基于非线性增益递归滑模的船舶轨迹跟踪动态面自适应控制

针对三自由度全驱动船舶存在模型不确定和未知外部环境扰动的情况,设计出一种基于非线性增益递归滑模的船舶轨迹跟踪动态面自适应神经网络控制方法.该方法综合考虑船舶位置和速度误差之间关系设计递归滑模面,引入神经网络对船舶模型不确定部分进行逼近,设计带σ-修正泄露项的自适应律对神经网络逼近误差与外界环境扰动总和的界进行估计,并应用一种非线性增益函数构造动态面控制律,选取李雅普诺夫函数证明了该控制律能够保证轨迹跟踪闭环系统内所有信号的一致最终有界性.最后,基于一艘供给船进行仿真验证,结果表明,船舶轨迹跟踪响应速度快、精度高,所设计控制器对系统模型参数摄动及外界扰动具有较强的鲁棒性.     

基于神经网络观测器的船舶轨迹跟踪递归滑模 动态面输出反馈控制

针对三自由度全驱动船舶速度向量不可测问题,考虑船舶模型参数和外部环境扰动均未知的情况,提出一种基于神经网络观测器的船舶轨迹跟踪递归滑模动态面输出反馈控制方法.该方法设计神经网络自适应观测器估计船舶速度向量,且利用神经网络逼近模型参数不确定项,综合考虑船舶位置和速度误差之间关系构造递归滑模面,再采用动态面控制技术设计轨迹跟踪控制律和参数自适应律,并引入低频增益学习方法消除外界扰动导致的高频振荡控制信号.选取李雅普诺夫函数证明了该控制律能够保证轨迹跟踪闭环系统内所有信号的一致最终有界性.最后,基于一艘供给船进行仿真验证,结果表明,船舶轨迹跟踪响应速度快,所设计控制器对系统模型参数摄动及外界扰动具有较强的鲁棒性.     

基于扩张观测器的欠驱动船舶轨迹跟踪低频学习自适应动态面输出反馈控制

针对速度不可测的三自由度欠驱动船舶轨迹跟踪控制问题,考虑船舶存在模型参数不确定项以及外界环境干扰未知情况,提出一种基于扩张观测器的欠驱动船舶轨迹跟踪低频学习自适应动态面输出反馈控制策略.该策略构造扩张观测器估计船舶速度向量,利用神经网络算法逼近模型参数不确定项,然后采用动态面控制技术避免对虚拟控制律直接求导,简化控制律计算过程,并引入低频增益学习技术消除外界扰动导致控制信号产生高频振荡,最后选取李雅普诺夫函数证明该控制律能够保证船舶跟踪闭环系统中所有误差信号一致最终有界.仿真结果表明,本文所设计控制器对船舶模型参数不确定项及外界环境干扰具有较强的鲁棒性,能够实现对船舶轨迹的有效跟踪.     

3 DoF模块化机械臂轨迹跟踪策略

针对具有外部扰动和系统参数不确定的机械臂轨迹跟踪控制问题,提出了一种改进的自适应神经网络滑模跟踪控制方法.首先建立了三自由度(DoF)机械臂动力学模型,分别采用计算力矩法和基于改进趋近律的神经滑模控制法控制其名义部分和非名义部分.所提方法结合了径向基函数(RBF)神经网络与基于趋近律的滑模控制,使控制系统自适应地补偿机...     

小型无人直升机反步自适应控制

针对具有强非线性、高度耦合以及参数不确定性特点的小型无人直升机系统,提出一种基于小脑模型关节控制器（Cerebellar Model Articulation Control,CMAC）神经网络的自适应反步控制方法,该方法采用小脑模型关节控制器神经网络在线学习系统不确定性以及反步控制中各阶虚拟控制量的导数信息,设计鲁棒控制项克服CMAC神经网络在线学习系统不确定性的误差,控制律由反步法回归递推得到。仿真结果表明,在模型参数不确定和存在较大误差的情况下,所设计的控制律具有理想的姿态跟踪性能以及良好的鲁棒性。     

