Carrier Facilitated Transport of Europium(III) Across Supported Liquid Membranes Containing N,N,N′,N′-tetra-2-ethylhexyl-3-oxapentane-diamide (T2EHDGA) as the Extractant

Studies on the solvent extraction and pertraction behavior of europium(III) was carried out from acidic feed solutions using N,N,N′,N′-tetra-2-ethylhexyl-3-oxapentane-diamide (T2EHDGA) in n-dodecane as the solvent. The nature of the extracted species from the solvent extraction studies conformed to Eu(NO₃)₃ · 3T2EHDGA which is in variance with the analogous Eu(III) – TODGA (linear homolog of T2EHDGA) extraction system. The transport behavior of Eu(III) was investigated from a feed containing 3.0 M HNO₃ into a receiver phase containing 0.01 M HNO₃ across a PTFE flat sheet supported liquid membrane (SLM) containing 0.2 M T2EHDGA in n-dodecane as the carrier solvent and 30% iso-decanol as the phase modifier. Effects of feed acidity, carrier extractant concentration, membrane pore size, and Eu concentration in the feed on the transport rates of Eu(III) were also investigated. Membrane diffusion coefficient (D _o) for the pertracted species was calculated using the Wilke-Chang equation as 4.25 × 10^?6 cm² · s^?1. The influence of Eu concentration on the flux was also investigated. The role of temperature on the transport rates was investigated and the thermodynamic parameters were calculated.     

Comparative Evaluation of CMPO and Diglycolamide Based Solvent Systems for Actinide Partitioning in Mixer-Settler Runs Using Tracer-Spiked PHWR Simulated High Level Waste

The TRUEX solvent (0.2 M CMPO + 1.2 M TBP) was employed for countercurrent extraction studies with radiotracers spiked pressurized heavy water reactor simulated high level waste (PHWR-SHLW) employing a 12-stage of mixer-settler. The results of the mixer-settler runs with CMPO were compared with those obtained under identical conditions employing TODGA (N,N,N’,N’-tetraoctyl diglycolamide) and T2EHDGA (N,N,N’,N’-tetra-2-ethylhexyl diglycolamide) as the extractants. Even though the TRUEX solvent revealed quantitative extraction of trivalent actinides and lanthanides in 5 stages at O/A = 1, stripping of the extracted metal ions from the loaded organic phase was poor with dilute HNO₃ solution (0.2 M HNO₃). Quantitative stripping could not be achieved in 12 stages even when a complexing solution (0.1 M citric acid + 0.1 M HNO₃) was employed as the strippant. In contrast, the stripping from loaded TODGA and T2EHDGA solvents was possible in < 6 stages with 0.2 M HNO₃. The experimental results suggested that the performance of TRUEX solvent was inferior to the diglycolamide based extractants such as TODGA and T2EHDGA.     

Extraction Behavior of Ln(III) Ions by T2EHDGA/n-Dodecane from Nitric Acid and Sodium Nitrate Solutions

The diglycolamide extractant T2EHDGA has proven to be promising for the separation of lanthanides and minor actinides in high-level nuclear waste reprocessing. This neutral extractant has shown significant extraction capacity for HNO₃ into the nonpolar organic phase, along with hyper-stoichiometric nitrate dependence on extraction of trivalent f-elements. The transport behavior of T2EHDGA/n-dodecane toward trivalent lanthanides is not well understood. This work found a significant increase in distribution ratios for Eu(III) extracted from aqueous HNO₃ media compared with that from NaNO₃. The extraction of Eu(III) from HNO₃ results in a different thermodynamic product than predicted by classic solvent extraction of 3:1 ligand–metal complex as observed with NaNO₃ in FTIR and UV-vis spectroscopy. Experimental distribution measurements in conjunction with mass-action modeling using the solvent extraction modeling program SXLSQI suggest participation of 1 to 2 HNO₃ molecules in the Eu(III)/T2EHDGA complex upon extraction from HNO₃ media, indicative of a mechanism change responsible for the enhanced extraction behavior toward lanthanides in the presence of HNO₃.     

