High efficiency and low driving voltage blue/white electrophosphorescence enabled by the synergistic combination of singlet and triplet energy of bicarbazole derivatives

New host materials (BCz–DBT and BCz–DBF) are synthesized by regrouped 3,3-bicarbazole (BCz) and dibenzothiophene (DBT)/dibenzofuran (DBF). Their thermal, electrochemical, electronic absorption and photoluminescent properties are also carefully investigated. The materials exhibit high glass transition temperatures (T_g) of 134 °C and 139 °C, respectively. This kind of molecular design can effectively achieve high triplet energies and suitable highest occupied molecular orbital and lowest unoccupied molecular orbital (HOMO/LUMO) energy levels. High external quantum efficiencies (EQE) of sky blue (EQE = 25%) and three-color white (EQE = 21.4%) phosphorescent OLEDs have been achieved by using BCz–DBF as the host material.     

Highly efficient Organic Light-Emitting Diodes from thermally activated delayed fluorescence using a sulfone–carbazole host material

Organic Light-Emitting Diodes (OLEDs) using the thermally activated delayed fluorescence (TADF) emitter (4s,6s)-2,4,5,6-tetra(9H-carbazol-9-yl)isophthalonitrile (4CzIPN) are demonstrated using a novel ambipolar host 3,5-di(carbazol-9-yl)-1-phenylsulfonylbenzene (mCPSOB). When doped in a 5 wt.% concentration, OLEDs with EL efficiency values of more than 81 cd/A for current efficacy and 26.5% for external quantum efficiency are reported. These devices exhibit a low turn-on voltage of 3.2 V at 10 cd/m², as well as reduced efficiency roll-off at high current densities. To the best of our knowledge, these are among the highest ever reported efficiencies for TADF OLEDs, and are even comparable to the highest reported efficiencies for phosphorescent OLEDs.     

High sensitivity organic photodiodes with low dark currents and increased lifetimes

Organic semiconductors hold the promise for large-area, low-cost image sensors and monolithically integrated photonic microsystems. This requires the availability of photodiodes offering at the same time high quantum efficiency, low noise and long lifetimes. Although published structures of organic photodiodes offer high external quantum efficiencies (EQE) of up to 76% [F. Padinger, R.S. Rittberber, N.S. Sariciftci, Effects of postproduction treatment on plastic solar cells, Advanced Functional Materials 13 (2003) 1, P. Schilinsky, C. Waldauf, C.J. Brabec, Recombination loss analysis in polythiophene based bulk heterojunction photodetectors, Applied Physics Letters 81 (20) (2002) 3885], [1], [2] they normally suffer from short lifetimes of only a few hundred hours as well as large dark currents. In our work the lifetime of a poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl-C61 butyric acid methyl ester (PCBM) heterojunction photodiode structure was increased to several thousand hours by omitting the widely used poly(3,4-ethylenedioxythiophene):poly(styrenesulfonic acid) (PEDOT:PSS) anode layer. In addition, a simple model of optical interference and absorption effects was used to find the optimum thickness that combines high quantum efficiency with low dark current. As a result, we report on organic photodiodes with state-of-the-art EQE of 70% at 0 V bias, an on/off current ratio of 10⁶ at −1 V and 40 mW/cm² illumination, dark current densities below 10 nA/cm² at −1 V, and a lifetime of at least 3000 h.     

Orange phosphorescent organic light-emitting diodes with high operational stability

In this article we report on the performances of phosphorescent orange organic light-emitting diodes (OLEDs) having a high operational stability. The fabricated devices all consist of a “hybrid” structure, where the hole-injection layer was processed from solution, while the rest of the organic materials were deposited by vacuum thermal evaporation. A device stack having an emissive layer comprising a carbazole-based host TCzMe doped with the orange phosphor tris(2-phenylquinoline)iridium(III) [Ir(2-phq)₃] shows improved efficiencies compared to a the same device with the standard N,N′-bis(naphthalen-1-yl)-N,N′-bis(phenyl)-benzidine (NPB) as host material. External quantum efficiency (EQE) up to 7.4% and a power efficiency of 16 lm/W were demonstrated using TCzMe. Most importantly, the operational stability of the device was largely improved, resulting in extrapolated values reaching lifetimes well above 100,000 h at initial luminance of 1000 Cd/m².     

