On-column coaxial flow chemiluminescence detection for underivatized amino acids by pressurized capillary electrochromatography using a monolithic column

A new method for pressurized capillary electrochromatography (pCEC) coupling with chemiluminescence (CL) detection using a modified on-column coaxial flow detection interface was developed. To evaluate the feasibility and reliability of the experimental setup, the typical CL compounds luminol and isoluminol were separated and detected by using this pCEC-CL system. A detailed investigation of CL detection interface and postcolumn CL reagent flow rate parameters was described. The excellent resolution and detection sensitivity was achieved by using 3-microm ODS-C18 packed column with 30% ACN (v/v), 5 mmol/L phosphate buffer (pH 8.0). Moreover, with the presence of Co(II) (1.0 x 10(-4) mol/L) in the mobile phase, the linear range of the concentration for luminol was 2.0 x 10(-9)-2.0 x 10(-6) mol/L with a detection limit (S/N = 3) of 2.0 x 10(-10) mol/L, and 2.5 x 10(4) theoretical plates was achieved. In addition, separation and detection of the underivatized amino acids (l-threonine and l-tyrosine) were accomplished by using a polymerized monolithic column based on the principle of the luminol-H2O2-Cu(II)-amino acid CL system. Under the optimum conditions, the mixture of amino acids was efficiently separated with satisfactory results.     

Analysis of underivatized amino acids and their D/L-enantiomers by sheathless capillary electrophoresis/electrospray ionization mass spectrometry

Capillary electrophoresis/electrospray ionization-mass spectrometry (CE/ESI-MS) was applied to the analysis of underivatized amino acids and the separation of their D/L-enantiomers. Under full-scan mode, all standard protein amino acids were separated and detected at low-femtomole levels using a 130-cm-long, 20-microm-i.d., 150-microm-o.d. underivatized fused-silica capillary with 1 M formic acid as the background electrolyte. The CE/ESI-MS technique was also applied to the separation of L-arginine from L-canavanine (a close analogue of arginine where the terminal methylene linked to the guanidine group of arginine is replaced by an oxygen atom) in a complex mixture containing all standard protein amino acids. The utility of CE/ESI-MS in the analysis of real-world samples was demonstrated by the identification of two metabolic diseases (PKU and tyrosinemia) through blood analysis with minimal sample preparation. In addition, the on-line separation of 11 underivatized L-amino acids from their D-enantiomers was achieved by using a 30 mM solution of (+)-(18-crown-6)-2,3,11,12-tetracarboxylic acid as the background electrolyte.     

Comparison of pulsed coulometric detection and potential-sweep pulsed coulometric detection for underivatized amino acids in liquid chromatography

Pulsed coulometric detection (PCD) and potential-sweep pulsed coulometric detection (PS-PCD) are applied to the direct detection of amino acids in protein hydrolyzates. The detection mechanisms are based upon surface-catalyzed oxidation of the amine functionalities activated by the transient formation of surface oxide on Au electrodes. PCD uses a triple-step potential waveform in which the integration of electrode current at a constant potential is followed by anodic and cathodic polarizations to clean and reactivate the electrode surface. PS-PCD incorporates a cyclic potential sweep into the triple-step waveform which proceeds through the formation and subsequent removal of the surface oxide with simultaneous current integration. Reactions catalyzed by the formation of the noble metal oxide can be monitored in PS-PCD with the automatic rejection of the surface oxide background. A significant decrease is obtained also in the fluctuation and drift in the base line resulting from gradient elution and variations of the electrode surface. PCD and PS-PCD following gradient elution chromatography are demonstrated to allow for the direct detection of 20 amino acids including secondary amino acids. Detection limits for lysine are ca. 220 ppb (11 ng, 75 pmol) by PCD and 60 ppb (3 ng, 19 pmol) by PS-PCD applied at gold electrodes.     

Direct determination of carbohydrates, amino acids, and antibiotics by microchip electrophoresis with pulsed amperometric detection

The separation and detection of underivatized carbohydrates, amino acids, and sulfur-containing antibiotics in an electrophoretic microchip with pulsed amperometric detection (PAD) is described. This report also describes the development of a new chip configuration for microchip electrophoresis with PAD. The configuration consists of a layer of poly(dimethylsiloxane) that contains the microfluidic channels, reservoirs, and a gold microwire, sealed to a second layer of poly(dimethylsiloxane). Example separations of carbohydrates, amino acids, and sulfur-containing antibiotics are shown. The effect of the separation and injection potentials, buffer pH and composition, injection time, and PAD parameters were studied in an effort to optimize separations and detection. Detection limits ranging from 6 fmol (5 microM) for penicillin and ampicillin to 455 fmol (350 microM) for histidine were obtained.     