Comparison in the extraction behavior of uranium(VI) from nitric acid medium using CHON based extractants,monoamide, malonamide,and diglycolamide,dissolved in piperidinium ionic liquid

Liquid-liquid extraction of U(VI) from nitric acid medium was carried out using three different class of CHON based molecular extractants namely monoamide, malonamide, and diglycolamide present in 1-butyl-1-methylpiperidinium bis(trifluoromethanesulfonyl)imide ([C₄mpip][NTf₂]) ionic liquid. The extractants investigated were di-n-hexyloctanamide (DHOA), N,N-dimethyl-N,N-di-octyl-2-(2-hexyloxylethyl)malonamide (DMDOHEMA) and N,N,N’,N’-tetra(ethylhexyl)diglycolamides (T2EHDGA). The extraction behavior of uranium(VI) in ionic liquid medium was investigated as a function of various parameters, such as the duration and temperature of equilibration, aqueous phase concentrations of feed acid, extractant, NaNO₃, and ionic liquid cation, etc. The extraction of U(VI) observed in these systems were compared with each other and the distribution ratios of U(VI) decreased in the order T2EHDGA > DMDOHEMA > DHOA. The slope analysis of the extraction data was carried out to understand the mechanistic aspects of extraction. The extraction of U(VI) observed in [C₄mpip][NTf₂] ionic liquid was also compared with pyrrolidinium ([C₄mpyr][NTf₂]) and imidazolium ([C₄mim][NTf₂]) based ionic liquids under identical experimental condition.     

Extraction of Trivalent Europium and Americium from Nitric Acid Solution with Bisdiglycolamides

Two bisdiglycolamides (BisDGAs) of N,N,N′′′,N′′′-tetrabutyl-N?,N′′-ethidene bisdiglycolamide (TBE-BisDGA) and N,N,N′′′,N′′′-tetrabutyl-N?,N′′-m-xylylene bisdiglycolamide (TBX-BisDGA) were synthesized. Their extraction behaviors of Eu(III) and Am(III), as well as nitric acid were investigated from nitric acid medium by using n-octanol as diluent. Nitric acid is extracted as the form of HNO₃·(BisDGAs)_0.6 by BisDGAs and the conditional acid uptake constants of TBE-BisDGA and TBX-BisDGA were 0.26 and 0.10, respectively. The distribution ratios of Eu(III) and Am(III) increased with the increase of nitric acid and extractant concentration, whilst decreased with temperature rise. TBX-BisDGA had a stronger extraction power for Eu(III) and Am(III) than TBE-BisDGA. Both of the extractants displayed a higher affinity toward Eu(III) than Am(III). In the examination of the acidity range from 0.5 to 5.0 M, a maximum separation factor SF_{Eu(III)/Am(III)} can reach 8.0 at 3.0 M HNO₃ for TBX-BisDGA; and 10 at 4.0 M HNO₃ for TBE-BisDGA, respectively. Slope analyses showed that Eu(III) and Am(III) are extracted as di-solvated species by TBX-BisDGA or TBE-BisDGA. The extraction mechanism was described and the apparent extraction equilibrium constant as well as Gibbs free energy change, enthalpy change and entropy change were presented. In addition, their Eu(III) complexes were analyzed by using infrared spectra.     

Combining CMPO and HEH[EHP] for Separating Trivalent Lanthanides from the Transuranic Elements

Combining octyl(phenyl)-N,N-diisobutyl-carbamoylmethylphosphine oxide (CMPO) and 2-ethylhexylphosphonic acid mono-2-ethylhexyl ester (HEH[EHP]) into a single process solvent for separating transuranic elements from liquid high-level waste is explored. The lanthanides and americium can be co-extracted from HNO₃ into 0.2 mol/L CMPO + 1.0 mol/L HEH[EHP] in n-dodecane. The extraction is relatively insensitive to the HNO₃ concentration within 0.1–5 mol/L HNO₃. Americium can be selectively stripped from the CMPO/HEH[EHP] solvent into a citrate-buffered N-(2-hydroxyethyl)ethylenediaminetriacetic acid solution. Separation factors >14 can be achieved in the range pH 2.5–3.7, and the separation factors are relatively insensitive to pH—a major advantage of this solvent formulation.     

