Molecular-scale characterization of uranium sorption by bone apatite materials for a permeable reactive barrier demonstration

Uranium binding to bone charcoal and bone meal apatite materials was investigated using U L(III)-edge EXAFS spectroscopy and synchrotron source XRD measurements of laboratory batch preparations in the absence and presence of dissolved carbonate. Pelletized bone char apatite recovered from a permeable reactive barrier (PRB) at Fry Canyon, UT, was also studied. EXAFS analyses indicate that U(VI) sorption in the absence of dissolved carbonate occurred by surface complexation of U(VI) for sorbed concentrations < or = 5500 microg U(VI)/g for all materials with the exception of crushed bone char pellets. Either a split or a disordered equatorial oxygen shell was observed, consistent with complexation of uranyl by the apatite surface. A second shell of atoms at a distance of 2.9 A was required to fit the spectra of samples prepared in the presence of dissolved carbonate (4.8 mM total) and is interpreted as formation of ternary carbonate complexes with sorbed U(VI). A U-P distance at 3.5-3.6 A was found for most samples under conditions where uranyl phosphate phases did not form, which is consistent with monodentate coordination of uranyl by phosphate groups in the apatite surface. At sorbed concentrations > or = 5500 microg U(VI)/g in the absence of dissolved carbonate, formation of the uranyl phosphate solid phase, chernikovite, was observed. The presence of dissolved carbonate (4.8 mM total) suppressed the formation of chernikovite, which was not detected even with sorbed U(VI) up to 12,300 microg U(VI)/g in batch samples of bone meal, bone charcoal, and reagent-grade hydroxyapatite. EXAFS spectra of bone char samples recovered from the Fry Canyon PRB were comparable to laboratory samples in the presence of dissolved carbonate where U(VI) sorption occurred by surface complexation. Our findings demonstrate that uranium uptake by bone apatite will probably occur by surface complexation instead of precipitation of uranyl phosphate phases under the groundwater conditions found at many U-contaminated sites.     

Extraction of oxidized and reduced forms of uranium from contaminated soils: effects of carbonate concentration and pH

Uranium may present in soil as precipitated, sorbed, complexed, and reduced forms, which impact its mobility and fate in the subsurface soil environment. In this study, a uranium-contaminated soil was extracted with carbonate/ bicarbonate at varying concentrations (0-1 M), pHs, and redox conditions in an attempt to evaluate their effects on the extraction efficiency and selectivity for various forms of uranium in the soil. Results indicate that at least three differentforms of uranium existed in the contaminated soil: uranium(VI) phosphate minerals, reduced U(IV) phases, and U(VI) complexed with soil organic matter. A small fraction of U(VI) could be sorbed onto soil minerals. The mechanism involved in the leaching of U(VI) by carbonates appears to involve three processes which may act concurrently or independently: the dissolution of uranium(VI) phosphate and other mineral phases, the oxidation-complexation of U(IV) under oxic conditions, and the desorption of U(VI)-organic matter complexes at elevated pH conditions. This study suggests that, depending on site-specific geochemical conditions, the presence of small quantities of carbonate/bicarbonate could result in a rapid and greatly increased leaching and the mobilization of U(VI) from the contaminated soil. Even the reduced U(IV) phases (only sparingly soluble in water) are subjected to rapid oxidation and therefore potential leaching into the environment.     

