重叠比对三叶片Savonius风力机启动性能影响研究

为获得相对平稳且非负的启动力矩,针对三叶片Savonius风力机开展研究。首先对比研究两叶片和三叶片Savonius风力机的启动性能和输出功率特性。在此基础上,针对其主要的结构参数重叠比开展研究。针对三叶片的结构特点,提出重叠比和净重叠比的定义方式,设置9组不同净重叠比,范围在0～0.36（重叠比范围0.14～0.50）之间。利用数值模拟和风洞试验相结合的方法,研究在不同风速下重叠比对Savonius风力机启动力矩以及输出功率性能的影响。结果表明：净重叠比可消除反向启动力矩,并提升三叶片Savonius风力机的启动性能,平均启动力矩系数最高提升147.06%。净重叠比在0.06～0.11范围内时,对风力机的输出功率有提高作用。     

Experimental investigations on single stage,two stage and three stage conventional Savonius rotor

The performance of single stage (rotor aspect ratio of 1.0), two stage Savonius rotor with rotor aspect ratios of 1.0 and 2.0 (stage aspect ratios of 0.50 and 1.0) and three stage Savonius rotor with rotor aspect ratios of 1.0 and 3.0 (stage aspect ratios of 0.33 and 1.0) are studied at different Reynolds numbers and compared at the same Reynolds number. The results show that the coefficient of power and the coefficient of torque increase with the increase in the Reynolds numbers for all the rotors tested. The coefficient of static torque is independent of the Reynolds number for all the rotors tested. The performance of two stage and three stage rotors remains the same even after increasing the stage aspect ratio and the rotor aspect ratio by a factor of two and three, respectively. For the same rotor aspect ratio of 1.0, by increasing the number of stages (stage aspect ratio decreases), the performance deteriorates in terms Cp and Ct. However, at the same stage aspect ratio of 1.0 and same Reynolds number, two and three stage rotors show the same performance in terms of coefficient of power and coefficient of torque. The variation in coefficient of static torque is lower for a three stage rotor when compared with the variation of coefficient of static torque for two stage or single stage rotor. Copyright © 2008 John Wiley & Sons, Ltd.     

Comparative study of a three-bucket Savonius rotor with a combined three-bucket Savonius–three-bladed Darrieus rotor

The vertical axis wind turbines are simple in construction, self-starting, inexpensive and can accept wind from any direction without orientation. A combined Savonius–Darrieus type vertical axis wind rotor has got many advantages over individual Savonius or individual Darrieus wind rotor, such as better efficiency than Savonius rotor and high starting torque than Darrieus rotor. But works on the combined Savonius–Darrieus wind rotor are very scare. In view of the above, two types of models, one simple Savonius and the other combined Savonius–Darrieus wind rotors were designed and fabricated. The Savonius rotor was a three-bucket system having provisions for overlap variations. The Savonius–Darrieus rotor was a combination of three-bucket Savonius and three-bladed Darrieus rotors with the Savonius placed on top of the Darrieus rotor. The overlap variation was made in the upper part, i.e. the Savonius rotor only. These were tested in a subsonic wind tunnel available in the department. The various parameters namely, power coefficients and torque coefficients were calculated for both overlap and without overlap conditions. From the present investigation, it is seen that with the increase of overlap, the power coefficients start decreasing. The maximum power coefficient of 51% is obtained at no overlap condition. However, while comparing the power coefficients (C_p) for simple Savonius-rotor with that of the combined configuration of Savonius–Darrieus rotor, it is observed that there is a definite improvement in the power coefficient for the combined Savonius–Darrieus rotor without overlap condition. Combined rotor without overlap condition provided an efficiency of 0.51, which is higher than the efficiency of the Savonius rotor at any overlap positions under the same test conditions.     