Supercritical Fluid Dissolution and Extraction of Trivalent Metal Cations from Different Matrices

Studies on the recovery of trivalent metal ions such as Nd³⁺Eu³⁺ (taken as homologs of Am(III)) from solid oxide (Nd₂O₃), Thorium concentrate (obtained from Monazite ore processing), tissue paper/surgical gloves (rubber), and plant samples have been carried out by supercritical fluid extraction (SFE) using supercritical CO₂ and ethanol/nitric acid. N,N,N’,N’-tetraoctyl diglycolamide (TODGA) was used as the extractant in these studies. The results showed that the recovery of Nd increased with TODGA concentration from 50% (no TODGA) to 70% (10% TODGA) at 3 M HNO₃ in ethanol. However, the extraction of Nd at 1 M HNO₃ was invariant with 1-3% (v/v) TODGA concentration (73 ± 4%). Interestingly, REEs recovery from Th concentrate was ? 60% even without TODGA using ethanol/3 M HNO₃ mixture. On the other hand, quantitative recovery of ^152,154Eu from tissue paper and surgical gloves sample could be achieved using 3 M HNO₃/ethanol mixture. This suggested that it would be possible to decontaminate the contaminated laboratory waste papers using SFE technique.     

Extraction of Lanthanides with N,N′‐Dimethyl‐N,N′‐diphenyl‐malonamide and ‐3,6‐dioxaoctanediamide

Abstract

The extraction properties of the trivalent lanthanides (Ln(III)) with the bidentate N,N′‐dimethyl‐N,N′‐diphenyl‐malonamide (MA) and the tetradentate N,N′‐dimethyl‐N,N′‐diphenyl‐3,6‐dioxaoctanediamide (DOODA) were investigated. These diamides formed by coupling two amide groups with methylene and/or ether groups are bidentate for the MA and tetradentate for the DOODA. By adding a previous data regarding the tridentate N,N′‐dimethyl‐N,N′‐diphenyl‐diglycolamide (DGA), these extraction results enabled us systematically study an effect of number of oxygen donor on its extraction behavior of Ln(III). The change in the distribution ratios (Ds) of Lu(III) with an increase in the HNO₃ concentration is greater than that of La(III) in both the MA and DOODA systems. Therefore, the relationship between the D and atomic number, i.e., the lanthanide pattern, changes with the HNO₃ concentration: the Ds decrease with an increasing atomic number at lower HNO₃ concentrations. The Ds of the lighter Ln(III) are similar to the Ds of the heavier Ln(III) at higher HNO₃ concentrations. The number of the extractant in the extracted species for La(III) and Lu(III) obtained from slope analysis at 4 M HNO₃ in the MA system are about 3, while those in the DOODA system are quite different, i.e., 2 for La(III) and 1.5–3 for Lu(III). The comparison of the extractability of Ln(III) by MA, DOODA, and DGA shows that the magnitude of the Ds is in the sequence of MA < DOODA ? DGA. This suggests the introduction of one ether oxygen atom to the principal chain in the diamides leads to a good extractability for the Ln(III) from HNO₃ solution.     

An Additional Insight into the Correlation between the Distribution Ratios and the Aqueous Acidity of the TODGA System

Abstract

Extraction of Eu(III) and Am(III) from HNO₃ into the organic solvents using N,N,N′,N′‐tetraoctyl‐diglycolamide (TODGA) was investigated in order to study the detailed extraction reaction. The chemical species: 1:2 for metal:TODGA complex is present in polar diluents. On the other hand, the metal complexes need three or more TODGA molecules to remain stable in non‐polar diluents. The HNO₃ concentration dependence on the distribution ratio suggests that HNO₃ participates in the metal extraction. Infrared spectra indicate that the carbonyl oxygen coordinates with Eu(III), and luminescence lifetimes suggest that there are no water molecules in the inner coordination sphere of the extracted Eu‐complex.     

