Surfactant-Induced Wettability Alteration of Oil-Wet Sandstone Surface: Mechanisms and Its Effect on Oil Recovery

Different analytical methods were utilized to investigate the mechanisms for wettability alteration of oil-wet sandstone surfaces induced by different surfactants and the effect of reservoir wettability on oil recovery. The cationic surfactant cetyltrimethylammonium bromide (CTAB) is more effective than the nonionic surfactant octylphenol ethoxylate (TX-100) and the anionic surfactant sodium laureth sulfate (POE(1)) in altering the wettability of oil-wet sandstone surfaces. The cationic surfactant CTAB was able to desorb negatively charged carboxylates of crude oil from the solid surface in an irreversible way by the formation of ion pairs. For the nonionic surfactant TX-100 and the anionic surfactant POE(1), the wettability of oil-wet sandstone surfaces is changed by the adsorption of surfactants on the solid surface. The different surfactants were added into water to vary the core surface wettability, while maintaining a constant interfacial tension. The more water-wet core showed a higher oil recovery by spontaneous imbibition. The neutral wetting micromodel showed the highest oil recovery by waterflooding and the oil-wet model showed the maximum residual oil saturation among all the models.     

Enhanced Wettability Alteration by Surfactants with Multiple Hydrophilic Moieties

The main production mechanism during water flooding of naturally fractured oil reservoirs is the spontaneous imbibition of water into matrix blocks and resultant displacement of oil into the fracture system. This is an efficient recovery process when the matrix is strongly water-wet. However, in mixed- to oil-wet reservoirs, secondary recovery from water flooding is often poor. Oil production can be improved by dissolving low concentrations of surfactants in the injected water. The surfactant alters the wettability of the reservoir rock, enhancing the spontaneous imbibition process. Our previous study revealed that the two main mechanisms responsible for the wettability alteration are ion-pair formation and adsorption of surfactant molecules through interactions with the adsorbed crude oil components on the rock surface. Based on the superior performance of surfactin, an anionic biosurfactant with two charged groups on the hydrophilic head, it was hypothesized that the wettability alteration process might be further improved through the use of dimeric or gemini surfactants, which have two hydrophilic head groups and two hydrophobic tails. We believe that when ion-pair formation is the dominant wettability alteration mechanism, wettability alteration in oil-wet cores can be improved by increasing the charge density on the head group(s) of the surfactant molecule since the ion-pair formation is driven by electrostatic interactions. At a concentration of 1.0 mmol L⁻¹ a representative anionic gemini surfactant showed oil recoveries of up to 49% original oil-in-place (OOIP) from oil-wet sandstone cores, compared to 6 and 27% for sodium laureth sulfate and surfactin, respectively. These observations are consistent with our hypothesis.     

A stabilized foam formulation using FTP-SDS surfactants for wettability alteration and flow diversion in carbonate fractured oil reservoirs

Foam injection contributes to improved oil recovery through flow diversion, reduction of interfacial tension (IFT), and wettability alteration of the rock while its stability is an issue. In this article, nitrogen-foam was optimally formulated using fluorocarbon tubiguard protect (FTP) surfactant stabilized with sodium dodecyl sulfate (SDS) co-surfactant that was later experimentally considered for oil recovery in a fractured carbonate rock taken from an oil field in the Middle East. The results showed that the 5:1 volume ratio of fluorocarbon surfactant and SDS (FS51) generates a stable foaming agent with ability of changing the wettability of the carbonate rock surfaces to an intermediate gas-wet state. A series of core-flood experiments at HPHT conditions were also carried out and designed to properly represent matrix-fracture media using both a horizontally and vertically oriented setup. The oil saturated cores were flooded with nitrogen gas first followed by foam injection. It was concluded that foam can divert the gas to flow from fractures to the matrix blocks and result in a significant oil recovery. The contact angle tests that performed after core-flood experiments revealed the wettability changes of fracture surfaces from an oil-wet to a gas-wet state. This allows gas to be imbibed into the matrix blocks by capillary force and results in enhancement of ultimate oil recovery. This study revealed that trapped oil in matrixes blocks that had not been drained during the gas injection process could be produced by designing a stable foam that sustainably diverts injected fluid from fractures to matrix zone.     