Electrogenerated chemiluminescence detection of amino acids based on precolumn derivatization coupled with capillary electrophoresis separation

A novel method for highly sensitive detection of primary and secondary amino acids with selective derivatization using acetaldehyde as a new derivatization reagent was proposed by capillary electrophoresis (CE) coupled with electrogenerated chemiluminescence (ECL) of tris(2,2'-bipyridine)ruthenium(II). The precolumn derivatization of these amino acids with acetaldehyde was performed in aqueous solution at room temperature for 1 h. Upon optimized derivatization, the ECL intensities and detection sensitivities of the amino acids were significantly enhanced by 20-70 times. Using four amino acids, arginine, proline, valine, and leucine, as model compounds, their derivatives could be completely separated by CE and sensitively detected by ECL within 22 min. The linear ranges were 0.5-100 microM for arginine and proline and 5-1000 microM for valine and leucine with the detection limits of 1 x 10(-7) (0.5 fmol, arginine), 8 x 10(-8) (0.4 fmol, proline), 1 x 10(-6) (5 fmol, valine), and 1.6 x 10(-6) M (8 fmol, leucine) at a signal-to-noise ratio of 3. The derivatization reactions and ECL process of amino acids were also proposed based on in situ Fourier transform infrared and ultraviolet spectrometric analyses.     

Positively charged sol-gel coatings for on-line preconcentration of amino acids in capillary electrophoresis

A novel on-line method is presented for the extraction and preconcentration of amino acids using a sol-gel-coated column coupled to a conventional UV/visible detector. The presented approach does not require any additional modification of the commercially available standard CE instrument. Extraction, stacking, and focusing techniques were used in the preconcentration procedures. Sol-gel coatings were created by using N-octadecyldimethyl[3-(trimethoxysilyl)propyl]ammonium chloride (C18-TMS) in the coating sol solutions. Due to the presence of a positively charged quaternary ammonium moiety in C18-TMS, the resulting sol-gel coating carried a positive charge. For extraction, the pH of the samples was properly adjusted to impart a net negative charge to amino acids. A long plug of the sample was then passed through the sol-gel-coated capillary to facilitate extraction via electrostatic interaction between the positively charged sol-gel coating and the negatively charged amino acid molecules. Focusing of the extracted amino acids was accomplished through desorption of the extracted amino acid molecules carried out by local pH change. Two different methods are described. Both methods showed excellent extraction and preconcentration effects. Preconcentration results obtained on sol-gel-coated columns were compared with the CZE analysis performed on bare fused-silica columns with traditional sample injections. The described procedure provided a 150,000-fold enrichment effect for alanine. The two methods provided acceptable repeatability in terms of both peak height and migration time.     

Heart-cutting two-dimensional capillary electrophoresis for the on-line purification and separation of derivatized amino acids

Heart-cutting two-dimensional (2D) capillary electrophoresis (CE) in a single capillary was used for analysis of derivatized amino acids. A mixture of 12 amino acids derivatized with UV-active benzyl 4-(3-(2-chloroethyl)-3-nitrosoureido)butylcarbamate label served as a model of a moderately complex sample due to the presence of numerous derivatization byproducts. The first step of the heart-cutting 2D approach was sample cleanup by capillary zone electrophoresis (CZE) in borate electrolyte. Then, only a selected portion of the first-dimension separation was transferred into the second dimension of the separation by a specific voltage and pressure program. Finally, the zone of derivatized amino acids was separated by micellar electrokinetic chromatography in a borate-sodium dodecyl sulfate system. The whole 2D process can be performed in a conventional CE analyzer without any interface for connection of the two separation modes. Intraday repeatability of the total migration time was 2%. In general, the heart-cutting 2D-CE methodology in a single capillary can be adapted for any CE mode regardless of the direction and velocity of electroosmotic flow and position of the fraction of interest in the first dimension (i.e., first, last, or intermediate fraction).     

Contactless conductivity detection for capillary electrophoresis

A contactless capacitively coupled conductivity detector for capillary electrophoresis is introduced. The detector consists of two electrodes which are placed cylindrically around the outer polyimide coating of the fused-silica capillary with a detection gap of 2 mm. The electrodes form a cylindrical capacitor, and the electric conductivity of the solution in the gap between the electrodes is measured. A high audio or low ultrasonic frequency for coupling of the ac voltage is used in order to minimize the influence of reactance of the liquid. For an improved version of the detector, two syringe cannulas are used as the electrodes and the capillary is simply assembled into the tubing. This allows an easy placement of the detector on various positions along the capillary. The limit of detection of inorganic cations and anions is 200 ppb, as determined for sodium and chloride, respectively.     

