CIGS薄膜太阳能电池缓冲层CdS薄膜的制备研究

目前CdS材料的制备方法有很多种,但是最常用的是化学水浴法。本文研究了浓度、反应溶液pH值、温度、沉积时间对CdS缓冲层薄膜的影响,对CIGS薄膜太阳能电池缓冲层CdS薄膜的制备方法进行了论述。     

太阳能光伏电池及其气相沉积技术研究进展

对太阳能光伏电池的发展现状进行了综述,重点论述了气相沉积技术及其在非晶硅、CIGS等薄膜太阳电池薄膜制备中的应用,并对气相沉积技术及太阳能光伏电池的发展前景进行了展望。     

联氨对化学水浴沉积ZnS薄膜的影响

在A(ZnSO4、SC(NH2)2、NH4OH)和含有联氨的B(ZnSO4、SC(NH2)2、NH4OH、(NH2)2)两种水溶液中采用化学水浴法沉积ZnS薄膜,研究了联氨对薄膜沉积过程和薄膜性质的影响.结果表明,加入少量联氨以后,薄膜沉积速度明显增加.两种溶液沉积的ZnS都为立方相结构,且含有联氨的B溶液沉积的ZnS薄膜表面附着颗粒较少.在含有联氨的B溶液中沉积的ZnS薄膜结晶度和短波区的透过率均高于A溶液沉积的ZnS薄膜.将两种溶液沉积的ZnS薄膜作为电池缓冲层制备铜铟镓硒(CIGS)薄膜太阳电池,加入联氨沉积的ZnS制备的CIGS电池转换效率达到7.77%,比不加联氨沉积的ZnS制备的CIGS电池转换效率提高了1.3%.     

聚酰亚胺衬底CIGS薄膜附着性的改善

为改善聚酰亚胺(PI)衬底Cu(In,Ga)Se2(CIGS)薄膜的附着性,提出在NaF沉积前预先在Mo层上蒸发沉积100nm厚的In-Ga-Se(IGS)薄膜的新掺Na工艺。结果表明:这种IGS-NaF-CIGS式新工艺可显著改善CIGS薄膜的附着,而且CIGS薄膜材料和器件特性没有显著退化;新工艺促进了NaInSe2的生成,减少了In-Se二元相的残余,但也造成薄膜电阻率的升高和电池填充因子的下降,进而导致制备的PI衬底CIGS电池的转换效率由9.8%降至9.0%。综合考虑附着性的改善和器件效率的轻微下降,新工艺利大于弊,有很好的应用前景。     

Cu2ZnSn(S,Se)4薄膜太阳电池研究进展

Cu2ZnSn(S,Se)4(CZTS)材料具有与Cu(In,Ga)Se2(CIGS)材料相似的光学性质和半导体性质,且原料丰富,是CIGS薄膜太阳电池重要的后备材料。有关CZTS薄膜制备工艺的研究和电池器件转换效率提升的研究正成为本领域新的研究开发热点。目前,有实力的薄膜太阳电池研究队伍已经针对CZTS薄膜太阳电池开展了持续的研究,试图通过不同的CZTS吸收层制备方式和优化电池组装工艺过程,进一步提高CZTS薄膜太阳电池的光电转换效率。文章阐述了CZTS材料特性,着重介绍了目前国内外所采用的CZTS薄膜制备方法,详细讨论了各种薄膜沉积技术的优缺点。最后展望了CZTS电池的发展趋势。     

CdS纳米薄膜的水浴法制备与表征

CdS是一种直接能隙半导体，其带隙约为2．42eV，是一种良好的太阳能电池窗口层材料和过渡层材料。化学水浴法沉积CdS薄膜具有工艺简单，成本低廉，成膜均匀、致密以及可大面积生产等优点。本文通过对化学水浴法沉积CdS薄膜的研究，阐述了CdS膜的生成和生长过程及其机理，并不断优化此方法中的各种工艺参数，得到了适合做铜铟镓硒薄膜太阳能电池过渡层的CdS薄膜，并对该薄膜的形貌、结构和性能进行了分析。     

Veeco助CIGS薄膜太阳能电池用户实现高产量

Veeco日前与中国电子科技集团公司第十八研究所、中国化学与物理电源行业协会共同举办了铜铟镓硒(CIGS)薄膜太阳电池技术研讨会,议题涵盖CIGS薄膜太阳能电池的最新生产设备、测试设备及目前中国光伏产业发展现状等。     