Molecular modification on bisphenanthroimidazole derivative for deep-blue organic electroluminescent material with ambipolar property and high performance

Efficient deep-blue fluorescent emitters are of particular significance in organic light-emitting devices (OLEDs). An ambipolar deep-blue emitter, 4,4′-bis(4-(1-(4-(tert-butyl)phenyl)-1H-phenanthro[9,10-d]imidazol-2-yl)phenyl)-1,1′-binaphthalene (2NBTPI), was designed, synthesized and applied in a high-efficiency deep-blue emitting OLED. By modifying with binaphthyl, 2NBTPI exhibits a high thermal stability, deep blue emission as well as spatially separated HOMO and LUMO orbits. Comparing with its mononaphthyl counterpart 1,4-bis(4-(1-(4-(tert-butyl)phenyl)-1H-phenanthro[9,10-d]imidazol-2-yl)phenyl)naphthalene (NBTPI), 2NBTPI shows more balanced charge transport properties, better color purity (color index: (0.15, 0.09) versus (0.15, 0.11)), higher external quantum efficiency (EQE) (5.95% versus 5.73%) and slower efficiency roll-off (EQE roll-off at 100 mA cm⁻²: 13.1% versus 27.6%). To the best of our knowledge, OLED performances of 2NBTPI are comparable to the best reported non-doped deep-blue emitters.     

Improved out-coupling efficiency of organic light emitting diodes by manipulation of optical cavity length

The relationship between thickness of electron transport layer (ETL) and device performance of organic light-emitting diodes (OLEDs) was investigated. Especially, we prepared various OLEDs by varying the thickness of ETL to investigate the difference of device performance. Very interestingly, the device efficiency of green phosphorescent organic light emitting diodes (PHOLEDs) was significantly improved when the thickness of ETL was optimized even though we did not change any materials for such devices except that we applied highly conductive Li doped ETL. This means that the only one factor which is associated with an improvement of device efficiency could be originated from the constructive optical interference. As a result, the simple modification of PHOLEDs only by changing the optical thickness condition causes a dramatic improvement of current efficiency (up to 82.4 cd/A) as well as external quantum efficiency (EQE, up to 23.8%), respectively. Those values correspond to the much more improved ones (by ∼34.4%) compared to those obtained from the normal devices with thin ETL as a reference.     

Fluorene derivatives for highly efficient non-doped single-layer blue organic light-emitting diodes

Diphenylamino- and triazole-endcapped fluorene derivatives which show a wide energy band gap, a high fluorescence quantum yield and high stability have been synthesized and characterized. Single-layer electroluminescent devices of these fluorene derivatives exhibited efficient deep blue to greenish blue emission at low driving voltage. The single-layer OLED of PhN-OF(1)-TAZ shows a maximum current efficiency of 1.54 cd/A at 20 mA cm⁻² with external quantum efficiency (EQE) of 2.0% and CIE coordinates of (0.153, 0.088) in deep blue region, while the single-layer device of oligothienylfluorene PhN-OFOT-TAZ shows a maximum brightness of 7524 cd/m² and a maximum current efficiency of 2.9 cd/A with CIE coordinates of (0.20, 0.40) in greenish blue.     

