A new single‐phase high‐power‐factor converter with buck and buck–boost hybrid operation

In recent years, a wide variety of high‐power‐factor converter schemes have been proposed to solve the harmonic problem. The schemes are based on conventional boost, buck, or buck–boost topology, and their performance, such as output voltage control range in the boost and buck topology or efficiency in the buck–boost topology, is limited. To solve this, the authors propose a single‐phase high‐power‐factor converter with a new topology obtained from a combination of buck and buck–boost topology. The power stage performs the buck and buck–boost operations by a compact single‐stage converter circuit while the simple controller/modulator appropriately controls the alternation of the buck and buck–boost operation and maintains a high‐quality input current during both the buck and buck–boost operations. The proposed scheme results in a high‐performance rectifier with no limitation of output voltage control range and a high efficiency. In this paper, the principle and operation of the proposed converter scheme are described in detail and the theory is confirmed through experimental results obtained from 2‐kW prototype converter. © 2000 Scripta Technica, Electr Eng Jpn, 131(3): 91–100, 2000     

A single‐phase buck‐boost PFC converter with output‐voltage,ripple‐reducing operation

This paper describes a new single‐phase buck‐boost power‐factor‐correction (PFC) converter with output‐voltage, ripple reducing operation. The converter consists of a conventional buck‐boost PFC converter and an additional switch to obtain a freewheeling mode of the dc inductor current, and is operated by two modulators. The first modulator controls the buck‐boost switch to obtain PFC. The other modulator controls the square value of the instantaneous dc inductor current to perform the output‐voltage‐ripple‐reducing operation. In the two modulations, the time integral value of the input and output currents in each modulation period are controlled directly and indirectly, respectively. Thus, modulation errors or undesirable distortions of the input current and output voltage ripple are eliminated even if the dc inductor current produces large ripple in a low‐frequency range. The theories and combination techniques for the two modulators, implementation, and experimental results are described. © 1998 Scripta Technica, Electr Eng Jpn, 126(2): 56–70, 1999     

一种新型高效率独立逆变电源的研究

针对低压大电流输入的独立式逆变电源系统,提出了一种中间直流母线电压不固定的电路结构。该逆变电源前级采用一种占空比不调制的LCL谐振软开关推挽式DC-DC变换器,串联的后级采用单极性调制的全桥DC-AC变换器。详细分析了前级谐振型DC-DC电路的工作原理。针对中间母线电压不调制的特点,提出了一种干扰抵消的后级DC-AC电路的控制方案。制作并测试了一台220VAC输出的1kW逆变器,在额定状态下效率大于90％,输出电压调整率也达到要求。     

A new topology for nonisolated multiport zero voltage switching dc‐dc converter

In this paper, a new multiport zero voltage switching dc‐dc converter is proposed. Multiport dc‐dc converters are widely applicable in hybrid energy generating systems to provide substantial power to sensitive loads. The proposed topology can operate in 3 operational modes of boost, buck, and buck‐boost. Moreover, it has zero voltage switching operation for all switches and has the ability to eliminate the input current ripple; also, at low voltage side, the input sources can be extended. In addition, it has the ability of interfacing 3 different voltages only by using 3 switches. In this paper, the proposed topology is analyzed theoretically for all operating modes; besides, the voltage and current equations of all components are calculated. Furthermore, the required soft switching and zero input currents ripple conditions are analyzed. Finally, to demonstrate the accurate performance of the proposed converter, the Power System Computer Aided Design(PSCAD)/Electro Magnetic Transient Design and Control(EMTDC) simulation and experimental results are extracted and presented.     

A new fast‐response buck converter using accelerated pulse‐width‐modulation techniques

A new fast‐response buck converter using accelerated pulse‐width‐modulation techniques is proposed in this article. The benefits of the accelerated pulse‐width‐modulation technique is fast‐transient response, simple‐compensation design, and no requirement for slope compensation; furthermore, some power management problems are minimized, such as EMI (Electro Magnetic Interference), size, design complexity, and cost. The traditional voltage‐mode speed is slower with the transient response, so an accelerated pulse‐width‐modulation technique is used to solve the problem of slowed transient response in this article. The proposed buck converter has excellent conversion efficiency with a wide load conditions. The proposed buck converter has been fabricated with TSMC 0.35 µm CMOS 2P4M processes, and the total chip area is 1.32 × 1.22 mm². Maximum output current is 300 mA when the output voltage equals 1.8 V. When the supply voltage is 3.6 V, the output voltage can be 1–2.6 V. Maximum transient response is less than 5 µs. The simulation and experimental results are presented in this article. Copyright © 2011 John Wiley & Sons, Ltd.     