Molecular-scale structure of uranium(VI) immobilized with goethite and phosphate

The molecular-scale immobilization mechanisms of uranium uptake in the presence of phosphate and goethite were examined by extended X-ray absorption fine structure (EXAFS) spectroscopy. Wet chemistry data from U(VI)-equilibrated goethite suspensions at pH 4-7 in the presence of ~100 μM total phosphate indicated changes in U(VI) uptake mechanisms from adsorption to precipitation with increasing total uranium concentrations and with increasing pH. EXAFS analysis revealed that the precipitated U(VI) had a structure consistent with the meta-autunite group of solids. The adsorbed U(VI), in the absence of phosphate at pH 4-7, formed bidentate edge-sharing, ≡ Fe(OH)(2)UO(2), and bidentate corner-sharing, (≡ FeOH)(2)UO(2), surface complexes with respective U-Fe coordination distances of ~3.45 and ~4.3 ?. In the presence of phosphate and goethite, the relative amounts of precipitated and adsorbed U(VI) were quantified using linear combinations of the EXAFS spectra of precipitated U(VI) and phosphate-free adsorbed U(VI). A U(VI)-phosphate-Fe(III) oxide ternary surface complex is suggested as the dominant species at pH 4 and total U(VI) of 10 μM or less on the basis of the linear combination fitting, a P shell indicated by EXAFS, and the simultaneous enhancement of U(VI) and phosphate uptake on goethite. A structural model for the ternary surface complex was proposed that included a single phosphate shell at ~3.6 ? (U-P) and a single iron shell at ~4.3 ? (U-Fe). While the data can be explained by a U-bridging ternary surface complex, (≡ FeO)(2)UO(2)PO(4), it is not possible to statistically distinguish this scenario from one with P-bridging complexes also present.     

TRLFS evidence for precipitation of uranyl phosphate on the surface of alumina: environmental implications

We studied the ligand-enhanced sorption of uranyl ions (1-12 μM) on α-alumina colloids suspended in (and pre-equilibrated with) solutions at various concentrations of phosphate ions (P(T) = 0-900 μM). A highly sensitive technique, time resolved laser-induced fluorescence spectroscopy (TRLFS), was used to examine the chemical speciation of uranyl sorbed at trace concentrations (0.4-4 μmol U·g?1). The suspensions with P(T) ≥ 100 μM exhibited high uranyl adsorption, and a very high intensity of fluorescence that increased with the sorbed amounts of phosphate and uranyl. These samples exhibited similar spectral and temporal characteristics of fluorescence emission, evidencing a uniform speciation pattern and a single coordination environment for sorbed U, despite large variation in parameters such as aqueous uranyl speciation, U loading, and extent of coverage of alumina by secondary Al phosphates precipitating on the surface. The results pointed formation of surface precipitates of uranyl phosphates, which are characterized by high quantum yield, peak maxima at positions similar to those of U(VI) phosphate minerals and four lifetimes indicating distortions, in-homogeneities or varying number of water molecules in the lattice. The findings have major implications for our understanding of the mechanisms of immobilization of U at trace levels on surfaces of oxides submitted to phosphated solutions in soils with low pH.     

Changes in uranium speciation through a depth sequence of contaminated Hanford sediments

The disposal of basic sodium aluminate and acidic U(VI)-Cu(ll) wastes in the now-dry North and South 300 A Process Ponds atthe Hanford site resulted in a groundwater plume of U(VI). To gain insight into the geochemical processes that occurred during waste disposal and those affecting the current and future fate and transport of this uranium plume, the solid-phase speciation of uranium in a depth sequence of sediments from the base of the North Process Pond through the vadose zone to groundwater was investigated using standard chemical and mineralogical analyses, electron and X-ray microprobe measurements, and X-ray absorption fine structure spectroscopy. Near-surface sediments contained uranium coprecipitated with calcite, which formed due to overneutralization of the waste ponds with base (NaOH). At intermediate depths in the vadose zone, metatorbernite [Cu(UO2PO4)2 x 8H2O] precipitated, likely during pond operations. Uranium occurred predominantly sorbed onto phyllosilicates in the deeper vadose zone and groundwater; sorbed uranium was also an important component at intermediate depths. Since the calcite-bearing pond sediments have been removed in remediation efforts, uranium fate and transport will be controlled primarily by desorption of the sorbed uranium and dissolution of metatorbernite.     