Performance tests on helical Savonius rotors

Conventional Savonius rotors have high coefficient of static torque at certain rotor angles and a negative coefficient of static torque from 135° to 165° and from 315° to 345° in one cycle of 360°. In order to decrease this variation in static torque from 0° to 360°, a helical Savonius rotor with a twist of 90° is proposed. In this study, tests on helical Savonius rotors are conducted in an open jet wind tunnel. Coefficient of static torque, coefficient of torque and coefficient of power for each helical Savonius rotor are measured. The performance of helical rotor with shaft between the end plates and helical rotor without shaft between the end plates at different overlap ratios namely 0.0, 0.1 and 0.16 is compared. Helical Savonius rotor without shaft is also compared with the performance of the conventional Savonius rotor. The results indicate that all the helical Savonius rotors have positive coefficient of static torque at all the rotor angles. The helical rotors with shaft have lower coefficient of power than the helical rotors without shaft. Helical rotor without shaft at an overlap ratio of 0.0 and an aspect ratio of 0.88 is found to have almost the same coefficient of power when compared with the conventional Savonius rotor. Correlation for coefficient of torque and power is developed for helical Savonius rotor for a range of Reynolds numbers studied.     

叶片转角对小型Savonius风机气动性能的影响

Savonius风机是一种典型的垂直轴风力发电机,通过对其进行流固耦合分析,研究叶片转角对风机气动性能的影响。利用ANSYS的CFX流体模块,流体湍流模型选择基于RANS的标准k-ε湍流模型,对风轮进行流固耦合分析,从而获得叶片产生的力矩情况,并计算了风机的功率特性。利用求解结果,得到了力矩系数与叶片转角之间的关系。分析了风机叶片在旋转一周中所产生的最大扭矩以及负扭矩所处的位置和范围。通过分析转角对风机性能的影响,可为今后的Savonius风机叶片形状优化和效率提升提供参考。     

Experimental investigation of helical Savonius rotor with a twist of 180°

Conventional Savonius rotors have low performance such as low coefficient of power and low coefficient of torque. In order to increase this performance, a helical Savonius rotor with a twist of 180° is proposed. In this paper, we are interested in studying the aerodynamic behavior of the helical Savonius rotors installed in an open jet wind tunnel. Particularly we are interested in studying the influence of variation of Reynolds number and the overlap ratio on the performance of a modified Savonius rotor with aspect ratio of 1.57 at a Reynolds numbers equal to Re = 79,794, Re = 99,578, Re = 116,064 and Re = 147,059. Results conclude that the variation of Reynolds number and overlap ratio has an effect on the global characteristics of the helical Savonius rotor. A comparison between the helical one and the conventional one shows that the maximum power coefficient of the Savonius wind rotor is higher. This work is developed at Laboratory of Electro-Mechanical System (LASEM) of the National School of Engineers of Sfax (ENIS).     

Power correlation for vertical axis wind turbines with varying geometries

In this paper, a new predictive model that can forecast the performance of a vertical axis wind turbine (VAWT) is presented. The new model includes four primary variables (rotor velocity, wind velocity, air density, and turbine power output) as well as five geometrical variables (rotor radius, turbine height, turbine width, stator spacing, and stator angle). These variables are reduced to include the power coefficient (C_p) and tip speed ratio (TSR). A power coefficient correlation for a novel VAWT (called a Zephyr Vertical axis Wind Turbine (ZVWT)) is developed. The turbine is an adaptation of the Savonius design. The new correlation can predict the turbine's performance for altered stator geometry and varying operating conditions. Numerical simulations with a rotating reference frame are used to predict the operating performance for various turbine geometries. The case study includes 16 different geometries for three different wind directions. The resulting 48 data points provide detailed insight into the turbine performance to develop a general correlation. The model was able to predict the power coefficient with changes in TSR, rotor length, stator spacing, and stator angle, to within 4.4% of the numerical prediction. Furthermore, the power coefficient was predicted with changes in rotor length, stator spacing, and stator angle, to within 3.0% of the numerical simulations. This correlation provides a useful new design tool for improving the ZVWT in the specific conditions and operating requirements specific to this type of wind turbine. Also, the new model can be extended to other conditions that include different VAWT designs. Copyright © 2010 John Wiley & Sons, Ltd.     