Organic photovoltaic devices based on pentacene/N,N′-dioctyl-3,4,9,10-perylenedicarboximide heterojunctions

We have studied an organic photovoltaic cell based on an efficient donor/acceptor combination of pentacene/N,N′-dioctyl-3,4,9,10-perylenedicarboximide (PTCDI-C₈) heterojunctions. Photocurrent spectra exhibited excellent light harvesting throughout the visible spectrum with maximum external quantum efficiency (EQE) of ～60%. PTCDI-C₈ layer provided significant contribution to the photocurrent due to its strong absorption properties and efficient exciton dissociation at pentacene/PTCDI-C₈ interface. Power conversion efficiency of about 1.2% has been achieved under AM 1.5 illumination. The device showed a low series resistance of 18 Ω cm² and a high shunt resistance of 2.5 kΩ cm², resulting in a high fill factor of 65%.     

Cadmium-free quantum dots based violet light-emitting diodes: High-efficiency and brightness via optimization of organic hole transport layers

Bright and efficient violet quantum dot (QD) based light-emitting diodes (QD-LEDs) with heavy-metal-free ZnSe/ZnS have been demonstrated by choosing different hole transport layers, including poly(4-butyl-phenyl-diphenyl-amine) (poly-TPD), poly[9,9-dioctylfluorene-co-N-[4-(3-methylpropyl)]-diphenylamine] (TFB), and poly-N-vinylcarbazole (PVK). Violet QD-LEDs with maximum luminance of about 930 cd/m², the maximum current efficiency of 0.18 cd/A, and the peak EQE of 1.02% when poly-TPD was used as HTL. Higher brightness and low turn-on voltage (3.8 V) violet QD-LEDs could be fabricated when TFB was used as hole transport material. Although the maximum luminance could reach up to 2691 cd/m², the devices exhibited only low current efficiency (∼0.51 cd/A) and EQE (∼2.88%). If PVK is used as hole transport material, highly efficient violet QD-LEDs can be fabricated with lower maximum luminance and higher turn-on voltages compared with counterpart using TFB. Therefore, TFB and PVK mixture in a certain proportion has been used as HTL, turn-on voltage, brightness, and efficiency all have been improved greatly. The QD-LEDs is fabricated with 7.39% of EQE and 2856 cd/m² of maximum brightness with narrow FWHM less than 21 nm. These results represent significant improvements in the performance of heavy-metal-free violet QD-LEDs in terms of efficiency, brightness, and color purity.     

Efficient planar organic solar cells with the high near-infrared response

Efficient planar organic solar cells extending the response into the near-infrared (NIR) were fabricated using the highly ordered Titanyl phthalocyanines (TiOPc) films as the donor layer. This type of films obtained through the weak epitaxy growth (WEG) method presents good continuity and integrity with the low density of grain boundaries. More importantly the films own a strong absorption in the NIR (750–950 nm) and a broad absorption spectrum from 550 to 950 nm. Meanwhile the high external quantum efficiency (EQE) is obtained in the NIR with the peak value over 38% and the EQE is over 18% in the entire response range, which could benefit from the long exciton diffusion length and the high carrier mobility of the highly ordered films. Thereby the fabricated planar solar cells achieve a high short-circuit current density (J_sc) of 9.26 mA cm^?2 and a power conversion efficiency (PCE) of 2.67%.     

Organic light-emitting diode-based plausibly physiologically-friendly low color-temperature night light

Light sources with lower color temperature (CT) show markedly less suppression effect on the secretion of melatonin, an oncostatic hormone. Light sources with higher color rendering index (CRI) provide better visual comfort. In this report, we demonstrate the design and fabrication of low CT, high CRI fluorescent organic light-emitting diode (OLED) with five-band emitting from a single emissive layer. The best performed device exhibits a CT of 1773 K, much lower than that of candles (1800–2000 K) or incandescent bulbs (2000–2500 K), 87 CRI, a beyond theoretical limit external quantum efficiency (EQE) 6.4%, and 11.9 lm/W at 100 cd/m². One major reason for having the ultra-low CT and relative high CRI may be attributed to the significantly intensive deep red emission. The comparatively high efficacy and EQE may be attributed to the employment of a smooth stepwise energy-level structure, enabling low injection barriers and balance carrier injection.     