Passive conductivity detection for capillary electrophoresis

A passive electrochemical detection principle that can be applied to capillary electrophoresis is presented. The separation electrical field is used to generate a potential difference between two electrodes located along the channel. For constant-current electrophoresis, the generated signal is proportional to the resistance of the solution passing between the two electrodes. Contrary to conductivity detectors that are ac driven and need to be decoupled from the separation field, the passive detection directly takes advantage of the separation field. The signal is simply measured by a high-impedance voltmeter. The detection concept has been validated by numerical simulations showing how the magnitude of the signal is related to the ratio between the electrode distance and the length of the sample plug. As a proof of the principle, this detection concept has been demonstrated by the electrophoretic separation of three alkali ions on a polymer microchip. Based on preliminary results, a detection limit of 20 microM and a dynamic range of up to 3 orders of magnitude have been achieved.     

Attomole amino acid determination by capillary zone electrophoresis with thermooptical absorbance detection

Attomole quantities of 4-(dimethylamino)azobenzene-4'-sulfonyl chloride derivatized amino acids are separated by using capillary zone electrophoresis in a mixed acetonitrile/aqueous buffer system. Detection is performed with an on-column thermooptical absorbance detection technique based on a 130-mW argon ion pump laser. Detection limits for the concentration of analyte injected onto the column range from 5 x 10(-8) M for methionine to 5 x 10(-7) M for aspartic acid. Only 37 amol of methionine and 450 amol of aspartic acid are contained within the subnanoliter injection volume. It is interesting to note that these limits are a factor of 4 superior to the best fluorescence detection limit reported for chromatographic separation of amino acids. A subnanoliter sample of derivatized human urine was analyzed with this technique; quantities of amino acids contained within the sample are 3 orders of magnitude greater than the detection limit.     

On-column electrochemical detection for microchip capillary electrophoresis

The development of a cellulose acetate decoupler for on-column electrochemical detection in microchip capillary electrophoresis is presented. The capillary based laser-etched decoupler is translated to the planar format to isolate the detector circuit from the separation circuit. The decoupler is constructed by aligning a series of 20 30-microm holes through the coverplate of the microchip with the separation channel and casting a thin film of cellulose acetate within the holes. The decoupler shows excellent isolation of the detection circuit for separation currents up to 60 microA, with noise levels at or below 1 pA at a carbon fiber electrode. Detection limits of 25 nM were achieved for dopamine. This decoupler design combines excellent mechanical stability, effective shunting of high separation currents, and ease of manufacture.     

CMOS absorbance detection system for capillary electrophoresis

This paper presents a cost-effective portable photodetection system for capillary electrophoresis absorptiometry. By using a CMOS BDJ (buried double p–n junction) detector, a dual-wavelength method for absorbance measurement is implemented. This system includes associated electronics for low-noise pre-amplification and A/D conversion, followed by digital signal acquisition and processing. Two signal processing approaches are adopted to enhance the signal to noise ratio. One is variable time synchronous detection, which optimizes the sensitivity and measuring rate compared to a conventional synchronous detection technique. The other is a statistical approach based on principal component analysis, which allows optimal estimation of detected signal. This system has been designed and tested in capillary electrophoresis conditions. Its operation has been verified with performances comparable to those of a commercialized spectrophotometric system (HP-3D CE). With potential on-chip integration of associated electronics, it may be operated as an integrable detection module for microchip electrophoresis and other microanalysis systems.     

Surface plasmon resonance detection for capillary electrophoresis separations

A miniaturized surface plasmon resonance sensor has been used as an on-line detector for capillary electrophoresis separations. The capillary was modified slightly to shield the sensor electronics from the high voltages applied during the separation. A three-component mixture of high refractive index materials was separated and detected at the millimolar level by an untreated gold-sensing surface. A simple protein immobilization procedure was used to functionalize the surface for selective protein detection. A hybrid buffer system was developed, in which both the deposition of immobilized protein layers and the electrophoretic delivery of protein analytes were optimized. The detection system has a reproducibility of 15%, a dynamic range of 3 orders of magnitude, and a detection limit for IgG of 2 fmol.     