Kinetics of uranium(VI) reduction by hydrogen sulfide in anoxic aqueous systems

Aqueous U(VI) reduction by hydrogen sulfide was investigated by batch experiments and speciation modeling; product analysis by transmission electron microscopy (TEM) was also performed. The molar ratio of U(VI) reduced to sulfide consumed, and the TEM result suggested that the reaction stoichiometry could be best represented by UO2(2+) + HS- = UO2+ S* + H+. At pH 6.89 and total carbonate concentration ([CO32-]T) of 4.0 mM, the reaction took place according to the following kinetics: -d[U(VI)]/dt = 0.0103[U(VI)][S2-]T0.54 where [U(VI)] is the concentration of hexavalent uranium, and [S2-]T is the total concentration of sulfide. The kinetics of U(VI) reduction was found to be largely controlled by [CO32-]T (examined from 0.0 to 30.0 mM) and pH (examined from 6.37 to 9.06). The reduction was almost completely inhibited with the following [CO32-]T and pH combinations: [(> or = 15.0 mM, pH 6.89); (> or = 4.0 mM, pH 8.01); and (> or = 2.0 mM, pH 9.06)]. By comparing the experimental results with the calculated speciation of U(VI), it was found that there was a strong correlation between the measured initial reaction rates and the calculated total concentrations of uranium-hydroxyl species; we, therefore, concluded that uranium-hydroxyl species were the ones being reduced by sulfide, not the dominant U-carbonate species present in many carbonate-containing systems.     

Uranium biomineralization as a result of bacterial phosphatase activity: insights from bacterial isolates from a contaminated subsurface

Uranium contamination is an environmental concern at the Department of Energy's Field Research Center in Oak Ridge, Tennessee. In this study, we investigated whether phosphate biomineralization, or the aerobic precipitation of U(VI)-phosphate phases facilitated by the enzymatic activities of microorganisms, offers an alternative to the more extensively studied anaerobic U(VI) bioreduction. Three heterotrophic bacteria isolated from FRC soils were studied for their ability to grow and liberate phosphate in the presence of U(VI) and an organophosphate between pH 4.5 and 7.0. The objectives were to determine whether the strains hydrolyzed sufficient phosphate to precipitate uranium, to determine whether low pH might have an effect on U(VI) precipitation, and to identify the uranium solid phase formed during biomineralization. Two bacterial strains hydrolyzed sufficient organophosphate to precipitate 7395% total uranium after 120 h of incubation in simulated groundwater. The highest rates of uranium precipitation and phosphatase activity were observed between pH 5.0 and 7.0. EXAFS spectra identified the uranyl phosphate precipitate as an autunite/meta-autunite group mineral. The results of this study indicate that aerobic heterotrophic bacteria within a uranium-contaminated environment that can hydrolyze organophosphate, especially in low pH conditions, may play an important role in the bioremediation of uranium.     

Arsenate adsorption mechanisms at the allophane-water interface

We investigated arsenate (As(V)) reactivity and surface speciation on amorphous aluminosilicate mineral (synthetic allophane) surfaces using batch adsorption experiments, powder X-ray diffraction (XRD), and X-ray absorption spectroscopy (XAS). The adsorption isotherm experiments indicated that As(V) uptake increased with increasing [As-(V)]0 from 50 to 1000 microM (i.e., Langmuir type adsorption isotherm) and that the total As adsorption slightly decreased with increasing NaCl concentrations from 0.01 to 0.1 M. Arsenate adsorption was initially (0-10 h) rapid followed by a slow continuum uptake, and the adsorption processes reached the steady state after 720 h. X-ray absorption spectroscopic analyses suggest that As(V) predominantly forms bidentate binuclear surface species on aluminum octahedral structures, and these species are stable up to 11 months. Solubility calculations and powder XRD analyses indicate no evidence of crystalline Al-As(V) precipitates in the experimental systems. Overall, macroscopic and spectroscopic evidence suggest that the As(V) adsorption mechanisms at the allophane-water interface are attributable to ligand exchange reactions between As-(V) and surface-coordinated water molecules and hydroxyl and silicate ions. The research findings imply that dissolved tetrahedral oxyanions (e.g., H2PO42- and H2AsO4(2-)) are readily retained on amorphous aluminosilicate minerals in aquifer and soils at near neutral pH. The inner-sphere adsorption mechanisms might be important in controlling dissolved arsenate and phosphate in amorphous aluminosilicate-rich low-temperature geochemical environments.     