Unsteady Aerodynamics of a Savonius wind rotor: a new computational approach for the simulation of energy performance

When compared with of other wind turbine the Savonius wind rotor offers lower performance in terms of power coefficient, on the other hand it offers a number of advantages as it is extremely simple to built, it is self-starting and it has no need to be oriented in the wind direction. Although it is well suited to be integrated in urban environment as mini or micro wind turbine it is inappropriate when high power is requested. For this reason several studies have been carried-out in recent years in order to improve its aerodynamic performance. The aim of this research is to gain an insight into the complex flow field developing around a Savonius wind rotor and to evaluate its performance. A mathematical model of the interaction between the flow field and the rotor blades was developed and validated by comparing its results with data obtained at Environmental Wind Tunnel (EWT) laboratory of the “Polytechnic University of Marche”.     

Testing basic performance of a very small wind turbine designed for multi-purposes

A very small wind turbine system for multi-purposes was developed and its performance was reported in this paper. The rotor diameter of the turbine is 500 mm. The tests of the energy output, turbine speed, power coefficient, and torque of turbine were carried out for a wide rage of free stream velocity. The flow around the wind turbine and the influence of the turbulence were investigated with a particle image velocimetry. Experimentally obtained power coefficient was 0.4 in maximum and 0.36 in the rated running condition, respectively. The tip speed ratio corresponding to the optimum driving condition was 2.7. Comparing with the other commercial turbines, the performance was excellent at a slow turbine speed. By the flow visualization and PIV measurement around the wind turbine, the approaching flow velocity and the accelerated flow field passing the blade tip was obtained. It was confirmed that the actual flow passed through the blades was about 20% slower than the ideal flow. Tip vortex shed from the blade tip was also visualized clearly.     

阻力型垂直轴风力机导风帘的优化设计

以输出功率100W的阻力型垂直轴型风力机为例,通过优化设计找寻最佳的叶片数目、高径比和折叠率等几何参量,然后加入导风帘装置,给出一个最佳结构方案。运用Fluent求解器中的有限体积法对无导风帘和三种不同长度导风帘设计的叶片周围的流场进行模拟。模拟与最佳优化方式的性能参数的计算结果表明,采用长导风帘设计的阻力型垂直轴风力机具有最好的动力学性能,可以提高运行效率。     

Influence of the deflector plate on the performance of modified Savonius water turbine

Savonius rotor is simple in design and easy to fabricate at a lower cost. The basic driving force of Savonius rotor is drag. The drag coefficient of a concave surface is more than the convex surface. Hence, the advancing blade with concave side facing the water flow would experience more drag force than the returning blade, thus forcing the rotor to rotate. Net driving force can be increased by reducing the reverse force on the returning blade. This can be realized by providing flow obstacle to the returning blade. The objective of the present work is to find out the optimal position of the deflector plate upstream to the flow which would result in maximum power generated by the rotor. Experimental investigations are carried out to study the influence of the location of the deflector plate on the performance of a modified Savonius rotor with water as the working medium at a Reynolds number of 1.32 × 10⁵. Eight different positions of the deflector plate are attempted in this study. Results conclude that deflector plate placed at its optimal position increases the coefficient of power by 50%. Maximum coefficient of power is found to be 0.21 at a tip speed ratio of 0.82 in the presence of deflector plate. Two stage and three stage modified Savonius rotors are tested to study the influence of deflector plate at the optimal position. Maximum coefficient of power improves by 42%, 31% and 17% with deflector plate for two stage 0° phase shift, 90° phase shift and three stage modified Savonius rotor respectively.     

