Fast microwave synthesis of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> and Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/Ag magnetic nanoparticles using Fe<Superscript>2+</Superscript> as precursor

A simple and quick microwave method to prepare high performance magnetite nanoparticles (Fe₃O₄ NPs) directly from Fe has been developed. The as-prepared Fe₃O₄ NPs product was fully characterized by X-ray diffraction, transmission electron microscopy and scanning electron microscopy. The results show that the as-prepared Fe₃O₄ NPs are quite monodisperse with an average core size of 80 × 5 nm. The microwave synthesis technique can be easily modified to prepare Fe₃O₄/Ag NPs and these NPs possess good magnetic properties. The formation mechanisms of the NPs are also discussed. Our proposed synthesis procedure is quick and simple, and shows potential for large-scale production and applications for catalysis and biomedical/biological uses.     

Preparation of magnetic composites through SrO-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-B<Subscript>2</Subscript>O<Subscript>3</Subscript> glass crystallization

Glasses with nominal compositions 11SrO · 5.5Fe₂O₃ · 4.5Al₂O₃ · 4B₂O₃ (1) and 15SrO · 5.5Fe₂O₃ · 4.5Al₂O₃ · 4B₂O₃ (2) were prepared by rapidly quenching oxide melts between counterrotating steel rollers. The glasses were then heat-treated in the range 650–950°C to produce glass-ceramic samples. The samples were characterized by X-ray diffraction, electron microscopy, and magnetic measurements. The phase composition of the glass-ceramics was determined, and their microstructure and magnetic properties were studied. The annealing temperature was shown to have a strong effect on the coercivity of the materials, which reaches 650 and 570 kA/m for compositions 1 and 2, respectively.     

Characterization and electrical properties of semiconducting Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>-Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-K<Subscript>2</Subscript>B<Subscript>4</Subscript>O<Subscript>7</Subscript> glasses

Semiconducting glasses of the Fe₂O₃-Bi₂O₃-K₂B₄O₇ system were prepared by the press-quenching method and their dc conductivity in the temperature range 223–393 K was measured. The glass transition temperature values (T_g) of the present glasses were larger than those of tellurite glasses. This indicates a higher thermal stability of the glass in the present system. The density for these glasses was consistent with the ionic size, atomic weight and amount of different elements in the glasses. Mössbauer results revealed that the relative fraction of Fe increases with increasing Fe₂O₃ content. Electrical conductivity showed a similar composition dependency as the fraction of Fe. The glasses had conductivities ranging from 10 to 10 Scm at temperatures from 223 to 393 K. Electrical conduction of the glasses was confirmed to be due to non-adiabatic small polaron hopping and the conduction was primarily determined by hopping carrier mobility.     

Synthesis and microwave absorption properties of sandwich-type CNTs/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/RGO composite with Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> as a bridge

A novel sandwich-type CNTs/Fe₃O₄/RGO composite with Fe₃O₄ as a bridge was successfully prepared through a simple solvent-thermal and ultrasonic method. The structure and morphology of the composite have been characterized by Fourier-transform infrared spectroscopy, X-ray diffraction and scanning electron microscopy. This new structure can effectively prevent the agglomeration of GO and the combination of CNTs/Fe₃O₄ and RGO shows a strong reflection loss (R_L) (?50 dB) at 8.7 GHz with absorber thickness of 2.5 mm. Moreover, compared with CNTs/Fe₃O₄/GO composite, it is found that the thermal treating process is beneficial to enhance the microwave absorption properties, which may be attributed to high conductivity of RGO. On this basis, the microwave absorbing mechanism is systematically discussed. All the data show that the CNTs/Fe₃O₄/RGO composite exhibits excellent microwave absorption properties with light density and is expected to have potential applications in microwave absorption.     

Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-platelet reinforced glass matrix composites from a mixture of wastes

Wastes consisting of mining residues from feldspar excavation, lime from fume abatement systems of the glass industry and panel glass from dismantled cathode ray tubes have been converted into an opaque fluorine-containing glass, featuring the precipitation of CaF₂ crystals just upon cooling. Fine glass powders were added with Al₂O₃ platelets (from 5% to 15% by vol.) and viscous flow pressureless sintered at 800 °C for 1 h, leading to dense glass matrix composites. Due the overall mechanical properties, approaching those available for glass–ceramics, coupled with a simple and economical manufacturing procedure, the obtained products could find applications in the building industry and constitute a promising way for the absorption of the investigated wastes.     

Electrical properties of some Y<Subscript>2</Subscript>O<Subscript>3</Subscript> and/or Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>-containing lithium silicate glasses and glass-ceramics

The ac electrical properties of some lithium silicate glasses and glass-ceramics containing varying proportions of Y₂O₃ and/or Fe₂O₃ were measured to investigate their electronic hopping mechanism. There is a clear variation of these properties with composition. The obtained results were related to the concentration and role of Y₂O₃ and/or Fe₂O₃ in the lithium silicate glass structure. In crystalline solids the electrical properties data obtained were correlated to the type and content of the mineral phases formed as indicated by X-ray diffraction analysis (XRD). The conductivity, dielectric constant and dielectric loss of the studied glasses were studied using the frequency response in the interval 30 Hz–100 KHz and the effect of compositional changes on the measured properties was investigated. The measurements revealed that the electrical responses of the samples were different and complex. The addition of Y₂O₃ generally, decreased the ac conductivity, dielectric constant and dielectric losses of the lithium silicate glasses. The addition of Fe₂O₃ in Y₂O₃-containing glasses increases the conductivity, while, the dielectric constant and dielectric losses were found to be decreased. However, the addition of Fe₂O₃ instead of Y₂O₃ led to decrease the ac conductivity and increased their dielectric constant and dielectric losses. The obtained data were argued to the internal structure of the lithium silicate glass and the nature or role-played by weakness or rigidity of the structure of the sample. Lithium disilicate-Li₂Si₂O₅, lithium metasilicate-Li₂SiO₃, two forms of yttrium silicate Y₂Si₂O₇ & Y₂SiO₅, iron yttrium oxide-YFeO₃, lithium iron silicate-LiFeSi₂O₆ and α-quartz phases were mostly developed in the crystallized glasses. The conductivity of the crystalline materials was found to be relatively lower than those of the glass. At low frequency, as the Y₂O₃ content increased the ac conductivity, dielectric constant and dielectric loss data of the glass-ceramics decreased. However, the addition of Fe₂O₃ to the Y₂O₃ containing glass-ceramic led to increase the conductivity. The addition of high content of Fe₂O₃ instead of Y₂O₃ in the glass ceramic led to increase the ac conductivity.     

Structural studies of a new electroceramic composite: Pb(Fe<Subscript>0.5</Subscript>Nb<Subscript>0.5</Subscript>)O<Subscript>3</Subscript> (PFN)-Cr<Subscript>0.75</Subscript>Fe<Subscript>1.25</Subscript>O<Subscript>3</Subscript>(CRFO)

A study of the structural characteristics of the composites [Pb(Fe_0.5Nb_0.5)O₃(PFN)] _x -[Cr_0.75Fe_1.25O₃(CRFO)]_100?x (x = 0 (CRFO100), 10, 50, 90, 100) was performed in this work. The compounds PFN100 and CRFO100 were prepared by conventional solid-state method and investigated by X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM), and ⁵⁷Fe Mössbauer Spectroscopy techniques. The X-ray analysis shows that PFN100 is tetragonal and the CRFO100 phase has a trigonal symmetry. The refinement of all the composites was also performed and discussed in this paper. The Mössbauer spectrum for the composite samples shows a paramagnetic doublet and a sextet probably assigned to a magnetic phase associated to Fe⁺³. For the sample PFN100, only a magnetic field of 49.5 T (isomer shift (δ) = 0.21 mm/s) was detected. For the composite sample, the δ and Δ are typical of Fe ions at sites of octahedral coordination.     