Sorption and desorption of perchlorate and U(VI) by strong-base anion-exchange resins

This study investigated the sorption affinity and capacity of six strong-base anion-exchange (SBA) resins for both uranium [U(VI)] and perchlorate (ClO4-) in simulated groundwater containing varying concentrations of sulfate (SO4(2-)). Additionally, desorption of U(VI) from spent resins was studied to separate U(VI) from resins with sorbed ClO4- for waste segregation and minimization. Results indicate that all SBA resins investigated in this study strongly sorb U(VI). The gel-type polyacrylic resin (Purolite A850) showed the highest sorption affinity and capacityfor U(VI) butwasthe least effective in sorbing ClO4-. The presence of SO4(2-) had little impact on the sorption of U(VI) but significantly affected the sorption of ClO4-, particularly on monofunctional SBA resins. A dilute acid wash was found to be effective in desorbing U(VI) but ineffective in desorbing ClO4- from bifunctional resins (Purolite A530E and WBR109). A single wash removed approximately 75% of sorbed U(VI) but only approximately 0.1% of sorbed ClO4- from the bifunctional resins. On the other hand, only 21.4% of sorbed U(VI) but approximately 34% of sorbed ClO4- was desorbed from the Purolite A850 resin. This study concludes that bifunctional resins could be used effectively to treatwater contaminated with ClO4- and traces of U(VI), and dilute acid washes could minimize hazardous wastes by separating sorbed U(VI) from ClO4- prior to the regeneration of the spent resin loaded with ClO4-.     

Uranium(VI) reduction by iron(II) monosulfide mackinawite

Reaction of aqueous uranium(VI) with iron(II) monosulfide mackinawite in an O(2) and CO(2) free model system was studied by batch uptake measurements, equilibrium modeling, and L(III) edge U X-ray absorption spectroscopy (XAS). Batch uptake measurements showed that U(VI) removal was almost complete over the wide pH range between 5 and 11 at the initial U(VI) concentration of 5 × 10(-5) M. Extraction by a carbonate/bicarbonate solution indicated that most of the U(VI) removed from solution was reduced to nonextractable U(IV). Equilibrium modeling using Visual MINTEQ suggested that U was in equilibrium with uraninite under the experimental conditions. X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) spectroscopy showed that the U(IV) phase associated with mackinawite was uraninite. Oxidation experiments with dissolved O(2) were performed by injecting air into the sealed reaction bottles containing mackinawite samples reacted with U(VI). Dissolved U measurement and XAS confirmed that the uraninite formed from the U(VI) reduction by mackinawite did not oxidize or dissolve under the experimental conditions. This study shows that redox reactions between U(VI) and mackinawite may occur to a significant extent, implying an important role of the ferrous sulfide mineral in the redox cycling of U under sulfate reducing conditions. This study also shows that the presence of mackinawite protects uraninite from oxidation by dissolved O(2). The findings of this study suggest that uraninite formation by abiotic reduction by the iron sulfide mineral under low temperature conditions is an important process in the redistribution and sequestration of U in the subsurface environments at U contaminated sites.     