High efficiency and non-color-changing orange organic light emitting diodes with red and green emitting layers

We report a high performance orange organic light-emitting diode (OLED) where red and green phosphorescent dyes are doped in an exciplex forming co-host as separate red and green emitting layers (EMLs). The OLED shows a maximum external quantum efficiency (EQE) of 22.8%, a low roll-off of efficiency with an EQE of 19.6% at 10,000 cd/m², and good orange color with a CIE coordinate of (0.442, 0.529) and no color change from 1000 to 10,000 cd/m². The exciplex forming co-host system distributes the recombination zone all over the EMLs and reduces the triplet exciton quenching processes.     

High-performance azure blue quantum dot light-emitting diodes via doping PVK in emitting layer

Highly bright and efficient azure blue quantum dot-based light-emitting diodes (QD-LEDs) have been demonstrated by employing ZnCdSe core/multishell QDs as emitters and the crucial development we report here is the ability to dramatically enhance the efficiency and brightness through doping poly vinyl(N-carbazole) (PVK) in the emissive layer to balance the charge injection. The best device displays remarkable features like maximum luminance of 13,800 cd/m², luminous efficiency of 6.41 cd/A, and external quantum efficiency (EQE) of 8.76%, without detectable red-shift and broadening in electroluminescence (EL) spectra with increasing voltage as well as good spectral matching between photoluminescence (PL) and EL. Such azure blue quantum-dot LEDs show a 140% increase in external quantum efficiency compared with QD-LEDs without PVK. More important, the peak efficiency of the QD-LEDs with PVK dopant is achieved at luminance of about 1000 cd/m², and high efficiency (EQE > 8%) can be maintained with brightness ranging from 200 to 2400 cd/m². There are two main aspects of the role of PVK in the proposed system. Firstly, the lower HOMO of PVK than (poly[9,9-dioctylfluorene-co-N-[4-(3-methylpropyl)]-diphenylamine] (TFB) can reduce the potential barrier for 0.4 eV at the interface of QDs and hole transport layer which could result in higher hole injection efficiency along with good EQE as compared to TFB-only HTLs. Secondly, with PVK acting as buffer layer of TFB and QDs, the exciton energy transfer from the organic host to the QDs can be effectively improved.     

High-efficiency low color temperature organic light emitting diodes with solution-processed emissive layer

Low color temperature (CT) lighting provides a warm and comfortable atmosphere and shows mild effect on melatonin suppression. A high-efficiency low CT organic light emitting diode can be easily fabricated by spin coating a single white emission layer. The resultant white device shows an external quantum efficiency (EQE) of 22.8% (34.9 lm/W) with CT 2860 K at 100 cd/m², while is shown 18.8% (24.5 lm/W) at 1000 cd/m². The high efficiency may be attributed to the use of electroluminescence efficient materials and the ambipolar-transport host. Besides, proper device architecture design enables excitons to form on the host and allows effective energy transfer from host to guest or from high triplet guest to low counterparts. By decreasing the doping concentration of blue dye in the white emission layer, the device exhibited an orange emission with a CT of 2280 K. An EQE improvement was observed for the device, whose EQE was 27.4% (38.8 lm/W) at 100 cd/m² and 20.4% (24.6 lm/W) at 1000 cd/m².     

Charge transport and recombination in heterostructure organic light emitting transistors

Light-emitting field effect transistors (LEFETs) are a class of organic optoelectronic device capable of simultaneously delivering the electrical switching characteristics of a transistor and the light emission of a diode. We report on the temperature dependence of the charge transport and emissive properties in a model organic heterostructure LEFET system from 300 K to 135 K. We study parameters such as carrier mobility, brightness, and external quantum efficiency (EQE), and observe clear thermally activated behaviour for transport and injection. Overall, the EQE increases with decreasing temperature and conversely the brightness decreases. These contrary effects can be explained by a higher recombination efficiency occurring at lower temperatures, and this insight delivers new knowledge concerning the optimisation of both the transport and emissive properties in LEFETs.     

