一种改进的基于K-SVD字典的图像去噪算法

为了更好地实现图像的去噪效果,提出了一种改进的基于K-SVD（Singular Value Decomposition）字典学习的图像去噪算法。首先,将输入的含噪信号进行K均值聚类分解,将得到的图像块进行稀疏贝叶斯学习和噪声的更新,当迭代到一定次数时继续使用正交匹配追踪（Orthogonal Matching Pursuit,OMP）算法对图像块进行稀疏编码,然后在完成稀疏编码的基础上通过奇异值分解来逐列更新字典,反复迭代至得到过完备字典以实现稀疏表示,最后对处理过的图像进行重构,得到去噪后的图像。实验结果表明,本文的改进算法相对于传统的K-SVD字典的图像去噪能够在保留图像边缘和细节信息的同时,更有效地去除图像中的噪声,具有更好的视觉效果。     

基于稀疏编码的鲁棒型人脸超分辨率重建

为了减少人脸超分图像的边缘伪影和图像噪点,利用基于稀疏编码的单幅图像超分辨率重建算法,在字典学习阶段,结合L1范数引入在线字典学习方法,使字典根据当前输入图像块和上次迭代生成的字典逐列更新,得到更加精确的超完备字典对,用于图像重建.实验中进行的仿真结果表明,改进算法超分结果的峰值信噪比(PSNR)和结构相似性(SSIM)比同类型的稀疏编码超分法(SCSR)和应用在线字典学习算法的超分方法(ODLSR)均有较大幅度提升,比后者平均提升0.72 dB和0.0187.同时,视觉上有效地消除了边缘伪影,且在处理含噪人脸图像时,具备更强的去噪能力和更好的鲁棒性.     

自适应半耦合稀疏字典学习算法

为实现图像超分辨力重建,提出了一个自适应半耦合稀疏字典学习算法。由于耦合字典学习算法中存在稀疏编码约束条件太过严苛的缺点,本文采用半耦合的字典学习算法。根据在半耦合的字典学习算法中全局字典表达的局限性,分析和采用了多字典训练算法及相应的重建方法。提出了基于自适应图像块聚类算法的半耦合稀疏字典学习算法。仿真实验结果显示,新算法重建得到的Butterfly,Cameraman,Foreman,Plants,Hat和Lena等图像的峰值信噪比(PSNR)分别比用基于K-means聚类算法的半耦合稀疏字典学习算法得到的重建图像高出0.18 dB,0.16 dB,0.52 dB,0.21 dB,0.23 dB和0.14 dB。该算法可以得到更好的图像重建效果。     

自适应聚类的全耦合稀疏学习算法

在图像处理领域,基于稀疏表示理论的图像超分辨力算法、高低分辨力字典与稀疏编码之间的映射关系是其中的2个关键环节。由于丰富多样的图像类型,单一字典并不能很好地表示图像。而在稀疏编码之间的映射关系上,严格相等的约束关系也限制了图像重建的效果。针对上述两个方面,采用包容性更强的多个字典与约束条件更为宽松的全耦合稀疏关系进行图像的超分辨力重建。在图像非局部自相似性的基础上,进行多次自适应聚类;挑选出最优的聚类,通过全耦合稀疏学习的图像超分辨力算法,得到多个字典;最后,对输入的低分辨力图像进行分类重建,得到高分辨力图片。实验结果表明,在图像Leaves,Barbara,Room上,本文的聚类算法比原全耦合稀疏学习算法在峰值信噪比(PSNR)上分别提升了0.51 dB,0.21 dB,0.15 dB。     

特征聚类的局部敏感稀疏图像修复

针对图像修复过程中单一的字典迭代时间长、适应性差、修复效果不理想的缺点,提出了一种结合图像特征聚类与字典学习的改进的图像修复方式。首先破损的图像被分割成小块,并产生索引矩阵。然后使用控制核回归权值算法,对其进行图像聚类。通过对图像内在结构与未破损区域信息的挖掘,分割的图像块根据SKRW的相似性进行了分类。之后针对不同类型结构的图像,通过自适应局部明感字典学习的方式,获取每类字典的过完备字典。然后,通过构建自适应局部配适器,提高字典更新的收敛速度与稀疏字典的适应性。因为是通过多个字典匹配不同结构的图像,因此图像的稀疏表示更为准确。各个字典在达到收敛之前不断进行更新,而图像的稀疏因子也会随着改变。在对破损区域进行补丁更换之后,实现了对破损图像的修复。实验结果表明,该算法相较于目前的修复算法,视觉效果和客观评价上更好,且所需的修复时间更短。     