台湾光盘业者中环与铼德进入PV市场

据台湾媒体消息,台湾知名光盘片生产商中环与铼德近日进入太阳能电池市场。中环转投资富阳光电发展薄膜太阳能电池事业;铼德则投入CIGS薄膜太阳能电池与太阳能电池模块生产。     

台湾光盘业者中环与铼德进入PV市场

据台湾媒体消息，台湾知名光盘片生产商中环与铼德近日进入太阳能电池市场。中环转投资富阳光电发展薄膜太阳能电池事业；铼德则投入CIGS薄膜太阳能电池与太阳能电池模块生产。     

CIGS将进入快速增长期

a-Si、CdTe和CIGS是目前薄膜呔阳能电池主流技术,而大部分CIGS（铜铟镓硒）电池都采用真空蒸镀方式生产——称为共蒸镀（co-evaporation）,将主要材料铜铟镓与硒加热在真空中沉积于基板,这种工艺要实现大面积且均匀的铜铟镓硒膜具有相当的挑战性。     

Cost-effective test solutions for smart card and other integrated flash applications

From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test.     

An improved parallel thinning algorithm with two subiterations

The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.     

Theoretical analysis of the relationship between the Brillouin gain coefficient and the strain in the optical-fiber sensors

The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation.     

Novel fiber-optical interferometer with miniaturized probe for in-hole measurements

Today, micro-system technology and the development of new MEMS （Micro-Electro-Mechanical Systems） are emerging rapidly. In order for this development to become a success in the long run, measurement systems have to ensure product quality. Most often, MEMS have to be tested by means of functionality or destructive tests. One reason for this is that there are no suitable systems or sensing probes available which can be used for the measurement of quasi inaccessible features like small holes or cavities. We present a measurement system that could be used for these kinds of measurements. The system combines a fiber optical, miniaturized sensing probe with low-coherence interferometry, so that absolute distance measurements with nanometer accuracy are possible.     

Teleportation of an arbitrary unknown N-qubit entangled state under the controlling of M controllers

A new quantum protocol to teleport an arbitrary unknown N-qubit entangled state from a sender to a fixed receiver under M controllers(M < N) is proposed. The quantum resources required are M non-maximally entangled Greenberger-Home-Zeilinger (GHZ) state and N-M non-maximally entangled Einstein-Podolsky-Rosen (EPR) pairs. The sender performs N generalized Bell-state measurements on the 2N particles. Controllers take M single-particle measurement along x-axis, and the receiver needs to introduce one auxiliary two-level particle to extract quantum information probabilistically with the fidelity unit if controllers cooperate with it.     

Diode-end-pumped Nd:YVO4/LBO lasers with 4.2W continuous-wave output at 457 nm

A continuous-wave (CW) 457 nm blue laser operating at the power of 4.2 W is demonstrated by using a fiber coupled laser diode module pumped Nd: YVO4 and using LBO as the intra-cavity SHG crystal With the optimization of laser cavity and crystal parameters, the laser operates at a very high efficiency. When the pumping power is about 31 W, the output at 457nm reaches 4.2 W, and the optical to optical conversion efficiency is about 13.5% accordingly. The stability of the out putpower is better than 1.2% for 8 h continuously working.     

Call for Papers

正Wireless Body-area Networks The last decade has witnessed the convergence of three giant worlds:electronics,computer science and telecommunications.The next decade should follow this convergence in most of our activities with the generalization of sensor networks.In particular with the progress in medicine,people live longer and the aging of population will push the development of wireless personal networks     

Call for Papers—Feature Topic,Vol.12,No.7,2015

正Information Centric Networking Information-Centric Networking(ICN) is an emerging direction in Future Internet architecture research,gaining significant tractions among academia and industry.Aiming to replace the conventional host-to-host communication model by a data-centric model,ICN treats data content as the first     

JOURNAL OF ELECTRONICS(CHINA)

正~~     

NEXT GENERATION WIRELESS NETWORKS–ESPECIALLY THE USE OF MILLI-MICROWAVE BANDS

The global bandwidth shortage of wireless communications has motivated the exploration of the naillimeter wave （ram-wave） frequency spectrum for the next generation wireless communications. Recent advances in RF CMOS technology and high speed baseband signal processing technologies have enabled tile extensive research and development of turn-wave wireless communications. The multi gigabit per second data rate of ram-wave system will lead to applications in many important scenarios, such as WPAN, WLAN,back-haul for cellular system. And the frequency bands include 28 GHz, 38 GHz, 45GHz, 60GHz, E-BAND and even beyond 100 GHz. The propagation and the imitation of the RF circuits design in these frequency bands make the directional antennas be inevitable for mm-wave communications.