基于神经网络的无人机姿态自适应控制仿真

针对四旋翼无人机姿态控制中模型不完整、部分参数和扰动不确定的问题,提出了一种基于神经网络的自适应控制方法,采用RBF神经网络对无人机姿态动力学模型中不确定和扰动部分进行学习,设计了以类反步法为基础,包含反馈控制和神经网络控制的自适应控制器,实现了对未知动态的准确逼近,解决了传统控制方法中过于依赖精确模型的问题。同时设计了神经网络的权值自适应律,实现了控制过程中的在线学习和调整,并且通过李雅普诺夫方法证明了闭环系统的稳定性。仿真结果表明,在存在较大扰动的情况下,上述控制器可得到很好的控制效果,可以实现误差的快速收敛,具有较好的鲁棒性和自适应性。     

改进的非线性鲁棒自适应动态面控制

针对不确定多输入多输出严格反馈块控非线性系统,提出一种鲁棒自适应动态面控制方法.该方法在反推自适应神经网络控制中引入动态面控制简化控制律,同时对自适应律进行改进以改善系统的过渡过程动态品质,保证了系统在简化的控制律下仍具有良好的动态特性.通过Lyapunov方法证明了闭环系统所有信号均有界,系统的跟踪误差指数收敛到有界紧集内.最后给出的某新型战斗机六自由度仿真结果表明了该方法的有效性.     

基于控制性能的MIMO非线性系统动态面控制

针对一类不确定非线性MIMO(multiple-input multiple-output)系统,在动态面控制方法的基础上,提出了自适应跟踪控制方案.通过引入性能函数和输出误差转换,保证输出信号具有指定的跟踪速度、跟踪误差、最大超调量.为了避免控制奇异问题,采用神经网络直接逼近期望控制信号.该方案无需估计神经网络的权值,仅对1个参数进行自适应律设计.理论证明了闭环系统所有信号有界,仿真结果验证了所提方案的有效性.     

输入受限的非仿射无人帆船航向系统自适应动态面控制

针对输入受限和控制方向未知的无人帆船航向控制问题,考虑系统模型存在动态不确定和未知外界扰动的情况,本文提出一种基于非仿射航向运动数学模型的最小参数自适应递归滑模动态面控制策略.该策略通过Taylor展开方法将非仿射模型转化为具有线性结构的仿射时变系统,采用最小参数学习(minimal learning parameter,MLP)神经网络逼近无人帆船模型不确定部分,并利用双曲正切函数处理控制输入饱和现象,引入Nussbaum函数处理系统中未知控制方向问题,同时综合考虑帆船艏摇角速度误差和航向误差之间关系设计递归滑模动态面舵角控制律,并设计参数自适应律对神经网络逼近误差与复合干扰总和的界进行估计.选取李雅普诺夫函数证明了所设计控制器能够保证航向闭环系统内所有信号的一致最终有界性.最后,基于一艘12 m无人帆船进行仿真验证,结果表明无人帆船航向控制响应速度快,所设计的控制器能有效地处理模型不确定项和风浪等外界扰动,具有较强的鲁棒性.     

多关节机械臂轨迹跟踪自适应神经网络滑模控制

针对不确定干扰和建模误差对多关节机械臂轨迹跟踪控制系统造成的不良影响,对基于滑模控制的自适应神经网络滑模控制算法进行了研究。通过神经网络,对多关节机械臂轨迹跟踪控制系统的不确定干扰和建模误差进行逼近。添加自适应项,补偿神经网络滑模控制中神经网络模型对系统中的不确定干扰和建模误差的逼近误差。设计了具有指数趋近律的滑模面,以提升多关节机械臂轨迹跟踪控制系统的鲁棒性和响应速度。使用李雅普诺夫稳定性理论,证明了多关节机械臂轨迹跟踪控制系统的半全局稳定性,并通过MATLAB对理论结果进行了仿真验证。仿真结果表明,对具有不确定干扰和建模误差的多关节机械臂轨迹跟踪控制系统,采用该算法进行轨迹跟踪时,具有较好的稳定性与鲁棒性。该控制算法能合理应用到此类轨迹跟踪控制系统中。     

Adaptive Dynamic Surface control of An electrohydraulic Actuator with Friction Compensation

In this paper, an adaptive nonlinear control scheme with a friction observer for position control of an electrohydraulic actuator is proposed. The observer based on the LuGre friction model is employed to compensate for the friction. Adaptation laws are used to handle parameter uncertainties in the actuator and friction model. The control law including dynamics of the observer is developed through a backstepping‐like dynamic surface control (DSC) technique. Experimental results have illustrated the success of the control scheme. The results also show that the adaptive DSC controller has better tracking performance than an adaptive backstepping and conventional PI controllers.     