Electrical conductivity of Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-Tm<Subscript>2</Subscript>O<Subscript>3</Subscript>-Nb<Subscript>2</Subscript>O<Subscript>5</Subscript> solid solutions

New solid solutions, Bi_2?x?y Tm _x Nb _y O_3+δ, with tetragonal and cubic structures have been synthesized in the Bi₂O₃-Tm₂O₃-Nb₂O₅ system, and their electrical conductivity has been measured at temperatures from 670 to 1020 K. The 1020-K conductivity of the tetragonal solid solution Bi_1.8Tm_0.15Nb_0.05O_3+δ is comparable to that of Bi_1.75Tm_0.25O₃, the best conductor in the Bi₂O₃-Tm₂O₃ system.     

Epitaxial YBa<Subscript>2</Subscript>Fe<Subscript>3</Subscript>O<Subscript>8</Subscript> Films Prepared by Chemical Solution Deposition Method

YBa₂Fe₃O₈(YBFO) epitaxial films are prepared on (100) SiTrO₃ single crystal substrate by polymer-assisted non-fluorine chemical solution deposition (CSD) method. The influence of firing temperature on texture degree, microstructure, and physical properties of YBFO films is systematically investigated by x-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), and SQUID magnetometer. YBFO film fired at 1070 °C exhibits best epitaxial quality with FWHM value of (103) phi-scan and (005) omega-scan is 0.19° and 0.45°, respectively, and highly dense and smooth morphology. A weak ferromagnetism transition was observed at 68 K in the YBFO film.     

Fabrication of Cr<Subscript>2</Subscript>O<Subscript>3</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> composite nanofibers by electrospinning

PVA(Polyvinyl alcohol)/chromium nitrate/aluminum nitrate composite nanofibers were prepared by using sol–gel processing and electrospinning technique. By high temperature calcinating the above precursor fibers, Cr₂O₃/Al₂O₃ composite nanofibers were successfully obtained. The fibers were characterized by XRD, IR, and SEM, respectively. The results showed that the crystalline phase and the morphology of the fibers depended on the calcination temperatures.     

Lightweight glass/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>-polyaniline composite hollow spheres with conductive and magnetic properties

Lightweight composite hollow spheres with conductive and magnetic properties were prepared by using Hollow Glass Spheres (HGS) as substrate. The morphology, composition, conductive, and magnetic properties of the resultant products were characterized by SEM, EDX, XRD, FTIR spectra, conductivity measurement, and vibrating-sample magnetometry. Polyaniline (PANI) were in situ polymerized on HGS with increasing ratios of PANI to HGS, resulting in the enhanced conductivity of HGS/PANI composites from 1.3 × 10⁻² S/cm to 4.4 × 10⁻² S/cm. Lightweight glass/Fe₃O₄-PANI composite hollow spheres (HGS/Fe₃O₄-PANI) with conductivity of 5.4 × 10⁻³ S/cm and magnetization of 9.25 emu/g were prepared by deposition of Fe₃O₄ nanoparticles onto HGS via electrostatic adsorption first, and then polymerization of aniline onto HGS/Fe₃O₄. The glass/PANI-Fe₃O₄ composite hollow spheres (HGS/PANI-Fe₃O₄) composed of Fe₃O₄ as the outmost layer and PANI as the inner layer were prepared for comparison. The conductivity and magnetization of HGS/PANI-Fe₃O₄ were 1.1 × 10⁻⁴ S/cm and 2.61 emu/g, respectively.     

Effect of Eu<Subscript>2</Subscript>O<Subscript>3</Subscript> doping on the crystallization behavior of BaO-Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-B<Subscript>2</Subscript>O<Subscript>3</Subscript> glasses

We gave studied the crystallization behavior of 30BaO · 25Bi₂O₃ · 45B₂O₃ glasses doped with Eu₂O₃ to different levels. At a Eu₂O₃ content of 7 mol % or higher, the glasses undergo volume crystallization. The only precipitating phase is a solid solution between europium and bismuth oxides. With increasing europium concentration in the glass, the structure of the crystallites changes from cubic to rhombohedral. We have investigated the morphology, physicochemical properties, and luminescence spectra of the glasses and glass-ceramics.     

