Synthesis of third-order nonlinear optical polyacrylates containing an azobenzene side chain via atom transfer radical polymerization

A series of polyacrylates containing different substituted-azobenzene chromophores were synthesized and polymerized via atom transfer radical polymerization. Nonlinear optical homopolymers containing an azobenzene side chain, of controllable molecular mass and low polydispersity (1.1–1.4) were obtained. In addition, side-chain copolymers were prepared in which the composition of the copolymers was controlled by using different feed ratios of the azobenzene monomer and methyl methacrylate. The third-order nonlinear optical properties of azobenzene monomers and their polymers were measured using the degenerated four-wave mixing technique. Each of the polymers displayed a high χ⁽³⁾ of about 10^?11 esu and rapid response time in femto-second magnitude. The effect of substituents on the azobenzene group and the composition of the polymer chain on the third-order nonlinear optical properties of the polymers were investigated.     

原子转移自由基聚合法制备星形聚苯乙烯

采用原子转移自由基聚合（ATRP）法,以三羟甲基丙烷为核制备引发剂,以苯乙烯为单体,合成三臂聚苯乙烯星形聚合物,并用傅里叶变换红外光谱（FTIR）、核磁共振氢谱（1H-NMR）、凝胶渗透色谱（GPC）对所得引发剂和聚合物的结构进行了表征。结果表明,FTIR证实了三臂引发剂和聚苯乙烯的存在。1H-NMR分析证实,采用ATRP法可以成功合成出目标产物星形聚苯乙烯。GPC分析证明了所得产物的数均分子量为2 700~9 460,基本符合预期值;多分散性指数仅为1.01~1.05,具备活性聚合特征。     

原子转移自由基聚合法合成PS-g-PMMA

以氯乙酰化聚苯乙烯微球（PS-acyl-Cl）为大分子引发剂,甲基丙烯酸甲酯（MMA）为单体,CuCl/CuCl₂及N,N,N′,N′-四甲基乙二胺（TMEDA）为催化体系的原子转移自由基聚合反应,成功在PS-acyl-Cl表面接枝上PMMA分子链而获得聚苯乙烯 接枝 聚甲基丙烯酸甲酯（PS-g-PMMA）。考察了催化剂、反应温度、溶剂用量等条件对接枝反应的影响,优化的反应条件下,使用氯乙酰基担载量3.44 mmol.g^-1的PS-acyl-Cl,15 h可获得增重率687% 的PS-g-PMMA,且反应表现出一级动力学特征（k=513×10^-5 s^-1）。通过改变反应条件,可得到不同PMMA接枝链长的PS-g-PMMA。反应得到的PS-g-PMMA经水解后有望作为高担载量弱酸型离子交换树脂或进一步功能化后作为酶的柔性固定化载体。     

聚丙烯的原子转移自由基接枝共聚

将商品氯化聚丙烯还原后作为原子转移自由基聚合的引发剂,在溴化铜/2,2'－联吡啶的催化下与聚苯乙烯接枝共聚.核磁共振氢谱分析结果表明聚丙烯与聚苯乙烯发生了接枝共聚;接枝率随聚合时间的增加而增大.     

Synthesis and characterization of clay dispersed polystyrene nanocomposite via atom transfer radical polymerization

Finely well‐defined polystyrene nanocomposites were prepared by ATRP method in bulk at 110°C using organically modified montemorillonite, cloisite 30B. The living nature of ATRP reaction was employed to in situ synthesize tailor‐made polystyrene nanocomposite with narrow molecular weight distribution and controlled molecular weight polystyrene chains. The amount of clay loading and time of swelling of clay in the monomer before polymerization were proved to have a positive effect on polymerization rate and also broadened the molecular weight destribution. The gas chromatography (GC) results showed the linear increase of Ln(M₀/M) versus time, which indicates the controlled/living polymerization in the presence of nanoclay. Another confirmation of the living nature of the polymerization was linear elevation of molecular weight against monomer conversion concluded from gel permeation chromatography (GPC) data. X‐ray diffraction analysis showed the interlayer spacing of nanoclay platelets as well as the exfoliated clay morphology in the nanocomposite samples. Transfer electron microscopy (TEM) revealed the exfoliated morphology of the in situ prepared nanocomposite as opposed to conventional solution‐blending technique which resulted in an intercalated structure. The effect of nanoclay on acceleration of polymerization was proved by GC and GPC; similarly, Fourier transform infrared spectroscopy (FTIR) was used to discuss the reasons of such a rate acceleration. A shifting in the wave number of characteristic bonds of nanoclay after polymerization mostly in the case of O H and Si O bonds, revealed the interaction between polymer chains and clay layers which resulted in an accelerated polymerization process. The living nature of polymeric chains was more elucidated by FTIR data. Atomic force microscopy (AFM) images also confirmed the proper dispersion of nanoparticles in the polymer medium. POLYM. COMPOS., 31:1829–1837, 2010. © 2010 Society of Plastics Engineers     

