IBLEACH: intra-balanced LEACH protocol for wireless sensor networks

Wireless sensor networks (WSNs) are composed of many low cost, low power devices with sensing, local processing and wireless communication capabilities. Recent advances in wireless networks have led to many new protocols specifically designed for WSNs where energy awareness is an essential consideration. Most of the attention, however, has been given to the routing protocols since they might differ depending on the application and network architecture. Minimizing energy dissipation and maximizing network lifetime are important issues in the design of routing protocols for WSNs. In this paper, the low-energy adaptive clustering hierarchy (LEACH) routing protocol is considered and improved. We propose a clustering routing protocol named intra-balanced LEACH (IBLEACH), which extends LEACH protocol by balancing the energy consumption in the network. The simulation results show that IBLEACH outperforms LEACH and the existing improvements of LEACH in terms of network lifetime and energy consumption minimization.     

Modulated relay based stable election protocol for large-scale wireless sensor networks

Internet of things (IoT) applications based on wireless sensor networks (WSNs) have recently gained vast momentum. These applications vary from health care, smart cities, and military applications to environmental monitoring and disaster prevention. As a result, energy consumption and network lifetime have become the most critical research area of WSNs. Through energy-efficient routing protocols, it is possible to reduce energy consumption and extend the network lifetime for WSNs. Using hybrid routing protocols that incorporate multiple transmission methods is an effective way to improve network performance. This paper proposes modulated R-SEP (MR-SEP) for large-scale WSN-based IoT applications. MR-SEP is based on the well-known stable election protocol (SEP). MR-SEP defines three initial energy levels for the nodes to improve the network energy distribution and establishes multi-hop communication between the cluster heads (CHs) and the base station (BS) through relay nodes (RNs) to reduce the energy consumption of the nodes to reach the BS. In addition, MR-SEP reduces the replacement frequency of CHs, which helps increase network lifetime and decrease power consumption. Simulation results show that MR-SEP outperforms SEP, LEACH, and DEEC protocols by 70.2%, 71.58%, and 74.3%, respectively, in terms of lifetime and by 86.53%, 86.68%, and 86.93% in terms of throughput.     

DR-NAP: Data reduction strategy using neural adaptation phenomenon in wireless sensor networks

Internet of Things (IoT) has got significant popularity among the researchers' community as they have been applied in numerous application domains. Most of the IoT applications are implemented with the help of wireless sensor networks (WSNs). These WSNs use different sensor nodes with a limited battery power supply. Hence, the energy of the sensor node is considered as one of the primary constraints of WSN. Besides, data communication in WSN dissipates more energy than processing the data. In most WSNs applications, the sensed data generated from the same location sensor nodes are identical or time-series/periodical data. This redundant data transmission leads to more energy consumption. To reduce the energy consumption, a data reduction strategy using neural adaptation phenomenon (DR-NAP) has been proposed to decrease the communication energy in routing data to the BS in WSN. The neural adaptation phenomenon has been utilized for designing a simple data reduction scheme to decrease the amount of data transmitted. In this way, the sensor node energy is saved and the lifetime of the network is enhanced. The proposed approach has been implanted in the existing gravitational search algorithm (GSA)-based clustered routing for WSN. The sensed data are transmitted to CH and BS using DR-NAP. Real sensor data from the Intel Berkeley Research lab have been used for conducting the experiments. The experiment results show 47.82% and 51.96% of improvement in network lifetime when compared with GSA-based clustered routing and clustering scheme using Canada Geese Migration Principle (CS-CGMP) for routing, respectively.     

EFFORT: energy‐efficient opportunistic routing technology in wireless sensor networks

The utilization of limited energy in wireless sensor networks (WSNs) is the critical concern, whereas the effectiveness of routing mechanisms substantially influence energy usage. We notice that two common issues in existing specific routing schemes for WSNs are that (i) a path may traverse through a specific set of sensors, draining out their energy quickly and (ii) packet retransmissions over unreliable links may consume energy significantly. In this paper, we develop an energy‐efficient routing scheme (called EFFORT) to maximize the amount of data gathered in WSNs before the end of network lifetime. By exploiting two natural advantages of opportunistic routing, that is, the path diversity and the improvement of transmission reliability, we propose a new metric that enables each sensor to determine a suitable set of forwarders as well as their relay priorities. We then present EFFORT, a routing protocol that utilizes energy efficiently and prolongs network lifetime based on the proposed routing metric. Simulation results show that EFFORT significantly outperforms other routing protocols. Copyright © 2011 John Wiley & Sons, Ltd.     