Uptake and reduction of Cr(VI) to Cr(III) by mesquite (Prosopis spp.): chromate-plant interaction in hydroponics and solid media studied using XAS

Chromium (Cr) is a well-established carcinogen that is a contaminant at half of the EPA Superfund sites in the United States. Two separate studies were performed to investigate the possibility that mesquite (Prosopis spp.), which is an indigenous desert plant species, can remove Cr from the environment via active transport systems to the aerial portions of the plant. The first study was performed by growing mesquite on solid media (agar) at Cr(VI) concentrations of 75 and 125 ppm. The accumulation found in the leaves under the present conditions indicated that mesquite could be classified as a hyperaccumulator of chromium. The second study was conducted to investigate the differences between the type of Cr ligand involved in Cr uptake with agar and hydroponic cultures. We used X-ray absorption spectroscopy (XAS) to determine the mechanisms involved in the uptake and binding of Cr(VI) in live mesquite tissue. The XAS results for this study showed that some of the supplied Cr(VI) was uptaken by the mesquite roots; however, the data analyses of the plant tissues demonstrated that it was fully reduced to Cr(III) in the leaf tissues. Experiments are currently being performed to evaluate the behavior of the Mesquite plant using lower Cr concentrations.     

Chemical reduction of U(VI) by Fe(II) at the solid-water interface using natural and synthetic Fe(III) oxides

Abiotic reduction of 0.1 mM U(VI) by Fe(II) in the presence of synthetic iron oxides (biogenic magnetite, goethite, and hematite) and natural Fe(III) oxide-containing solids was investigated in pH 6.8 artificial groundwater containing 10 mM NaHCO3. In most experiments, more than 95% of added U(VI) was sorbed to solids. U(VI) was rapidly and extensively (> or = 80%) reduced in the presence of synthetic Fe(III) oxides and highly Fe(II) oxide-enriched (18-35 wt % Fe) Atlantic coastal plain sediments. In contrast, long-term (20-60 d) U(VI) reduction was less than 30% in suspensions of six other natural solids with relatively low Fe(III) oxide content (1-5 wt % Fe). Fe(II) sorption site density was severalfold lower on these natural solids (0.2-1.1 Fe(II) nm(-2)) compared tothe synthetic Fe(lII) oxides (1.6-3.2 Fe(II) nm(-2)), which may explain the poor U(VI) reduction in the natural solid-containing systems. Addition of the reduced form of the electron shuttling compound anthrahydroquinone-2,6-disulfonate (AH2DS; final concentration 2.5 mM) to the natural solid suspensions enhanced the rate and extent of U(VI) reduction, suggesting that AH2DS reduced U(VI) at surface sites where reaction of U(VI) with sorbed Fe(II) was limited. This study demonstrates that abiotic, Fe(II)-driven U(VI) reduction is likely to be less efficient in natural soils and sediments than would be inferred from studies with synthetic Fe(III) oxides.     

Cryogenic laser induced U(VI) fluorescence studies of a U(VI) substituted natural calcite: implications to U(VI) speciation in contaminated Hanford sediments

Time-resolved laser-induced fluorescence spectroscopy (TRLFS) and imaging spectromicroscopy (TRLFISM) were used to examine the chemical speciation of uranyl in contaminated subsurface sediments from the U.S. Department of Energy (U.S. DOE) Hanford Site, Washington. Spectroscopic measurements for contaminant U(VI) were compared to those from a natural, uranyl-bearing calcite (NUC) that had been found via X-ray absorption spectroscopy (XAS) to include uranyl in the same coordination environment as calcium. Spectral deconvolution of TRLFS measurements on the NUC revealed the unexpected presence of two distinct chemical environments consistent with published spectra of U(VI)-substituted synthetic calcite and aragonite. Apparently, some U(VI) substitution sites in calcite distorted to exhibit a local, more energetically favorable aragonite structure. TRLFS measurements of the Hanford sediments NP4-1 and NP1-6 were similar to the NUC in terms of peak positions and intensity, despite a small CaCO3 content (1.0 to 3.2 mass %). Spectral deconvolution of the sediments revealed the presence of U(VI) in calcite and aragonite structural environments. A third, unidentified U(VI) species was also present in the NP1-6 sediment. TRLFISM measurements at multiple locations in the different sediments displayed only minor variation, indicating a uniform speciation pattern. Collectively, the measurements implied that waste U(VI), long-resident beneath the sampled disposal pond (32 y), had coprecipitated within carbonates. These findings have major implications for the solubility and fate of contaminant U(VI).     