Liquid – Liquid Extraction and Pertraction of Eu(III) from Nitric Acid Medium Using Several Substituted Diglycolamide Extractants

Solvent extraction and supported liquid membrane (SLM) transport properties of Eu(III) from nitric acid feed conditions were investigated using several substituted diglycolamide (DGA) extractants such as N,N,N′N′-tetra-n-octyl diglycolamide (TODGA), N,N,N′N′-tetra(2-ethylhexyl) diglycolamide (T2EHDGA), N,N,N′N′-tetra-n-hexyl diglycolamide (THDGA), N,N,N′N′-tetra-n-pentyl diglycolamide (TPDGA), and N,N,N′N′-tetra-n-decyl diglycolamide (TDDGA). Effects of feed acidity and phase modifier composition on Eu(III) extraction were investigated using the DGAs and the nature of extracted species were ascertained by slope analysis method. The Eu(III) distribution ratio (D_Eu) values were found to decrease in the presence of iso-decanol. In general, the D_Eu values decreased with increased alkyl chain length of the DGA. The extracted species contained only 2 extractant molecules when TPDGA and TDDGA were used while for TODGA about four extractant molecules were found to be present in the extracted species.

The supported liquid membrane transport of Eu(III) was studied under varying experimental conditions using the five DGA extractants. Transport studies using 0.1 M DGA as the extractant suggested the trend as TDDGA > TODGA > T2EHDGA ～ THDGA which significantly changed to TPDGA > THDGA > TODGA > TDDGA > T2EHDGA in the presence of 30% iso-decanol as the phase modifier. The permeability coefficient (P) values were also determined with membranes of varying pore sizes.     

Extraction of Uranium(VI) and Thorium(IV) from Nitric Acid Solution by N,N,N′,N′ – Tetraoctylglutaricamide

Synthesis and characterization of N,N,N′,N′-tetraoctylglutaricamide (TOGA) was carried out and used for extraction of U(VI) and Th(IV) from nitric acid solutions. The processes of extraction were determined by the slope analysis and by analyzing a function that allows the simultaneous treatment of all the experimental points obtained in different conditions. The different factors affecting the extraction distribution ratio(D) of U(VI) and Th(IV) (extraction concentration, concentrations of nitric acid, salting-out agent NaNO₃ concentration, equilibration time, temperature, and types of diluents) were investigated. The results obtained indicated that the extraction species of U(VI) and Th(IV) are mainly extracted as UO₂(NO₃)₂·1.0TOGA and Th(NO₃)₄·1.5TOGA. The apparent equilibrium constant of U(VI) and Th(IV) extraction determined are 3.35 ± 0.03 L³/mol³ and 1.87 ± 0.01 L⁵/mol⁵ at 298 ± 1 K. Thermodynamic parameters such as the free energy(ΔG), enthalpy(ΔH), and entropy(ΔS) changes associated with the extraction processes could be evaluated. Back-extraction of U(VI) and Th(IV) from organic phases was also studied.     

Synthesis and Evaluation of N,N′-dimethyl-N,N′-dicyclohexyl-Malonamide (DMDCMA) as an Extractant for Actinides

A malonamide based extractant, i.e., N,N′-dimethyl-N,N′-dicyclohexyl-malonamide (DMDCMA) was synthesized in a single step and tested for the extraction of several actinide ions such as Am(III), U(VI), Np(IV), Np(VI), Pu(IV), Pu(VI), etc., from nitric acid medium. The extractant was soluble in phenyltrifluoromethylsulphone (PTMS or FS-13) unless stated otherwise. The effect of various experimental parameters, such as the aqueous phase acidity (0.01–3 M HNO₃), nature of the acid, oxidation states of the metal ions, ligand concentration, nature of the diluent and temperature on the extraction behavior of metal ions was studied. The extracted Am(III) species was determined from slope analysis method as [Am(NO₃)₃(DMDCMA)₂]. The extraction of the metal ions was found to increase with the aqueous phase acidity. The temperature variation studies allowed the calculation of the heat of the two-phase extraction reaction as well as the corresponding extraction constants. These studies revealed that DMDCMA showed good extraction for all the actinide metal ions investigated, and have the advantage of single stage synthesis and easier purification protocol.     

