Neodymium(III)-PVC membrane sensor based on a new four dentate ionophore

A new selective Nd(III) sensor has been made by using N,N′-bis(quinoline-2-carboxamido)-4,5-dimethylbenzene (H₂L₄) as a suitable ionophore. The sensor exhibits Nernstian response to Nd(III) ions in the concentration range of 5.0 × 10^− 6 to 1.0 × 10^− 2 M. It displays a Nernstian slope of 19.5 ± 0.4 mV/decade in the pH range of 2.9-9.2. The proposed sensor also exhibits a fast response time of < l0 s. The detection limit of the proposed sensor is 4.8 × 10^− 6 M, and it can be used over a period of 10 weeks without significant changes in its response. Furthermore, the electrode showed high selectivity toward Nd(III) ion respect to all other lanthanide ions tested. The practical utility of the sensor was demonstrated by using it as an indicator electrode in the potentiometric determination of Nd(III) ions in certified reference material and spiked water samples.     

Construction of Tm3+-PVC membrane sensor based on 1-(2-thiazolylazo)-2-naphthol as sensing material

In this study, a new thulium(III) membrane sensor was constructed. The proposed membrane sensor was fabricated based on a membrane containing 2% sodium tetraphenyl borate (NaTPB) as an anionic additive, 65% benzyl acetate (BA) as solvent mediator, 3% 1-(2-thiazolylazo)-2-naphthol (TN) as ionophore, and 30% poly(vinyl chloride) (PVC). The proposed Tm³⁺ electrode exhibits a Nernstian response of 19.5 ± 0.2 mV per decade of thulium concentration, and has a lower detection limit of 8.7 × 10^? 7 mol L^? 1. The linear range of the sensors was 1.0 × 10^? 6 to 1.0 × 10^? 2 mol L^? 1. It works well in the pH range of 3.2–9.5. Moreover, the recommended selective sensor revealed a comparatively satisfactory selectivity regarding most of the alkali, alkaline earth, some transition and heavy metal ions. The membrane sensor was applied to the determination of fluoride ions in mouth wash samples.     

Europium (III) PVC membrane sensor based on N-pyridine-2-carboxamido-8-aminoquinoline as a sensing material

Conductometric study in acetonitrile solution shows the selectivity of PCQ toward europium ion. Therefore, a new europium PVC membrane electrode was prepared based on N-pyridine-2-carboxamido-8-aminoquinoline (PCQ) as an ion carrier. The electrode has a wide concentration range from 1.0 × 10^− 2 and 1.0 × 10^− 6 mol L^− 1, Nernstian slope of 19.8 ± 0.3 mV per decade and a detection limit of 6.4 × 10^− 7 mol L^− 1. The potentiometric response is pH independent in the range of 2.4-7.4. The proposed sensor has a relatively fast response time less than 10 s and it can be used for at least 2 months without any considerable divergence in its potentials. The proposed electrode revealed good selectivity toward europium ion in comparison with variety of other metal ions. The practical utility of the electrodes has been demonstrated by their use as indicator electrodes in the potentiometric titration of Eu^3 + ions with EDTA and for determination of Eu^3 + ion concentration in mixtures of two and three different ions.     

A Ho(III) potentiometric polymeric membrane sensor based on a new four dentate neutral ion carrier

In this research, we report a new Ho^3 +-PVC membrane electrode based on N-(4,5-dimethyl-2-(picolinamido)phenyl)picolinamide (H₂Me₂bpb) as a suitable ion carrier. Poly vinylchloride (PVC)-based membrane composed of H₂Me₂bpb with oleic acid (OA) as anionic additives, and o-nitrophenyloctyl ether (NPOE) as plasticized solvent mediator. The sensor exhibits a Nernstian slope of 20.1 ± 0.2 mV decade^? 1 over the concentration range of 1.0 × 10^? 6 to 1.0 × 1^? 2 mol L^? 1, and a detection limit of 5.0 × 10^? 7 mol L^? 1 of Ho^3 + ions. The potentiometric response of the sensor is independent of the solution pH in the range of 3.5–9.4. It has a very short response time, in the whole concentration range (< 10 s), and can be used for at least eight weeks. The proposed electrode shows a good selectivity towards Ho^3 + ions over a wide variety of cations, including alkali, alkaline earth, transition and heavy metal ions. To assess its analytical applicability the proposed Ho^3 + sensor was successfully applied as an indicator electrode in the titration of Ho^3 + ion solutions in certified reference materials, alloy samples and for the determination of the fluoride ion in two mouthwash preparations.     