垂直轴风力机两种翼型气动性能比较研究

叶片是风力机最重要的组成部分,在不同的风能资源情况下,翼型的选择对垂直轴风力机气动特性有着重要的影响。文章分别以NACA0018翼型(对称翼型)和NACA4418翼型(非对称翼型)建立3叶片H型垂直轴风力机二维仿真模型。应用数值模拟的研究方法,从功率系数、单个叶片切向力系数等方面比较两种风力机模型在不同叶尖速比下的气动特性,并采用风洞实验数据验证了流场计算的准确性。CFD计算结果表明:在低叶尖速比下,NACA4418翼型风力机气动特性优于NACA0018翼型风力机,适用于低风速区域;在高叶尖速比下,NACA0018翼型风力机气动特性较好,适用于高风速地区。而且在高叶尖速比时,NACA0018翼型在上风区时,切向力系数平均值要高于NACA4418翼型,在下风区时,NACA418翼型切向力系数平均值高。该研究可为小型垂直轴风力机翼型的选择提供参考。     

Influence of setting condition on characteristics of Savonius hydraulic turbine with a shield plate

The aim of this investigation was to improve power performance of Savonius hydraulic turbine utilizing small stream for electric generation.An attempt was made to increase the power coefficient of runner by the use of flat shield plate placed upstream of the runner.The difference of the power coefficient is discussed in relation to clearance between the runner and the bottom wall and the rotation direction of the runner.The flow field around the runner was also examined visually to clarify influences of set...     

加装后缘小翼的垂直轴风力机输出特性研究

为了研究H型垂直轴风力机后缘加装小翼的输出特性变化规律,文章以NACA0012翼型叶片为例,采用风洞试验与数值模拟的方法,对加装后缘小翼的风力机进行了研究。模拟结果表明,加装后缘小翼的风力机的单叶片扭矩系数及功率性能要优于未加装小翼的风力机,整体功率较未加装小翼的风力机略有提升。风洞实验结果表明:加装后缘小翼可以提高风力机的最大输出功率,其中径长比对于加装小翼的垂直轴风力机功率提升的影响较大;当转速小于300 r/min时,安装径长比为0.6的后缘小翼的风力机输出功率最高;当转速超过300 r/min时,径长比为0.4的后缘小翼的风力机输出功率最高。     

A review on the performance of Savonius wind turbines

This paper presents a review on the performance of Savonius wind turbines. This type of turbine is unusual and its application for obtaining useful energy from air stream is an alternative to the use of conventional wind turbines. Simple construction, high start up and full operation moment, wind acceptance from any direction, low noise and angular velocity in operation, reducing wear on moving parts, are some advantages of using this type of machine. Over the years, numerous adaptations for this device were proposed. The variety of possible configurations of the rotor is another advantage in using such machine. Each different arrangement of Savonius rotor affects its performance. Savonius rotor performance is affected by operational conditions, geometric and air flow parameters. The range of reported values for maximum averaged power coefficient includes values around 0.05–0.30 for most settings. Performance gains of up to 50% for tip speed ratio of maximum averaged power coefficient are also reported with the use of stators. Present article aims to gather relevant information about Savonius turbines, bringing a discussion about their performance. It is intended to provide useful knowledge for future studies.     

Optimization of Savonius turbines using an obstacle shielding the returning blade

Due to the worldwide energy crisis, research and development activities in the field of renewable energy have been considerably increased in many countries. In Germany, wind energy is becoming particularly important. Although considerable progress has already been achieved, the available technical design is not yet adequate to develop reliable wind energy converters for conditions corresponding to low wind speeds and urban areas. The Savonius turbine appears to be particularly promising for such conditions, but suffers from a poor efficiency. The present study considers a considerably improved design in order to increase the output power of a Savonius turbine with either two or three blades. In addition, the improved design leads to a better self-starting capability. To achieve these objectives, the position of an obstacle shielding the returning blade of the Savonius turbine and possibly leading to a better flow orientation toward the advancing blade is optimized. This automatic optimization is carried out by coupling an in-house optimization library (OPAL) with an industrial flow simulation code (ANSYS-Fluent). The optimization process takes into account the output power coefficient as target function, considers the position and the angle of the shield as optimization parameters, and relies on Evolutionary Algorithms. A considerable improvement of the performance of Savonius turbines can be obtained in this manner, in particular a relative increase of the power output coefficient by more than 27%. It is furthermore demonstrated that the optimized configuration involving a two-blade rotor is better than the three-blade design.     

