Lignin-<Emphasis Type="Italic">graft</Emphasis>-poly(acrylic acid) for enhancement of heavy metal ion biosorption

Novel biosorbent, alkaline Lignin-graft-poly(acrylic acid) (AL-g-PAA), was synthesized by radical graft copolymerization. The molecular structure was confirmed by ¹H-NMR and thermogravimetric analysis. Taking the Cu(II) ion biosorption as standard, the optimal conditions of the grafting reaction (0.50 g monomer amount/g AL; 0.20 g initiator/g AL; 0.05 g crosslinker/g AL; reaction at 80 °C for 10 min) were selected from the orthogonal tests. Biosorption studies for eliminating Cu(II) and Cd(II) were conducted at different pHs and temperatures to detect kinetic and equilibrium parameters. The biosorption of these two metal ions followed pseudo-second-order rate kinetics and increased with increasing temperature. The biosorption isotherm processes were fitted better to Langmuir model. The maximal biosorption capacities of AL-g-PAA at 25 °C were 0.75 mmol/g (Cu(II)) and 0.68 mmol/g (Cd(II)). Using the biomass waste, lignin, to prepare biosorbent will exert positive effects on environmental and economic sustainability.     

Untreated coffee husks as biosorbents for the removal of heavy metals from aqueous solutions

The objective of this work was to propose an alternative use for coffee husks (CH), a coffee processing residue, as untreated sorbents for the removal of heavy metal ions from aqueous solutions. Biosorption studies were conducted in a batch system as a function of contact time, initial metal ion concentration, biosorbent concentration and pH of the solution. A contact time of 72 h assured attainment of equilibrium for Cu(II), Cd(II) and Zn(II). The sorption efficiency after equilibrium was higher for Cu(II) (89-98% adsorption), followed by Cd(II) (65-85%) and Zn(II) (48-79%). Even though equilibrium was not attained in the case of Cr(VI) ions, sorption efficiency ranged from 79 to 86%. Sorption performance improved as metal ions concentrations were lowered. The experimental sorption equilibrium data were fitted by both Langmuir and Freundlich sorption models, with Langmuir providing the best fit (R2>0.95). The biosorption kinetics was determined by fitting first and second-order kinetic models to the experimental data, being better described by the pseudo-second-order model (R2>0.99). The amount of metal ions sorbed increased with the biosorbent concentration in the case of Cu(II) and Cr(VI) and did not present significant variations for the other metal ions. The effect of the initial pH in the biosorption efficiency was verified in the pH range of 4-7, and the results showed that the highest adsorption capacity occurred at distinct pH values for each metal ion. A comparison of the maximum sorption capacity of several untreated biomaterial-based residues showed that coffee husks are suitable candidates for use as biosorbents in the removal of heavy metals from aqueous solutions.     

Biosorption of copper (II) onto immobilized cells of Pycnoporus sanguineus from aqueous solution: equilibrium and kinetic studies

The ability of white-rot fungus, Pycnoporus sanguineus to adsorb copper (II) ions from aqueous solution is investigated in a batch system. The live fungus cells were immobilized into Ca-alginate gel to study the influence of pH, initial metal ions concentration, biomass loading and temperature on the biosorption capacity. The optimum uptake of Cu (II) ions was observed at pH 5 with a value of 2.76mg/g. Biosorption equilibrium data were best described by Langmuir isotherm model followed by Redlich-Peterson and Freundlich models, respectively. The biosorption kinetics followed the pseudo-second order and intraparticle diffusion equations. The thermodynamic parameters enthalpy change (10.16kJ/mol) and entropy change (33.78J/molK) were determined from the biosorption equilibrium data. The FTIR analysis showed that OH, NH, CH, CO, COOH and CN groups were involved in the biosorption of Cu (II) ions onto immobilized cells of P. sanguineus. The immobilized cells of P. sanguineus were capable of removing Cu (II) ions from aqueous solution.     