Fractional-order dynamics and adaptive dynamic surface control of flexible-joint robots

This paper establishes a novel fractional-order model for n-links flexible-joint (FJ) robots and proposes an adaptive dynamic surface control (DSC) scheme to address the tracking control problem. The fractional-order FJ model is built by fractional-order viscoelastic dynamics model to have a more concise form. An adaptive DSC strategy is proposed to address the tracking control problem based on backstepping method. By selecting the appropriate orders for fractional filters, the controller could solve the “explosion of complexity” problem. The unknown nonlinearities of FJ robot systems are approximated by Radial basis function (RBF) neural networks (NNs). Based on the Lyapunov stability theory, the bounds of all signals in the closed-loop system are achieved. The simulation results confirm the effectiveness of the presented control scheme.     

Adaptive Pseudo Inverse Control for a Class of Nonlinear Asymmetric and Saturated Nonlinear Hysteretic Systems

This paper aims at eliminating the asymmetric and saturated hysteresis nonlinearities by designing hysteresis pseudo inverse compensator and robust adaptive dynamic surface control(DSC)scheme.The"pseudo inverse"means that an on-line calculation mechanism of approximate control signal is developed by applying a searching method to the designed temporary control signal where the true control signal is included.The main contributions are summarized as:1)to our best knowledge,it is the first time to compensate the asymmetric and saturated hysteresis by using hysteresis pseudo inverse compensator because the construction of the true saturated-type hysteresis inverse model is very difficult;2)by designing the saturated-type hysteresis pseudo inverse compensator,the construction of true explicit hysteresis inverse and the identifications of its corresponding unknown parameters are not required when dealing with the saturated-type hysteresis;3)by combining DSC technique with the tracking error transformed function,the"explosion of complexity"problem in backstepping method is overcome and the prespecified tracking performance is achieved.Analysis of stability and experimental results on the hardware-inloop platform illustrate the effectiveness of the proposed adaptive pseudo inverse control scheme.     

一类非线性时滞系统的自适应模糊动态面控制

针对一类具有未知方向增益函数的严格反馈非线性时滞系统, 提出了一种自适应模糊动态面控制(Dynamic surface control, DSC)算法. 通过利用DSC设计技术和Lyapunov-Krasovskii函数, 该算法不仅克服了计算膨胀的问题, 而且补偿了未知的时滞. 采用Nussbaum函数解决了虚拟控制增益的符号问题, 并且避免了控制器的奇异性. 所设计的控制器保证了闭环系统所有的状态和信号是半全局有界的, 并且通过选择合适的设计参数可使跟踪误差为任意小. 仿真结果表明了所提出控制器的有效性.     

Nonlinear Gains Recursive Sliding Mode Dynamic Surface Control with Integral Action

In this paper, by introducing a function with nonlinear gains and developing sliding surfaces with integral action in the dynamic surface control (DSC) recursive procedure, a novel DSC strategy is proposed. The drawbacks of conventional DSC methods, such as being sensitive to the design constant of the first order low‐pass filter and being unable to achieve zero steady‐state error for step reference signal, are overcome. Moreover, improvement of transient performance and reduction of control effort can be obtained. The stability analysis shows that the proposed new approach can guarantee semi‐global uniform ultimate boundedness (SGUUB) of all closed‐loop signals and that the ultimate tracking error bound in regulation can be made arbitrarily small.     