Design of Two-Step Random Access Procedure for URLLC Applications

The idea of Smart City incorporates a few ideas being technology, economy, governance, people, management, and infrastructure. This implies a Smart City can have distinctive communication needs. Wireless technologies, for example, WiFi, Zig Bee, Bluetooth, WiMax, 4G or LTE have introduced themselves as a solution for the communication in Smart City activities. Nonetheless, as the majority of them utilize unlicensed interference, coexistence and bands issues are increasing. So to solve the problem IoT is used in smart cities. This paper addresses the issues of both resource allocation and routing to propose an energy efficient, congestion aware resource allocation and routing protocol (ECRR) for IoT network based on hybrid optimization techniques. The first contribution of proposed ECRR technique is to employ the data clustering and metaheuristic algorithm for allocate the large-scale devices and gateways of IoT to reduce the total congestion between them. The second contribution is to propose a queue based swarm optimization algorithm for select a better route for future route based on multiple constraints, which improves the route discovering mechanism. The proposed ECRR technique is implemented in Network Simulator (NS-2) tool and the simulation results are compared with the existing state-of-art techniques in terms of energy consumption, node lifetime, throughput, end-to-end delay, packet delivery ratio and packet overheads.

     

An unequal cluster-based routing scheme for multi-level heterogeneous wireless sensor networks

In wireless sensor networks (WSNs), clustering can significantly reduce energy dissipation of nodes, and also increase communication load of cluster heads. When multi-hop communication model is adopted in clustering, “energy hole” problem may occur due to unbalanced energy consumption among cluster heads. Recently, many multi-hop clustering protocols have been proposed to solve this problem. And the main way is using unequal clustering to control the size of clusters. However, many of these protocols are about homogeneous networks and few are about heterogeneous networks. In this paper, we present an unequal cluster-based routing scheme for WSNs with multi-level energy heterogeneity called UCR-H. The sensor field is partitioned into a number of equal-size rectangular units. We first calculate the number of clusters in each unit by balancing energy consumption among the cluster heads in different units. And then we find the optimal number of units by minimizing the total energy consumption of inter-cluster forwarding. Finally, the size of clusters in each unit is elaborately designed based on node’s energy level and the number of clusters in this unit. And a threshold is also designed to avoid excessive punishment to the nodes with higher energy level. Simulation results show that our scheme effectively mitigates the “energy hole” problem and achieves an obvious improvement on the network lifetime.     

A New Method to Find a High Reliable Route in IoT by Using Reinforcement Learning and Fuzzy Logic

Recently, Internet is moving quickly toward the interaction of objects, computing devices, sensors, and which are usually indicated as the Internet of things (IoT). The main monitoring infrastructure of IoT systems main monitoring infrastructure of IoT systems is wireless sensor networks. A wireless sensor network is composed of a large number of sensor nodes. Each sensor node has sensing, computing, and wireless communication capability. The sensor nodes send the data to a sink or a base station by using wireless transmission techniques However, sensor network systems require suitable routing structure to optimizing the lifetime. For providing reasonable energy consumption and optimizing the lifetime of WSNs, novel, efficient and economical schemes should be developed. In this paper, for enhancing network lifetime, a novel energy-efficient mechanism is proposed based on fuzzy logic and reinforcement learning. The fuzzy logic system and reinforcement learning is based on the remained energies of the nodes on the routes, the available bandwidth and the distance to the sink. This study also compares the performance of the proposed method with the fuzzy logic method and IEEE 802.15.4 protocol. The simulations of the proposed method which were carried out by OPNET (Optimum Network performance) indicated that the proposed method performed better than other protocols such as fuzzy logic and IEEE802.15.4 in terms of power consumption and network lifetime.