Fabrication of an iron(III) PVC-membrane sensor based on bis-benzilthiocarbohydrazide as a selective sensing material

The construction, performance characteristics, and application of a novel iron(III) membrane sensor based on a new bis-benzilthiocarbohydrazide (BBTC) are reported in this paper. The sensor is prepared by incorporating of BBTC, nitrobenzene (NB), and sodium tetraphenyl borate (NaTPB) into a plasticized poly(vinyl chloride) membrane. The electrode reveals a Nernstian behavior over a wide iron ion concentration range (1.0 × 10^? 2–1.0 × 10^? 7 mol L^? 1), and relatively low detection limit (8.6 × 10^? 8 mol L^? 1). The potentiometric response is independent on the pH of the solution in the range of 1.6–4.3. The electrode shows a very short response time (< 10 s). The proposed electrode can be used for at least nine weeks without any considerable divergence in potentials. It exhibits very good selectivity relative to a wide variety of alkali, alkaline earth, transition and heavy metal ions. In fact, the selectivity of the proposed sensor shows great improvements compared to the previously reported electrodes for the iron ion. Also, the sensors accuracy was investigated in two ways: (i) with the potentiometric titration of a Fe(III) solution with EDTA and (ii) with the Fe(III) monitoring in river and wastewater samples.     

A new three-dimensional open-framework iron(III) phosphate, [C2N2H10][Fe2(HPO4)4]

A new open-framework iron(III) phosphate, I, [C₂N₂H₁₀][Fe₂(HPO₄)₄] has been hydrothermally synthesized in the presence of ethylenediamine (en). The structure is built up from the vertex linkages between the FeO₆ octahedra and the PO₄ tetrahedra, strictly alternating, forming the three-dimensional architecture. The linkages between the FeO₆ and PO₄ polyhedra gives rise to ladder-like edge-shared chains, which are connected variously forming two types of channels. The di-protonated en molecules occupy these channels. Crystal data for I, [C₂N₂H₁₀][Fe₂P₄O₁₆]: a=9.341(1), b=8.892(1), c=9.480(1) Å, β=117.6(1)°, V=698.1(1) ų, space group P2/n (No. 13), Z=2, M=557.7, D_calc=2.65 g cm⁻³, MoKα (λ=0.71073 Å), R₁=0.03, wR₂=0.08 and S=1.10. Magnetic susceptibility studies indicate a predominantly antiferromagnetic interaction with T_N=30 K.     

Di-tert-butylazodicarboxylate based PVC membrane sensor for Fe(III) ion measurement in pharmaceutical formulation

Preliminary solution study shows the selectivity of di-tert-butylazodicarboxylate (TBADC) toward Fe(III) ions. Due to this selectivity, it was applied as an ionophore for construction of a Fe(III) sensor. The proposed sensor exhibits a wide linear response range with a Nerstian slope of 19.4 ± 0.4 mV decade^− 1 and detection limit of 4.8 × 10^− 8 mol L^− 1. The sensor response is pH independent in the range of 2.3-3.4 and has a fast response time of < 10 s. It also shows very good selectivity to Fe(III) ion over many mono-,di- and trivalent transition and heavy metal ions. The life time of the electrode was at least 10 weeks. The application of the TBADC-based sensor to analysis of Fe(III) ion in a pharmaceutical formulation, and also to the monitoring of Fe(III) ion in mixtures of two, three and four different ions showed satisfactory results.     