Review on application of nanoparticles for EOR purposes: A critical review of the opportunities and challenges

Nanoparticles have already gained attentions for their countless potential applications in enhanced oil recovery.Nano-sized particles would help to recover trapped oil by several mechanisms including interfacial tension reduction, impulsive emulsion formation and wettability alteration of porous media. The presence of dispersed nanoparticles in injected fluids would enhance the recovery process through their movement towards oil–water interface. This would cause the interfacial tension to be reduced. In this research, the effects of different types of nanoparticles and different nanoparticle concentrations on EOR processes were investigated. Different flooding experiments were investigated to reveal enhancing oil recovery mechanisms. The results showed that nanoparticles have the ability to reduce the IFT as well as contact angle, making the solid surface to more water wet. As nanoparticle concentration increases more trapped oil was produced mainly due to wettability alteration to water wet and IFT reduction. However, pore blockage was also observed due to adsorption of nanoparticles, a phenomenon which caused the injection pressure to increase. Nonetheless, such higher injection pressure could displace some trapped oil in the small pore channels out of the model. The investigated results gave a clear indication that the EOR potential of nanoparticle fluid is significant.     

Investigation of Interfacial Tension Reduction,Wettability Alteration,and Oil Recovery Using a New Non-ionic Oil-Based Surfactant from Gemini Surfactants Family Coupled with Low-Salinity Water: Experimental Study on Oil-Wet Carbonate Rock

Low-salinity surfactant (LSS) flooding is a combined enhanced oil recovery (EOR) technique that increases oil recovery (OR) by altering the rock surface wettability and reducing oil–water interfacial tension (IFT). In this study, optimum concentrations of several types of salt in distilled water were obtained on the basis of IFT experiments for the preparation of low-salinity water (LSW). Then, a new oil-based natural surfactant (Gemini surfactant, GS) was combined with LSW to investigate their effects on IFT, wettability, and OR. Experimental results showed that LSW is capable of reducing IFT and contact angle, but the synergy of GS and the active ions Mg²⁺, Ca²⁺, and SO₄²⁻ in LSW was more effective on IFT reduction and wettability alteration. The combination of 1000 ppm MgSO₄ and 3000 ppm GS led to a decrease in contact angle from 134.82° to 36.98° (oil-wet to water-wet). Based on core flooding tests, LSW injection can increase OR up to 71.46% (for LSW with 1000 ppm MgSO₄), while the combination of GS and LSW, as LSS flooding, can improve OR up to 84.23% (for LSS with 1000 ppm MgSO₄ and 3000 ppm GS). Therefore GS has great potential to be used as a surfactant for EOR.     

Model Development for MEOR Process in Conventional Non‐Fractured Reservoirs and Investigation of Physico‐Chemical Parameter Effects

A three‐dimensional multi‐component transport model in a two‐phase oil‐water system was developed. The model includes separated terms to account for the dispersion, convection, injection, growth and death of microbes, and accumulation. For the first time, effects of both wettability alteration of reservoir rock from oil wet to water wet and reduction in interfacial tension (IFT) simultaneously on relative permeability and capillary pressure curves were included in a MEOR simulation model. Transport equations were considered for the bacteria, nutrients, and metabolite (bio‐surfactant) in the matrix, reduced interfacial tension on phase trapping, surfactant and polymer adsorption, and effect of polymer viscosity on mobility of the aqueous phase. The model was used to simulate effects of physico‐chemical parameters, namely flooding time schedules, washing water flowrate, substrate concentration, permeability, polymer and salinity concentration on Original Oil In Place (OOIP) in a hypothetical reservoir.     

Characterizations of surfactant synthesized from Jatropha oil and its application in enhanced oil recovery

Surfactants are frequently used in chemical enhanced oil recovery (EOR) as it reduces the interfacial tension (IFT) to an ultra‐low value and also alter the wettability of oil‐wet rock, which are important mechanisms for EOR. However, most of the commercial surfactants used in chemical EOR are very expensive. In view of that an attempt has been made to synthesis an anionic surfactant from non‐edible Jatropha oil for its application in EOR. Synthesized surfactant was characterized by FTIR, NMR, dynamic light scattering, thermogravimeter analyser, FESEM, and EDX analysis. Thermal degradability study of the surfactant shows no significant loss till the conventional reservoir temperature. The ability of the surfactant for its use in chemical EOR has been tested by measuring its physicochemical properties, viz., reduction of surface tension, IFT and wettability alteration. The surfactant solution shows a surface tension value of 31.6 mN/m at its critical micelle concentration (CMC). An ultra‐low IFT of 0.0917 mN/m is obtained at CMC of surfactant solution, which is further reduced to 0.00108 mN/m at optimum salinity. The synthesized surfactant alters the oil‐wet quartz surface to water‐wet which favors enhanced recovery of oil. Flooding experiments were conducted with surfactant slugs with different concentrations. Encouraging results with additional recovery more than 25% of original oil in place above the conventional water flooding have been observed. © 2017 American Institute of Chemical Engineers AIChE J, 63: 2731–2741, 2017     

