醇与离子液体二元双水相体系萃取四环素

以异丙醇、NaH2PO4和1-丁基-3-甲基咪唑四氟硼酸（[Bmim]BF4）离子液体来构成醇与离子液体二元双水相体系,用于萃取水体中的四环素。考察了NaH2PO4含量、pH值、离子液体含量以及四环素质量浓度对四环素萃取效果的影响。结果表明,当体系的pH在4.0~5.0,NaH2PO4含量为36%,四环素的质量浓度在65~95 mg/L时,体系对四环素的萃取率可达91.98%~94.98%,分配系数可达82.135~130.315。     

Antimicrobial properties and thermal stability of polycarbonate modified with 1‐alkyl‐3‐methylimidazolium tetrafluoroborate ionic liquids

Four water immiscible ionic liquids (ILs): 1‐hexyl‐3‐methylimidazolium tetrafluoroborate, 1‐heptyl‐3‐methylimidazolium tetrafluoroborate, 1‐octyl‐3‐methylimidazolium tetrafluoroborate and 1‐dodecyl‐3‐methylimidazolium tetrafluoroborate have been synthesized. Polycarbonate (PC) films containing ILs were prepared by solvent casting from methylene chloride solutions. Scanning electron microscopy measurements showed the high homogeneity of PC/IL films with the IL content up to 4 wt %. The tendency to IL aggregation was observed for polymeric films with higher IL content (5%). PC/IL composites were found to have the reduced thermal decomposition temperature under both an air and a nitrogen atmosphere in comparison with the neat PC. The effect of IL content on the antimicrobial activity of PC films against Escherichia coli bacteria was studied. Pronounced antimicrobial efficacy was revealed for PC/IL films for all studied ILs starting from 3 wt % of IL. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40050.     

Use of 1‐hexyl‐3‐methylimidazolium bromide ionic liquid in the recovery of lactic acid from wine

BACKGROUND: Lactic acid has many different applications in a variety of industries including the food, cosmetics, packaging, leather and chemical industries. Current methodologies for lactic acid production are lengthy and complicated and more efficient methods are being sought. Some organic wastes contain lactic acid and our work investigates the use of ionic liquids (ILs) in the efficient and selective extraction of lactic acid from organic waste using wine as a model system. The ionic liquid was chosen based on its ability to selectively solvate and separate lactic acid from the remaining bulk waste material. RESULTS: Several ILs including 1‐hexyl‐3‐methylimidazolium chloride (hmimCl), 1‐hexyl‐3‐methylimidazolium bromide (hmimBr), 1‐hexyl‐3‐methylimidazolium iodide (hmimI) and N‐hexylpyridinium iodide (hpyrI) have been synthesized in high yield (68‐95%) using microwave technology. Lactic acid is soluble in each of the ILs synthesized with optimum results achieved with hmimBr where lactic acid is miscible in all proportions. HmimBr has been used to successfully separate and extract lactic acid from wine as confirmed by FTIR spectroscopy. Furthermore, it has been possible to recover the IL for recycle in subsequent extraction cycles where the efficiency for the extraction process increases with each recycle. CONCLUSION: HmimBr has been used for the first time in a novel process for the separation and recovery of lactic acid from wine, as confirmed by FTIR spectroscopy. This work demonstrates a novel process which can be applied to the recovery of lactic acid from organic waste. Copyright © 2012 Society of Chemical Industry     

Regenerated cellulose membrane prepared with ionic liquid 1‐butyl‐3‐methylimidazolium chloride as solvent using wheat straw