     

Fuzzy chessboard clustering and artificial bee colony routing method for energy‐efficient heterogeneous wireless sensor networks

Energy is an extremely critical resource for battery‐powered wireless sensor networks (WSNs), thus making energy‐efficient protocol design a key challenging problem. However, uneven energy consumption is an inherent problem in WSNs caused by multi‐hop routing and many‐to‐one traffic pattern among sensors. In this paper, we therefore propose a new clustering method called fuzzy chessboard clustering (FFC), which is capable to overcome the bottleneck problem and addressing the uneven energy consumption problem in heterogeneous WSNs. We also propose an energy‐efficient routing method called artificial bee colony routing method (ABCRM) to find the optimal routing path for the heterogeneous WSNs. ABCRM seeks to investigate the problems of balancing energy consumption and maximization of network lifetime. To demonstrate the effectiveness of FCC‐ABCRM in terms of lessening end‐to‐end delay, balancing energy consumption, and maximization of heterogeneous network lifetime, we compare our method with three approaches namely, chessboard clustering approach, PEGASIS, and LEACH. Simulation results show that the network lifetime achieved by FCC‐ABCRM could be increased by nearly 25%, 45%, and 60% more than that obtained by chessboard clustering, PEGASIS, and LEACH, respectively. Copyright © 2013 John Wiley & Sons, Ltd.     

Adaptive energy aware cluster-based routing protocol for wireless sensor networks

Wireless sensor networks (WSNs) have grown excessively due to their various applications and low installation cost. In WSN, the main concern is to reduce energy consumption among nodes while maintaining timely and reliable data forwarding. However, most of the existing energy aware routing protocols incur unbalanced energy consumption, which results in inefficient load balancing and compromised network lifetime. Therefore, the main target of this research paper is to present adaptive energy aware cluster-based routing (AECR) protocol for improving energy conservation and data delivery performance. Our proposed AECR protocol differs from other energy efficient routing schemes in some aspects. Firstly, it generates balance sized clusters based on nodes distribution and avoids random clusters formation. Secondly, it optimizes both intra-cluster and inter-cluster routing paths for improving data delivery performance while balancing data traffic on constructed forwarding routes and at the end, in order to reduce the excessive energy consumption and improving load distribution, the role of Cluster Head (CH) is shifted dynamically among nodes by exploit of network conditions. Simulation results demonstrate that AECR protocol outperforms state of the art in terms of various performance metrics.

     

A boolean spider monkey optimization based energy efficient clustering approach for WSNs

Wireless sensor network (WSN) consists of densely distributed nodes that are deployed to observe and react to events within the sensor field. In WSNs, energy management and network lifetime optimization are major issues in the designing of cluster-based routing protocols. Clustering is an efficient data gathering technique that effectively reduces the energy consumption by organizing nodes into groups. However, in clustering protocols, cluster heads (CHs) bear additional load for coordinating various activities within the cluster. Improper selection of CHs causes increased energy consumption and also degrades the performance of WSN. Therefore, proper CH selection and their load balancing using efficient routing protocol is a critical aspect for long run operation of WSN. Clustering a network with proper load balancing is an NP-hard problem. To solve such problems having vast search area, optimization algorithm is the preeminent possible solution. Spider monkey optimization (SMO) is a relatively new nature inspired evolutionary algorithm based on the foraging behaviour of spider monkeys. It has proved its worth for benchmark functions optimization and antenna design problems. In this paper, SMO based threshold-sensitive energy-efficient clustering protocol is proposed to prolong network lifetime with an intend to extend the stability period of the network. Dual-hop communication between CHs and BS is utilized to achieve load balancing of distant CHs and energy minimization. The results demonstrate that the proposed protocol significantly outperforms existing protocols in terms of energy consumption, system lifetime and stability period.     

Upstream congestion control in wireless sensor networks through cross-layer optimization

Congestion in wireless sensor networks not only causes packet loss, but also leads to excessive energy consumption. Therefore congestion in WSNs needs to be controlled in order to prolong system lifetime. In addition, this is also necessary to improve fairness and provide better quality of service (QoS), which is required by multimedia applications in wireless multimedia sensor networks. In this paper, we propose a novel upstream congestion control protocol for WSNs, called priority-based congestion control protocol (PCCP). Unlike existing work, PCCP innovatively measures congestion degree as the ratio of packet inter-arrival time along over packet service time. PCCP still introduced node priority index to reflect the importance of each sensor node. Based on the introduced congestion degree and node priority index, PCCP utilizes a cross-layer optimization and imposes a hop-by-hop approach to control congestion. We have demonstrated that PCCP achieves efficient congestion control and flexible weighted fairness for both single-path and multi-path routing, as a result this leads to higher energy efficiency and better QoS in terms of both packet loss rate and delay.     