不同扩散体对建筑增强型垂直轴风力机气动性能的影响

为研究不同建筑扩散体对建筑增强型直线翼垂直轴风力机的气动性能与流场结构的影响,采用CFD数值模拟的方法,以NACA0021为叶片翼型的多叶片建筑增强型直线翼垂直轴风力机为对象,研究其在不同建筑扩散体及不同尖速比下的气动性能。结果表明:建筑增强型直线翼垂直轴风力机存在最佳尖速比;不同建筑扩散体对提高直线翼垂直轴风力机风能利用率影响较大,在所选取的8种建筑扩散体模型中,梯形建筑扩散体下的直线翼垂直轴风力机在尖速比为4.62时标准化风能利用率可达1.560 7,而A1翼型式建筑扩散体下的直线翼垂直轴风力机前后压差较小,风能难以利用。     

小型Savonius风机的创新设计与仿真分析

Savonius风机是一种典型的垂直轴风力机。针对传统风机的发电机部分采用转子、定子一动一静的设计布局,提出了一种新型的发电机结构,从而提高风机发电效率。通过有限元分析软件ANSYS／CFX,对风力机模型进行流体分析,计算Savonius风力机的效率,验证本设计分析方法的正确性。     

Performances of ideal wind turbine

If there is an ideal wind turbine, its performances will be the pursuit goals for designing the actual wind turbine. In this paper, the wind turbine that has the maximum efficiency is defined as ideal wind turbine, which has three main features: lift-drag ratio is infinite, it has enough number blades so that the blade tip and root losses can be ignored, and its blades are limited in width. Using blade element theory, the differential equations of power, torque, lift and thrust of blade element were derived, and the expressions of power, torque, lift and thrust coefficients of the ideal wind turbine were gained by integrating along the blade span. Research shows that the power, torque and lift coefficients of the ideal wind turbine are functions of tip-speed ratio. When the lift-drag ratio and the tip-speed ratio is approaching infinity, power coefficient of the ideal wind turbine is close to the Betz limit; The torque limit is 0.401 when the tip-speed ratio equals about 0.635; The Lift limit is 0.578 when the tip-speed ratio equals about 0.714; The thrust coefficient is 8/9, which is unrelated with tip-speed ratio. For any wind turbine which tip-speed ratio is less than 10, the power coefficient is unlikely to exceed 0.585, for any high-speed wind turbine which tip-speed ratio is greater than 6, the torque coefficient in steady state is unlikely to exceed 0.1, and the lift coefficient is unlikely to exceed 0.2.     

Assessment of optimum tip speed ratio in wind turbines using artificial neural networks

Wind turbine blade design depends on several factors, such as turbine profile used, blade number, power factor, and tip speed ratio. The key to designing a wind turbine is to assess the optimal tip speed ratio (TSR). This will directly affect the power generated and, in turn, the effectiveness of the investment made. TSR is suggested to be taken between 7 and 8 and in practice generally taken as 7 for a 3-blade network-connected wind turbine. However, the optimal TSR is dependent upon the profile type used and the blade number and could fall out of the boundaries suggested. Therefore, it has to be assessed accordingly. In this study, the optimal TSR and the power factor of a wind turbine are predicted using artificial neural networks (ANN) based on the parameters involved for NACA 4415 and LS-1 profile types with 3 and 4 blades. The ANN structure built is found to be more successful than the conventional approach in estimating the TSR and power factor.