BACKGROUND: Currently, cellulose membranes are prepared by cellulose acetate hydrolysis or chemical derivatization dissolution and regeneration using cotton pulp or wood pulp. In this study, the concept ‘lignocelluloses biorefinery’ was used, and good quality long fiber was fractionated from wheat straw using clean technologies. The objective of this study is to develop wheat straw cellulose to prepare regenerated cellulose membrane with ionic liquid 1‐butyl‐3‐methylimidazolium chloride ([BMIM]Cl) as solvent. RESULTS: Wheat straw cellulose (WSC) fractionated from wheat straw contained 93.6% α‐cellulose and the degree of polymerization (DP) was 580. WSC was dissolved directly without derivatization in [BMIM]Cl. With increase in dissolving temperature, the DP of the regenerated cellulose dropped, which resulted in a decrease in the intensity of regenerated cellulose membrane. After regeneration in [BMIM]Cl, the WSC transformed from cellulose I to cellulose II, and the crystallinity of the regenerated cellulose was lower than the original cellulose. The regenerated WSC membrane had good mechanical performance and permeability, the tensile strength and breaking elongation were 170 MPa and 6.4%, respectively, the pure water flux was 238.9 L m^?2 h^?1 at 0.3 MPa pressure, and the rejection of BSA was stabilized at about 97%. CONCLUSION: Wheat straw cellulose fractionated from wheat straw satisfied the requirement to prepare regenerated cellulose membrane using ionic liquid [BMIM]Cl as solvent. Copyright © 2012 Society of Chemical Industry     

Electrochemical aspects of black chromium electrodeposition from 1-butyl-3-methylimidazolium tetrafluoroborate ionic liquid

The electrochemical behaviour of trivalent chromium (Cr³⁺) in 1-butyl-3-methylimidazolium tetrafluoroborate [BMIm][BF₄] ionic liquid solutions was studied by cyclic voltammetry and chronoamperometry. The reduction of Cr³⁺ occurs in two steps, Cr³⁺ to Cr²⁺ and Cr²⁺ to Cr⁰, respectively. The first step is quasi-reversible with a diffusion coefficient of Cr³⁺ in solution of 3.13 × 10⁻⁸ cm² s⁻¹ at 303 K and 25.8 × 10⁻⁸ cm² s⁻¹ at 358 K, estimated from cyclic voltammetry data.Black chromium films were electrodeposited on copper, stainless steel and carbon steel substrates at a constant potential of −1.5 V vs Pt quasi-reference electrode. The films consist of aggregates of nanosized particles. The coatings in the as-deposited condition present an amorphous structure but after annealing for 4 h, a nanocrystalline Cr₂O₃ phase is formed, with an average crystallite size of 17 nm.     

Crystallization behavior and isothermal crystallization kinetics of PLLA blended with ionic liquid, 1‐butyl‐3‐methylimidazolium dibutylphosphate

The crystallization behavior and isothermal crystallization kinetics of neat poly(l ‐lactic acid) (PLLA) and PLLA blended with ionic liquid (IL), 1‐butyl‐3‐methylimidazolium dibutylphosphate, were researched by differential scanning calorimetry (DSC), polarizing optical microscopy (POM), and wide angle X‐ray diffraction (WXRD). Similar to the non‐isothermal crystallization behavior of neat PLLA, when PLLA melt was cooled from 200 to 20°C at a cooling rate of 10°C min^?1, no crystallization peak was detected yet with the incorporation of IL. However, the glass transition temperature and cold crystallization temperature of PLLA gradually decreased with the increase of IL content. It can be attributed to the significant plasticizing effect of IL, which improved the chain mobility and cold crystallization ability of PLLA. Isothermal crystallization kinetics was also analyzed by DSC and described by Avrami equation. For neat PLLA and IL/PLLA blends, the Avrami exponent n was almost in the range of 2.5–3.0. It is found that t_1/2 reduced largely, and the crystallization rate constant k increased exponentially with the incorporation of IL. These results show that the IL could accelerate the overall crystallization rate of PLLA due to its plasticizing effect. In addition, the dependences of crystallization rate on crystallization temperature and IL content were discussed in detail according to the results obtained by DSC and POM measurements. It was verified by WXRD that the addition of IL could not change the crystal structure of PLLA matrix. All samples isothermally crystallized at 100°C formed the α‐form crystal. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41308.     