The Extraction of TcO− 4 and Pd(II) by Dihexyl-N,N-diethylcarbamoylmethylphosphonate from Nitric Acid

Abstract

The extraction behavior of TcO^? ₄ and Pd(II) from aqueous HNO₃ was studied using dihexyl-N,N-diethylcarbamoylmethylphosphonate. Distribution ratios were studied as a function of contact time; concentration of solute, acid, and extractant; and extraction temperature. Extraction measurements of TcO^? ₄ were also made using H₂SO₄ in the aqueous phase. It was found that the extractant dependency for TcO^? ₄ is third power. Distribution measurements for TcO^? ₄ as a function of temperature in the range of 0–50°C led to a calculation of the thermodynamic quantity ΔH. A third-power extractant dependency for Pd(II) is suggested but is not strongly corroborated. Interpretation of Pd(II) data was hindered by slow kinetics (approximately 1 h to reach equilibrium and variations in distribution ratios with aqueous Pd(II) concentration.     

Selected Alkyl(phenyl)-N,N-dialkylcarbamoylmethylphosphine Oxides as Extractants for Am(III) from Nitric Acid Media

Abstract

A new series of neutral bifunctional extractants, alkyl(phenyl)-N,N-dialkylcarbamoylmethylphosphine oxides, has been prepared and studied as extractants for Am(III) from nitric acid media. Two types of alkyl(phenyl)-N,N-dialkyl CMPO compounds were prepared, one containing N,N-diethyl groups and the other containing N,N-diisobutyl groups. The N,N-diethyl series contained hexyl(phenyl) and 6-methylheptyl(phenyl) derivatives, abbreviated HφDECMPO, and 6-MHφDECMPO, respectively. The N,N-diisobutyl series contained the n-octyl(phenyl), 6-methylheptyl(phenyl), and the 2-ethylhexyl(phenyl) derivatives, abbreviated OφD[IB]CMPO, 6-MHφD[IB]CMPO, and 2-EHφD[IB]CMPO, respectively. Third power extractant dependencies for the extraction of Am(III) from 0.5 and 3 M HNO₃ were obtained at low (<0.25 M) concentrations of extractant, but higher power dependencies were obtained above 0.25 M extractant from 3 M HNO₃. The HφDECMPO, 6-MHφDECMPO, 6-MHφD[IB]CMPO, and OφD[IB]CMPO [all 0.5 M in diethylbenzene (DEB)] are significantly better extractants than DHDECMPO for Am(III) from 1 to 6 M HNO₃. These same extractants have lower D _Am values than DHDECMPO at low acidities. HφDECMPO and OφD[IB]CMPO also have better selectivity for Am(III) over Fe(III) than DHDECMPO. HφDECMPO in DEB has a strong tendency toward the formation of a second liquid organic phase on extracting macroconcentrations of Nd(III) and U(VI) from 3 M HNO₃; however, this behavior is substantially diminished with the OφD[IB]CMPO and 6-MHφD[IB]CMPO compounds.     

Behavior of Molybdenum (VI) in {DMDOHEMA–HDEHP/nitric acid} Liquid–Liquid Extraction Systems

The EXAm (extraction of americium) process was developed for americium recycling in future nuclear fuel cycles. In this solvent extraction system, a combination of two extractants, N,N′-dimethyl-N,N′-dioctyl-hexylethoxy malonamide (DMDOHEMA) and di-2-ethylhexyl phosphoric acid (HDEHP), in TPH (hydrogenated tetrapropylene) is used to extract americium in the first step of the process at high acidity (HNO₃ 5–6 M). Americium is co-extracted with light lanthanides and other fission products like molybdenum, iron, ruthenium, etc.. Molybdenum is selectively scrubbed during the second step at low acidity using citric or glycolic acid as a buffer and complexing agent. The speciation of Mo(VI) in aqueous solutions is highly dependent on acidity and Mo concentration. In this article, a simple thermodynamical model is proposed for Mo(VI) scrubbing based on batch extraction experiments (with pH and cation concentration variations) and stoichiometries of complexes formed in the organic phase according to electrospray ionization mass spectrometry (ESI-MS) experiments and published data on Mo(VI) speciation. At high acidity ([HNO₃] > 1 M), the MoO₂²⁺ species is strongly extracted by the solvent DMDOHEMA–HDEHP according to a solvate mechanism. At lower acidity ([HNO₃] < 1 M), cation exchange mechanisms become predominant and DMDOHEMA does not participate to the extraction Mo(VI) anymore. During Mo scrubbing at pH higher than 1, the extraction of Mo as neutral species (like MoO₃) and anionic species (like MoO₄^2–) has to be taken into account in the model to predict the “bell-shape” of Mo distribution ratio evolution as a function of pH. This model was then implemented in the PAREX simulation code developed by the CEA to build the flowsheet for the “Mo scrubbing” section of EXAm process and predict Mo concentrations profiles in batteries of mixer-settlers during pilot-scale tests.     