Quantitative separation of monomeric U(IV) from UO2 in products of U(VI) reduction

The reduction of soluble hexavalent uranium to tetravalent uranium can be catalyzed by bacteria and minerals. The end-product of this reduction is often the mineral uraninite, which was long assumed to be the only product of U(VI) reduction. However, recent studies report the formation of other species including an adsorbed U(IV) species, operationally referred to as monomeric U(IV). The discovery of monomeric U(IV) is important because the species is likely to be more labile and more susceptible to reoxidation than uraninite. Because there is a need to distinguish between these two U(IV) species, we propose here a wet chemical method of differentiating monomeric U(IV) from uraninite in environmental samples. To calibrate the method, U(IV) was extracted from known mixtures of uraninite and monomeric U(IV) and tested using X-ray absorption spectroscopy (XAS). Monomeric U(IV) was efficiently removed from biomass and Fe(II)-bearing phases by bicarbonate extraction, without affecting uraninite stability. After confirming that the method effectively separates monomeric U(IV) and uraninite, it is further evaluated for a system containing those reduced U species and adsorbed U(VI). The method provides a rapid complement, and in some cases alternative, to XAS analyses for quantifying monomeric U(IV), uraninite, and adsorbed U(VI) species in environmental samples.     

Microbial reduction of U(VI) at the solid-water interface

Microbial (Geobacter sulfurreducens) reduction of 0.1 mM U(VI) in the presence of synthetic Fe(III) oxides and natural Fe(III) oxide-containing solids was investigated in pH 6.8 artificial groundwater containing 10 mM NaHCO3. In most experiments, more than 95% of added U(VI) was sorbed to solids, so that U(VI) reduction was governed by reactions at the solid-water interface. The rate and extent of reduction of U(VI) associated with surfaces of synthetic Fe(III) oxides (hydrous ferric oxide, goethite, and hematite) was comparable to that observed during reduction of aqueous U(VI). In contrast, microbial reduction of U(VI) sorbed to several different natural Fe(III) oxide-containing solids was slower and less extensive compared to synthetic Fe(III) oxide systems. Addition of the electron shuttling agent anthraquinone-2,6-disulfonate (AQDS; 0.1 mM) enhanced the rate and extent of both Fe(III) and U(VI) reduction. These findings suggest that AQDS facilitated electron transfer from G. sulfurreducens to U(VI) associated with surface sites atwhich direct enzymatic reduction was kinetically limited. Our results demonstrate that association of U(VI) with diverse surface sites in natural soils and sediments has the potential to limit the rate and extent of microbial U(VI) reduction and thereby modulate the effectiveness of in situ U(VI) bioremediation.     

Use of spectroscopic techniques for uranium(VI)/montmorillonite interaction modeling