Removal and recovery of heavy metals from aqueous solution using Ulmus carpinifolia and Fraxinus excelsior tree leaves

Ulmus carpinifolia and Fraxinus excelsior tree leaves, which are in great supply in Iran, were evaluated for removal of Pb(II), Cd(II) and Cu(II) from aqueous solution. Maximum biosorption capacities for U. carpinifolia and F. excelsior were measured as 201.1, 172.0 mg/g for Pb(II), 80.0, 67.2 mg/g for Cd(II) and 69.5, 33.1 mg/g for Cu(II), respectively. For both sorbents the most effective pH range was found to be 2-5 for Pb(II), 3-5 for Cd(II) and 4-5 for Cu(II). Metal ion biosorption increased as the ratio of metal solution to the biomass quantity decreased. Conversely, biosorption/g biosorbent decreased as the quantity of biomass increased. The biosorption of metal ions increased as the initial metal concentration increased. Biosorption capacities of metal ions were in the following order: Pb(II)>Cd(II)>Cu(II). The equilibrium data for Pb(II) and Cu(II) best fit the Langmuir adsorption isotherm model. Kinetic studies showed that the biosorption rates could be described by a second-order expression. Both the sorbents could be regenerated using 0.2 M HCl during repeated biosorption-desorption cycles with no loss in the efficiency of the Cu(II) removal observed. Biosorption of Pb(II), Cd(II) and Cu(II) was investigated in the presence of Na, K, Mg and Ca ions. The results from these studies show a novel way of using U. carpinifolia and F. excelsior tree leaves to remove Pb(II), Cd(II) and Cu(II) from metal-polluted waters.     

Selective removal of Cr(VI) ions from aqueous solutions including Cr(VI), Cu(II) and Cd(II) ions by 4-vinly pyridine/2-hydroxyethylmethacrylate monomer mixture grafted poly(ethylene terephthalate) fiber

In this study, a new reactively fibrous adsorbent was prepared by grafting 4-vinly pyridine (4-VP) and 2-hydroxyethylmethacrylate (HEMA) monomer mixture onto poly(ethylene terephthalate) (PET) fibers for removal of Cr(VI), Cu(II) and Cd(II) metal ions from aqueous solution by using batch adsorption method. The influence of various parameters such as graft yield (GY), pH, adsorption time, initial ion concentration and adsorption temperature was investigated. The selectivity of the reactive fiber was also examined. The results show that the adsorbed amount of metal ions followed as given in the order Cr(VI) > Cd(II) > Cu(II). At pH 3, Cr(VI) was removed by 99% while the initial concentration of ions was at 5 mg L⁻¹ and by 94% at 400 mg L⁻¹. It was found that the grafted fiber is more selective for Cr(VI) ions in the mixed solution of Cr(VI)–Cu(II), Cr(VI)–Cd(II) and Cr(VI)–Cu(II)–Cd(II) at pH 3 and it was observed that the grafted fibers are stable and regenerable by acid and base without losing their activity.     

Comparative study of the biosorption of Pb(II), Ni(II) and Cr(VI) ions onto S. cerevisiae: determination of biosorption heats

In this study, the biosorption of Pb(II), Ni(II) and Cr(VI) ions onto inactive Saccharomyces cerevisiae was investigated as a function of initial pH, initial metal ion concentration and temperature. The Langmuir model was applied to experimental equilibrium data of Pb(II), Ni(II) and Cr(VI) biosorption depending on temperature and the maximum metal ions uptake at optimum biosorption temperature of 25 °C, were found to be 270.3, 46.3 and 32.6 mg g⁻¹, respectively. Using the Langmuir constant, b values obtained at different temperatures, the biosorption heats of Pb(II), Ni(II) and Cr(VI) were determined as −1.125, −1.912 and −2.89 kcal mol⁻¹, respectively. The results indicated that the biosorption of Pb(II), Ni(II) and Cr(VI) ions to S. cerevisiae is by the physical adsorption and has an exothermic nature.     