Congestion control in wireless sensor and 6LoWPAN networks: toward the Internet of Things

The Internet of Things (IoT) is the next big challenge for the research community where the IPv6 over low power wireless personal area network (6LoWPAN) protocol stack is a key part of the IoT. Recently, the IETF ROLL and 6LoWPAN working groups have developed new IP based protocols for 6LoWPAN networks to alleviate the challenges of connecting low memory, limited processing capability, and constrained power supply sensor nodes to the Internet. In 6LoWPAN networks, heavy network traffic causes congestion which significantly degrades network performance and impacts on quality of service aspects such as throughput, latency, energy consumption, reliability, and packet delivery. In this paper, we overview the protocol stack of 6LoWPAN networks and summarize a set of its protocols and standards. Also, we review and compare a number of popular congestion control mechanisms in wireless sensor networks (WSNs) and classify them into traffic control, resource control, and hybrid algorithms based on the congestion control strategy used. We present a comparative review of all existing congestion control approaches in 6LoWPAN networks. This paper highlights and discusses the differences between congestion control mechanisms for WSNs and 6LoWPAN networks as well as explaining the suitability and validity of WSN congestion control schemes for 6LoWPAN networks. Finally, this paper gives some potential directions for designing a novel congestion control protocol, which supports the IoT application requirements, in future work.

     

A gradient‐based multiple‐path routing protocol for low duty‐cycled wireless sensor networks

Routing in a low duty‐cycled wireless sensor network (WSN) has attracted much attention recently because of the challenge that low duty‐cycled sleep scheduling brings to the design of efficient distributed routing protocols for such networks. In a low duty‐cycled WSN, a big problem is how to design an efficient distributed routing protocol, which uses only local network state information while achieving low end‐to‐end (E2E) packet delivery delay and also high packet delivery efficiency. In this paper, we study low duty‐cycled WSNs wherein sensor nodes adopt pseudorandom sleep scheduling for energy saving. The objective of this paper is to design an efficient distributed routing protocol with low overhead. For this purpose, we design a simple but efficient hop‐by‐hop routing protocol, which integrates the ideas of multipath routing and gradient‐based routing for improved routing performance. We conduct extensive simulations, and the results demonstrate the high performance of the proposed protocol in terms of E2E packet delivery latency and packet delivery efficiency as compared with existing protocols. Copyright © 2014 John Wiley & Sons, Ltd.     

EOMR: An Energy-Efficient Optimal Multi-path Routing Protocol to Improve QoS in Wireless Sensor Network for IoT Applications

The wireless sensor network based IoT applications mainly suffers from end to end delay, loss of packets during transmission, reduced lifetime of sensor nodes due to loss of energy. To address these challenges, we need to design an efficient routing protocol that not only improves the network performance but also enhances the Quality of Service. In this paper, we design an energy-efficient routing protocol for wireless sensor network based IoT application having unfairness in the network with high traffic load. The proposed protocol considers three-factor to select the optimal path, i.e., lifetime, reliability, and the traffic intensity at the next-hop node. Rigorous simulation has been performed using NS-2. Also, the performance of the proposed protocol is compared with other contemporary protocols. The results show that the proposed protocol performs better concerning energy saving, packet delivery ratio, end-to-end delay, and network lifetime compared to other protocols.

     

An Improved Fuzzy Unequal Clustering Algorithm for Wireless Sensor Network

This paper introduces IFUC, which is an Improved Fuzzy Unequal Clustering scheme for large scale wireless sensor networks (WSNs).It aims to balance the energy consumption and prolong the network lifetime. Our approach focuses on energy efficient clustering scheme and inter-cluster routing protocol. On the one hand, considering each node’s local information such as energy level, distance to base station and local density, we use fuzzy logic system to determine each node’s chance of becoming cluster head and estimate the cluster head competence radius. On the other hand, we use Ant Colony Optimization (ACO) method to construct the energy-aware routing between cluster heads and base station. It reduces and balances the energy consumption of cluster heads and solves the hot spots problem that occurs in multi-hop WSN routing protocol to a large extent. The validation experiment results have indicated that the proposed clustering scheme performs much better than many other methods such as LEACH, CHEF and EEUC.     