Condensation nucleation light scattering detection for capillary electrophoresis

We describe two means for interfacing condensation nucleation light scattering detection to capillary electrophoresis (CE). With the first method, a fused-silica capillary was used for the separation and the CE was grounded through a Nafion membrane that also connected the system to a microconcentric pneumatic nebulizer. Limits of detection (LODs) for underivatized amino acids were at the low microgram per milliliter level, and separation efficiencies were ～9 times lower than the optimum predicted for these species based on the injection plug width and axial dispersion by diffusion. LODs were limited by background nonvolatiles resulting from dissolution of fused silica at the high pHs used for the separations. An alternate system employed PEEK capillaries which acted as the separation capillary and also as the inner nebulizer capillary. In this case, the exit end of the capillary was coated with conductive paint which extended to the tip of the nebulizer, was in contact with the CE buffer, and was grounded to complete the CE circuit. Response was nonlinear and the separation efficiency of this system was somewhat lower than that for the Nafion membrane system. Response as peak heights for all of the amino acids and peptides studied was nearly identical on a mass basis. With this system, much lower background signals were obtained, and as a result, LODs for underivatized amino acids and peptides were below the 1 μg/mL level, corresponding to less than 10 pg or less than 100 fmol injected. Both systems were fairly simple, effective means to generate aerosols with the low flows of CE and should be applicable to interfacing of other aerosol-based detectors with CE.     

Phase-sensitive fluorescence lifetime detection in capillary electrophoresis

A simple and highly sensitive fluorescence lifetime detection method for capillary electrophoresis has been introduced. The detection scheme is based on the integrated phase-sensitive fluorescence intensity. The integrative nature of the method results in high sensitivity of lifetime detection. The limit of detection is 7.8 amol of fluorescein injected, representing a 2 orders of magnitude improvement over the detection limits previously reported in the UV-visible region. Rayleigh scattering, Raman scattering, and background fluorescence can be effectively suppressed by setting the detector out of the phase from the background signal. Fluorescence background can be eliminated whether the fluorescence lifetime of the background is longer or shorter than the solute molecules of interest. The signal-to-noise ratio of measurements is optimized by varying the modulation frequency and the detector phase angle.     

Microchip capillary electrophoresis with electrochemical detection

A novel microchip capillary electrophoresis system with electrochemical detection, using the replaceable microelectrode, is first reported. This kind of electrode can be fabricated in general laboratories and can be replaced quickly with electrodes of different materials according to the requirements of experiments. The end-column electrochemical detection on microchip CE was achieved by fixing the working electrode (such as carbon fiber, Pt, or Au, etc.) through a guide tube on the end of the separation channel. The experiment results indicate that the alignment of the electrode with the channel outlet can be carried out accurately and reproducibly, and therefore, the detection device has low noise and good reproducibility. The detection limit of dopamine is 2.4 x 10(-7) M, which is the lowest result reported so far. The separation and detection of dopamine, 5-hydroxytryptamine and epinephrine using carbon fiber and Pt microdisk electrodes within 50 s was successfully performed.     

Sheath-flow cuvette for high-sensitivity laser-induced fluorescence detection in capillary electrophoresis

The sheath-flow cuvette is a key component in a high-sensitivity post-column laser-induced fluorescence detector for capillary electrophoresis. Most designs are based on commercial cuvettes originally manufactured for use in a flow cytometer. In these devices, a quartz flow chamber is held in a stainless-steel fixture that is difficult to machine and subjects the cuvette to a torque when sealed, which frequently leads to damage of the flow chamber. In this report we present a design for a cuvette that may easily be constructed. This design uses compression to hold and seal the quartz flow chamber without applying torque. The system produces detection limits (3sigma) of 115 yoctomoles (70 copies) for FQ-labeled carbonic anhydrase.     

On-chip contactless four-electrode conductivity detection for capillary electrophoresis devices

In this contribution, a capillary electrophoresis microdevice with an integrated on-chip contactless four-electrode conductivity detector is presented. A 6-cm-long, 70-microm-wide, and 20-microm-deep channel was etched in a glass substrate that was bonded to a second glass substrate in order to form a sealed channel. Four contactless electrodes (metal electrodes covered by 30-nm silicon carbide) were deposited and patterned on the second glass substrate for on-chip conductivity detection. Contactless conductivity detection was performed in either a two- or a four-electrode configuration. Experimental results confirmed the improved characteristics of the four-electrode configuration over the classical two-electrode detection setup. The four-electrode configuration allows for sensitive detection for varying carrier-electrolyte background conductivity without the need for adjustment of the measurement frequency. Reproducible electrophoretic separations of three inorganic cations (K+, Na+, Li+) and six organic acids are presented. Detection as low as 5 microM for potassium was demonstrated.