Adsorption behavior of Cr(VI) on modified natural zeolite by a new bolaform N,N,N,N',N',N'-hexamethyl-1,9-nonanediammonium dibromide reagent

The demand for effective adsorbents is to increase in response to the widespread recognition of the deleterious health effects of Cr(VI)-oxyanions exposure through drinking water. In this study, Cr(VI)-oxyanions uptake from aqueous solutions by a new bolaform N,N,N,N',N',N'-hexamethyl-1,9-nonanediammonium dibromide reagent-modified natural zeolitic materials from Zahedan, Iran, was investigated using batch technique. Spectrophotometry method was used for Cr determination. The Cr(VI)-solution concentration varied between 2 and 104 mg L(-1). It was shown that the Cr(VI) uptake strongly depended on pH. The maximum removal of Cr(VI) occurred in acidic media at pH<1.5. The amounts of Cr(VI) adsorbed increased with increase in dose of both adsorbents and their contact time. Based on results an adsorption mechanism has been suggested. The adsorption data for modified zeolite using the amine was consistent with Langmuir isotherm equation and the equilibrium data was analyzed using the Langmuir isotherm.     

A novel technique to prepare ultrafine Fe2O3 via hydrated iron(III) nitrate

Abstracts are not published in this journal This revised version was published online in November 2006 with corrections to the Cover Date.     

Heptadentate Schiff-base based PVC membrane sensor for Fe(III) ion determination in water samples

Tests performed using heptadentate Schiff's base ((tris(3-(thiophenal)propyl)amine (TTA)) toward Fe(III) ions indicated that it could be used as an Fe(III) selective ionophore to be used in a plasticized polymeric membrane sensor. The resulting sensors were found to produce a linear response range of five orders of magnitude with a slope of 19.8 ± 0.3 mV decade^− 1 with a detection limit is 8.3 × 10^− 9 mol L^− 1. The sensor could be used in a pH window of 2.4-4.3 and the response time of the sensor was below 10 s, in addition to its very good Fe(III) selectivity over many mono-,di- and trivalent transition and heavy metal ions. The life time of the electrode was found to be at least 10 weeks.     

A novel non-enzymatic glucose sensor based on nickel (II) oxide electrospun nanofibers

A new enzymeless glucose sensor has been fabricated via electrospinning technology and subsequent calcination. The morphology and structure of the as-prepared nanofibers have been characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray diffraction (XRD). The electrocatalytic oxidation of glucose in alkaline medium at nickel oxide modified glassy carbon electrodes has been investigated. The modified electrodes offer excellent electrocatalytic activity toward the glucose oxidation at low positive potential (0.3 V). Glucose has been determined chronoamperometrically at the surface of NiO nanofibers modified electrode in 0.5 mM NaOH. Under the optimized condition, the calibration curve is linear in the concentration range of 2 x 10(-3) mM - 1 mM, and 1 mM - 9.5 mM. The detection limit (signal-to-noise 3) and response time are 3.394 x 10(-6) M and 2 s, respectively. The NiO electrospun nanofibers is easy to prepare and feasible in economy. The modified electrode is steady and can be used repeatedly, so it is reasonable to expect its broad use in non-enzymatic glucose sensor.     

Degradation and drug release properties of poly-alpha,beta-[N-(2-hydroxyethyl)-L-aspartamide]-g-poly(2,2-dimethyltrimethylene carbonate)

A series of biodegradable amphiphilic graft copolymers with poly-α,β-[N-(2-hydroxyethyl)-l-aspartamide] (PHEA) as the backbone and poly(2,2-dimethyltrimethylene carbonate) (PDTC) segments with different lengths as the grafted branches were synthesized and characterized. The in vitro degradation of the obtained PHEA-g-PDTC copolymers was studied. With particular branch lengths, PHEA-g-PDTC can form self-assembling micelles in an aqueous solution. Transmission electron microscopy (TEM) images demonstrated that the micelles were regularly spherical in shape. The particle size and distribution of the micelles were measured. Nanoparticle drug delivery systems were prepared by the direct dissolution method. The in vitro release behaviors of two drugs, prednisone acetate and tegafur, with different water solubilities were investigated.     

A novel potentiometric hydrogen peroxide sensor based on pKa changes of vinylphenylboronic acid membranes

A potentiometric hydrogen peroxide (H₂O₂) sensing scheme was developed using arylboronic acid as the electrode modifier. It is well-known that both aliphatic and aryl boronic acid undergo electrophilic displacement reaction with H₂O₂. This reaction involves replacement of boronic acid by the hydroxyl group of peroxide resulting in a change in pK_a value that can be exploited for sensing of H₂O₂. Vinylphenylboronic acid (VPBA) ink was prepared using Nafion as the binder and it was drop cast on an electrode surface. Morphology of the modified electrode was analysed using scanning electron microscopy (SEM). The present modifier exhibited a linear relationship between the difference in electrode potential (?Ep) vs. [H₂O₂] with a Nernstian slope of 26 ± 2 mV in the concentration range of 10^? 1–10^? 5 M. Application of the VPBA modified electrode for hydrogen peroxide sensing was studied in an industrial dye-bleach effluent.     