To experimentally identify both clay sorption sites and sorption equilibria and to understand the retention mechanisms at a molecular level, we have characterized the structure of hexavalent uranium surface complexes resulting from the interaction between the uranyl ions and the surface retention groups of a montmorillonite clay. We have performed laser-induced fluorescence spectroscopy (LIFS) and X-ray photoelectron spectroscopy (XPS) on uranyl ion loaded montmorillonite. These structural results were then compared to those obtained from the study of uranyl ions sorbed onto an alumina and also from U(VI) sorbed on an amorphous silica. This experimental approach allowed for a clear determination of the reactive surface sites of montmorillonite for U(VI) sorption. The lifetime values and the U4f XPS spectra of uranium(VI) sorbed on montmorillonite have shown that this ion is sorbed on both exchange and edge sites. The comparison of U(VI)/clay and U(VI)/oxide systems has determined that the interaction between uranyl ions and montmorillonite edge sites occurs via both [triple bond]AlOH and [triple bond]SiOH surface groups and involves three distinct surface complexes. The surface complexation modeling of the U(VI)/montmorillonite sorption edges was determined using the constant capacitance model and the above experimental constraints. The following equilibria were found to account for the uranyl sorption mechanisms onto montmorillonite for metal concentrations ranged from 10(-6) to 10(-3) M and two ionic strengths (0.1 and 0.5 M): 2[triple bond]XNa + UO2(2+) <==> ([triple bond]X)2UO2 + 2Na+, log K0(exch) = 3.0; [triple bond]Al(OH)2 + UO2(2+) <==> [triple bond]Al(OH)2UO2(2+), log K0(Al) = 14.9; [triple bond]Si(OH)2 + UO2(2+) <==> [triple bond]SiO2UO2 + 2H+, log K0(Si1) = -3.8; and [triple bond]Si(OH)2 + 3UO2(2+) + 5H2O <==> [triple bond]SiO2(UO2)3(OH)5- + 7H+, log K0(Si2) = -20.0.     

U(VI)-kaolinite surface complexation in absence and presence of humic acid studied by TRLFS

Time-resolved laser-induced fluorescence spectroscopy (TRLFS) was applied to study the U(VI) surface complexes on kaolinite in the presence and absence of humic acid (HA). Two uranyl surface species with fluorescence lifetimes of 5.9 +/- 1.4 and 42.5 +/- 3.4 micros and 4.4 +/- 1.2 and 30.9 +/- 7.2 micros were identified in the binary (U(VI)-kaolinite) and ternary system (U(VI)-HA-kaolinite), respectively. The fluorescence spectra of adsorbed uranyl surface species are described with six and five fluorescence emission bands in the binary and ternary system, respectively. The positions of peak maxima are shifted significantly to higher wavelengths compared to the free uranyl ion in perchlorate medium. HA has no influence on positions of the fluorescence emission bands. In the binary system, both surface species can be attributed to adsorbed bidentate mononuclear surface complexes, which differ in the number of water molecules in their coordination environment. In the ternary system, U(VI) prefers direct binding on kaolinite rather than via HA, but it is sorbed as a uranyl-humate complex. Consequently, the hydration shell of the U(VI) surface complexes is displaced with complexed HA, which is simultaneously distributed between kaolinite particles. Aluminol binding sites are assumed to control the sorption of U(VI) onto kaolinite.     

Sorption of uranium(VI) onto ferric oxides in sulfate-rich acid waters

The mechanisms of the uranium(VI) sorption on schwertmannite and goethite in acid sulfate-rich solutions were studied by Extended X-ray Absorption Fine Structure (EXAFS) spectroscopy. The samples were prepared under N2 atmosphere and initial uranium(VI) concentrations of 1 x 10(-5) (pH 6.5) to 5 x 10(-5) M (pH 4.2). The ionic strength was adjusted using 0.01 M Na2SO4 or 0.01 M NaClO4, respectively. The EXAFS structural parameters for uranium(VI) sorbed on goethite in sulfate-rich, acid and near-neutral solutions indicate that uranium(VI) forms an inner-sphere, mononuclear, bidentate surface complex. This complex is characterized by a uranium-ferric-iron distance of approximately 3.45 A. Uranium(VI) sorbed onto schwertmannite in acid and sulfate-rich solution is coordinated to one or two sulfate molecules with a uranium-sulfur distance of 3.67 A. The EXAFS results indicate formation of binuclear, bidentate surface complexes and partly of mononuclear, monodentate surface complexes coordinated to the structural sulfate of schwertmannite. The formation of ternary uranium(VI)-sulfate surface complexes could not be excluded because of the uncertainty in assigning the sulfate either to the bulk structure or to adsorption reactions. The uranium(VI) adsorption onto schwertmannite in perchlorate solution occurs predominantly as a mononuclear, bidentate complexation with ferric iron due to the release of sulfate from the substrate.     