Doping-free orange and white phosphorescent organic light-emitting diodes with ultra-simply structure and excellent color stability

We demonstrate simplified doping-free orange phosphorescent organic light-emitting diodes (OLEDs) based on ultrathin emission layer. The optimized orange device has the maximum current efficiency of 52.1 cd/A and power efficiency of 36.3 lm/W, respectively. Efficient simplified doping-free white OLEDs employing blue and orange ultrathin emission layers have excellent color stability, which is attributed to the avoidance of the movement of charges recombination zone and no differential color aging. One white device exhibits high efficiency of 33.6 cd/A (30.1 lm/W). Moreover, the emission mechanism of doping-free orange and white OLEDs is also discussed.     

Highly efficient bluish green phosphorescent organic light-emitting diodes based on heteroleptic iridium(III) complexes with phenylpyridine main skeleton

A new series of heteroleptic iridium(III) complexes, bis(2-phenylpyridinato-N,C2′)iridium (2-(2′,4′-difluorophenyl)-4-methylpyridine), (ppy)₂Ir(dfpmpy) and bis(2-(2′,4′-difluorophenyl)-4-methylpyridinato-N,C2′)iridium (2-phenylpyridine) (dfpmpy)₂Ir(ppy), have been synthesized by using phenylpyridine as a main skeleton for bluish green phosphorescent organic light-emitting diodes (PhOLEDs). The Ir(III) complexes showed high thermal stability and high photoluminescent (PL) quantum yields of 95% ± 4% simultaneously. As a result, the PhOLEDs with the heteroleptic Ir(III) complexes showed excellent performances approaching 100% internal quantum efficiency with a very high external quantum efficiency (EQE) of ∼27%, a low turn-on voltage of 2.4 V, high power efficiency of ∼85 lm/W, and very low efficiency roll-off up to 20,000 cd/m².     

Efficient and stable red organic light emitting devices from a tetradentate cyclometalated platinum complex

An efficient and stable red phosphorescent organic light emitting diode was developed using a tetradentate cyclometalated platinum complex. Devices employing the phosphorescent molecule, platinum(II)-9-(4-methylpyridin-2-yl)-2-(3-(quinolin-2-yl)phenoxy)-9H-carbazole (PtON11Me), yielded high external quantum efficiencies and high operational lifetimes. A maximum EQE of 12.5% and color coordinates CIE (x = 0.61, y = 0.36) was achieved in devices employing efficient hole blocking and transporting materials and a high operational lifetime of T_0.97 ∼ 3200 h was achieved in devices utilizing electrochemically stable hole blocking and transporting materials.     

Functionalized terfluorene for solution-processed high efficiency blue fluorescence OLED and electrophosphorescent devices

A new multifunctional blue-emitting terfluorene derivative (TFDPA) featured with triphenylamine groups for hole-transportation and long alkyl chains for solution processability on the conjugation inert bridge centers was reported. TFDPA can give homogeneous thin film by solution process and exhibits high hole mobility (μ_h ≈ 10^?3 cm² V^?1 s^?1) and suitable HOMO for hole injection. Particularly, TFDPA performs efficient deep-blue emission with high quantum yield (～100% in solution, 43% in thin film) and suitable triplet energy (E_T = 2.28 eV), making solution-processed OLED devices of using TFDPA as blue emitter and as host for iridium-containing phosphorescent dopants feasible. The solution-processed nondoped blue OLED device gives saturated deep-blue electroluminescence [CIE = (0.17, 0.07)] with EQE of 2.7%. TFDPA-hosted electrophosphorescent devices performed with EQE of 6.5% for yellow [(Bt)₂Ir(acac)], 9.3% of orange [Ir(2–phq)₃], and 6.9% of red [(Mpq)₂Ir(acac)], respectively. In addition, with careful control on the doping concentration of [(Bt)₂Ir(acac)], a solution-processed fluorescence–phosphorescence hybrided two-color-based WOLED with EQE of 3.6% and CIE coordinate of (0.38, 0.33) was successfully achieved.