基于Gabor特征的稀疏表示纹理分割研究

稀疏表示和字典学习在图像去噪、图像重建和模式识别等应用上取得了良好的效果,其利用稀疏系数和重构误差来作为模式分类的判别准则。稀疏表示纹理分割方法是将图像分割问题转换为像素点的分类问题。但通常稀疏表示分类方法是基于图像块特征,难以准确表征图像纹理信息。为了解决上述问题,提出基于Gabor特征的稀疏表示纹理分割方法。因为Gabor特征对图像纹理信息的鲁棒性,算法首先从每类纹理中选择一些像素点作为训练样本,计算其不同尺度和方向下的Gabor特征,将其作为初始化字典,通过判别性的字典学习算法(D-KSVD)更新字典,该字典学习算法在KSVD基础上使得字典更具有类别判别能力,最后以待分割图像的每个像素点作为测试样本,计算其Gabor特征。利用OMP算法得到测试样本在字典下的稀疏系数,根据稀疏系数得到类标签,进而对像素点进行分类,完成分割。通过在Brodatz纹理库上的实验结果表明,该方法有效提高了稀疏表示算法对纹理图像分割的正确率。     

基于非局部稀疏编码的超分辨率图像复原

基于压缩感知的超分辨率图像复原方法通常采用局部稀疏编码策略,对每一图像块独立编码,易产生人工的分块效应。针对上述问题,该文提出一种基于非局部稀疏编码的超分辨率图像复原方法。该算法在字典训练和图像编码过程中分别运用图像的非局部自相似先验知识,即利用低分辨率图像的插值图像训练字典,并通过计算相似块局部编码的加权平均,得到每一图像块的非局部稀疏编码。仿真实验表明,所提算法能够获得更优的复原效果,并且对于含噪图像具有较强的鲁棒性。     

局部非负稀疏编码的高光谱目标检测方法研究

基于稀疏编码的高光谱图像处理算法能够挖掘高光谱高维数据空间中潜在的数据相关性,能自然地贴近光谱信号的本质特征。本文提出基于非负稀疏编码的高光谱目标检测算法。与经典稀疏编码模型相比,非负稀疏编码对编码系数进行非负约束,一方面使得线性编码具有明确的物理解释,另一方面增强了系数的可分性与稳健性。算法首先通过双窗口设计构造局部动态字典,然后利用目标和背景在动态字典上编码的稀疏性差异进行阈值分割最后通过统计判决实现目标检测。仿真数据以及真实数据实验结果证明了算法的有效性。      

一种三阶多项式相位信号去噪的字典学习算法

在加性高斯白噪声的影响下,对于三阶多项式相位信号(CPS),经典的字典学习算法,如K-means Singular Value Decomposition(K-SVD), 递归最小二乘字典学习算法(RLS-DLA)和K-means Singular Value Decomposition Denoising (K-SVDD)得到的学习字典,通过稀疏分解,不能有效去除信号的噪声。为此,该文提出了针对CPS去噪的字典学习算法。该算法首先利用RLS-DLA对的字典进行学习;其次采用非线性最小二乘(NLLS)法修改了该算法对字典更新的部分;最后对训练后的字典通过对信号的稀疏表示得到重构信号。对比其它的字典学习算法,该算法的信噪比(SNR)值明显高于其它算法,而均方误差(MSE)显著低于其它算法,具有明显的降噪效果。实验结果表明,采用该算法得到的字典通过稀疏分解,信号的平均信噪比比K-SVD, RLS-DLS和K-SVDD高出9.55 dB, 13.94 dB和9.76 dB。     

基于离线双字典学习算法的图像超分辨率重建研究

为了提高图像超分辨率重建的质量,采用离线双字典学习算法。首先图像块建立字典稀疏模型,确定字典中原子数量;然后使用基于离线字典学习对图像稀疏编码,同时把稀疏编码统一到一个框架中进行优化编码;接着对字典进行分解多个子字典,将图像块中像素点的列向量在子字典展开;最后双字典与超分辨率重构中不同分辨率的异构数据进行同构化,确定控制残差条件,给出了算法实现过程。实验仿真显示本文算法重建效果清楚,峰值信噪比最大,BIQI最小。     