Modification of sulfonated poly(ether ether ketone) membranes by impregnation with the ionic liquid 1‐butyl‐3‐methylimidazolium tetrafluoroborate for proton exchange membrane fuel cell applications

Sulfonated poly(ether ether ketone) (SPEEK) membranes were modified by impregnation with the ionic liquid (IL) 1‐butyl‐3‐methylimidazolium tetrafluoroborate (BMI.BF₄) by immersion into an IL aqueous solution for different periods of time. The modified membranes were investigated by thermogravimetric analyses (TGA), differential scanning calorimetry (DSC), ion exchange capacity (IEC), and conductivity. The SPEEK membrane immersed into the IL aqueous solution for 2 min showed greater dimensional and thermal stability than the pristine SPEEK membrane, and achieved higher decomposition temperatures. It also presented a higher conductivity value (1.0 mS cm^?1), indicating that BMI.BF₄ is a promoter of proton conductivity. The membrane electrode assembly (MEA) produced reached maximum values of power density of 0.13 W cm^?2 and current density of 0.54 A cm^?2 during fuel cell operation. The results indicate that the SPEEK membrane modified by immersion for 2 min is promising for use in a proton exchange membrane fuel cell. Its performance yielded values very close to those obtained with Nafion, which reaches maximum values of power density of 0.19 W cm^?2 and current density of 0.77 A cm^?2. POLYM. ENG. SCI. 56:1037–1044, 2016. © 2016 Society of Plastics Engineers     

Electrical,mechanical, structural,and thermal behaviors of polymeric gel electrolyte membranes of poly(vinylidene fluoride‐co‐hexafluoropropylene) with the ionic liquid 1‐butyl‐3‐methylimidazolium tetrafluoroborate plus lithium tetrafluoroborate

Polymeric gel electrolyte membranes based on the polymer poly(vinylidene fluoride‐co‐hexafluoropropylene) [P(VdF–HFP)] with different weight percentages of the ionic liquid (IL) 1‐butyl‐3‐methylimidazolium tetrafluoroborate plus 0.3M lithium tetrafluoroborate (LiBF₄) salt were prepared and characterized by scanning electron microscopy, X‐ray diffraction, differential scanning calorimetry, thermogravimetric analysis, Fourier transform infrared (FTIR) spectroscopy, complex impedance spectroscopy, pulse echo techniques, and Vickers hardness (H) testing. After the incorporation of the IL plus the salt solution in the P(VdF–HFP) polymer, the melting temperature, glass‐transition temperature (T_g), degree of crystallinity, thermal stability, elastic modulus (E), and hardness (H) gradually decreased with increasing content of the IL–salt solution as a result of complexation between the P(VdF–HFP) and IL. This was confirmed by FTIR spectroscopy. A part of the IL and LiBF₄ were found to remain uncomplexed as well. The ionic conductivity (σ) of the polymeric gel membranes was found to increase with increasing concentration of the IL–salt solution. The temperature‐dependent σs of these polymeric gel membranes followed an Arrhenius‐type thermally activated behavior. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41456.     

Evaluation of 1‐ethyl‐3‐methylimidazolium acetate based ionic liquid systems as a suitable solvent for collagen

Collagen, a prominent biopolymer, which is famous for its excellent biological activity, has been used extensively for tissue engineering applications. In this study, a novel solvent system for collagen was developed with an ionic liquid, 1‐ethyl‐3‐methylimidazolium acetate ([EMIM][Ac]), solvent system. A series of sodium salts were introduced into this solvent system to enhance collagen's dissolution procedure. The results show that the solubility of collagen was significantly influenced by the temperature and sodium salts. The solubility reached up to approximately 11% in the [EMIM][Ac]/Na₂HPO₄ system at 45°C. However, the structure of the regenerated collagen (Col‐regenerated) may have been damaged. Hence, we focused on the structural integrity of the collagen regenerated from the [EMIM][Ac] solvent system by the methods of sodium dodecyl sulfate–polyacrylamide gel electrophoresis, Fourier transform infrared spectroscopy, ultrasensitive differential scanning calorimetry, atomic force microscopy, X‐ray diffraction, and circular dichroism because its signature biological and physicochemical properties were based on its structural integrity. Meanwhile, a possible dissolution mechanism was proposed. The results show that the triple‐helical structure of collagen regenerated from the [EMIM][Ac] solvent system below 35°C was retained to a large extent. The biocompatibility of Col‐regenerated was first characterized with a fibroblast adhesion and proliferation model. It showed that the Col‐regenerated had almost the same good biological activity as nature collagen, and this indicated the potential application of [EMIM][Ac] in tissue engineering. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 2245–2256, 2013     

