Novel sol–gel‐derived Ag/SiO2–Al2O3 catalysts for highly selective oxidation of methanol to formaldehyde

Novel Ag/SiO₂–Al₂O₃ catalysts with low silver content prepared by the sol–gel method exhibit excellent catalytic properties in the catalytic oxidation of methanol to formaldehyde. The silver content was as low as 2% and the yield of formaldehyde was achieved as 90.3%, which is 16% higher than that of pumice‐supported silver and even 5–6% higher than that of a commercial electrolytic silver catalyst. XRD, XPS and SEM results reveal that all silver was present as Ag⁺ before catalytic reaction and was partially reduced to the metallic state after the reaction. It was also found that silver was aggregated on the surface after its reduction. This revised version was published online in July 2006 with corrections to the Cover Date.     

The role of iodide promoter in selective oxidation of methanol to formaldehyde

The interaction of a CH₃I promoter and a commercial electrolytic silver catalyst was investigated using XPS, UPS and in situ confocal microprobe Raman spectroscopy. XPS and UPS results show evidence for formation of AgI on the surface of the silver catalyst. Interestingly, XPS results show no evidence for formation of any carbon species on the silver catalyst at room temperature, implying that CH₃I can be used as a “pure” I‐modifier in the catalytic oxidation of CH₃OH to HCHO. UPS results show a positive work function change (Δφ > 0) for the I‐modified catalysts. In situ Raman studies show that both the adsorption and reaction of methanol were promoted on the modified silver surface. The present experimental results provide not only an understanding of the surface chemistry of the silver catalyst but also a further understanding of the promotion effect of CH₃I in the selective oxidation of CH₃OH to HCHO. This revised version was published online in July 2006 with corrections to the Cover Date.     

Selective preparation of Ag species on photoluminescence of Sm3+ in borosilicate glass via Ag+-Na+ ion exchange

Photoluminescence (PL) of rare earth ion-doped glasses could be enhanced by diverse Ag species such as Ag⁺ ions, Ag⁺-Ag⁺ pairs, Ag nano-clusters (NCs), and Ag nanoparticles (NPs). Selective preparation of silver species in rare earth ion-doped glasses is a crucial step to obtain the luminescence enhancement of rare earth ions caused by the different silver species. In this work, Ag⁺ ions and Ag NCs were selectively prepared in the Sm³⁺-doped borosilicate glass via the Ag⁺-Na⁺ ion exchange. The influence of AgNO₃/NaNO₃ ratio in the molten salt on the Ag existing states was investigated. The results demonstrate that the isolated Ag⁺ ions exist in the Sm³⁺-doped borosilicate glass when the ratio of AgNO₃/NaNO₃ is 1/1000. The Ag NCs are formed in the Sm³⁺-doped borosilicate glass when the AgNO₃/NaNO₃ ratio is 1/10. The influence of Ag⁺ ions or Ag NCs on the PL of Sm³⁺ was systematically investigated. The results show that the PL of Sm³⁺ was enhanced by the energy transfer from Ag⁺ ions or Ag NCs to Sm³⁺.     

Reduction of NO2 stored in a commercial lean NO x trap at low temperatures

Isothermal storage of NO₂ and subsequent reduction with different reducing agents (H₂, CO or H₂ + CO) in a lean NO _x trap catalyst was tested by Temperature Programmed Desorption (TPD) and Temperature Programmed Reduction (TPR) experiments at temperatures representative of automotive “cold-start” conditions (<200 °C) using a commercial NO _x trap catalyst. Results from the TPR experiments revealed that no reduction of stored NO₂ to N₂ was observed at 100–180 °C, and at 200 °C 10% reduction only of NO₂ to N₂ was measured. A special affinity of H₂ to form NH₃ was observed during the reduction of stored NO₂. The formation of NH₃ increases with increasing amount of stored NO₂ and decreases with increasing storage temperature. Direct relation exists between the amount of adsorbed and/or stored NO₂ and the formation of H₂O and NH₃.     