Bioactive surfaces and biomaterials via atom transfer radical polymerization

Recent progress in controlled radical polymerizations, in particular atom transfer radical polymerization (ATRP), has provided a unique means for the design and synthesis of bioactive surfaces and functional biomaterials. This review summarizes such recent research activities. The synthesis strategies of bioactive surfaces and biomaterials via ATRP are described in detail. The highly robust and versatile ATRP technique is particularly suited for the preparation of functional bioactive surfaces, including antifouling, antibacterial, stimuli-responsive, biomolecule-coupled and micropatterned surfaces. In addition to bioactive surfaces, ATRP has also been widely used for the preparation of well-structured functional biomaterials, such as micellar delivery systems, hydrogels, cationic gene carriers and polymer–protein conjugates. The research activities in the last decade indicate that ATRP has become an essential tool for the design and synthesis of advanced, noble and novel biomaterials.     

原子转移自由基聚合合成支化聚丙烯腈

以二乙烯苯为支化单体,α-溴代异丁酸叔丁酯为引发剂,CuBr和2,2'-联吡啶为催化体系,利用本体和溶液原子转移自由基聚合合成了支化聚丙烯腈.采用核磁共振谱仪、凝胶渗透色谱仪和多角度激光光散射仪等测试了聚合物结构、相对分子质量及其分布.用无水乙酸钠对支化聚丙烯腈进行末端改性,得到了在硫氰酸钠水溶液中性能稳定、可长期保存的支化聚丙烯腈,而改性对聚合物的耐热性能没有影响.     

Surface functionalization of nanodiamond particles via atom transfer radical polymerization

Ultradispersed diamond (UDD)/polymer brushes having excellent solution dispersibilities are prepared by atom transfer radical polymerization (ATRP) using the “grafting-from” synthesis strategy. ATRP initiators, covalently attached to oxidized surface carbon atoms of UDD aggregates using esterification chemistry, initiate polymerization of methacrylate monomers to form hydrophobic UDD/poly(iso-butyl methacrylate) and UDD/poly(tert-butyl methacrylate) polymer brushes. Acid hydrolysis of a UDD/poly(tert-butyl methacrylate) polymer brush affords a hydrophilic UDD/poly(methacrylic acid) polymer brush. Based on surface area measurements and GPC data, the calculated surface density of a representative UDD/polymer brush material is ca. five polymer chains/100 nm². A wide variety of UDD/polymer brush materials having controlled dispersibility and functional group reactivity are now potentially available using this synthesis strategy.     

Synthesis and characterization of pH/temperature-sensitive block copolymers via atom transfer radical polymerization

In order to prepare well-defined pH-sensitive block copolymers with a narrow molecular weight distribution (MWD), we synthesized a pH-sensitive block copolymer via atom transfer radical polymerization (ATRP) of sulfamethazine methacrylate monomer (SM) and amphiphilic diblock copolymers by the ring-opening polymerization of d,l-lactide/?-caprolactone (LA/CL), and their sol-gel phase transition was investigated. SM, which is a derivative of sulfonamide, was used as a pH responsive moiety, while PCLA-PEG-PCLA was used as a biodegradable, as well as a temperature sensitive one, amphiphilic triblock copolymer. The pentablock copolymer, OSM-PCLA-PEG-PCLA-OSM, was synthesized using Br-PCLA-PEG-PCLA-Br as an ATRP macroinitiator. The number average molecular weights of SM were controlled by adjusting the monomer/initiator feed ratio. The macroinitiator was synthesized by the coupling of 2-bromoisobutyryl bromide with PCLA-PEG-PCLA in the presence of triethyl amine catalyst in dichloromethane. The resultant block copolymer shows a narrow polydispersity. The block copolymer solution shows a sol-gel transition in response to a slight pH change in the range of 7.2-8.0. Gel permeation chromatography (GPC) and NMR were used for the characterization of the polymers that were synthesized.     

