一种低复杂度立体视频错误隐藏新方法

针对立体视频流传输中右视 点整帧丢失,提出 了一种低复杂度的错误隐藏算法。首先,为了高效地感知立体视频的时域质量和视点间质量 ,定义了时域相似尺度(TSM)、 视间相似尺度(ISM)的概念;将前一时刻右视点图像进行时域和视点间匹配,分别求取 其以像素为单位的TSM和 ISM映射图;然后,计算前一时刻右视点图像当前宏块的TSM和ISM值,通过比较得 到当前宏块的预测模式;最后,根据视频序列的时域一致性,将前一时刻右视点图像宏块 的预测模式作为丢失图像宏 块的预测模式,从而使用运动补偿预测(MCP)或者视差补偿预测(DCP )的方法恢复丢失信息。研究结果表明,与已有错误隐藏 算法相比,本文算法获得更好主客观视觉效果;同时与基于图像结构相似度(SSIM)的错误隐藏算法相比,在保持主观视觉质量情况下,错误隐藏时间节省20%左右。     

A low-complexity intracardiac electrogram compression algorithm

Implantable cardioverter defibrillators (ICD's) detect, diagnose and treat the potentially fatal heart arrhythmias known as bradycardia, ventricular tachycardia (VT), and ventricular fibrillation (VF) in cases where these arrhythmias are resistant to surgical and drug-based treatments by direct sensing and electrical stimulation of the heart muscle. Since the ICD is implanted, power consumption, reliability, and size are severe design constraints. This paper targets the problems associated with increasing the signal recording capabilities of an ICD. A data-compression algorithm is described which has been optimized for low power consumption and high reliability implementation. Reliance on a patient's morphology or that of a population of patients is avoided by adapting to the intracardiac electrogram (ICEG) amplitude and phase variations and by using adaptive scalar quantization. The algorithm is compared to alternative compression algorithms which are also patient independent using a subset of VT arrhythmias from a data base of 146 patients. At low distortion the algorithm is closest to the Shannon lower bound achieving an average of 3.5 b/sample at 5% root mean square distortion for a 250-Hz sample rate. At higher distortion vector quantization and Karhunen-Loeve Transform approaches are superior but at the cost of considerable additional computational complexity     

Shadow generation from stereo images

A novel approach to generating object shadows using two dimensional (2D) information is presented. Existing approaches to shadow generation are generally based on 3D geometry. The proposed method is based on deriving accurate shadows of a 3D object using only stereo images of the object taken from two different viewpoints. The approach can be extended easily to solve more general problems which involve multiple objects as well as multiple planar surfaces on which object shadows are to be cast     

立体图像序列的压缩方法

首先介绍了立体视觉的基本原理，然后对立体图像的压缩方法分四类进行了综述。对其中用于立体图像序列的两种主要方法：基于“块”匹配的立体图像压缩方法和基于物体的立体图像压缩方法进行了深入探讨。通过对已有成果进行总结和分类，剖析了两种方法的优、缺点，并提出了一些还需要深入研究的问题，如：残差图像编码、遮挡检测、更精确的场景分割等。     

User assisted disparity remapping for stereo images

This study concentrates on user assisted disparity remapping for stereo image footage, i.e. the disparity of an object of interest is altered while leaving the remaining scene unattended. This application is useful in the sense that it provides a method for emphasizing/de-emphasizing an object on the scene by adjusting its depth with respect to the camera. The proposed technique can also be used as a post-processing step for retargeting stereoscopic footage on different display sizes and resolutions. The proposed technique involves an MRF-based energy minimization step for interactive stereo image segmentation, for which user assistance on only one of the stereo pairs is required for determining the location of stereo object pair. A key contribution of the proposed study is elimination of dense disparity estimation step from the pipeline. This step is realized through a sparse feature matching technique between the stereo pairs. Moreover, by the help of the proposed technique, novel disparity adjusted views are synthesized using the produced stereo object segments and background information for the images. Qualitative and quantitative evaluation of the generated segments and the disparity adjusted images prove the functionality and superiority of the proposed technique.     

立体图像压缩研究进展

简要回顾了立体图像压缩的研究进展。阐述了人类视觉系统与立体图像压缩密切相关的立体视觉特性，并且指出了立体图像压缩编解码器结构在有无失真情况下的最优性。简要描述了静止立体图像和立体图像序列压缩的研究进展。对将来的研究方向提出了一点建议。     

一种用于主动式毫米波图像的低复杂度隐匿物品检测方法

主动式毫米波成像(AMWI)技术是检测隐藏在衣服下的危险物体的有效方法.但AMWI获取的图像通常很模糊,而且一些隐匿物体的尺寸较小,因此隐匿物品的自动检测和定位仍然是一个具有挑战性的问题.姚家雄等[1]首先使用卷积神经网络(CNNs)结合穷举滑动窗口方法来检测隐藏物体.做了两点改进:(1)使用上下文(背景)信息抑制干扰,(2)使用两步搜索方法代替穷举搜索来降低计算复杂度.首先在垂直方向上使用一个CNN来过滤干扰,得到隐藏物体的垂直位置,然后用另一个CNN来确定水平位置.为了充分利用上下文信息,使用IoG(交集和真值的比)代替IoU(交并比)来定义训练和测试过程中的正负样本.实验结果表明,该方法将计算时间减小到约30%,同时实现更好的检测性能.     