Preparation and Characterization of Gelatin Nanofibers Containing Silver Nanoparticles

Ag nanoparticles (NPs) were synthesized in formic acid aqueous solutions through chemical reduction. Formic acid was used for a reducing agent of Ag precursor and solvent of gelatin. Silver acetate, silver tetrafluoroborate, silver nitrate, and silver phosphate were used as Ag precursors. Ag⁺ ions were reduced into Ag NPs by formic acid. The formation of Ag NPs was characterized by a UV-Vis spectrophotometer. Ag NPs were quickly generated within a few minutes in silver nitrate (AgNO₃)/formic acid solution. As the water content of formic acid aqueous solution increased, more Ag NPs were generated, at a higher rate and with greater size. When gelatin was added to the AgNO₃/formic acid solution, the Ag NPs were stabilized, resulting in smaller particles. Moreover, gelatin limits further aggregation of Ag NPs, which were effectively dispersed in solution. The amount of Ag NPs formed increased with increasing concentration of AgNO₃ and aging time. Gelatin nanofibers containing Ag NPs were fabricated by electrospinning. The average diameters of gelatin nanofibers were 166.52 ± 32.72 nm, but these decreased with the addition of AgNO₃. The average diameters of the Ag NPs in gelatin nanofibers ranged between 13 and 25 nm, which was confirmed by transmission electron microscopy (TEM).     

Influence of Al2O3 support on the activity of Ag/Al2O3 catalysts for SCR of NO with decane

The role of the Al₂O₃ support on the activity of supported Ag catalyst towards the selective catalytic reduction (SCR) of NO with decane is elucidated. A series of Ag/Al₂O₃ catalysts were prepared by impregnation method and characterized by N₂ pore size distribution, XRD, UV–Vis, in-situ FT-IR and acidity measurement by NH₃ and pyridine adsorption. The catalytic activity differences of Ag/Al₂O₃ are correlated with different properties of Al₂O₃ supports and the active Ag species formed. 4wt% Ag supported on sol-gel prepared Al₂O₃ (Ag/Al₂O₃ (SG), showed higher NO _x conversion (65% at 400 °C), compared with the respective catalysts made from commercial Al₂O₃ (Ag/Al₂O₃ (GB), Ag/Al₂O₃ (ALO), (∼26 and 7% at 400 °C). The higher surface area, acidity and pore size distribution in sol–gel prepared Al₂O₃ (SG) results in higher NO and hydrocarbon conversion. Based on the UV–vis characterization, the activity of NO reduction is correlated to the presence of Ag_n^δ+ clusters and acidity of Al₂O₃ support was found to be one of the important parameter in promoting the formation and stabilization of Ag_n^δ+ clusters. Furthermore from pyridine adsorption results, presence of more number of Bronsted acid sites in Ag/Al₂O₃ (SG) is confirmed, which could also contribute to low temperature hydrocarbon activation and improve NO conversion. In situ FT-IR measurements revealed the higher rate of –CN and –NCO intermediate species formation over 4wt% Ag/Al₂O₃ (SG). We conclude that the physico–chemical properties of Al₂O₃ play a crucial role in NO _x conversion over Ag/Al₂O₃ catalysts. Thus, the activity of the Ag/Al₂O₃ catalyst can be tailored by using a proper type of Al₂O₃ support.     

Mechanistic studies of CO2/CH4 reforming over Ni–La2O2/5A

The mechanism of CO₂/CH₄ reforming over Ni–La₂O₃/5A has been studied. The results of the CO₂‐pulsing experiments indicated that the amount of CO₂ converted was roughly proportional to the amount of H present on the catalyst, implying that CO₂ activation could be H‐assisted. Pulsing CH₄ onto a H₂‐reduced sample and a similar sample pretreated with CO₂, we found that CH₄ conversion was higher in the latter case. Hence, the idea of oxygen‐assisted CH₄ dissociation is plausible. The fact that the amount of CO produced in 10 pulses of CO₂/CH₄ was larger than that produced in 5 pulses of CO₂ followed by 5 pulses of CH₄, indicated that CO₂ and CH₄ could activate each other synergistically. In the chemical trapping experiments, following the introduction of CD₃I onto a Ni–La₂O₃/5A sample pretreated with CH₄/CO₂, we observed CD₃COOH, CD₃CHO, and CD₃OCD₃. In the in situ DRIFT experiments, IR bands attributable to formate and formyl were observed under working conditions. These results indicate that formate and formyl are intermediates for syngas generation in CO₂/CH₄ reforming, and active O is generated in the breaking of a C–O bond. Based on these results, we suggest that during CO₂/CH₄ reforming, CO₂ activation is H‐promoted and surface O species generated in CO₂ dissociation reacts with CH_x to give CO. A reaction scheme has been proposed. This revised version was published online in July 2006 with corrections to the Cover Date.     