Synthesis of triphenyl phosphine oxide‐containing polymers via atom transfer radical polymerization

Bis[(4 ‐β‐(2‐bromopropanoate)ethoxy)phenyl]phenylphosphine oxide was used for the first time as the initiator of atom transfer radical polymerization of styrene and methyl methacrylate in the presence of CuBr/N, N,N′, N″, N″‐pentamethyldiethylenetriamine as catalyst/ligand and dimethyl sulfoxide as solvent. The presence of phosphine oxide linkages in the backbone gives the polymers special properties; low T_g, high char yield, and decreases the oxygen induction time value. A linear increase of number average molecular weight (M_n) versus monomer conversion was observed, and the molecular weight distribution was relatively narrow (M_w/M_n = 1.1–1.3). FTIR, ¹HNMR, gel permeation chromatography, ultraviolet spectroscopies were used for the characterization of the related polymers. The thermal properties of these polymers were investigated by differential scanning calorimetry and thermogravimetric analysis. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Star polymers via atom transfer radical polymerization from adamantane-based cores

A series of novel multifunctional initiators derived from adamantane-based derivatives have been used in the syntheses of various styrenic and (meth)acrylic star polymers by atom transfer radical polymerization (ATRP). Conditions were identified in each system to produce star polymers with nearly monomodal molecular distributions. These synthesized star polymers have glass transition temperatures similar to those known for high-molecular-weight linear polymers. We obtained a series of adamantane-contained star polymers covering a wide range of molecular weights by adjusting the monomer-to-initiator ratio and the solvent polarity. Because of reaction heterogeneity and inevitable termination processes, the occurrence of star-star coupling led to a lower than predicted molecular weight polydispersity. When hydrolyzed from their cores by NaOH, the values of M_w of the arms of the PMMA star polymer did not change with reaction time, at least for the first 48 h of the reaction, which implies that no significant PMMA hydrolysis occurs within this interval of time.     

Synthesis of oxyquinolyl end-functional PMMA by atom transfer radical polymerization

Abstract: Oxyquinolyl end group functionalized PMMA was prepared by a new initiator 5-chloromethyl-8-hydroxyquinoline via atom transfer radical polymerization. Studying this polymer, we find it possesses stronger fluorescence and larger nonlinear third-order optical (NLO) coefficient than the PMMA initiated by ethyl -bromoisobutyrate, and the polymer could be easily processed into film. The NLO coefficient of the polymer tested in the film is better than that in the solution.     

原子转移自由基聚合法制备聚乳酸三嵌段共聚物的研究

以自制的双端羟基聚乳酸与α-溴代丙酰溴反应而制得的含溴端基的聚乳酸为大分子引发剂,溴化亚铜/2,2′-联吡啶为催化体系,研究了N-乙烯基吡咯烷酮的原子转移自由基聚合行为,制得了具有两亲性聚乳酸嵌段共聚物。随单体/引发剂摩尔比的增大、聚合温度的升高,共聚物溶液的特性黏度增大,共聚物薄膜的吸水率增加;共聚物在不同降解介质中的降解规律相似,均随降解时间的延长,共聚物薄膜的失重增加,且在不同介质中呈现的降解速率表现为碱液>酸液>水>缓冲液。对聚合物进行了结构表征。     

Synthesis of linear tetrablock quaterpolymers via atom transfer radical polymerization and a click coupling approach

We report the synthesis of a well-defined linear tetrablock quaterpolymer of poly(butyl acrylate)-b-polystyrene-b-poly(methyl acrylate)-b-poly(methyl methacrylate) by combining atom transfer radical polymerization (ATRP) and a click coupling approach. For this purpose, polystyrene-b-poly(butyl acrylate) (AB) was prepared by ATRP using macroinitiator as α-trimethylsilyl(TMS)-alkyne ω-bromo polystyrene. The α-(TMS) end of the AB diblock copolymer was deprotected using tetrabutylammonium fluoride (TBAF) in THF. The ω-azide end of the CD diblock copolymer was made from poly(methyl methacrylate)-b-poly(methyl acrylate) (CD) via transformation of the bromine chain end by a simple nucleophilic substitution reaction with NaN₃ in DMF. Click coupling between the ω-azide end in CD diblock copolymer with the α-alkyne end in the AB diblock copolymer was then performed by Cu¹-catalyzed (3+2) cycloaddition. Gel permeation chromatography (GPC), FT-IR and ¹H NMR spectroscopy confirmed the successful formation of a linear ABCD tetrablock copolymer via ATRP and click coupling.     

原子转移自由基聚合制备超支化聚合物进展

介绍了原子转移自由基聚合(ATRP)制备超支化聚合物的原理以及近年来采用ATRP方法制备的各种支化/超支化聚合物,展望了ATRP的发展趋势.ATRP是目前可控,活性聚合最成功的方法之一,它以过渡金属配合物为催化剂,通过有机卤化物引发乙烯基单体的自由基聚合,合成相对分子质量可控、相对分子质量分布窄的多种聚合物.     