Highly Efficient dc–dc Transformer Based on Multicell Converter Topology for Next Generation dc Distribution System

A multicell dc–dc transformer (DCX) with an efficiency of 98.0% is developed for a next generation dc distribution system. Input series output parallel (ISOP) and input parallel output series (IPOS) connection topologies of highly efficient dc–dc cell converters have been applied to realize DCXs that have arbitrary I/O voltages and a high transfer factor. The behavior of a DCX based on multicell topology using nonregulated dc–dc converters is analyzed, and the voltage stress in each cell converter is discussed quantitatively considering the variation in converter circuit parameters. Further, the availability of the applied topology and the validity of the analysis are confirmed by fabricating a prototype of a 384 V to 12 V 2400 W DCX. The multicell topology contributes to realizing a low‐carbon society pushing the promotion of highly efficient, space‐saving, and low cost dc power supplies with standardized, highly efficient cell converter modules.     

基于GaN器件Buck电路死区功耗分析与优化

氮化镓功率器件以其优异的高速、高效特性而有望在电源转换领域取得广泛应用。在Buck开关电源应用中,系统采用GaN HEMT替换传统Si功率器件后,系统死区损耗成为阻碍系统效率提升的一个重要因素。针对GaN器件的电源转换系统死区功耗展开理论及仿真讨论,详细分析Si功率器件与GaN HEMT在buck型开关电源系统中不同的工作机制以及死区时间对系统功耗的影响。优化结果表明,输入电压为12 V、输出电压为1.2 V、开关频率为700 k Hz的GaN基电源转换系统,在死区时间Td1=20 ns、Td2=0 ns、负载电流为20 A的情况下系统转换效率可达到92%。     

Design of robust digitally controlled DC–DC converters in the presence of strong interference

One of the main advantages of digital control is the ability to design more sophisticated control strategies to enable high‐performance dc–dc converters. One such example is a buck converter operating with a digital state‐feedback controller. Previous works characterise the nonlinear dynamics of such systems under ideal operating conditions. However, in practical applications, these conditions cannot be guaranteed. The focus of this work is on the behaviour of such systems when they operate in the presence of strong interference signals. Previous works on the effect of noise have shown that intermittent operation is possible when the frequency of the noise signal is close to the switching frequency. Intermittent operation can be characterised by long periods of stable operation interspersed with periods of unstable or chaotic operation, which greatly downgrade the efficiency and performance of the converter and reduce its lifetime as for example increase the current ripple or add extra AC components at its output. Typically, such behaviour is avoided by modifying the circuit parameters. However, little or no work exists on developing design guidelines in order to effect its elimination. This is the focus of this research, that is, by utilising Filippov's theory on discontinuous differential equations, to set out a design procedure that can be applied to any dc–dc converter, to tune its controller in order to eliminate intermittent operation. As a case study, the digitally controlled buck converter with a state‐feedback control law is selected. Copyright © 2017 John Wiley & Sons, Ltd.     

Performance analysis and calculation of critical inductance and output voltage ripple of a simple non‐isolated multi‐input bidirectional DC‐DC converter

In this paper, a simple non‐isolated multiple input (MI) bidirectional DC‐DC topology is proposed which can operate in buck, boost, or buck‐boost modes. The proposed topology utilizes a battery pack to realize the bidirectional power flow operation especially when the input sources are non‐storable ones. The excess energy of input sources can be stored in the battery and be injected to the load, when required. Simultaneous or independent power transfer of input sources is also provided. For better evaluation, the proposed topology has been compared with several recently presented novel topologies, from view point of number of inductors, capacitors, switches, and diodes. Comparison results show that the proposed topology utilizes less number of components (switches, inductors, capacitors, and current sensors) which can reduce the size, cost, and complexity of converter. Different operational modes of the proposed topology (unidirectional buck, boost, buck‐boost modes, and bidirectional mode) have been presented. Also, boost mode of the proposed topology has been investigated in detail, from design point of view, and generalized relationships have been proposed for calculation of critical inductance (CI) and output voltage ripple (OVR) of proposed n‐input boost topology. To validate proposed theoretical concepts, the proposed topology has been modeled and simulated in PSCAD/EMTDC software, and the 3‐input boost version has been experimentally implemented. Simulation and experimental results confirm appropriate performance of the proposed topology.     