Microwave assisted glycolysis of poly(ethylene terephthalate) catalyzed by 1‐butyl‐3‐methylimidazolium bromide ionic liquid

The combination of ionic liquid (IL) associated with microwave energy may have some potential application in the chemical recycling of poly (ethylene terephthalate). In this processes, glycolysis of waste poly (ethylene terephthalate) recovered from bottled water containers were thermally depolymerized with solvent ethylene glycol (EG) in the presence of 1‐butyl‐3‐methyl imidazolium bromide ([bmim]Br) as catalyst (IL) under microwave condition. It was found that the glycolysis products consist of bis (2‐hydroxyethyl) terephthalate (BHET) monomer that separated from the catalyst IL in pure crystalline form. The conversion of PET reach up to 100% and the yield of BHET reached 64% (wt %). The optimum performance was achieved by the use of 1‐butyl‐3‐methyl imidazolium bromide as a catalyst, microwave irradiations temperature (170–175°C) and reaction time 1.75–2 h. The main glycolysis products were analyzed by ¹H NMR, ¹³C NMR, LC‐MS, FTIR, DSC, and TGA. When compared to conventional heating methods, microwave irradiation during glycolysis of PET resulted in short reaction time and more control over the temperature. This has allowed substantial saving in energy and processing cost. In addition, a more efficient, environmental‐friendly, and economically feasible chemical recycling of waste PET was achieved in a significantly reduced reaction time. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41666.     

Molecularly imprinted polymers for the selective recognition of l‐phenylalanine based on 1‐buty‐3‐methylimidazolium ionic liquid

To enhance the affinity of 4‐vinyl pyridine to l ‐phenylalanine (l ‐Phe) and convert the imprinting process from the aqueous phase to the organic phase, an oil‐soluble amino acid ionic liquid was introduced as a template. In this study, 1‐butyl‐3‐methylimidazolium α‐aminohydrocinnamic acid salt was first applied to prepared surface molecularly imprinted polymers (MIPs) in acetonitrile for the selective recognition of l ‐Phe. Fluorescence quenching analysis of the functional monomer on the template was investigated under different conditions to study the imprinting mechanism. Several binding studies, such as the sorption kinetics, sorption thermodynamics, and solid‐phase extraction application, and the chiral resolution of racemic phenylalanine were investigated. The binding isotherms were fitted by nonlinear regression to the Freundlich model to investigate the recognition mechanism. The affinity distribution analysis revealed that polymers imprinted by ionic liquid showed higher homogeneous binding sites than those imprinted by l ‐Phe. The competition tests were conducted by a molecularly imprinting solid‐phase extraction procedure to estimate the selective separation properties of the MIPs for l ‐Phe. The target MIP was shown to be successfully for the separation of l ‐Phe from an amino acid mixture. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42485.     

Enantioselective Synthesis of 4H‐Pyrans Through Organocatalytic Asymmetric Formal [3+3] Cycloadditions of 2‐(1‐Alkynyl)‐2‐alken‐1‐ones with β‐Keto Esters

4H‐Pyran units are frequently present in molecules with significant biological and pharmaceutical activities. Herein, we present the first enantioselective formal [3+3] cycloaddition between 2‐(1‐alkynyl)‐2‐alken‐1‐ones and β‐keto esters catalyzed by a cyclohexyldiamine‐based thiourea‐tertiary amine bifunctional catalyst. Under the mild and eco‐friendly conditions, a wide range of polysubstituted 4H‐pyrans were obtained in moderate yields with good enantioselectivities.