Biosorption of copper(II) by nonliving lichen biomass of Cladonia rangiformis hoffm

Biosorption of heavy metals can be an effective process for the removal of heavy metal ions from aqueous solutions. In this study, the adsorption properties of lichen biomass of Cladonia rangiformis hoffm. for copper(II) were investigated by using batch adsorption techniques. The effects of initial metal ion concentration, initial pH, biosorbent concentration, stirring speed and contact time on biosorption efficiency were studied. In the experiments the optimum pH value was found out 5.0 which was the native pH value of solution. The experimental adsorption data were fitted to the Langmuir adsorption model. The highest metal uptake was calculated from Langmuir isotherm and found to be 7.6923 mg Cu(II)/g inactivated lichen at 15 degrees C. The results indicated that the biomass of C. rangiformis is a suitable biosorbent for removing Cu(II) from aqueous solutions.     

Removal of Cr(VI) and Ni(II) from aqueous solution by fused yeast: study of cations release and biosorption mechanism

Biosorption of Cr(VI) and Ni(II) by a fused yeast from Candida tropicalis and Candida lipolytica under varying range of pH, initial metal concentration and reaction time was investigated. Net cation release and Cr removal reached 2.000mmol/l and 81.37% when treating 20mg/l Cr(VI) at pH 2 with 25mg/l biomass for 30min, while for Ni were 0.351mmol/l and 64.60%, respectively. Trace metal elements such as Co, Cu, Mn, Mo, Se and Zn played active role in biosorption as important ingredients of functional enzymes. Cr(VI) was reduced to less toxic Cr(III) and chelated with extracellular secretions, and further accumulated inside the cells. For Ni biosorption, however, largely a passive uptake process influenced by ion gradient led to lower adsorption capacity and cations release. Fourier transform infrared (FTIR) spectrum analysis indicated that amide and pyridine on cells were involved in binding with Cr, but for Ni, bound-OH and nitro-compounds were the main related functional groups. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) analysis confirmed that considerable amounts of metals precipitated on cell surface when dealing with high concentration metals.     

Kinetic and thermodynamic studies of the biosorption of Cr(VI) by Pinus sylvestris Linn

Biosorption equilibrium, kinetics and thermodynamics of chromium(VI) ions onto cone biomass were studied in a batch system with respect to temperature and initial metal ion concentration. The biosorption efficiency of chromium ions to the cone biomass decreased as the initial concentration of metal ions was increased. But cone biomass of Pinus sylvestris Linn. exhibited the highest Cr(VI) uptake capacity at 45 degrees C. The biosorption efficiency increased from 67% to 84% with an increase in temperature from 25 to 45 degrees C at an initial Cr(VI) concentration of 300 mg/L. The Langmuir isotherm model was applied to experimental equilibrium data of Cr(VI) biosorption depending on temperature. According to Langmuir isotherm, the monolayer saturation capacity (Q(max)) is 238.10 mg/g. The pseudo-first-order and pseudo-second-order kinetic models were applied to test the experimental data for initial Cr(VI). The pseudo-second-order kinetic model provided the best correlation of the used experimental data compared to the pseudo-first-order kinetic model. The activation energy of biosorption (E(a)) was determined as 41.74 kJ/mol using the Arrhenius equation. Using the thermodynamic equilibrium coefficients obtained at different temperatures, the thermodynamic constants of biosorption (DeltaG(0), DeltaH(0) and DeltaS(0)) were also evaluated.     

Removal of Cr(VI) using co-immobilized activated carbon and <Emphasis Type="Italic">Bacillus subtilis</Emphasis>: fixed-bed column study

Fixed-bed column studies were conducted to evaluate the potential of co-immobilized (activated carbon and Bacillus subtilis) (CI) beads for the removal of Cr(VI) from aqueous solution. The impact of various parameters such as initial Cr(VI) concentrations (100, 150, and 200 mg/L), flow rate (3, 9, and 15 mL/min), and bed depth (10, 15, and 20 cm) on Cr(VI) adsorption onto CI beads were investigated. The breakthrough time increased with a decrease in initial Cr(VI) concentration and flow rate, and an increase in bed height. The breakthrough data obtained for Cr(VI) removal was more adequately described by the Thomas model with high correlation coefficients (R ² = 0.982). The eluent, 0.1 M NaOH, provided high elution efficiencies (~90 %) in all the six cycles. Obtained results pointed out that CI beads could potentially be used for the removal of Cr(VI) from aqueous solution.     