Single‐stage single‐switch PFC converter for wide‐input extreme step‐down voltage applications

This paper presents a new single‐stage single‐switch high power factor correction AC/DC converter suitable for low‐power applications (< 150 W) with a universal input voltage range (90–265 V_rms). The proposed topology integrates a buck–boost input current shaper followed by a buck and a buck–boost converter, respectively. As a result, the proposed converter can operate with larger duty cycles compared with the existing single‐stage single‐switch topologies, hence, making them suitable for extreme step‐down voltage conversion applications. Several desirable features are gained when the three integrated converter cells operate in discontinuous conduction mode. These features include low semiconductor voltage stress, zero‐current switch at turn‐on, and simple control with a fast well‐regulated output voltage. A detailed circuit analysis is performed to derive the design equations. The theoretical analysis and effectiveness of the proposed approach are confirmed by experimental results obtained from a 100‐W/24‐V_dc laboratory prototype. Copyright © 2011 John Wiley & Sons, Ltd.     

Unified Pulse‐Width Modulation Scheme for Improved Digital‐Peak‐Voltage Control of Switching DC‐DC Converters

Contrast to conventional dependent double‐edge (DDE) pulse‐width modulation (PWM), independent double‐edge (IDE) PWM is investigated and applied to the control of switching dc‐dc converters, with improved digital‐peak‐voltage (IDPV) controlled buck converter in this paper. IDE modulation unifies all the PWM schemes reported up to now and is thus called as unified PWM. It is revealed that conventional trailing‐edge, leading‐edge, trailing‐triangle, and leading‐triangle modulations are special cases of IDE modulation. The control laws of IDPV controlled buck converter with IDE modulation are investigated and compared with those of IDPV with DDE modulation. Their stabilities and robustness are analyzed subsequently. Digital implementation of the unified PWM is also carried out. Steady‐state and transient performances of IDPV controlled buck converters with IDE modulation and DDE modulation are compared and verified by experimental results. It is concluded that steady‐state and transient performances of IDPV with IDE are better than those of IDPV with DDE modulation. Copyright © 2012 John Wiley & Sons, Ltd.     

High‐power‐factor single‐switch AC to DC converter for LED lighting

In this paper, we report a novel single‐switch AC to DC step‐down converter suitable for light emitting diodes. The proposed topology has a buck and a buck–boost converter. The circuit is designed to operate in the discontinuous conduction mode in order to improve the power factor. In this topology, a part of the input power is connected to the load directly. This feature of the proposed topology increases the efficiency of power conversion, improves the input power factor, produces less voltage stress on intermediate stages, and reduces the output voltage in the absence of a step‐down transformer. The theoretical analysis, design procedure, and performance of the proposed converter are verified by simulation and experiment. A 36 V, 60 W prototype has been built to demonstrate the merits of this circuit. © 2017 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Modeling and simulation of ac–dc buck-boost converter fed dc motor with uniform PWM technique

PWM controlled rectifiers can efficiently and economically be employed in low and medium power applications of dc drives and in front-end converters of rectifier–inverter systems while maintaining the advantages of design simplicity and operation reliability of naturally commutated schemes. Due to the high dc voltage that is produced which is greater than the peak voltage of the utility supply, the ac–dc buck-boost converter is especially suited as a front-end power source in variable-speed drive systems to convert the utility supply voltage into a variable dc link voltage where a single-phase or a three-phase utilities power supply is available. In this paper, the dynamic model and steady state equivalent circuit of a single-phase ac–dc buck-boost converter fed dc motor with uniform PWM control is presented. The waveforms of voltage and current, the input and output characteristics of the converter are discussed and verified. Measured, computed and simulated results are shown to be very close and the model is proved to be efficient and accurate.     

Analysis and control of a buck DC-DC converter operating with constant power load in sea and undersea vehicles

Power-electronics-based zonal direct current (dc) power distribution systems are being considered for sea and undersea vehicles. The stability of the dc power-electronics-based power distribution systems is a significant design consideration because of the potential for negative-impedance-induced instabilities. In this paper, the dynamic properties and control of a buck converter feeding a downstream dc-dc converter are studied. The controller in this system combines an instantaneous current feedback loop using hysteresis with a proportional-integral (PI) algorithm to regulate the output voltage of the converter. Based on a large-signal-averaged model of the converter, the stability-in-large around the operation point is presented. The complete analysis is carried out considering a buck dc-dc converter operating with a constant power load (CPL). Simulations and experimental results are provided to verify the analysis.     