Determination of dynamic contact angles in solid–liquid–liquid systems using the Wilhelmy plate apparatus

The purpose of this work was to carry out a systematic study of the effects of brine composition and rock mineralogy on rock-oil-brine interactions taking place in petroleum reservoirs. These terms are generally lumped into a single term called wettability in petroleum engineering. The extent of wetting of the rock surface by water or oil depends on the dynamic contact angles measured in such a mode as to enable movements of the three-phase contact line. The Wilhelmy plate technique has been used in this study to measure adhesion tension (which is the product of interfacial tension and cosine of the contact angle) at the solid-liquid interface. The water-advancing and water-receding contact angles have been calculated from the adhesion tensions by making independent measurements of the liquid-liquid interfacial tensions using a du Noüy ring tensiometer. The water-advancing and receding angles have been measured in this study for pure hydrocarbons against synthetic brines of different concentrations. Polished surfaces of glass slides and dolomite have been used to simulate the reservoir rock surfaces. A nonionic surfactant (ethoxy alcohol), which is being used in Yates reservoir in West Texas for enhancing oil recovery, was used to quantify its wettability effects. The results of the systematic experimental investigation of the effects of practical variables on wettability are presented. It is found that interactions between surface-active agents at the interface of two liquids have an effect on wettability alteration. The composition and concentrations of different organic and inorganic chemical species have a major effect in making a reservoir oil-wet or water-wet.     

Acidic Heavy Oil Recovery Using a New Formulated Surfactant Accompanying Alkali–Polymer in High Salinity Brines

The strength of a newly formulated surfactant with an alkali and polymer (AS/ASP) to improve an acidic heavy oil recovery was laboratory evaluated by various flooding experiments. The comparative role of the parameters like chemical nature, surface wettability, salinity, temperature and injection scheme were explored at high temperature and pressure on Berea sandstone rocks. According to the results the anionic surfactant is capable of providing proper oil displacement under high salinity conditions around 15 wt%. Continuous monitoring of differential pressure response and effluents’ state clearly represented the formation of an emulsified oil in high saline solutions with both alkali and surfactant. Adding sodium metaborate to the surfactant solution reduced the interfacial tension (IFT) to ultra low values and decreased the surfactant emulsion generation capability at higher salinities. Besides, adding Flopaam AN113SH to the chemical slug increased the residual oil removal owing to lower mobility ratios. So, while high capillary number and an emulsion phase were generated by the A/S slug phases, adding polymer could further enhance the performance of these chemicals. On the other hand, chemical flooding through the oil-wet medium resulted in shorter break through time, lower differential pressure, finer emulsion formation, and lower oil recovery in comparison to the similar water-wet cases.     

Wettability alteration of oil-wet carbonate rocks by chitosan derivatives for application in enhanced oil recovery

The increasing demand for oil and the fast decline of crude oil production from mature fields encourages the development of new enhanced oil recovery (EOR) technologies. In this work, trimethyl chitosan (TMC) and trimethyl chitosan hydrophobized with myristoyl chloride (TMC-C14) are synthesized, and their wettability modification capacity of oil-wet carbonate rocks is evaluated through contact angle measurements, atomic force microscopy, and Raman spectroscopy. Their interaction with asphaltene molecules was evaluated through UV–Vis spectroscopy. Transport behavior and oil displacement capacity were investigated in an unconsolidated porous medium. Results show that they can modify the wettability of oil-wet carbonate rocks, turning them water-wet, promoting oil displacement increases by 25% for TMC, and 16% for TMC-C14.TMC shows a better performance for wettability alteration than TMC-C14, confirming the hypothesis that the higher the positive charge density on the polymeric surfactant structure, the more efficient will be the system as a wettability modifier and as an EOR agent.     