Extraction behavior of strontium from nitric acid medium with N,N’-dimethyl-N,N’-dioctyldiglcolamide

Strontium-90 (⁹⁰Sr), one of the most significant fission products carried into high-level waste (HLW), should preferably be separated from HLW. In this investigation, the extraction of Sr²⁺ was carried out using N,N’-dimethyl-N,N’-dioctyldiglcolamide (DMDODGA) in 40/60 (V/V)% 1-octanol/kerosene or ionic liquid (IL) [C₆mim][Tf₂N]. The composition of the extracted complex between DMDODGA and HNO₃ depends on the aqueous HNO₃ concentration. The distribution ratio of Sr²⁺ (D_Sr) is influenced by the initial concentration of HNO₃ and strontium in the aqueous phase, the concentration of DMDODGA, and temperature. The stoichiometry of Sr²⁺ and DMDODGA in the extracted complex is 1:3. D_Sr in the IL is two orders of magnitude higher than that in 40/60 (V/V)% 1-octanol/kerosene at lower acidity.     

Mixed Monofunctional Extractants for Trivalent Actinide/Lanthanide Separations: TALSPEAK-MME

The basic features of an f-element extraction process based on a solvent composed of equimolar mixtures of Cyanex-923 (a mixed trialkyl phosphine oxide) and 2-ethylhexylphosphonic acid mono-2-ethylhexyl ester (HEH[EHP]) extractants in n-dodecane are investigated in this report. This system, which combines features of the TRPO and TALSPEAK processes, is based on co-extraction of trivalent lanthanides and actinides from 0.1 to 1.0 M HNO₃ followed by application of a buffered aminopolycarboxylate solution strip to accomplish a Reverse TALSPEAK selective removal of actinides. This mixed-extractant medium could enable a simplified approach to selective trivalent f-element extraction and actinide partitioning in a single process. As compared with other combined process applications in development for more compact actinide partitioning processes (DIAMEX-SANEX, GANEX, TRUSPEAK, ALSEP), this combination features only monofunctional extractants with high solubility limits and comparatively low molar mass. Selective actinide stripping from the loaded extractant phase is done using a glycine-buffered solution containing N-(2-hydroxyethyl)ethylenediaminetriacetic acid (HEDTA) or triethylenetetramine-N,N,N’,N’’,N’’’,N’’’-hexaacetic acid (TTHA). The results reported provide evidence for simplified interactions between the two extractants and demonstrate a pathway toward using mixed monofunctional extractants to separate trivalent actinides (An) from fission product lanthanides (Ln).     

Investigation into Coordination States of Diglycolamide and Dioxaoctanediamide Complexes with Lanthanide Elements Using Spectroscopic Methods

The extraction behavior and complexation state of diglycolamide (DGA) and dioxaoctanediamide (DOODA) ligands were investigated for several trivalent lanthanide ions (Ln(III)). The stoichiometry of the extraction of La(III), Nd(III), and Ho(III) with the hydrophobic ligands, N,N,N’,N’-tetraoctyl diglycolamide (TODGA) and N,N,N’,N’-tetraoctyl dioxaoctanediamide (DOODA(C8)), was determined by slope analyses in CHCl₃ and CCl₄ system. Ultraviolet-visible (UV-Vis) spectroscopy was employed for determination of the stability constants (β) of trivalent lanthanide ion (Ln³⁺) with the hydrophilic ligands, N,N,N’,N’-tetraethyl diglycolamide (TEDGA) and N,N,N’,N’-tetraethyl dioxaoctanediamide (DOODA(C2)). DGA ligands are found to have an affinity of heavier Ln(III), while DOODA ligands prefer to coordinate with lighter Ln(III). Infrared (IR) and nuclear magnetic resonance (NMR) spectroscopic measurements reveal that the carbonyl oxygen atoms of TODGA and DOODA(C8) worked as dominant donors in complexation with La(III). In contrast, the ether oxygen of the hydrophilic ligands makes major contribution to formation of La(III) complex.     