Synthesis and characterization of hyperbranched azobenzene-containing polymers via self-condensing atom transfer radical polymerization and copolymerization

We report on the synthesis of an azobenzene-containing inimer 6-{4-[4-(2-(2-bromoisobutyryloxy)hexyloxy)phenylazo]phenoxy}hexyl methacrylate (I) and used it to prepare hyperbranched homopolymer and copolymers by self-condensing vinyl polymerization (SCVP) and copolymerization (SCVCP) with its precursor 6-{4-[4-(6-hydroxyhexyloxy)phenylazo]phenoxy}hexyl methacrylate (M) using atom transfer radical polymerization (ATRP). Depending on the comonomer ratio, γ=[M]₀/[I]₀, branched polymethacrylates with number-average weights between 8000 and 20,000 and degree of branching (DB) between 0.08 and 0.49 were obtained by SCVCP, as evidenced by GPC and ¹H NMR analysis. In addition, the photochemical properties of the polymers were also studied by UV-vis spectra and found the structure of polymers affect obviously the trans-cis isomerization properties of the branched polymers.     

Grafting polymers from cellulose nanocrystals via surface-initiated atom transfer radical polymerization

Cellulose nanocrystals (CNC) are rod-like nanoparticles extracted from cellulose. Due to their fascinating properties—renewable, biocompatible, non-toxic, biodegradable, excellent mechanical performances, high specific surface area, water dispersible, can be assemble in chiral nematic phases—CNC have shown promise in various fields, including oil recovery, polymer composites reinforcing, hydrogels, aerogels, supercapacitors, energy saving buildings, cosmetics, papermaking, coatings, liquid crystals, and waste water treatment. However, the hydrophilic surface of CNC hinders their broader applications. In this context, surface modification of CNC via polymer grafting can be used to finely tune their surficial properties and endow CNC with a variety of functionalities, such as conductivity, pH or temperature responsiveness, reactivity…In particular, surface-initiated atom transfer radical polymerization (SI-ATRP) is a powerful tool to graft various polymers with a high grafting density and controlled chain length. In this review, the precise control of grafted polymers from CNC via SI-ATRP is first discussed, including issues related to the polymer grafting density, chain length and possibility to perform an asymmetric grafting. Then, the properties and applications of CNC grafted with a variety of polymers are presented. Finally, some challenges and outlook related to the SI-ATRP method applied to the field of CNC is discussed.     

利用原子转移自由基聚合制备水溶性含氟嵌段共聚物

利用原子转移自由基聚合技术合成了相对分子质量可控,相对分子质量分布较窄的丙烯酸叔丁酯与氟烷基（甲基）丙烯酸酯的嵌段共聚物。进一步将嵌段共聚物的丙烯酸叔丁酯链段在酸性条件下水解,制备了水溶性含氟嵌段共聚物,借助核磁共振氢谱和红外光谱对嵌段共聚物进行了表征。     

Synthesis of aromatic carboxyl functionalized polymers by atom transfer radical polymerization

The synthesis of aromatic carboxyl functionalized polymers by atom transfer radical polymerization is described. The α‐bromo‐p‐toluic acid ( 1 ) initiated polymerization of styrene in the presence of copper(I) bromide and 2,2′‐bipyridyl affords quantitative yields of the corresponding aromatic carboxyl functionalized polystyrene ( 2 ). Polymerization proceeded via a controlled free radical process to afford quantitative yields of the corresponding aromatic carboxyl functionalized polymers with predictable molecular weights (M_n = 1600–25 900 g mol⁻¹), narrow molecular weight distribution (M_w /M_n = 1.1–1.40) and an initiator efficiency above 0.87. The polymerization process was monitored by gas chromatographic analysis. The functionalized polymers were characterized by thin layer chromatography, size exclusion chromatography, spectroscopy, potentiometry and elemental analysis. © 2000 Society of Chemical Industry     

Synthesis of binary mixed homopolymer brushes by combining atom transfer radical polymerization and nitroxide-mediated radical polymerization

This communication describes a novel strategy to synthesize binary mixed homopolymer brushes from mixed self-assembled monolayers (SAMs) on silica substrates by combining atom transfer radical polymerization (ATRP) and nitroxide-mediated radical polymerization (NMRP). Mixed SAMs terminated by ATRP and NMRP initiators were prepared by coadsorption of two corresponding organotrichlorosilanes from toluene solutions. Mixed poly(methyl methacrylate) (PMMA)/polystyrene (PS) brushes were synthesized by ATRP of MMA at 80 °C followed by NMRP of styrene at 115 °C. Corresponding ‘free’ initiators were added into the solutions to control the polymerizations. We have found that the brush thickness increases with molecular weight in a nearly linear fashion. For a series of binary brushes consisting of PMMA of molecular weight of 26,200 and PS of various molecular weights, we have observed a transition in water contact angles with increasing PS molecular weight after CH₂Cl₂ treatment. Moreover, binary mixed polymer brushes with comparable molecular weights for two grafted polymers undergo reorganization in response to environmental changes, exhibiting different wettabilities.