Epoxidation of Propylene on a [Ag<Subscript>14</Subscript>O<Subscript>9</Subscript>] Cluster Representing Ag<Subscript>2</Subscript>O (001) Surface: A Density Functional Theory Study

Abstract  

Density functional theory calculations were employed to study partial oxidation of propylene on a [Ag₁₄O₉] cluster representing Ag₂O (001) surface for which positive effect for ethylene oxide formation has been reported in our earlier work at the same level of theory (Fellah et al., Catal Lett 141:762, 2011). Propylene oxide (PO), propanal, acetone and П-allyl radical formation reaction mechanisms were investigated. Π-allyl formation path and two propylene adsorption paths resulting in PO formation are competing reactions on silver oxide (001) surface because of their comparable activation barriers (9, 8 and 9 kcal/mol, respectively) while Π-allyl formation path is generally a more favorable path on Ag (111) surface as reported in previous theoretical literature. SO₂ adsorption calculations indicate that silver oxide has lower Lewis basicity relative to oxygen atom adsorbed on silver. Calculations also showed that surface oxygen atom of Ag₂O (001) has a higher spin density compared to that of oxygen atom adsorbed on Ag (111), which indicates that oxygen atom on Ag₂O (001) cluster has a more radical character.     

Mechanistic Study of Selective Oxidation of Dimethyl Ether to Formaldehyde over Alumina-supported Molybdenum Oxide Catalyst

XPS and IR spectroscopies were used to investigate the surface intermediates of dimethyl ether (DME) oxidation to formaldehyde over MoOx/Al₂O₃ catalyst. The reaction performances were tested by employing three typical reaction conditions, depending on the O₂/DME ratio and the reaction temperature. When there was sufficient oxygen present in the reaction media, a terminal or bridged CH₃O* species formed by DME dissociation was highly active and rapidly reacted with lattice oxygen to produce formaldehyde, leading to higher selectivity of HCHO. When oxygen was consumed completely or only DME was present in the reaction media, CH₃O species bonded to more than two Mo atoms (μ-OCH₃) and CH_x (x=1–3) species attached to the Mo atoms were observed and the relative ratio of (μ-OCH₃) /Mo–CH_x was significantly dependent on the reduction degree of MoO_x domains. The (μCH₃O) species was related to the formation of CH₃OH or CO_x, and the Mo–CH_x species led to the formation of CH₄.     

Gold nanoparticles: effect of treatment on structure and catalytic activity of Au/Fe2O3 catalyst prepared by co‐precipitation

1 wt% Au/Fe₂O₃ catalyst was prepared by a co‐precipitation method. The structure of the sample in the as prepared, oxidized and reduced states was investigated by means of X‐ray photoelectron spectroscopy (XPS), transition electron microscopy (TEM), electron diffraction (ED) and X‐ray diffraction (XRD). The structure of the samples after various treatments and their activity in the CO oxidation were compared. The results show the stability of the gold particle size during the treatments. However, after oxidation, a slight shift in the Au 4f binding energy towards lower values points to the formation of an electron‐rich state of the metallic gold particles compared to that revealed in the as prepared sample. Simultaneously, a goethite phase in the Fe₂O₃ support is present, which is not observed in the “as prepared” and reduced samples. In the reduced sample the presence of a crystalline maghemite‐c phase indicates a change in the support morphology. In the CO oxidation the oxidized sample shows the highest activity and it might be the result of the cooperative effect of goethite, FeO and the electron‐rich metallic gold nanoparticles. We suggest that a structural transformation occurs along the gold/support perimeter during the treatments and we propose a possible mechanism for the effect of the oxidation treatment. This revised version was published online in July 2006 with corrections to the Cover Date.     

