共查询到20条相似文献,搜索用时 312 毫秒
1.
针对铝电解厂房照明存在照明用电浪费的问题,从高效节能角度设计了一种节能照明系统,并将该系统在厂房中进行应用,取得了显著的节能环保和经济效益。 相似文献
2.
工业无线遥控系统在桥式起重机上的应用 总被引:1,自引:0,他引:1
在简单介绍了工业无线遥控系统的基础上,重点介绍了数字增强型无绳通讯技术标准(DECT),该技术使系统具有更高的灵活性、可靠性和稳定性,并介绍了产品的选型方法和电路的设计要点. 相似文献
3.
本文对某活性炭厂电气系统设计,重点介绍了供配电系统设计,主要用电设备及自动化控制系统的选择。该系统的设计符合国家节能减排政策,将为该厂带来应有的经济效益。 相似文献
4.
为了提高板坯库天车作业效率,结合钢铁厂板坯库生产的特点,我们开发了天车无线系统,实现了天车任务的自动编制、下达、分配和执行。本文阐述了天车无线系统的设计思想,包括无线系统架构、网络设置、系统功能等,以及无线系统的实施方案,包括无线网络设计和无线发射站的布置,最后提出了无线设备安装的注意事项。系统在某钢厂上线后,提高了天车作业效率,应用效果较好。 相似文献
5.
6.
本文根据马钢的实际情况,阐述了实现无线电场量及计算机场强分析系统的设计思想,对硬件结构及软件设计作了较详细的解释。本系统采用专用检测仪器与计算机技术相结合,提高测量,分析的效率,提高了目标频率的命中率。 相似文献
7.
韶钢用电最大需量(MD值)微机处理系统投入使用由韶钢集团公司与南京昌华自动化研究所共同开发研制的“韶钢用电最大需量(MD值)微机综合处理系统”最近投入使用。该系统可提供准确的实际用电最大需量,为节约用电和减少开支创造了有利的条件。(张浪)韶钢用电最大... 相似文献
8.
设计一种利用DTMF编码及DTMF解码芯片组成的遥测、遥控计分系统,着重阐述系统的工作原理及硬件设计原理,并在14通道的无线抢答器中实现.该设计能实现多种功能,非常适用于多种竞赛场合.实践证明,系统工作稳定可靠,具有广阔的应用前景. 相似文献
9.
10.
11.
根据鞍钢大型厂工字钢生产的特点,研究了工字钢孔型的设计方法、优化方法、自动制图和数据库的建立,按照软件工种的方法,采用结构化和面向对象的软件分析和设计技术,建立了工字钢计算机辅助孔型设计(CARD)系统。该系统采用参数化设计,具有良好的人机交互界面和文件管理功能。 相似文献
12.
根据钢管冷斜轧过程的变形特点,建立了辊型设计系统。把辊型设计的结果作为初始参数,由刚塑性有限元分析成型过程,将速度场、应变和应力反馈到辊型设计系统,调整辊型设计的初始参数,绘制出适应钢管冷斜轧工艺要求辊型图。 相似文献
13.
Eight explicitly identified assumptions about the nature of the health care delivery problem were used to design a statewide health education system based in a university medical center. The system design and how it is being implemented in one state (West Virginia) are discussed. Three unexpected outcomes regarding coordination of agency services, the political attractiveness of the system, and the system as a resource to new health education programs are briefly discussed. Two prerequisites for system development and the importance of the assumptions in a system's design are identified. (16 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved) 相似文献
14.
15.
阐述了现代热连轧控制系统设计原则及典型结构。介绍了鞍钢集团鞍凌热轧带钢厂1700mm热连轧自动化控制系统总体设计与选型情况,以及控制系统软、硬件自主集成开发的特点、功能及采用的新技术。 相似文献
16.
17.
A neural network-based design system is presented in this paper for preliminary design of concrete box girder bridges. The system is based on a loose coupling model that integrates the artificial neural network and the fuzzy network to perform the task of noisy data filtering, knowledge extraction, and candidate synthesis. After a comparative study, the radial basis function neural network is chosen in the design knowledge generation instead of the commonly used back-propagation neural network. The fuzzy network is employed to determine the integer types of design parameters. The developed system provides a few feasible design configurations, and enables the user to overwrite some of the design parameters, so that that user can have a wide choice in his preliminary design. The accuracy of the neural network testing and the influence of the size of the design cases on the neural network prediction are discussed. A design example is included to illustrate the design procedure. 相似文献
18.
为解决传统机电设备自动化故障诊断系统存在的精准度低、效果差的问题,提出了对自动化故障诊断系统进行优化设计方案,通过对机电设备自动化故障诊断系统的软硬件结构的优化设计,建立数据采集层、服务器层、命令交互层,并选用光时域反射仪NK2000故障光纤测试仪OTDR等作为系统硬件,通过信号转换为光信号形式,再经过光纤耦合器转换为电信号形式进行诊断。利用主动轮询采集方法采集故障数据,然后设立模块处理大量信息,最后利用模糊推理的方法定位故障位置,完成故障诊断系统的设计。 相似文献
19.
Glass fiber reinforced gypsum (GFRG) walls and their associated building system are the new building product and building system that have been developed in the Australian building industry in the last decade. GFRG walls are factory made glass-fiber reinforced gypsum hollow walling panels with/without in situ reinforced concrete filling inside the cavities. GFRG can be used as various structural elements, such as walls and slabs. GFRG, in its short life, without extensive product development and comprehensive structural design guidelines, has been used as the principal wall construction material in more than 3,000 dwellings across Australia. As GFRG walls find more and more applications and interests in the building industry in Australia as well as in other countries, comprehensive structural design guidelines for GFRG walls and their building system have become necessary. Comprehensive experimental testing and theoretical studies started in 2002 as an international research and development program to develop structural design guidelines for GFRG walls. The axial and shear tests are reported in this paper. 相似文献
20.
Robert M. McDavid Jonathan A. Dantzig 《Metallurgical and Materials Transactions B》1998,29(3):679-690
In this work, a methodology for the optimal design of flow in foundry casting rigging systems is discussed. The methodology
is based on a novel, fully analytical design sensitivity formulation for transient, turbulent, free-surface flows. The filling
stage of the casting process is modeled by solving the time-averaged form of the Navier-Stokes equations via a turbulent mixing-length model, in conjunction with the volume-of-fluid (VOF) method for modeling the free surface. The
design of the runner and gating system of a simple block casting is presented as an example application for using sensitivity
information in design. The analytical sensitivity routine is coupled to a numerical optimizer to yield an automated method
for optimal design of the casting rigging system. The finite element model of the filling process is verified through physical
experimentation. Solutions of glycerol and water are used to perform laminar and turbulent flow filling experiments, which
are used to verify independently the VOF algorithm and the adequacy of the mixing-length model. The results show that the
numerical model accurately reproduces the main features of the flow, and filling times agree with acceptable accuracy. Finally,
the analytical techniques are used to obtain an optimal runner shape, which eliminates air entrainment, and the design is
verified experimentally. 相似文献