A robust output-feedback adaptive dynamic surface control for linear systems with input disturbance

In this paper, a robust output-feedback adaptive control is proposed for linear time-invariant (LTI) singleinput single-output (SISO) plants with unmeasurable input disturbance. Using dynamic surface control (DSC) technique, it is shown that the explosion of complexity problem in backstepping control can be eliminated. Furthermore, the proposed adaptive DSC scheme has the following merits: 1) by introducing an initialization technique, the L∞ performance of system tracking error can be guaranteed even if the plant high-frequency gain is unknown and the input disturbance exists, and 2) the adaptive law is necessary only at the first design step, which significantly reduces the design procedure. It is proved that with the proposed scheme, all the closed-loop signals are semiglobally uniformly ultimately bounded. Simulation results are presented to demonstrate the effectiveness of the proposed scheme.     

Adaptive neural dynamic surface control for servo systems with unknown dead-zone

An adaptive neural controller is proposed for nonlinear systems with a nonlinear dead-zone and multiple time-delays. The often used inverse model compensation approach is avoided by representing the dead-zone as a time-varying system. The “explosion of complexity” in the backstepping synthesis is eliminated in terms of the dynamic surface control (DSC) technique. A novel high-order neural network (HONN) with only a scalar weight parameter is developed to account for unknown nonlinearities. The control singularity and some restrictive requirements on the system are circumvented. Simulations and experiments for a turntable servo system with permanent-magnet synchronous motor (PMSM) are provided to verify the reliability and effectiveness.     

含攻击角度约束的三维制导控制一体化鲁棒设计方法

针对具有攻击角度约束的STT飞行器对象,提出了一种三维制导控制一体化鲁棒设计方法.首先,基于某些可行性简化原则,推导出面向三维制导控制一体化设计的非线性数学模型.然后,针对一类多变量非线性系统,通过引入控制补偿项,提出了一种鲁棒动态逆设计方法.结合鲁棒动态逆和动态面控制方法,完成了制导控制一体化鲁棒算法的设计.仿真结果表明,所提出的三维制导控制一体化算法可保证飞行器的稳定飞行和精确制导,并且满足攻击角度的约束要求.此外,该方案具备针对参数不确定性和等效干扰的强鲁棒性能.     

An adaptive low-dimensional control to compensate for actuator redundancy and FES-induced muscle fatigue in a hybrid neuroprosthesis

To restore walking and standing function in persons with paraplegia, a hybrid walking neuroprosthesis that combines a powered exoskeleton and functional electrical stimulation (FES) can be more advantageous than sole FES or powered exoskeleton technologies. However, the hybrid actuation structure introduces certain control challenges: actuator redundancy, cascaded muscle activation dynamics, FES-induced muscle fatigue, and unmeasurable states. In this paper, a human motor control inspired control scheme is combined with a dynamic surface control method to overcome these challenges. The new controller has an adaptive muscle synergy-based feedforward component which requires a fewer number of control signals to actuate multiple effectors in a hybrid neuroprosthesis. In addition, the feedforward component has an inverse fatigue signal to counteract the effects of the muscle fatigue. A dynamic surface control (DSC) method is used to deal with the cascaded actuation dynamics without the need for acceleration signals. The DSC structure was modified with a delay compensation term to deal with the electromechanical delays due to FES. A model based estimator is used to estimate the unmeasurable fatigue and actuator activation signals. The development of the controller and a Lyapunov stability analysis, which yielded semi-global uniformly ultimately boundedness, are presented in the paper. Computer simulations were performed to test the new controller on a 2 degrees of freedom fixed hip model after which preliminary experiments were conducted on one able-bodied male subject in the fixed hip configuration.     

Adaptive Fuzzy Dynamic Surface Control of Flexible-Joint Robot Systems With Input Saturation

In this paper, we propose an adaptive fuzzy dynamic surface control (DSC) scheme for single-link flexible-joint robotic systems with input saturation. A smooth function is utilized with the mean-value theorem to deal with the difficulties associated with input saturation. An adaptive DSC design with an auxiliary first-order filter is used to solve the "explosion of complexity" problem. It is proved that all the signals in the closed-loop system are semi-globally uniformly ultimately bounded, and the tracking error eventually converges to a small neighborhood around zero. The main advantage of the proposed method is that only one adaptation parameter needs to be updated, which reduces the computational burden significantly. Simulation results demonstrate the feasibility of the proposed scheme and the comparison results show that the improved DSC method can reduce the computational burden by almost two thirds in comparison with the standard DSC method.