Selective catalytic reduction (SCR) of NO by NH3 over TiO2-supported V2O5–WO3 and V2O5–MoO3 catalysts

A comparison between commercial and model WO₃–V₂O₅/TiO₂ and MoO₃–V₂O₅/TiO₂ SCR catalysts is considered in this study. The data indicate that WO₃ and MoO₃ behave as “structural” and “chemical” promoters for the catalysts. MoO₃-based catalysts are more active but less selective than WO₃–V₂O₅/TiO₂ catalysts in the SCR reaction, although in the presence of water the catalytic performances of the investigated samples are comparable. This revised version was published online in August 2006 with corrections to the Cover Date.     

Preparation and antibacterial activity of polyvinyl alcohol/regenerated silk fibroin composite fibers containing Ag nanoparticles

Polyvinyl alcohol (PVA)/regenerated silk fibroin (SF)/AgNO₃ composite nanofibers were prepared by electrospinning. A large number of nanoparticles containing silver were generated in situ and well‐dispersed nanoparticles were confirmed by transmission electron microscopy (TEM) intuitionally. Ultraviolet (UV)‐visible spectroscopy and X‐ray diffraction (XRD) patterns indicated that nanoparticles containing Ag were present both in blend solution and in composite nanofibers after heat treatment and after subsequent UV irradiation. By annealing the nanofibers, Ag⁺ therein was reduced so as to produce nanoparticles containing silver. By combining heat treatment with UV irradiation, Ag⁺ was transformed into Ag clusters and further oxidized into Ag₃O₄ and Ag₂O₂. Especially size of the nanoparticles increased with heat treatment and subsequent UV irradiation. This indicated that the nanoparticles containing silver could be regulated by heat treatment and UV irradiation. The antimicrobial activity of heat‐treated composite nanofibers was evaluated by Halo test method and the resultant nanofibers showed very strong antimicrobial activity. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

One step synthesis of Ag/Ag3PO4/BiPO4 double-heterostructured nanocomposites with enhanced visible-light photocatalytic activity and stability

Heterogeneous Ag/Ag₃PO₄/BiPO₄ photocatalyst was synthesized by a one-step low temperature chemical bath method and exhibited better photocatalytic activity and better stability than those of individual Ag₃PO₄ or BiPO₄ nanoparticles for photodegradation of organic compounds (Rhodamine B) in the absence of electron accepters under visible light (λ>420 nm). The enhanced photocatalytic performance is mainly ascribed to the strong visible-light absorption originating from high efficient separations of photogenerated electron–hole pairs through Ag₃PO₄/BiPO₄ and Ag/Ag₃PO₄ heterostructures.     

Effect of hydrogen on methane conversion to hydrocarbons in “one‐step” reaction under non‐oxidative conditions at low temperature over Pd–Co/SiO2 catalysts prepared by the sol/gel method

Methane conversion to higher hydrocarbons in a “one‐step” process under non‐oxidative conditions at low temperature was here first introduced and investigated over Co–Pd/SiO₂ catalysts at 250°C as a function of hydrogen concentration in helium and of catalyst composition. A maximum in the production of C₂₊ hydrocarbons including aromatics (benzene and toluene) was observed at 1.3 vol% H₂/He mixture in which one pulse of methane was introduced. Additional hydrogenation with the same H₂/He mixture at 400°C was efficient to remove the larger hydrocarbon fragments already existing on the surface. On pure Pd/SiO₂ the one‐step process is not so efficient as on cobalt‐rich samples, but in the latter case the hydrocarbon removal is the most efficient during high‐temperature hydrogenation. It was found that methane conversion in the one‐step process is at least 2.5 times greater than that measured in the “two‐step” process and, in some cases, 80% of the methane introduced is converted to larger hydrocarbons. The results are discussed in terms of the hydrogen coverage ensuring the optimum hydrogen content in the surface CH_x species leading to chain growth. This revised version was published online in July 2006 with corrections to the Cover Date.     