     

Improved activity and stability of pseudomonas capaci lipase in a novel biocompatible ionic liquid, 1‐isobutyl‐3‐methylimidazolium hexafluorophosphate

BACKGROUND: Enzymes may exhibit enhanced activity, stability and selectivity in ionic liquids, depending on the properties of the liquid. The physical–chemical properties of ionic liquids, however, may be modified by altering the anion or cation in the ionic liquid. This feature is a key factor for realizing successful reactions. In this work, a new ionic liquid, 1‐isobutyl‐3‐methylimidazolium hexafluorophosphate (abbreviated as [i‐C₄mim][PF₆]), was synthesized and investigated as a novel medium for the transesterification reaction of 2‐phenylethanol with vinyl acetate catalyzed by pseudomonas capaci lipase. As contrasts, the reaction was also carried out in two reference solvents; the isomeric ionic liquid [i‐C₄mim][PF₆], 1‐butyl‐3‐methylimidazolium hexafluorophosphate (abbreviated as [C₄mim][PF₆]), and hexanes. RESULTS: As reaction medium, [i‐C₄mim][PF₆] was best among the three solvents. The initial reaction rate, the equilibrium conversion of 2‐phenylethanol and the half‐lifetime of the lipase in [i‐C₄mim][PF₆] medium were about 1.5, 1.2 and 3‐fold that obtained in [C₄mim][PF₆] medium, respectively. The lipase in [i‐C₄mim][PF₆] medium was recycled 10 times without substantial diminution in activity. CONCLUSION: The ionic liquid [i‐C₄mim][PF₆] has good biocompatibility, and can be used widely as green media in various biocatalysis reactions to improve the activity and stability of enzymes. Besides hydrophobicity and nucleophilicity, the spatial configuration of ionic liquids is also considered a key factor effecting the behaviour of the enzyme in ionic liquids. Copyright © 2008 Society of Chemical Industry     

Decrement of cellulose recalcitrance by treatment with ionic liquid (1‐ethyl‐3‐methylimidazolium acetate) as a strategy to enhance enzymatic hydrolysis

BACKGROUND: The high crystallinity of cellulose underlies the recalcitrance that this polymer presents in enzymatic degradation. Thus, a pre‐treatment step is applied in most bioconversion processes. Treatments with ionic liquids are considered an emerging pre‐treatment technology, owing to their high efficiency in solvating cellulose, over molecular solvent systems. RESULTS: Crystalline cellulose with and without ionic liquid (1‐ethyl‐3‐methylimidazolium acetate) treatment, both commercially available, were used as substrates in enzymatic hydrolysis reactions using the earlier evaluated cellulolytic system of Fusarium oxysporum. The in situ removal of the hydrolysate during reactions enhanced the reaction rate as well as the overall glucose production. Ionic liquid treatment significantly decreased cellulose crystallinity and enhanced bioconversion yields and rates. The effects of cellulose structural changes during treatment on hydrolysis rate were investigated and the recalcitrance constants were determined. CONCLUSION: The study showed that ionic liquid‐treated cellulose became more homogeneous and more easily degradable than the untreated cellulose, a conclusion that was expressed mathematically by the difference in the recalcitrance constants for the two substrates. It was concluded that glucose production from ionic liquid‐treated cellulose could achieve very high conversion yields in consolidated bioprocesses or during simultaneous saccharification and fermentation. Copyright © 2012 Society of Chemical Industry     

Dissolution and utilization of chitosan in a 1‐carboxymethyl‐3‐methylimidazolium hydrochloride ionic salt aqueous solution