Biosorption of heavy metal ions from aqueous solution by red macroalgae

Biosorption is an effective process for the removal and recovery of heavy metal ions from aqueous solutions. The biomass of marine algae has been reported to have high biosorption capacities for a number of heavy metal ions. In this study, four species of red seaweeds Corallina mediterranea, Galaxaura oblongata, Jania rubens and Pterocladia capillacea were examined to remove Co(II), Cd(II), Cr(III) and Pb(II) ions from aqueous solution. The experimental parameters that affect the biosorption process such as pH, contact time and biomass dosage were studied. The maximum biosorption capacity of metal ions was 105.2mg/g at biomass dosage 10 g/L, pH 5 and contact time 60 min. The biosorption efficiency of algal biomass for the removal of heavy metal ions from industrial wastewater was evaluated for two successive cycles. Galaxaura oblongata biomass was relatively more efficient to remove metal ions with mean biosorption efficiency of 84%. This study demonstrated that these seaweeds constitute a promising, efficient, cheap and biodegradable sorbent biomaterial for lowering the heavy metal pollution in the environment.     

Biosorption of cadmium (II) and lead (II) from aqueous solutions using mushrooms: A comparative study

Sorption capacity of oyster mushroom (Pleurotus platypus), button mushroom (Agaricus bisporus) and milky mushroom (Calocybe indica) were evaluated on biosorption of heavy metals, viz. cadmium (II) and lead (II) from aqueous solutions. The optimum sorption conditions were studied for each metal separately. The desired pH of the aqueous solution was found to be 6.0 for the removal of cadmium (II) and 5.0 for removal of lead (II) for all the mushrooms. The percent removal of both the metals was found to increase with the increase in biosorbent dosage and contact time. The fitness of the biosorption data for Langmuir and Freundlich adsorption models was investigated. It was found that biosorption of cadmium (II) and lead (II) ions onto the biomass of the three mushrooms were better suitable to Langmuir than Freundlich adsorption model. P. platypus showed the highest metal uptake potential for cadmium (q_max 34.96 mg/g) whereas A. bisporus exhibited maximum potential for lead (q_max 33.78 mg/g). Milky mushroom showed the lowest metal uptake capacity for both the metals. The present data confirms that mushrooms may be used as efficient biosorbent for the removal of cadmium (II) and lead (II) ions from aqueous solution.     

Adsorption, desorption, and kinetic study on Cr(III) removal from aqueous solution using Bacillus subtilis biomass

Discharge of untreated industrial effluents containing heavy metals is hazardous to the environment as they are highly toxic and accumulates throughout the food chain. This study reports the removal of trivalent chromium from aqueous solution using Bacillus subtilis biomass, best suited for the treatment of real tannery effluents since Cr(III) salt is used for tanning. The optimum pH and temperature for biosorption was found to be 4.0 and 60°C, respectively. A biosorbent dosage of 1 g l^?1 showed maximum metal uptake (q _e ) of 23.9 mg g^?1 for an initial metal concentration of 100 ppm. Pseudo-second-order kinetics best describes the adsorption process. Best fit for adsorption was obtained with Freundlich model. Desorption experiments with 5 M NaOH, inferred the reusability of the biomass. Fourier transform-infrared spectroscopy was used to study the mechanism of metal binding.     

Adsorption of copper (II), chromium (III), nickel (II) and lead (II) ions from aqueous solutions by meranti sawdust

The present study proposed the use of meranti sawdust in the removal of Cu(II), Cr(III), Ni(II) and Pb(II) ions from synthetic aqueous solutions. Batch adsorption studies showed that meranti sawdust was able to adsorb Cu(II), Cr(III), Ni(II) and Pb(II) ions from aqueous solutions in the concentration range 1–200 mg/L. The adsorption was favoured with maximum adsorption at pH 6, whereas the adsorption starts at pH 1 for all metal ions. The effects of contact time, initial concentration of metal ions, adsorbent dosage and temperature have been reported. The applicability of Langmuir, Freundlich, and Dubinin–Radushkevich (D–R) isotherm was tried for the system to completely understand the adsorption isotherm processes. The adsorption kinetics tested with pseudo-first-order and pseudo-second-order models yielded high R² values from 0.850 to 0.932 and from 0.991 to 0.999, respectively. The meranti sawdust was found to be cost effective and has good efficiency to remove these toxic metal ions from aqueous solution.     