NO reduction over La2O3 using methanol

Nitric oxide (NO) reduction by methanol was studied over La₂O₃ in the presence and absence of oxygen. In the absence of O₂, CH₃OH reduced NO to both N₂O and N₂, with selectivity to dinitrogen formation decreasing from around 85% at 623 K to 50–70% at 723 K. With 1% O₂ in the feed, rates were 4–8 times higher, but the selectivity to N₂ dropped from 50% at 623 K to 10% at 723 K. The specific activities with La₂O₃ for this reaction were higher than those for other reductants; for example, at 773 K with hydrogen a specific activity of 35 _μmol NO/s m² was obtained whereas that for methanol was 600 μmol NO/s m². The Arrhenius plots were linear under differential reaction conditions, and the apparent activation energy was consistently near 14 kcal/mol with CH₃OH. Linear partial pressure dependencies based on a power rate law were obtained and showed a near‐zero order in CH₃OH and a near‐first order in H₂. In the absence of O₂, a Langmuir–Hinshelwood type model assuming a surface reaction between adsorbed CH₃OH and adsorbed NO as the slow step satisfactorily fitted the data, and the model invoking two types of sites provided the best fit and gave thermodynamically consistent rate constants. In the presence of O₂ a homogeneous gas‐phase reaction between O₂, NO, and CH₃OH occurred to yield methyl nitrite. This reaction converted more than 30% of the methanol at 300 K and continued to occur up to temperatures where methanol was fully oxidized. Quantitative kinetic studies of the heterogeneous reaction with O₂ present were significantly complicated by this homogeneous reaction. This revised version was published online in July 2006 with corrections to the Cover Date.     

Promotional effect of H2O on the activity of In2O3‐doped Ga2O3–Al2O3 for the selective reduction of nitrogen monoxide

Effect of metal oxide additives on the catalytic performance of Ga₂O₃–Al₂O₃ prepared by the sol–gel method for the selective reduction of NO with propene in the presence of oxygen was studied. Of several metal oxide additives, the addition of In₂O₃ enhanced drastically the activity of Ga₂O₃–Al₂O₃ for NO reduction by propene in the presence of H₂O. In addition, the activity of In₂O₃‐doped Ga₂O₃–Al₂O₃ catalyst was extremely intensified by the presence of H₂O below 350°C. The promotional effect of H₂O was interpreted by the suppression of undesirable propene oxidation and the removal of carbonaceous materials deposited on the catalyst surface. We also found that close interaction of In₂O₃ and Ga₂O₃ is necessary for the enhancement of activity by H₂O. A lot of hydrocarbons except methane and oxygenated compounds served as good reducing agents, among which propene and 2‐propanol were the most efficient ones. In₂O₃‐doped Ga₂O₃–Al₂O₃ catalyst was capable of reducing NO into N₂ quite efficiently in the presence of H₂O at a very high space velocity. This revised version was published online in July 2006 with corrections to the Cover Date.     

Cyclohexene dehydrogenation and hydrogenation on Pt(111) monitored by SFG surface vibrational spectroscopy: different reaction mechanisms at high pressures and in vacuum

The hydrogenation and dehydrogenation reactions of cyclohexene on Pt(111) crystal surfaces were investigated by surface vibrational spectroscopy via sum frequency generation (SFG) both under vacuum and high pressure conditions with 10 Torr cyclohexene and various hydrogen pressures from 30 up to ~600 Torr. At high pressures, the gas composition and turnover rate (TOR) were measured by gas chromatography. In vacuum, cyclohexene on Pt(111) undergoes a change from π/σ‐bonded, σ‐bonded cyclohexene and c‐C₆H₉ surface species to adsorbed benzene when the surface was heated from 130 to 330 K. A site‐blocking effect was observed at saturation coverage of cyclohexene that caused dehydrogenation to shift to somewhat higher surface temperature. At high pressures, however, none of the species observed in vacuum conditions were detectable. 1,4‐cyclohexadiene (1,4‐CHD) was found to be the major species on the surface at 295 K, even with the presence of nearly 600 Torr of hydrogen. Hydrogenation was the only detectable reaction at the temperature range between 300 and 400 K with 1,3‐cyclohexadiene (1,3‐CHD) on the surface, as revealed by SFG. Further increasing the surface temperature results in a decrease in hydrogenation reaction rate and an increase in dehydrogenation reaction rate and both 1,3‐CHD and 1,4‐CHD were present on the surface simultaneously. The simultaneous observation of the reaction kinetic data and the chemical nature of surface species allows us to postulate a reaction mechanism at high pressures: cyclohexene hydrogenates to cyclohexane via a 1,3‐CHD intermediate and dehydrogenates to benzene through both 1,4‐CHD and 1,3‐CHD intermediates. Isomerisation of the 1,4‐CHD and 1,3‐CHD surface species is negligible. This revised version was published online in July 2006 with corrections to the Cover Date.     