1‐Carboxymethyl‐3‐methylimidazolium hydrochloride ([IMIM–COOH]Cl), a new ionic salt, is proposed as a green, promising solvent for dissolving chitosan. However, because of the optimal dosage of chitosan dissolved in [IMIM–COOH]Cl, a 12 wt % [IMIM–COOH]Cl aqueous solution was selected as an optimum solvent system for dissolving chitosan. The structures of the original and regenerated chitosan were characterized by Fourier transform infrared spectroscopy and X‐ray diffraction analysis. Scanning electron microscopy was used to visualize the morphological features of the reconstituted chitosan membranes. Meanwhile, the absorbance, tensile strength, and breaking elongation of the chitosan membranes were measured. The results reveal that 10–11 wt % was an optimal chitosan concentration for preparing membranes. Furthermore, the adsorption capacity for Cu(II) ion of the chitosan membranes was increased with the chitosan concentration decreased from 12 to 8 wt %. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41965.     

Emulsion polymerization of styrene with Iso‐octyl‐3‐mercaptopropionate as chain transfer agent

Four batch and unseeded emulsion polymerizations of styrene were investigated, which included isooctyl 3‐mercaptopropionate (iOMP) as chain transfer agent (CTA). This compound was analyzed by ¹³C NMR and GC/MS, resulting in a mixture of over 10 isomers. Because of different reactivities of the CTA isomers, the produced polystyrenes presented broad and bimodal molecular weight distributions (MWDs). A mathematical model was adjusted to the measurements, and the measured MWDs were adequately predicted when assuming the CTA as a binary mixture of high but different reactivities. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Automated Synthesis of (rac)‐, (R)‐, and (S)‐[18F]Epifluorohydrin and Their Application for Developing PET Radiotracers Containing a 3‐[18F]Fluoro‐2‐hydroxypropyl Moiety

To introduce the 3‐[¹⁸F]fluoro‐2‐hydroxypropyl moiety into positron emission tomography (PET) radiotracers, we performed automated synthesis of (rac)‐, (R)‐, and (S)‐[¹⁸F]epifluorohydrin ([¹⁸F] 1 ) by nucleophilic displacement of (rac)‐, (R)‐, or (S)‐glycidyl tosylate with ¹⁸F^? and purification by distillation. The ring‐opening reaction of (R)‐ or (S)‐[¹⁸F] 1 with phenol precursors gave enantioenriched [¹⁸F]fluoroalkylated products without racemisation. We then synthesised (rac)‐, (R)‐, and (S)‐ 2‐{5‐[4‐(3‐[¹⁸F]fluoro‐2‐hydroxypropoxy)phenyl]‐2‐oxobenzo[d]oxazol‐3(2H)‐yl}‐N‐methyl‐N‐phenylacetamide ([¹⁸F] 6 ) as novel radiotracers for the PET imaging of translocator protein (18 kDa) and showed that (R)‐ and (S)‐[¹⁸F] 6 had different radioactivity uptake in mouse bone and liver. Thus, (rac)‐, (R)‐, and (S)‐[¹⁸F] 1 are effective radiolabelling reagents and can be used to develop PET radiotracers by examining the effects of chirality on their in vitro binding affinities and in vivo behaviour.     

An investigation into the degree and rate of polymerization of poly(methyl methacrylate) in the ionic liquid 1‐butyl‐3‐methylimidazolium hexafluorophosphate

Room‐temperature ionic liquids (ILs), including 1‐butyl‐3‐methylimidazolium hexafluorophosphate, [bmim⁺][PF₆^?], were investigated as replacements for volatile organic compounds in the free‐radical solution polymerization of poly(methyl methacrylate) (PMMA). The latter was synthesized in benzene and [bmim⁺][PF₆^?] at 70 °C via a free‐radical process and the degree and rate of polymerization were compared based on the solvent used. The degree of polymerization was found to be five times higher in [bmim⁺][PF₆^?] than in benzene, while the rate of reaction was approximately four times faster in [bmim⁺][PF₆^?]. The results indicate the potential for using ILs to produce high‐molecular‐weight polymers and block structures based on the increased free‐radical stability in ILs. Copyright © 2004 Society of Chemical Industry