Study of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> Nano-Magnetic Ferrofluid by Atomic Force Microscope

The magnetic ferrofluid is a special intelligent material and its many properties can be controlled by external magnetic field. This paper introduces the preparation, performance and applications of Fe₃O₄ nano-ferrofluid, principally observed by the microstructure characterization by Atomic Force Microscopy (AFM), and we measured the particle size and morphology of nano-ferrofluid. The magnetic property was analyzed from the microstructure characterization, and the analysis results show that the size of the Fe₃O₄ nano-particle is about 5 nm; the magnetic property is closely related to the chain microstructure and is influenced by the nano-particle distribution in the Fe₃O₄ magnetic ferrofluid.     

Al-doped Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> Nanoparticles and Their Magnetic Properties

Al-doped Fe₃O₄ nanoparticles were synthesized for the first time via the Composite-Hydroxide-Mediated (CHM) method from Fe₃O₄ and Al₂O₃ without using any capping agent. The synthesis technique was one-step and cost effective. The obtained products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersion spectroscopy (EDS). Samples with a tunable size of 500–1500 nm, 200–800 nm, and 100–700 nm could be obtained by adjusting the reaction time and temperature. Magnetic property of the as-synthesized Al-doped Fe₃O₄ nanoparticles was investigated. Magnetic hysteresis loops measured in the field range of −10 kOe<H<10 kOe, indicated the ferromagnetic behavior with coercivity (H _c) of 470 and 110 Oe and remanence magnetization (M _r) of 13 and 6.4 emu/g at the temperature of 5 and 300 K, respectively. The saturation intensity (M _s) was 46.1 emu/g at 5 K, while it was about 43.6 emu/g at 300 K.     

Synthesis and applications of fluorescent-magnetic-bifunctional dansylated Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@SiO<Subscript>2</Subscript> nanoparticles

Bifunctional magnetic-luminescent dansylated Fe₃O₄@SiO₂ (Fe₃O₄@SiO₂-DNS) nanoparticles were fabricated by the nucleophilic substitution of dansyl chloride with primary amines of aminosilane-modified Fe₃O₄@SiO₂ core–shell nanostructures. The morphology and properties of the resultant Fe₃O₄@SiO₂-DNS nanoparticles were investigated by transmission electron microscopy, FT–IR spectra, UV–vis spectra, photoluminescence spectra, and vibrating sample magnetometry. The Fe₃O₄@SiO₂-DNS nanocomposites exhibit superparamagnetic behavior at room temperature, and can emit strong green light under the excitation of UV light. They show very low cytotoxicity against HeLa cells and negligible hemolysis activity. The T ₂ relaxivity of Fe₃O₄@SiO₂-DNS in water was determined to be 114.6 Fe mM⁻¹ s⁻¹. Magnetic resonance (MR) imaging analysis coupled with confocal microscopy shows that Fe₃O₄@SiO₂-DNS can be uptaken by the cancer cells effectively. All these positive attributes make Fe₃O₄@SiO₂-DNS a promising candidate for both MR and fluorescent imaging applications.     

Magnetic properties of Nd-Y<Subscript>3</Subscript>Fe<Subscript>5</Subscript>O<Subscript>12</Subscript> nanoparticles