Catalytic Conversion of NO and C3H6 in Exhaust Gases Over Silver Catalysts Under Stoichiometric or Excess Oxygen

The role of Ag in simultaneously catalyzing NO reduction and C₃H₆ oxidation was shown to be strongly dependent on the redox properties of its local environment. Under an atmosphere of 1,000 ppm NO, 3,000 ppm C₃H₆, and 1% O₂ and a GHSV of 30,000 h⁻¹, a perovskite La_0.88Ag_0.12FeO₃ prepared by reactive grinding is active giving a complete NO conversion and 92% C₃H₆ conversion at 500 °C. These values are much higher than the NO conversion of 55% and C₃H₆ conversion of 45% obtained over a 3 wt.% Ag/Al₂O₃ catalyst under the same conditions. Under an excess of oxygen (10% O₂) a good SCR performance with a plateau of N₂ yield above 97% over a wide temperature window of 350–500 °C along with C₃H₆ conversion of 90% at 500 °C was observed over Ag/Al₂O₃, while minor N₂ yields (∼10% at 250–350 °C) and high C₃H₆ conversions (reaching ∼100% at 450 °C) were obtained over La_0.88Ag_0.12FeO₃. Abundant molecular oxygen is desorbed from Ag substituted perovskite after 10% O₂ adsorption as verified by O₂- temperature programmed desorption (TPD). This reflects the strongly oxidative properties of La_0.88Ag_0.12FeO₃, which lead to a satisfactory NO reduction at 1% O₂ due to the ease of nitrate formation but to a significant C₃H₆ combustion above that value. The formation of nitrate species over the less oxidizing Ag/Al₂O₃ was accelerated under an excess of oxygen resulting in an excellent lean NO reduction behavior. The redox properties of silver catalysts could be adjusted via mixing perovskite with alumina for an optimal elimination of both NO and C₃H₆ over the whole range of oxygen concentration between 0 to 10%.     

A comparative study of the selective oxidation of NH3 to N2 over gold, silver and copper catalysts and the effect of addition of Li2O and CeOx

This paper describes the selective oxidation of ammonia into nitrogen over copper, silver and gold catalysts between room temperature and 400 °C using different NH₃/O₂ ratios. The effect of addition of CeO_x and Li₂O on the activity and selectivity is also discussed. The results show that copper and silver are very active and selective toward N₂. However the multicomponent catalysts: M/Li₂O/CeO_x/Al₂O₃ (M: Au, Ag, Cu) perform the best. On all three metal containing catalysts the activity and selectivity is influenced by the particle size and the interaction between metal particles and support.     

Lithium insertion in ultra-thin nanobelts of Ag2V4O11/Ag

In this study, ultra-thin nanobelts of Ag₂V₄O₁₁/Ag were successfully synthesized. The synthesized ultra-thin nanobelts of Ag₂V₄O₁₁/Ag are highly crystalline and the thickness is found to be about 5 nm. A lithium battery using ultra-thin nanobelts of Ag₂V₄O₁₁/Ag as the active materials of the positive electrode exhibits a high initial discharge capacity of 276 mAh g⁻¹, corresponding to the formation of Li_xAg₂V₄O₁₁ (x = 6). With increased cycling, the electrode made of ultra-thin nanobelts of Ag₂V₄O₁₁/Ag tends to loose electrochemical activity due to Ag⁺ ions in the ultra-thin nanobelts of Ag₂V₄O₁₁ were reduced and new phase was formed.