A low-complexity image compression approach with single spatial prediction mode and transform

The well-known low-complexity JPEG and the newer JPEG-XR systems are based on block-based transform and simple transform-domain coefficient prediction algorithms. Higher complexity image compression algorithms, obtainable from intra-frame coding tools of video coders H.264 or HEVC, are based on multiple block-based spatial-domain prediction modes and transforms. This paper explores an alternative low-complexity image compression approach based on a single spatial-domain prediction mode and transform, which are designed based on a global image model. In our experiments, the proposed single-mode approach uses an average 20.5 % lower bit-rate than a standard low-complexity single-mode image coder that uses only conventional DC spatial prediction and 2-D DCT. It also does not suffer from blocking effects at low bit-rates.     

Registration of stereo and temporal images of the retina

The registration of retinal images is required to facilitate the study of the optic nerve head and the retina. The method we propose combines the use of mutual information as the similarity measure and simulated annealing as the search technique. It is robust toward large transformations between the images and significant changes in light intensity. By using a pyramid sampling approach combined with simulated reannealing we find that registration can be achieved to predetermined precision, subject to choice of interpolation and the constraint of time. The algorithm was tested on 49 pairs of stereo images and 48 pairs of temporal images with success.     

DCT transform coding of stereo images for multimedia applications

One form of multimedia finding increasing utility in factory automation is stereo imaging. Its uses include remote operation, telepresence, and object positioning. Stereo imaging, with doubled frames, requires high data-rate collection and transmission. Image compression techniques can be utilized to reduce the transmission bandwidth and/or storage space requirements of the stereo pair. This paper develops image compression techniques specific to stereo imaging and compares the performance with nonstereo methods. Disparity compensated residual image coding exploits the redundancy between the two images in a stereo pair. Stereo residuals possess special features that can be exploited within a discrete cosine transform (DCT) image coding framework. Use of these features results in several decibels of performance enhancement across a range of scene types. This approach provides its best performance below 0.75 b/pixel bitrate for 8-b grayscale imagery and below 2 b/pixel for 24-b color imagery     

Lossless compression of continuous-tone images

In this paper, we survey some of the recent advances in lossless compression of continuous-tone images. The modeling paradigms underlying the state-of-the-art algorithms, and the principles guiding their design, are discussed in a unified manner. The algorithms are described and experimentally compared     

Wavelet-based compression of M-FISH images

Multiplex fluorescence in situ hybridization (M-FISH) is a recently developed technology that enables multi-color chromosome karyotyping for molecular cytogenetic analysis. Each M-FISH image set consists of a number of aligned images of the same chromosome specimen captured at different optical wavelength. This paper presents embedded M-FISH image coding (EMIC), where the foreground objects/chromosomes and the background objects/images are coded separately. We first apply critically sampled integer wavelet transforms to both the foreground and the background. We then use object-based bit-plane coding to compress each object and generate separate embedded bitstreams that allow continuous lossy-to-lossless compression of the foreground and the background. For efficient arithmetic coding of bit planes, we propose a method of designing an optimal context model that specifically exploits the statistical characteristics of M-FISH images in the wavelet domain. Our experiments show that EMIC achieves nearly twice as much compression as Lempel-Ziv-Welch coding. EMIC also performs much better than JPEG-LS and JPEG-2000 for lossless coding. The lossy performance of EMIC is significantly better than that of coding each M-FISH image with JPEG-2000.     

Lossy compression of noisy images

Noise degrades the performance of any image compression algorithm. This paper studies the effect of noise on lossy image compression. The effect of Gaussian, Poisson, and film-grain noise on compression is studied. To reduce the effect of the noise on compression, the distortion is measured with respect to the original image not to the input of the coder. Results of noisy source coding are then used to design the optimal coder. In the minimum-mean-square-error (MMSE) sense, this is equivalent to an MMSE estimator followed by an MMSE coder. The coders for the Poisson noise and the film-grain noise cases are derived and their performance is studied. The effect of this preprocessing step is studied using standard coders, e.g., JPEG, also. As is demonstrated, higher quality is achieved at lower bit rates.     

Lossless compression of AVIRIS images

Adaptive DPCM methods using linear prediction are described for the lossless compression of hyperspectral (224-band) images recorded by the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS). The methods have two stages-predictive decorrelation (which produces residuals) and residual encoding. Good predictors are described, whose performance closely approaches limits imposed by sensor noise. It is imperative that these predictors make use of the high spectral correlations between bands. The residuals are encoded using variable-length coding (VLC) methods, and compression is improved by using eight codebooks whose design depends on the sensor's noise characteristics. Rice (1979) coding has also been evaluated; it loses 0.02-0.05 b/pixel compression compared with better VLC methods but is much simpler and faster. Results for compressing ten AVIRIS images are reported.     