Nb³⁺-substituted garnet nanoparticles Y_3−xNd_xFe₅O₁₂ (x = 0.0, 0.5, 1.0, 1.5, and 2.0) were fabricated by a sol-gel method and their crystalline structures and magnetic properties were investigated by using X-ray diffraction (XRD), thermal analysis (DTA/TG), and vibrating sample magnetometer (VSM). The XRD patterns of Y_3−xNd_xFe₅O₁₂ have only peaks of the garnet structure and the sizes of particles range from 34 to 70 nm. From the results of VSM, it is shown that when the Nd concentration x ( 1.0, the saturation magnetization of Y_3−xNd_xFe₅O₁₂ increases as the Nd concentration (x) is increased, and gets its maximum at x = 1.0, but when x ( 1.0, the saturation magnetization decreases with increasing the Nd concentration (x), this may be due to the distortion of the microstructure of Y_3−xNd_xFe₅O₁₂, which leads to the decrease of the effective moment formed by Fe³⁺. Meanwhile, it is observed that with the enhancement of the surface spin effects, the saturation magnetization rises as the particle size is increased.     

MgB<Subscript>2</Subscript> with addition of Sb<Subscript>2</Subscript>O<Subscript>3</Subscript> obtained by spark plasma sintering technique

Superconducting bulks of MgB₂ with addition of Sb₂O₃ and Sb with different stoichiometric compositions ((MgB₂) + (Sb₂O₃) _x , x = 0.0025, 0.005, 0.015, and (MgB₂) + (Sb)_y, y = 0.01) were obtained by the Spark Plasma Sintering (SPS) technique. All added samples have high density, above 95% and critical temperature, T _c, of 38.1–38.6 K. This result and XRD data suggest that Sb does not enter the lattice of MgB₂. Impurity phases are Mg₃Sb₂, MgO, and MgB₄. The optimum addition is Sb₂O₃ for x = 0.005. This sample shows the critical current density, J _c(5 K, 0 T) = 4 × 10⁵ A/cm² and J _c(5 K, 7 T) = 6 × 10² A/cm², while the irreversibility field, H _irr (5 K, 100 A/cm²) = 8.23 T. Indicated values of J _c and H _irr are higher than for the pristine sample. The mechanism of J _c and H _irr increase in the Sb₂O₃ added samples is complex and composed of opposite effects most probably involving morphology elements, the presence of nano metric MgB₄ and the indirect influence of oxygen or oxygen and Sb. Crystallite size of MgB₂ is decreasing when Sb-based additions are introduced and the effect is stronger for the Sb-metal addition. The sample with Sb-metal addition does not improve J _c and H _irr when compared with pristine sample.     

Synthesis by the solution combustion process and magnetic properties of iron oxide (Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> and α-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>) particles

This article describes the solution combustion synthesis technique as applicable to iron oxide powder production using urea as fuel and ferric nitrate as an oxidizer. It focuses on the thermodynamic modeling of the combustion reaction under different fuel-to-oxidant ratios. X-ray diffraction showed magnetite (Fe₃O₄) and hematite (α-Fe₂O₃) phase formations for the as-synthesized powders. The smallest crystallite size was obtained by stoichiometric chemical reaction. The magnetic properties of the samples are also carefully discussed as superparamagnetic behavior.     

Temperature-stable and low loss Fe-containing dielectrics in BaO-Ln<Subscript>2</Subscript>O<Subscript>3</Subscript>-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>-Ta<Subscript>2</Subscript>O<Subscript>5</Subscript> system

Polycrystalline samples of Ba₄Ln₂Fe₂Ta₈O₃₀ (Ln = La and Nd) were prepared by a high temperature solid-state reaction technique. The formation, structure, dielectric and ferroelectric properties of the compounds were studied. Both compounds are found to be paraelectrics with filled tetragonal tungsten bronze (TB) structure at room temperature. Dielectric measurements revealed that the present ceramics have exceptional temperature stability, a relatively small temperature coefficient of dielectric constant (τ _ε ) of −25 and −58 ppm/°C, with a high dielectric constant of 118 and 96 together with a low dielectric loss of 1.2 × 10⁻³ and 2.8 × 10⁻³ (at 1 MHz) for Ba₄La₂Fe₂Ta₈O₃₀ and Ba₄Nd₂Fe₂Ta₈O₃₀, respectively. The measured dielectric properties indicate that both materials are possible candidates for the fabrication of discrete multilayer capacitors in microelectronic technology.