Laboratory Studies to Determine Suitable Chemicals to Improve Oil Recovery from Garzan Oil Field

Garzan oil field is located at the south east of Turkey. It is a mature oil field and the reservoir is fractured carbonate reservoir. After producing about 1% original oil in place (OOIP) reservoir pressure started to decline. Waterflooding was started in order to support reservoir pressure and also to enhance oil production in 1960. Waterflooding improved the oil recovery but after years of flooding water breakthrough at the production wells was observed. This increased the water/oil ratio at the production wells. In order to enhance oil recovery again different techniques were investigated. Chemical enhanced oil recovery (EOR) methods are gaining attention all over the world for oil recovery. Surfactant injection is an effective way for interfacial tension (IFT) reduction and wettability reversal. In this study, 31 different types of chemicals were studied to specify the effects on oil production. This paper presents solubility of surfactants in brine, IFT and contact angle measurements, imbibition tests, and lastly core flooding experiments. Most of the chemicals were incompatible with Garzan formation water, which has high divalent ion concentration. In this case, the usage of 2-propanol as co-surfactant yielded successful results for stability of the selected chemical solutions. The results of the wettability test indicated that both tested cationic and anionic surfactants altered the wettability of the carbonate rock from oil-wet to intermediate-wet. The maximum oil recovery by imbibition test was reached when core was exposed 1-ethly ionic liquid after imbibition in formation water. Also, after core flooding test, it is concluded that considerable amount of oil can be recovered from Garzan reservoir by waterflooding alone if adverse effects of natural fractures could be eliminated.     

A review on the application of nanofluids in enhanced oil recovery

Enhanced oil recovery (EOR) has been widely used to recover residual oil after the primary or secondary oil recovery processes. Compared to conventional methods, chemical EOR has demonstrated high oil recovery and low operational costs. Nanofluids have received extensive attention owing to their advantages of low cost, high oil recovery, and wide applicability. In recent years, nanofluids have been widely used in EOR processes. Moreover, several studies have focused on the role of nanofluids in the nanofluid EOR (N-EOR) process. However, the mechanisms related to N-EOR are unclear, and several of the mechanisms established are chaotic and contradictory. This review was conducted by considering heavy oil molecules/particle/surface micromechanics; nanofluid-assisted EOR methods; multiscale, multiphase pore/core displacement experiments; and multiphase flow fluid-solid coupling simulations. Nanofluids can alter the wettability of minerals (particle/surface micromechanics), oil/water interfacial tension (heavy oil molecules/water micromechanics), and structural disjoining pressure (heavy oil molecules/particle/surface micromechanics). They can also cause viscosity reduction (micromechanics of heavy oil molecules). Nanofoam technology, nanoemulsion technology, and injected fluids were used during the EOR process. The mechanism of N-EOR is based on the nanoparticle adsorption effect. Nanoparticles can be adsorbed on mineral surfaces and alter the wettability of minerals from oil-wet to water-wet conditions. Nanoparticles can also be adsorbed on the oil/water surface, which alters the oil/water interfacial tension, resulting in the formation of emulsions. Asphaltenes are also adsorbed on the surface of nanoparticles, which reduces the asphaltene content in heavy oil, resulting in a decrease in the viscosity of oil, which helps in oil recovery. In previous studies, most researchers only focused on the results, and the nanoparticle adsorption properties have been ignored. This review presents the relationship between the adsorption properties of nanoparticles and the N-EOR mechanisms. The nanofluid behaviour during a multiphase core displacement process is also discussed, and the corresponding simulation is analysed. Finally, potential mechanisms and future directions of N-EOR are proposed. The findings of this study can further the understanding of N-EOR mechanisms from the perspective of heavy oil molecules/particle/surface micromechanics, as well as clarify the role of nanofluids in multiphase core displacement experiments and simulations. This review also presents limitations and bottlenecks, guiding researchers to develop methods to synthesise novel nanoparticles and conduct further research.     

Toward A Mechanistic Understanding of Re-Infiltration in Naturally Fractured Reservoirs with Surfactant-Aided Gravity Drainage Process

Surfactant-aided gravity drainage is an improved oil recovery technique for water-invaded zone in fractured carbonate reservoirs, which are mostly oil-wet or mixed-wet rocks. The re-infiltration mechanism in water-invaded zone has a considerable effect on oil vertical movement in gravity drainage processes. In this work, a mechanistic understanding of re-infiltration in surfactant-aided gravity drainage, in comparison to oil–water gravity drainage is presented using an experimentally and numerically validated model. A column model is constructed from three matrix blocks. These blocks are separated from each other by horizontal fractures. A storage tank is considered on top of the model to store depleted oil from matrix blocks. The stacked-blocks model for re-infiltration is validated and verified to simulate water and chemical flooding using a mesh independency study and experimental flooding data in a composite core experiment. Using this model, several analyses are performed to investigate effects of rock and fluid properties, rock saturation functions, wettability alteration, surfactant adsorption, and capillary continuity on re-infiltration.     