A cluster‐based fault‐tolerant routing protocol for wireless sensor networks

Energy conservation and fault tolerance are two critical issues in the deployment of wireless sensor networks (WSNs). Many cluster‐based fault‐tolerant routing protocols have been proposed for energy conservation and network lifetime maximization in WSNs. However, these protocols suffer from high frequency of re‐clustering as well as extra energy consumption to tolerate failures and consider only some very normal parameters to form clusters without any verification of the energy sufficiency for data routing. Therefore, this paper proposes a cluster‐based fault‐tolerant routing protocol referred as CFTR. This protocol allows higher energy nodes to become Cluster Heads (CHs) and operate multiple rounds to diminish the frequency of re‐clustering. Additionally, for the sake to get better energy efficiency and balancing, we introduce a cost function that considers during cluster formation energy cost from sensor node to CH, energy cost from CH to sink, and another significant parameter, namely, number of cluster members in previous round. Further, the proposed CFTR takes care of nodes, which have no CH in their communication range. Also, it introduces a routing algorithm in which the decision of next hop CH selection is based on a cost function conceived to select routes with sufficient energy for data transfer and distribute uniformly the overall data‐relaying load among the CHs. As well, a low‐overhead algorithm to tolerate the sudden failure of CHs is proposed. We perform extensive simulations on CFTR and compare their results with those of two recent existing protocols to demonstrate its superiority in terms of different metrics.     

A Tabu search based routing algorithm for wireless sensor networks

In this paper, a Tabu search based routing algorithm is proposed to efficiently determine an optimal path from a source to a destination in wireless sensor networks (WSNs). There have been several methods proposed for routing algorithms in wireless sensor networks. In this paper, the Tabu search method is exploited for routing in WSNs from a new point of view. In this algorithm (TSRA), a new move and neighborhood search method is designed to integrate energy consumption and hop counts into routing choice. The proposed algorithm is compared with some of the ant colony optimization based routing algorithms, such as traditional ant colony algorithm, ant colony optimization-based location-aware routing for wireless sensor networks, and energy and path aware ant colony algorithm for routing of wireless sensor networks, in term of routing cost, energy consumption and network lifetime. Simulation results, for various random generated networks, demonstrate that the TSRA, obtains more balanced transmission among the node, reduces the energy consumption and cost of the routing, and extends the network lifetime.     

Flower pollination algorithm‐based energy‐efficient stable clustering approach for WSNs

The advances in the size, cost of deployment, and user‐friendly interface of wireless sensor devices have given rise to many wireless sensor network (WSN) applications. WSNs need to use protocols for transmitting data samples from event regions to sink through minimum cost links. Clustering is a commonly used method of data aggregation in which nodes are organized into groups to reduce energy consumption. Nonetheless, cluster head (CH) has to bear an additional load in clustering protocols to organize different activities within the cluster. Proper CH selection and load balancing using efficient routing protocol is therefore a critical aspect for WSN's long‐term operation. In this paper, a threshold‐sensitive energy‐efficient cluster‐based routing protocol based on flower pollination algorithm (FPA) is proposed to extend the network's stability period. Using FPA, multihop communication between CHs and base station is used to achieve optimal link costs for load balancing distant CHs and energy minimization. Analysis and simulation results show that the proposed algorithm significantly outperforms competitive clustering algorithms in terms of energy consumption, stability period, and system lifetime.     

DEICA: A differential evolution-based improved clustering algorithm for IoT-based heterogeneous wireless sensor networks

With the evolution of technology, many modern applications like habitat monitoring, environmental monitoring, disaster prediction and management, and telehealth care have been proposed on wireless sensor networks (WSNs) with Internet of Things (IoT) integration. However, the performance of these networks is restricted because of the various constraints imposed due to the participating sensor nodes, such as nonreplaceable limited power units, constrained computation, and limited storage. Power limitation is the most severe among these restrictions. Hence, the researchers have sought schemes enabling energy-efficient network operations as the most crucial issue. A metaheuristic clustering scheme is proposed here to address this problem, which employs the differential evolution (DE) technique as a tool. The proposed scheme achieves improved network performance via the formulation of load-balanced clusters, resulting in a more scalable and adaptable network. The proposed scheme considers multiple parameters such as nodes' energy level, degree, proximity, and population for suitable network partitioning. Through various simulation results and experimentation, it establishes its efficacy over state-of-the-art schemes in respect of load-balanced cluster formation, improved network lifetime, network resource utilization, and network throughput. The proposed scheme ensures up to 57.69%, 33.16%, and 57.74% gains in network lifetime, energy utilization, and data packet delivery under varying network configurations. Besides providing the quantitative analysis, a detailed statistical analysis has also been performed that describes the acceptability of the proposed scheme under different network configurations.