Poly(2-hydroxyethyl methacrylate-co-dodecyl methacrylate-co-acrylic acid): synthesis,physico-chemical characterisation and nafcillin carrier

In the present study polymeric microbeads of poly(2-hydroxyethyl methacrylate-co-dodecyl methacrylate-co-acrylic acid) or p(HEMA-co-dDMA-co-AA) were synthesised and characterized through FT-IR and scanning electron microscopy (SEM); their swelling behavior against saline solution was explored and their in vitro cytotoxicity was evaluated. Further, in order to elucidate kinetic aspects regarding the ternary system p(HEMA-co-dDMA-co-AA), a mathematical model of the reactivity ratios of the comonomers in the terpolymer has been conceived and analyzed. An intensified tendency of AA units accumulation in the copolymer has been noticed, in spite of HEMA units, while dDMA conserves in the copolymer the fraction from the feed. Three compositions have been selected for nafcillin-loading and their in vitro release capacity was evaluated. The compositions of 80:10:10 and 75:10:15 M ratios appear suitable for further in vivo testing, in order to be used as drug delivery systems in the treatment of different osseous diseases.     

2D-titanium carbide (MXene) based selective electrochemical sensor for simultaneous detection of ascorbic acid,dopamine and uric acid

Two-dimensional (2D) titanium carbide (MXene) nanosheets exhibited excellent conductivity,flexibility,high volumetric capacity,hydrophilic surface,thermal stability,etc.So,it has been exploited in various applications.Herein,we report synthesis of mixed phase 2D MXene as a catalytic material for simultaneous detection of important biomolecules such as ascorbic acid (AA),dopamine (DA) and uric acid (UA),Crystalline structure,surface morphology and elemental composition of mixed phase titanium carbide (Ti-C-Tx) MXene (Tx =-F,-OH,or-O) nanosheets were confirmed by X-ray diffraction (XRD),Raman spectroscopy,high-resolution transmission electron microscopy (HR-TEM),high-resolution scanning electron microscopy (HR-SEM) and Energy-dispersive X-ray spectroscopy (EDS) mapping analysis.Furthermore,Ti-C-Tx modified glassy carbon electrode (GCE) was prepared and its electrochemical properties are studied by cyclic voltammetry (CV) and differential pulse voltammetry (DPV).It was found that Ti-C-Tx modified GCE (Ti-C-Tx/GCE) showed excellent electrocatalytic activity and separated oxidation peaks of important biomolecules such as AA (at 0.01 V),DA (at 0.21 V) and UA (at 0.33 V).Also,Ti-C-Tx/GCE sensor is enabled their simultaneous detection in physiological pH from 100 to 1000 μM for AA,0.5-50 μM for DA and 0.5-4 μM & 100-1500 μM for UA.The limit ofdetection's (LOD) was estimated as 4.6 μM,0.06 μM and 0.075 μM for AA,DA and UA,respectively.Moreover,real sample analysis indicated that spiked AA,DA and UA can be determined accurately by Ti-C-Tx/GCE with the recovery ratio in the range between 100.5％-103％ in human urine samples.The proposed Ti-C-Tx modified electrode exhibited good stability,selectivity and reproducibility as an electrochemical sensor for the detection ofAA,DA and UA molecules.     