Copper(II) and zinc(II) biosorption on Pinus sylvestris L

The biosorption properties of copper(II) and zinc(II) onto a cone biomass of Pinus sylvestris L. was investigated by using batch techniques. The biosorption studies carried out with single metal solutions. The removal of copper(II) and zinc(II) from aqueous solution increased with pH and sharply decreased when pH of the solution was decreased. The maximum biosorption efficiency of P. sylvestris was 67% and 30% for Cu(II) and Zn(II), respectively. Batch kinetic and isotherm of biosorption metal ions were investigated. The second-order kinetic model was used to correlate the experimental data. The Freundlich and Langmuir model can describe the adsorption equilibrium of metal(II) on cone biomass. The biosorption constants were found from the Freundlich and Langmuir isotherms at 25 degrees C. It is found that the biosorption data of metals on cone biomass fitted both the Freundlich and Langmuir adsorption models.     

Removal and recovery of lead(II) from single and multimetal (Cd, Cu, Ni, Zn) solutions by crop milling waste (black gram husk)

The study reports removal of heavy metals when present singly or in binary and ternary systems by the milling agrowaste of Cicer arientinum (chickpea var. black gram) as the biosorbent. The biosorbent removed heavy metal ions efficiently from aqueous solutions with the selectivity order of Pb>Cd>Zn>Cu>Ni. The biosorption of metal ions by black gram husk (BGH) increased as the initial metal concentration increased. Biosorption equilibrium was established within 30 min, which was well described by the Langmuir and Freundlich adsorption isotherms. The maximum amount of heavy metals (qmax) adsorbed at equilibrium was 49.97, 39.99, 33.81, 25.73 and 19.56 mg/g BGH biomass for Pb, Cd, Zn, Cu and Ni, respectively. The biosorption capacities were found to be pH dependent and the maximum adsorption occurred at the solution pH 5. Efficiency of the biosorbent to remove Pb from binary and ternary solutions with Cd, Cu, Ni and Zn was the same level as it was when present singly. The presence of Pb in the binary and ternary solutions also did not significantly affect the sorption of other metals. Breakthrough curves for continuous removal of Pb from single, binary and ternary metal solutions are reported for inlet-effluent equilibrium. Complete desorption of Pb and other metals in single and multimetal solutions was achieved with 0.1 M HCl in both shake flask and fixed bed column studies. This is the first report of removal of the highly toxic Pb, Cd, and other heavy metals in binary and ternary systems based on the biosorption by an agrowaste. The potential of application for the treatment of solutions containing these heavy metals in multimetal solutions is indicated.     

Functionalization of nanocrystalline cellulose for decontamination of Cr(III) and Cr(VI) from aqueous system: computational modeling approach

The present study reports the preparation of nanocrystalline cellulose (NCC) with further reinforcement using succination and amination to observe the unexploited sorption efficiency of chromium from water bodies. The increased surface area-to-volume ratio of nanoparticles, quantum size effects, and the ability to tune surface properties through molecular modification make NCC ideal for metal remediation. Novel NCC was also characterized on the basis of XRD and AFM techniques and found to have enough potential for functionalization. Fourier transform infrared spectrometry of functionalized biomass highlights NCC interactions with succination and amination reactions, responsible for sorption phenomenon of chromium. Sorption studies (batch experiments) result into the standardization of optimum conditions for removal of Cr(III) and Cr(VI) as follows: biomass dosage (2.0 g), metal concentration (25 mg/l), contact time (40 min), and volume of the test solution (200 ml) at pH 6.5 and 2.5, respectively. The adsorption data were found to fit both the Freundlich and Langmuir isotherms. The sorption capacity of the regenerated biomass remained almost constant after five cycles of sorption process, suggesting that the lifetime was sufficient for continuous application and was further confirmed by means of TGA analysis. Artificial neural networks model was developed to predict the removal efficiency of Cr(III) and Cr(VI) ions from aqueous solution using functionalized NCC. Back-propagation and Levenberg–Marquardt techniques are used to train various neural network architectures and the accuracy of the obtained models using test data set. The optimal neural network architectures of this process contain 15 and 16 neurons for Cr(III) and Cr(VI) respectively, with minimum mean-squared error for training and cross validation as for Cr(III) 1. 6.46422 × 10^?6 and 0.001137496 and for Cr(VI) 1. 30386 × 10^?6 and 0.002227835, respectively.     