Extraction of Actinide(III,IV, V,VI) Ions and TcO4 − by N,N,N′,N′‐Tetraisobutyl‐3‐Oxa‐Glutaramide

Abstract

The extraction behavior of U(VI), Np(V), Pu(IV), Am(III), and TcO₄ ^? with N,N,N′,N′‐tetraisobutyl‐3‐oxa‐glutaramide (TiBOGA) were investigated. An organic phase of 0.2 mol/L TiBOGA in 40/60% (V/V) 1‐octanol/kerosene showed good extractability for actinides (III, IV, V VI) and TcO₄ ^? from aqueous solutions of HNO₃ (0.1 to 4 mol/L). At 25°C, the distribution ratio of the actinide ions (D _An) generally increased as the concentration of HNO₃ in the aqueous phase was increased from 0.1 to 4 mol/L, while the D _Tc at first increased, then decreased, with a maximum of 3.0 at 2 mol/L HNO₃. Based on the slope analysis of the dependence of D _M (M=An or Tc) on the concentrations of reagents, the formula of extracted complexes were assumed to be UO₂L₂(NO₃)₂, NpO₂L₂(NO₃), PuL(NO₃)₄, AmL₃(NO₃)₃, and HL₂(TcO₄) where L=TiBOGA. The enthalpy and entropy of the corresponding extraction reactions, Δ_r H and Δ_r S, were calculated from the dependence of D on temperature in the range of 15–55°C. For U(VI), Np(V), Am(III) and TcO₄ ^?, the extraction reactions are enthalpy driven and disfavored by entropy (Δ_r H<0 and Δ_r S<0). In contrast, the extraction reaction of Pu(IV) is entropy driven and disfavored by enthalpy (Δ_r H>0 and Δ_r S>0). A test run with 0.2 mol/L TiBOGA in 40/60% 1‐octanol/kerosene was performed to separate actinides and TcO₄ ^? from a simulated acidic high‐level liquid waste (HLLW), using tracer amounts of ²³⁸U(VI), ²³⁷Np(V), ²³⁹Pu(IV), ²⁴¹Am(III) and ⁹⁹TcO₄ ^?. The distribution ratios of U(VI), Np(V), Pu(IV), Am(III) and TcO₄ ^? were 12.4, 3.9, 87, >1000 and 1.5, respectively, confirming that TiBOGA is a promising extractant for the separation of all actinides and TcO₄ ^? from acidic HLLW. It is noteworthy that the extractability of TiBOGA for Np(V) from acidic HLLW (D _Np(V)=3.9) is much higher than that of many other extractants that have been studied for the separation of actinides from HLLW.     

2,2′‐(Methylimino)bis(N,N‐dioctylacetamide) (MIDOA), A New Tridentate Extractant for Technetium(VII), Rhenium(VII), Palladium(II), and Plutonium(IV)

2,2′‐(Methylimino)bis(N,N‐dioctylacetamide) (MIDOA) was developed as a new extractant for technetium. MIDOA has a similar backbone to TODGA, N,N,N′,N′‐tetraoctyldiglycolamide, where the nitrogen atom bearing a methyl group replaces the ether oxygen in TODGA. MIDOA is highly lipophilic and ready to use in the HNO₃–n‐dodecane extraction system. The distribution ratio (D) for Tc(VII) is extremely high. In addition, Cr(VI), Re(VII), Mo(VI), W(VI), Pd(II), and Pu(IV) are well extracted by MIDOA. MIDOA has high selectivity toward certain oxometallates. The D(Tc) values decrease gradually with HNO₃, H⁺, and NO₃ ^? concentrations, and the log D vs log [MIDOA] dependence indicates the species extracted to be the 1:1 metal‐ligand complex. It is clear that MIDDA [2,2′‐(methylimino)bis(N,N‐didodecylacetamide)] and IDDA [2,2′‐(imino)bis(N,N‐didodecylacetamide)], which have structures analogous to MIDOA, have similar extraction behavior to that of MIDOA.