Multistage multiphase switched‐capacitor DC–DC converter with variable‐phase and PWM control

A closed‐loop multistage multiphase switched‐capacitor converter (n‐stage p‐phase MPSC) is proposed with a variable‐phase control (VPC) and a pulse‐width‐modulation (PWM) technique for low‐power step‐up conversion and high‐efficiency regulation. In this n‐stage MPSC, n voltage doublers are connected in series for boosting the voltage gain up to 2ⁿ at most. Here, VPC is suggested to realize a variable multiphase operation by changing the phase number p and topological path for the more suitable level of voltage gain so as to improve the power efficiency, especially for the lower output voltage Besides, PWM is adopted not only to enhance output regulation for different desired outputs, but also to reinforce output robustness to source/loading variation. Further, some theoretical analyses and designs include: n‐stage p‐phase MPSC model, steady‐state analysis, conversion ratio, power efficiency, output ripple, stability, capacitance selection, and control design. Finally, the closed‐loop MPSC is simulated, and the hardware is implemented and tested. All the results are illustrated to show the efficacy of the proposed scheme. Copyright © 2011 John Wiley & Sons, Ltd.     

A single‐stage integrated bridgeless AC/DC converter for electrolytic capacitor‐less LED lighting applications

In this paper, a single‐stage integrated bridgeless AC/DC converter is proposed. As compared to its counterpart that is composed of totem‐pole boost power factor correction (PFC) cascade fly‐back DC/DC converter, the studied circuit has less components number while overcoming the limits of the totem‐pole type. Thus, it is suitable to the low‐power LED lighting applications. Furthermore, when both PFC inductors L_b and magmatic inductance L_m of the transformer TR1 operate at discontinuous current mode, the bus voltage v_CB can be used to decouple the ac input and constant dc output power. Thus, the approach of increasing bus voltage ripple is employed to eliminate electrolytic capacitors and obtain long operation lifetime. Additionally, it is able to be compatible with our studied twin‐bus configuration for increasing the overall efficiency. A 50‐W hardware prototype has been designed, fabricated, and tested in the laboratory to verify the proposed converter validity. Copyright © 2014 John Wiley & Sons, Ltd.     

The Proposal of Isolated Single‐Stage AC‐DC Converter

An isolated ac‐dc converter has been used in various applications, such as power supply and as a battery charger for electric vehicle. In conventional converters, a loss in each conversion stage can be reduced by applying a soft switching method. However, a conventional converter has many conversion stages including the rectifier stage, power factor correction, and dc/dc converter stages; thus, it is difficult to reduce the total converter loss and size. In this paper, we propose a novel isolated‐type ac‐dc converter with only one conversion stage; it can realize a zero‐voltage switching operation in all switching devices.     

A novel active‐clamp zero‐voltage‐switching buck‐boost converter

An active‐clamp zero‐voltage‐switching (ZVS) buck‐boost converter is proposed in this paper to improve the performance of converter in light load condition. By employing a small resonant inductor, the ZVS range of switches could be adjusted to very light load condition. Moreover, 2 clamping capacitors are added in the converter to eliminate the voltage spike on the switches during transition. The operating principle of the proposed converter is analyzed, and the optimal design guide for full range ZVS is also provided. A 60‐W output prototype is experimentally built and tested in laboratory to verify the feasibility of proposed converter. The measured results show the critical ZVS operation of power switches at 1 and 0.7‐W output power for buck and boost mode, respectively. The peak conversion efficiency is up to 92.3%.     

Improved control‐to‐output characteristics of a PWM buck‐boost converter

An indirect control variable for improving the control‐to‐output characteristics of a Pulse Width Modulation (PWM) buck‐boost converter is introduced in this letter. The voltage gain and the small‐signal model of the buck‐boost converter are reviewed. The actual voltage command at one input of the PWM comparator is from the proposed indirect control variable and the peak value of the high‐frequency PWM carrier. The resulted voltage gain function appears proportional to this indirect control command. Also the dependence of the DC gain of the control‐to‐output transfer function on the duty cycle is eliminated. Experimental results conform well to the theoretical analysis. Copyright © 2010 John Wiley & Sons, Ltd.