Resolution Enhancement Technology:Integrated Process Solutions using OPC

DUV lithography, using the 248 nm wavelength, is a viable manufacturing option for devices with features at 130 nm and less. Given the low kl value of the lithography, integrated process development is a necessary method for achieving acceptable process latitude. The application of assist features for rule based OPC requires the simultaneous optimization of the mask, illumination optics and the resist.Described in this paper are the details involved in optimizing each of these aspects for line and space imaging.A reference pitch is first chosen to determine how the optics will be set. The ideal sigma setting is determined by a simple geometrically derived expression. The inner and outer machine settings are determined, in turn,with the simulation of a figure of merit. The maximum value of the response surface of this FOM occurs at the optimal sigma settings. Experimental confirmation of this is shown in the paper.Assist features are used to modify the aerial image of the more isolated images on the mask. The effect that the diffraction of the scattering bars (SBs) has on the image intensity distribution is explained. Rules for determining the size and placement of SBs are also given.Resist is optimized for use with off-axis illumination and assist features. A general explanation of the material' s effect is discussed along with the affect on the through-pitch bias. The paper culminates with the showing of the lithographic results from the fully optimized system.     

Cost-effective test solutions for smart card and other integrated flash applications

From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test.     

Theoretical analysis of the relationship between the Brillouin gain coefficient and the strain in the optical-fiber sensors

The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation.     

An improved parallel thinning algorithm with two subiterations

The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.     

Novel fiber-optical interferometer with miniaturized probe for in-hole measurements

Today, micro-system technology and the development of new MEMS （Micro-Electro-Mechanical Systems） are emerging rapidly. In order for this development to become a success in the long run, measurement systems have to ensure product quality. Most often, MEMS have to be tested by means of functionality or destructive tests. One reason for this is that there are no suitable systems or sensing probes available which can be used for the measurement of quasi inaccessible features like small holes or cavities. We present a measurement system that could be used for these kinds of measurements. The system combines a fiber optical, miniaturized sensing probe with low-coherence interferometry, so that absolute distance measurements with nanometer accuracy are possible.     

Study of waveguide coupling efficiency in hybrid silicon lasers

This paper presents a new method to increase the waveguide coupling efficiency in hybrid silicon lasers. We find that the propagation constant of the InGaAsP emitting layer can be equal to that of the Si resonant layer through improving the design size of the InP waveguide. The coupling power achieves 42% of the total power in the hybrid lasers when the thickness of the bonding layer is 100 nm. Our result is very close to 50% of the total power reported by Intel when the thickness of the thin bonding layer is less than 5 nm. Therefore, our invariable coupling power technique is simpler than Intel＇s.     

Teleportation of an arbitrary unknown N-qubit entangled state under the controlling of M controllers

A new quantum protocol to teleport an arbitrary unknown N-qubit entangled state from a sender to a fixed receiver under M controllers(M < N) is proposed. The quantum resources required are M non-maximally entangled Greenberger-Home-Zeilinger (GHZ) state and N-M non-maximally entangled Einstein-Podolsky-Rosen (EPR) pairs. The sender performs N generalized Bell-state measurements on the 2N particles. Controllers take M single-particle measurement along x-axis, and the receiver needs to introduce one auxiliary two-level particle to extract quantum information probabilistically with the fidelity unit if controllers cooperate with it.     

Diode-end-pumped Nd:YVO4/LBO lasers with 4.2W continuous-wave output at 457 nm

A continuous-wave (CW) 457 nm blue laser operating at the power of 4.2 W is demonstrated by using a fiber coupled laser diode module pumped Nd: YVO4 and using LBO as the intra-cavity SHG crystal With the optimization of laser cavity and crystal parameters, the laser operates at a very high efficiency. When the pumping power is about 31 W, the output at 457nm reaches 4.2 W, and the optical to optical conversion efficiency is about 13.5% accordingly. The stability of the out putpower is better than 1.2% for 8 h continuously working.     

A rigorous proof of MIMO channel capacity’s increase with antenna number

It is well known that adding more antennas at the transmitter or at the receiver may offer larger channel capacity in the multiple-input multiple-output（MIMO） communication systems. In this letter, a simple proof is presented for the fact that the channel capacity increases with an increase in the number of receiving antennas. The proof is based on the famous capacity formula of Foschini and Gans with matrix theory.     

Call for Papers

正Wireless Body-area Networks The last decade has witnessed the convergence of three giant worlds:electronics,computer science and telecommunications.The next decade should follow this convergence in most of our activities with the generalization of sensor networks.In particular with the progress in medicine,people live longer and the aging of population will push the development of wireless personal networks