纳米固体超强酸 SO42- /TiO2的氧敏特性研究

采用溶胶-凝胶法制备了TiO2,再用浸渍法制备纳米固体超强酸SO42-/TiO2,用XRD、TEM、IR、XPS和比表面测量等方法进行表征。结果表明纳米固体超强酸SO42-/TiO2的粒径(≤30nm)比TiO2小,并且具有很大的比表面积,Ti4+离子与SO42-的结合形式为无机双齿螯合型结构,酸强度用乙酸乙脂合成模型实验测定,确定纳米SO42-/TiO2为超强酸(SO42-/TiO2脂产率≥H2SO4脂产率)。利用固体超强酸SO42-/TiO2和纯TiO2纳米粉体分别制作成厚膜型气敏元件,固体超强酸SO42-/TiO2氧敏元件的灵敏度和工作温度等技术指标均优于纯TiO2,还进一步讨论了其氧敏特性和结构之间的关系。     

以N，N-（2-羟乙基）-2-氨基乙磺酸钠为亲水扩链剂的水性聚氨酯的制备及性能

制备了以N,N-（2-羟乙基）-2-氨基乙磺酸钠（BES—Na）为亲水扩链剂的磺酸型水性聚氨酯,采用FT—IR、DSC对水性聚氨酯的结构进行表征,并研究了BES—Na含量和NCO／OH值对水性聚氨酯乳液和薄膜性能的影响。研究表明：随着BES—Na含量的增加,乳液粒径分布区间变窄,平均粒径由237．3nm减小至61．2nm,薄膜的力学性能有较大提高,拉伸强度由16．07MPa增至24．67MPa,断裂伸长率由478．73％增至724．07％,硬度增大,吸水率由6．82％增至13．03％;随着NCO／OH值的增大,乳液粒径分布变宽,平均粒径由77．6nm增至335．7nm,薄膜拉伸强度由11．46     

Surface modification of hydrogels based on poly(2-hydroxyethyl methacrylate) with extracellular matrix proteins

Infrared attenuated total reflection spectroscopy was used for in situ observation of the deposition of collagen I on poly(2-hydroxyethyl methacrylate-co-methacrylic acid, 2.9%) hydrogels and subsequent attachment of laminin or fibronectin on the collagen surface. While there was no adsorption of collagen dissolved in an acid solution on the hydrogel surface, it deposited on the surface at pH 6.5. The collagen layers with attached laminin or fibronectin were stable on hydrogel surface in physiological solution. The modification with collagen and particularly with collagen and laminin or fibronectin allowed the adhesion and growth of mesenchymal stromal cells and astrocytes on the hydrogel surface.     

Adsorption of a blood protein on to hydrophilic sponges based on poly(2-hydroxyethyl methacrylate)

Spongy materials of poly(2-hydroxyethyl methacrylate) were synthesized and the adsorption of bovine serum albumin was carried out onto their surfaces. The sponges were characterized by IR spectral analysis, and water sorption property. It was noticed that the chemical architecture of the sponge has a pronounced impact on both the water sorption capacity and adsorption affinity of the sponge surfaces. The adsorption was also studied kinetically and the effect of pH was also investigated. The synthesized sponges were evaluated for antithrombogenic property by performing blood-clot formation tests.     

PVC membrane potentiometric sensor based on 5-pyridino-2,8-dithia[9](2,9)-1,10-phenanthroline-phane for selective determination of neodymium(III)

Spectrofluorometric studies on the binding properties of 5-pyridino-2,8-dithia[9](2,9)-1,10-phenanthrolinephane (L) toward La3+, Sm3+, Gd3+, Yb3+, and Nd3+ in methanol solution revealed the occurrence of both 1:1 and 2:1 (ligand/metal) complexation with a stability order of Nd3+ > Yb3+ > Gd3+ > Sm3+ > La3+. Consequently, L was used as a suitable neutral ionophore for the preparation of a novel polymeric membrane-selective electrode for Nd3+ ion. The electrode exhibited a Nernstian response over a wide concentration range (1.0 x 10(-6)-1.0 x 10(-2) M) with a low limit of detection of 7.9 x 10(-7) M. The electrode possesses a fast response time of <5 s and can be used for at least 9 weeks without observing any considerable deviation. The proposed electrode revealed a very good selectivity for Nd3+ over a wide variety of alkali, alkaline earth, transition, and heavy metal ions, including members of the lanthanide family other than Nd3+. The potentiometric response of the electrode is independent of the pH of test solution in the pH range 4.0-6.5. The proposed electrode was successfully applied to the recovery of Nd3+ ion from tap water samples and, also, as an indicator electrode, in potentiometric titration of neodymium(III) ions.