excess power (dumped energy). The proposed off-grid hybrid renewable power system has 40.2% renewable fraction, is economically viable with a levelized cost of energy of 145 $/MWh and is environmentally friendly (zero carbon dioxide emissions during the electricity generation from the solar PV and Fuel Cell hybrid power system). 相似文献
18.
We have developed a model to assess the life cycle greenhouse emissions of compressed natural gas–hydrogen (CNG–H2) mixtures used for transportation in Argentina. The overall fuel life cycle is assessed through a well-to-wheel (WTW) analysis for different hydrogen generation and distribution options. The combustion stage in road vehicles is modeled using the COPERT IV model. Hydrogen generation options include classical steam methane reforming (SMR) and water electrolysis (WE) in central plants and distributed facilities at the refueling stations. Centralized hydrogen generation by electrolysis in nuclear plants as well as the use of solar photovoltaic and wind electricity is also considered. Hydrogen distribution options include gas pipeline and refrigerated truck transportation for liquefied hydrogen. A total number of fifteen fuel pathways are studied; in all the cases the natural gas–hydrogen mixture is made at the refueling station. The use of WE using nuclear or wind electricity appears to be less contaminant that the use of pure CNG. 相似文献
19.
《International Journal of Hydrogen Energy》2019,44(19):9558-9576
Decarbonization of the power sector is a key step towards greenhouse gas emissions reduction. Due to the intermittent nature of major renewable sources like wind and solar, storage technologies will be critical in the future power grid to accommodate fluctuating generation. The storage systems will need to decouple supply and demand by shifting electrical energy on many different time scales (hourly, daily, and seasonally). Power-to-Gas can contribute on all of these time scales by producing hydrogen via electrolysis during times of excess electrical generation, and generating power with high-efficiency systems like fuel cells when wind and solar are not sufficiently available. Despite lower immediate round-trip efficiency compared to most battery storage systems, the combination of devices used in Power-to-Gas allows independent scaling of power and energy capacities to enable massive and long duration storage. This study develops and applies a model to simulate the power system balance at very high penetration of renewables. Novelty of the study is the assessment of hydrogen as the primary storage means for balancing energy supply and demand on a large scale: the California power system is analyzed to estimate the needs for electrolyzer and fuel cell systems in 100% renewable scenarios driven by large additions of wind and solar capacities. Results show that the transition requires a massive increase in both generation and storage installations, e.g., a combination of 94 GW of solar PV, 40 GW of wind, and 77 GW of electrolysis systems. A mix of generation technologies appears to reduce the total required capacities with respect to wind-dominated or solar-dominated cases. Hydrogen storage capacity needs are also evaluated and possible alternatives are discussed, including a comparison with battery storage systems. 相似文献
20.
The economics of renewable energy are the largest barrier to renewable penetration. Nevertheless, the strong desire to reduce environmental emissions is considered a great support for renewable energy sources. In this paper, a full analysis for the cost of the kWh of electricity generated from different systems actually used in Egypt is presented. Also renewable energy systems are proposed and their costs are analyzed. The analysis considers the external cost of emissions from different generating systems. A proposed large scale PV plant of 3.3 MW, and a wind farm 11.25 MW grid connected at different sites are investigated. A life cycle cost analysis for each system was performed using the present value criterion. The comparison results showed that wind energy generation has the lowest cost, followed by a combined cycle–natural gas fired system. A photovoltaic system still uses comparatively expensive technology for electricity generation; even when external costs are considered the capital cost of photovoltaic needs to be reduced by about 60% in order to be economically competitive. 相似文献