In situ bioreduction of uranium (VI) to submicromolar levels and reoxidation by dissolved oxygen

Groundwater within Area 3 of the U.S. Department of Energy (DOE) Environmental Remediation Sciences Program (ERSP) Field Research Center at Oak Ridge, TN (ORFRC) contains up to 135 microM uranium as U(VI). Through a series of experiments at a pilot scale test facility, we explored the lower limits of groundwater U(VI) that can be achieved by in-situ biostimulation and the effects of dissolved oxygen on immobilized uranium. Weekly 2 day additions of ethanol over a 2-year period stimulated growth of denitrifying, Fe(III)-reducing, and sulfate-reducing bacteria, and immobilization of uranium as U(IV), with dissolved uranium concentrations decreasing to low levels. Following sulfite addition to remove dissolved oxygen, aqueous U(VI) concentrations fell below the U.S. Environmental Protection Agengy maximum contaminant limit (MCL) for drinking water (< 30/microg L(-1) or 0.126 microM). Under anaerobic conditions, these low concentrations were stable, even in the absence of added ethanol. However, when sulfite additions stopped, and dissolved oxygen (4.0-5.5 mg L(-1)) entered the injection well, spatially variable changes in aqueous U(VI) occurred over a 60 day period, with concentrations increasing rapidly from < 0.13 to 2.0 microM at a multilevel sampling (MLS) well located close to the injection well, but changing little at an MLS well located further away. Resumption of ethanol addition restored reduction of Fe(III), sulfate, and U(VI) within 36 h. After 2 years of ethanol addition, X-ray absorption near-edge structure spectroscopy (XANES) analyses indicated that U(IV) comprised 60-80% of the total uranium in sediment samples. Atthe completion of the project (day 1260), U concentrations in MLS wells were less than 0.1 microM. The microbial community at MLS wells with low U(VI) contained bacteria that are known to reduce uranium, including Desulfovibrio spp. and Geobacter spp., in both sediment and groundwater. The dominant Fe(III)-reducing species were Geothrix spp.     

Determination of uranyl incorporation into biogenic manganese oxides using x-ray absorption spectroscopy and scattering

Biogenic manganese oxides are common and an important source of reactive mineral surfaces in the environment that may be potentially enhanced in bioremediation cases to improve natural attenuation. Experiments were performed in which the uranyl ion, UO2(2+) (U(VI)), at various concentrations was present during manganese oxide biogenesis. At all concentrations, there was strong uptake of U onto the oxides. Synchrotron-based extended X-ray absorption fine structure (EXAFS) spectroscopy and X-ray diffraction (XRD) studies were carried out to determine the molecular-scale mechanism by which uranyl is incorporated into the oxide and how this incorporation affects the resulting manganese oxide structure and mineralogy. The EXAFS experiments show that at low concentrations (<0.3 mol % U, <1 microM U(VI) in solution), U(VI) is present as a strong bidentate surface complex. At high concentrations (>2 mol % U, >4 microM U(VI) in solution), the presence of U(VI) affects the stability and structure of the Mn oxide to form poorly ordered Mn oxide tunnel structures, similar to todorokite. EXAFS modeling shows that uranyl is present in these oxides predominantly in the tunnels of the Mn oxide structure in a tridentate complex. Observations by XRD corroborate these results. Structural incorporation may lead to more stable U(VI) sequestration that may be suitable for remediation uses. These observations, combined with the very high uptake capacity of the Mn oxides, imply that Mn-oxidizing bacteria may significantly influence dissolved U(VI) concentrations in impacted waters via sorption and incorporation into Mn oxide biominerals.