Reversible compression of MR images

Methods for reversible coding can be classified according to the organization of the source model as either static, semi-adaptive, or adaptive. Magnetic resonance (MR) images have different statistical characteristics in the foreground and the background and separation is thus a promising path for reversible MR image compression. A new reversible compression method, based on static source models for foreground and background separately, is presented. The method is nonuniversal and uses contextual information to exploit the fact that entropy and bit rate are reduced by increasing the statistical order of the model. This paper establishes a realistic level of expectation regarding the bit rate in reversible MR image compression, in general, and the bit rate using static modeling, in particular. The experimental results show that compression using the new method can give bit rates comparable to the best existing reversible methods.     

Sharpness enhancement of stereo images using binocular just-noticeable difference

In this paper, we propose a new sharpness enhancement algorithm for stereo images. Although the stereo image and its applications are becoming increasingly prevalent, there has been very limited research on specialized image enhancement solutions for stereo images. Recently, a binocular just-noticeable-difference (BJND) model that describes the sensitivity of the human visual system to luminance changes in stereo images has been presented. We introduce a novel application of the BJND model for the sharpness enhancement of stereo images. To this end, an overenhancement problem in the sharpness enhancement of stereo images is newly addressed, and an efficient solution for reducing the overenhancement is proposed. The solution is found within an optimization framework with additional constraint terms to suppress the unnecessary increase in luminance values. In addition, the reliability of the BJND model is taken into account by estimating the accuracy of stereo matching. Experimental results demonstrate that the proposed algorithm can provide sharpness-enhanced stereo images without producing excessive distortion.     

Object-based stereo video compression using fractals and shape-adaptive DCT

Based on the classical fractal video compression method, an improved object-based stereo video compression scheme with Shape-Adaptive DCT is proposed in this paper. Firstly, we use more effective macroblock partition scheme instead of classical quadtree partition scheme; thus reducing the block searching strategy. The stereo fractal video coding is proposed which matches the macroblock with two reference frames in left and right view results in increasing compression ratio and reducing bit rate when transmitting compressed stereo data. The stereo codec combines the Motion Compensation Prediction (MCP) and Disparity Compensation Prediction (DCP). Fractal coding is adopted and each object is encoded independently by a prior video segmentation alpha plane, which is defined exactly as in MPEG-4. The testing results with the nature monocular and stereo video sequences provide promising performances at low bit rate coding. We believe it will be a powerful and efficient technique for the object-based monocular and stereo video sequences coding.     

现代图像压缩编码技术

阐述了图像压缩编码的基本原理，系统地介绍了几种比较有应用前景的现代图像编码方法及其特点，最后对图像编码进行了总结和展望，指出从图像模型的角度研究图像编码将成为新一代图像编码的研究方向。     

A hybrid scheme for low bit-rate coding of stereo images

We propose a hybrid scheme to implement an object driven, block based algorithm to achieve low bit-rate compression of stereo image pairs. The algorithm effectively combines the simplicity and adaptability of the existing block based stereo image compression techniques with an edge/contour based object extraction technique to determine appropriate compression strategy for various areas of the right image. Unlike the existing object-based coding such as MPEG-4 developed in the video compression community, the proposed scheme does not require any additional shape coding. Instead, the arbitrary shape is reconstructed by the matching object inside the left frame, which has been encoded by standard JPEG algorithm and hence made available at the decoding end for those shapes in right frames. Yet the shape reconstruction for right objects incurs no distortion due to the unique correlation between left and right frames inside stereo image pairs and the nature of the proposed hybrid scheme. Extensive experiments carried out support that significant improvements of up to 20% in compression ratios are achieved by the proposed algorithm in comparison with the existing block-based technique, while the reconstructed image quality is maintained at a competitive level in terms of both PSNR values and visual inspections.     

嫦娥一号卫星CCD立体相机影像超分辨率重建算法

针对嫦娥一号卫星CCD立体相机空间分辨率不足的问题,运用最大后验概率估计法(MAP)实现了月表影像的超分辨率重建。介绍了嫦娥一号卫星CCD立体相机的成像模型,分析了图像获取过程中的主要影响因素,并建立了相应的超分辨率重建模型。基于该模型,首先采用误差-参数分析法估计嫦娥一号卫星CCD立体相机动态成像光学系统的点扩散函数(PSF);然后将估计的PSF应用到MAP算法所建立的目标函数中,采用共轭梯度法对目标函数进行最值求解;再通过VC软件平台编程实现了对单帧正视月表影像的超分辨率重建;最后从信息熵、清晰度和频谱等方面对重建图像进行评价,结果表明重建图像像质优良。