共查询到20条相似文献,搜索用时 93 毫秒
1.
介绍了一种PC-Based数控插齿系统的结构与硬件构成,给出自定义齿扇形控编程步骤,提出了一种定义齿扇的切削进给速度计算方法和新的自定义轨迹的实时插补法,设计了一种高效可靠的加工控制流程,加工实践表明系统稳定可靠,精度可确定在6.5级(GB100095-88)。 相似文献
2.
3.
4.
论述了如何把握雷达主控台,机柜造型设计的诸多要素,如何掌握主控台造型设计的方法,和雷达主控台,机柜造型设计的特殊性,以及在进行雷达主控台,机柜的造型设计时运用的一些技巧和手段,突出论述了在进行设计时要多方面综合考虑的因素,提出了科学的设计思路及运用科学设计的方法,使雷达主控台,机柜的造型设计为企业带来更多的效益。 相似文献
5.
6.
7.
8.
手机塑料外壳是以射出成型来生产制造,而射出成型模具的加工及其相关技术更是关键。文中针对手机外壳的结构工艺特点,探讨塑料模具制作及设计分析的过程,分析注射模结构的设计过程,采用热流道系统、提高了塑件表面质量及成型效率,利用射出成型机实际操作,以流量、压力、温度为参数做变化,实际射出成品,进行分析。 相似文献
9.
对渐开线齿廓范成仪功能要求进行了分析,指出现有齿廓范成仪结构和使用上的缺陷,并对其结构作了改进,改进后的齿廓范成仪与归齿廓范成仪进行了比较,效果很好。同时也为制造新的齿廓范成仪提供了参考。 相似文献
10.
文中建立了牛头刨床的力学模型,基于分析力学原理推导了牛头刨床的运动微分方程。利用MATLAB软件开发了牛头刨床的通用运动学分析软件,并对牛头刨床的运动学规律进行了数值仿真,为该种机床的优化设计提供了理论支撑。 相似文献
11.
Improving repeatability of coordinate measuring machines with shaped command signals 总被引:6,自引:0,他引:6
Performance of coordinate measuring machines (CMMs) is adversely effected by structural vibrations. The effect of input shaping, a method of reducing residual vibration, on the quality of CMM measurements has been investigated. Measurements of a CMM show a reduction of structural deflection when input shaping is used. Additional tests indicate that input shaping improves measurement repeatability over a large range of operating parameters. 相似文献
12.
从面齿轮插齿加工原理出发,提出面齿轮内外半径的确定方法。基于Auto CAD在计算机上模拟正交面齿轮插齿加工过程,对面齿轮加工过程进行仿真,可直观地观察面齿轮加工过程以及齿顶变尖和齿根根切的现象,并通过实例验证了面齿轮内外半径确定方法的正确性。 相似文献
13.
Youyu Liu 《Journal of Mechanical Science and Technology》2014,28(7):2749-2757
Gear shaping is an efficient cutting method available for internal helical non-circular gears, but gear hobbing is not. Four methods and models of generating motion were built. Virtual shaping revealed that the method of equal arc-length of gear billet has the highest machining precision. Three methods of primary motion were built and analyzed respectively by using a kinetic simulation, which revealed that the method of keeping a constant velocity has the best dynamic performance. Two methods of additional motion were offered. Virtual shaping revealed that the two methods have the same precision, whether the gear has a right-hand helix or left-hand helix. Finally, two optimal shaping models were provided, and performed shaping experiments, respectively. The experiments showed that the shaping strategies and models are correct and feasible. Tooth-flank detections revealed that every tooth of the gears has the same precision using the optimal shaping models. 相似文献
14.
15.
16.
17.
18.
光束整形技术是流式细胞仪中的关键技术之一,针对这一难点,提出了一种以弥散圆半径作为优化函数的基于ZEMAX的流式细胞仪光束整形系统研究方法,分析并计算了光束整形系统的相关参数,推导了非球面整形技术成像理论,并针对双柱透镜光束整形系统进行了仿真和优化设计,设计了实物模型,搭建了实验系统,对此设计的可行性进行了验证。结果表明,本方法可在保证激光光斑成形的前提下,简单、快速、全面直观地实现光束整形系统的优化设计,减小了细胞偏移中心线带来的误差,从而提高了光强的利用率和分辨率。 相似文献
19.