Removal of Ni(II), Zn(II) and Cr(VI) from aqueous solution by Alternanthera philoxeroides biomass

Alternanthera philoxeroides biomass, a type of freshwater macrophyte, was used for the sorptive removal of Ni(II), Zn(II) and Cr(VI) from aqueous solutions. Variables of the batch experiments include solution pH, contact time, particle size and temperature. The biosorption capacities are significantly affected by solution pH. Higher pH favors higher Ni(II), Zn(II) removal, whereas higher uptake of Cr(VI) is observed as the pH is decreased. A two-stage kinetic behavior is observed in the biosorption of Ni(II), Zn(II) and Cr(VI): very rapid initial biosorption in a few minutes, followed by a long period of a slower uptake. It is noted that an increase in temperature results in a higher Ni(II), Zn(II) and Cr(VI) loading per unit weight of the sorbent. Decreasing the particle sizes of the Alternanthera philoxeroides biomass leads to an increase in the Ni(II), Zn(II) and Cr(VI) uptake per unit weight of the sorbent. All isothermal data are fairly well fitted with Langmuir equations. The thermodynamic parameter, DeltaG degrees, were calculated. The negative DeltaG degrees values of Cr(VI), Ni(II) and Zn(II) at various temperatures confirm the adsorption processes are spontaneous.     

Kinetic and equilibrium studies of biosorption of Pb(II) and Cd(II) from aqueous solution by macrofungus (Amanita rubescens) biomass

The biosorption characteristics of Pb(II) and Cd(II) ions from aqueous solution using the macrofungus (Amanita rubescens) biomass were investigated as a function of pH, biomass dosage, contact time, and temperature. Langmuir, Freundlich and Dubinin-Radushkevich (D-R) models were applied to describe the biosorption isotherm of the metal ions by A. rubescens biomass. Langmuir model fitted the equilibrium data better than the Freundlich isotherm. The maximum biosorption capacity of A. rubescens for Pb(II) and Cd(II) was found to be 38.4 and 27.3mg/g, respectively, at optimum conditions of pH 5.0, contact time of 30min, biomass dosage of 4 g/L, and temperature of 20 degrees C. The metal ions were desorbed from A. rubescens using both 1M HCl and 1M HNO(3). The recovery for both metal ions was found to be higher than 90%. The high stability of A. rubescens permitted ten times of adsorption-elution process along the studies without a decrease about 10% in recovery of both metal ions. The mean free energy values evaluated from the D-R model indicated that the biosorption of Pb(II) and Cd(II) onto A. rubescens biomass was taken place by chemical ion-exchange. The calculated thermodynamic parameters, DeltaG degrees , DeltaH degrees and DeltaS degrees showed that the biosorption of Pb(II) and Cd(II) ions onto A. rubescens biomass was feasible, spontaneous and exothermic under examined conditions. Experimental data were also tested in terms of biosorption kinetics using pseudo-first-order and pseudo-second-order kinetic models. The results showed that the biosorption processes of both Pb(II) and Cd(II) followed well pseudo-second-order kinetics. Based on all results, It can be also concluded that it can be evaluated as an alternative biosorbent to treatment wastewater containing Pb(II) and Cd(II) ions, since A. rubescens is low-cost biomass and has a considerable high biosorption capacity.