Surfactant Enhanced Oil Recovery in a High Temperature and High Salinity Carbonate Reservoir

The goal of this work was to find an effective surfactant system for enhanced oil recovery after water injection substituting for oil at a vuggy fractured reservoir with a high temperature and high salinity (220,000 mg/L). Four types of surfactants with concentrations (less than 0.2 %) were screened. Washing oil experiments were conducted in Amott cells. A surfactant system was established by mixing a surfactant with best ultimate recovery and one with best recovery rate. The optimized surfactant system could recover 50 % of remaining oil. To study the mechanism of enhanced oil recovery after water injection substituting oil, interfacial tension (IFT) and contact angle were measured. Experimental results showed that surfactants with good washing ability had low IFT, but surfactants with low IFT may not have a good washing ability. IFT had no obvious relationship with the increased oil recovery or washing ability. The optimized system could not alter carbonate to decrease the oil‐wetting capability. Though octadecyl trimethyl ammonium chloride had a good ability wet the carbonate with water, it could not recover much oil. Therefore, except for interfacial tension and wettability alteration, there must be other parameters dominating oil recovery after water injection substituting for oil.     

壬基酚聚氧丙烯聚氧乙烯醚磺酸盐应用性能

合成了壬基酚聚氧丙烯聚氧乙烯醚磺酸盐（NPESO-3-4）,采用高效液相色谱法检测了目标产物中原料的含量,同时测定了其表面张力、乳化能力、润湿性及模拟驱油率并与壬基酚聚氧乙烯醚磺酸盐的性能（NPESO-0-4）做了比较。结果表明：与NPESO-0-4相比,NPESO-3-4水溶液降低表面张力的能力略低,但降低表面张力的效率较高。二者与胜利孤东原油之间的界面张力均在10-1 mN?m-1数量级,但NPESO-3-4能将油性表面润湿反转为中间润湿,乳化能力和模拟驱油率明显高于NPESO-0-4,说明含氧丙烯链节的阴-非离子表面活性剂在三次采油中有很好的应用价值。     

Wettability alteration and reducing water blockage in tight gas sandstone reservoirs using mixed cationic Gemini/nonionic fluorosurfactant mixtures

The unrecovered hydraulic fracturing fluid will invade the matrix and induce water blockage, creating formation damage and hindering the oil or gas production rate. First, the synergistic effect of cationic Gemini surfactant (MQAS) and nonionic fluorosurfactant (N-2821) mixtures on reducing the surface tension and wettability alteration was investigated in this paper. The critical micelle concentration (CMC) of the surfactant mixture is one or two orders of magnitude lower than that of N-2821 and MQAS, indicating that the MQAS/N-2821 mixtures exhibit an apparent synergistic effect in reducing surface tension. Moreover, the maximal contact angle of MQAS/N-2821 mixtures reached 83.55° at α_N-2821 = 0.5, and the total surfactant concentration of 1 × 10⁻⁴ mol/L due to the adsorption of surfactant. The adsorption mechanism of surfactants on the surface of quartz sand was then examined. The adsorption kinetics is consistent with the pseudo-second-order model at different surfactant concentrations, while the Freundlich model is suitable for describing the adsorption behavior of surfactants on the sandstone surface. This finding indicates that surfactant adsorption is multilayered. The MQAS/N-2821 surfactant mixtures have excellent surfactant activity due to the relationship of the capillary pressure to the surface tension, pore radius, and contact angle; thus, the addition of surfactant mixtures can reduce the liquid saturation effectively. Furthermore, the sequential imbibition experiments indicate that MQAS/N-2821 mixtures alter the wettability of the core plug, which results from the adsorption of surfactants. Compared with brine water, the MQAS/N-2821 mixtures decreased the liquid saturation and increased the permeability recovery ratios of the core plug.     

Wettability alterations due to crude oil composition and an anionic surfactant in petroleum reservoirs

In this study, dual-drop dual-crystal (DDDC) contact-angle measurements have been made using dolomite rock and fluid samples from the Yates reservoir (West Texas) and in the presence of an anionic (ethoxy sulfate) surfactant. The experiments have been conducted at Yates reservoir conditions (4.8 MPa and 27.8°C) and using live synthetic oil to provide realistic measurements of in situ reservoir wettability. Stocktank crude oil has also been used at reservoir conditions to study the oil compositional effects on wettability. An advancing contact angle of 152° measured for Yates dolomite rock, stocktank oil and synthetic reservoir brine showed a strong oil-wet nature. However, experiments with Yates live synthetic oil resulted in an advancing contact angle of 55°, indicating a weakly water-wet behavior. In the rock-fluids system consisting of Yates stocktank oil, the surfactant altered the wettability to less oil-wet by decreasing the advancing contact angle to 135°. For rock-fluids system with Yates live synthetic oil, the surfactant altered the wettability from weakly water-wet to strongly oil-wet by increasing the advancing contact angle from 55° to 165°. The oil-wet behavior observed with Yates live synthetic oil due to the surfactant indicates a significant wettability altering capability of the surfactant.     

Enhanced oil recovery from high‐salinity reservoirs by cationic gemini surfactants

In order to enhance oil recovery from high‐salinity reservoirs, a series of cationic gemini surfactants with different hydrophobic tails were synthesized. The surfactants were characterized by elemental analysis, infrared spectroscopy, mass spectrometry, and ¹H‐NMR. According to the requirements of surfactants used in enhanced oil recovery technology, physicochemical properties including surface tension, critical micelle concentration (CMC), contact angle, oil/water interfacial tension, and compatibility with formation water were fully studied. All cationic gemini surfactants have significant impact on the wettability of the oil‐wet surface, and the contact angle decreased remarkably from 98° to 33° after adding the gemini surfactant BA‐14. Under the condition of solution salinity of 65,430 mg/L, the cationic gemini surfactant BA‐14 reduces the interfacial tension to 10^?3 mN/m. Other related tests, including salt tolerance, adsorption, and flooding experiments, have been done. The concentration of 0.1% BA‐14 remains transparent with 120 g/L salinity at 50 °C. The adsorption capacity of BA‐14 is 6.3–11.5 mg/g. The gemini surfactant BA‐14 can improve the oil displacement efficiency by 11.09%. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46086.     

Synthesis of an Alkyl Polyoxyethylene Ether Sulfonate Surfactant and Its Application in Surfactant Flooding

Surfactant flooding as a potential enhanced oil‐recovery technology in a high‐temperature and high‐salinity oil reservoir after water flooding has attracted extensive attention. In this study, the synthesis of an alkyl alcohol polyoxyethylene ether sulfonate surfactant (C₁₂EO₇S) with dodecyl alcohol polyoxyethylene ether and sodium 2‐chloroethanesulfonate monohydrate, and its adaptability in surfactant flooding were investigated. The fundamental parameters of C₁₂EO₇S were obtained via surface tension measurement. And the ability to reduce oil–water interfacial tension (IFT), wettability alteration, emulsification, and adsorption was determined. The results illustrated that IFT could be reduced to 10^?3 mN m^?1 at high temperature and high salinity without additional additives, and C₁₂EO₇S exhibited benign wettability alternate ability, and emulsifying ability. Furthermore, the oil‐displacement experiments showed that C₁₂EO₇S solution could remarkably enhance oil recovery by 16.19% without adding any additives.     

Numerical simulation of enhanced oil recovery studies for aqueous gemini surfactant-polymer-nanoparticle systems

The article investigates the efficacy of gemini surfactant/polymer/nanoparticle flooding on chemical EOR. Initially, physicochemical behavior of aqueous chemical fluids were investigated via interfacial tension reduction, wettability alteration, adsorption, viscosity moderation and oil displacement experiments. During compositional analysis, Cartesian model with specified grid properties, injection flow-rate, well pattern, and rock-fluid characteristics was developed using CMG-STARS tool. Contour map analyses showed that oil saturation decreased from ~80% (initial) to 31.96%, 30.68%, and 29.30% after {14-6-14 GS + chase water}, {14-6-14 GS + PHPA + chase water}, and {14-6-14 GS + PHPA + SiO₂ chase water} flooding respectively. Tertiary recoveries of 15–19% were achieved, depending on injected fluid composition. Experimental data were history matched via CMOST tool to achieve good matching of simulated results. The CMG flooding simulator provides a holistic approach to investigate oil displacement profiles, assess flooding recovery capabilities with near-accuracy and predict the feasibility of proposed chemical EOR projects.