共查询到20条相似文献,搜索用时 78 毫秒
1.
《农药》2021,(7)
[目的]明确25%苯唑氟草酮·莠去津OD防治春玉米田杂草药效及对后茬作物安全性。[方法]通过小区试验的方法验证并评价25%苯唑氟草酮·莠去津OD对春玉米田杂草药效及后茬作物安全性。[结果]25%苯唑氟草酮·莠去津OD 1125、1875 g a.i./hm~2剂量时对春玉米田稗草、马唐、苘麻和反枝苋总株数防效可达94%以上,显著高于对照药剂6%苯唑氟草酮可分散油悬浮剂90 g a.i./hm~2、90%莠去津水分散粒剂810 g a.i./hm~2、10%硝磺草酮可分散油悬浮剂150 g a.i./hm~2,同时后茬作物小麦、花生、大豆在种植15 d后,各处理区的出苗率均达90%以上,生长中期和成熟期株高、鲜重、叶色、分蘖数、产量与对照区无明显差异。[结论]在玉米3~5叶期使用25%苯唑氟草酮·莠去津OD 937.5、1125、1875 g a.i./hm~2剂量时,可有效防除春玉米田稗草、马唐、苘麻、反枝苋,对玉米以及后茬作物小麦、花生和大豆安全。 相似文献
2.
为明确75%磺酰磺隆WG对春小麦田杂草的防除效果及对当季春小麦和后茬作物的安全性影响,采用茎叶喷雾处理进行了田间药效试验。结果表明:施药后45 d,75%磺酰磺隆WG 10~40 g/hm2对北方春小麦田稗草、狗尾草、藜和卷茎蓼株防效和鲜重防效均在84.8%以上,且对春小麦安全。75%磺酰磺隆WG对当季后茬敏感作物白菜、油菜、生菜的根长、株鲜重有不同程度的抑制作用。75%磺酰磺隆WG在春小麦田喷雾使用可以有效防除禾本科杂草和阔叶杂草,但当季后茬不能种植敏感作物白菜、油菜、生菜。 相似文献
3.
4.
通过温室盆栽试验,评价了唑草酮作苗后茎叶处理对夏玉米田具有代表性的优势种阔叶杂草苘麻及反枝苋除草活性及对作物玉米的安全性.结果表明:40%唑草酮水分散粒剂作苗后茎叶处理对目前玉米田难以防治的阔叶杂草苘麻活性较高,施药后18 d,24.0 g a.i./hm2处理鲜重防效为94.51%,对反枝苋鲜重防效为63.73%,24.0~60.0 g a.i./hm2处理对玉米的鲜重抑制率为4.79%~7.50%.与生产上常用对照药剂380 g/L莠去津悬浮剂相比较,对玉米的生长有一定影响,但对杂草的致死速度快,对后茬作物小麦等作物安全. 相似文献
5.
6.
杂草对苯磺隆的抗药性及残留药害对后茬作物的安全性 总被引:6,自引:0,他引:6
对1989-2006年的20篇75%苯磺隆DF田间药效试验报告进行分析,在麦田草相和施药条件基本相同、连续应用苯磺隆10年后,同剂量处理防效下降,呈现出杂草对苯磺隆抗药性逐年增强的趋势.苯磺隆残留药害试验结果表明:75%苯磺隆DF秋季施药8.44~22.50 g a.I./hm2处理对后茬花生、大豆、棉花安全,春季施药8.44~11.25 g a.I./hm2处理对后茬花生、大豆、棉花安全,22.50~45.00 g a.I./hm2剂量对后茬花生有较重的药害减产现象,45.00 g a.I./hmM2处理对后茬大豆、棉花有较明显残留药害. 相似文献
7.
[目的]通过田间药效试验明确55%苯磺隆·噻吩磺隆水分散粒剂对冬小麦田阔叶杂草的防治效果和田间推荐使用剂量。[方法]小麦返青后、拔节前,一次性喷药后于不同时期调查杂草防效和对小麦影响。[结果]55%苯磺隆·噻吩磺隆水分散粒剂的田间推荐用量为24.75~33 g a.i./hm2。施药28 d后对杂草株数总体防效达81.70%~99.00%,鲜质量总体防效达90.73%~99.33%。[结论]55%苯磺隆·噻吩磺隆水分散粒剂能够有效防除冬小麦田阔叶杂草并对小麦具有较好的安全性。 相似文献
8.
9.
使用安全、高效的苗前封闭除草剂有利于大豆玉米带状复合种植作物的正常生长发育。本试验选择6种除草剂组合,对大豆玉米带状复合种植田块在播后苗前进行土壤封闭处理,研究不同除草剂处理组合对杂草的防效和对大豆、玉米生长发育的影响。结果表明,6种除草剂组合处理对大豆和玉米生长安全且对杂草均有不同程度的防除效果。其中,960 g/L精异丙甲草胺EC 90 mL/667 m2和80%唑嘧磺草胺WG 4 g/667 m2的处理组合对田间主要杂草的防效最好,其对杂草总株防效在施药后15、30 d和60 d分别为80.6%、70.0%和65.0%,杂草总鲜重防效在施药后60 d为79.5%,显著高于其他药剂组合。本研究为大豆玉米带状复合种植模式下的杂草防除提供了理论依据和科学指导。 相似文献
10.
11.
12.
13.
Dinesh Singh J. K. Gehlawat Musti S. Rao 《Journal of chemical technology and biotechnology (Oxford, Oxfordshire : 1986)》1990,47(2):127-136
Oslefins and diolefins are important intermediates in the petrochemical industry and the future promises a further substantial increase in demand. While several catalysts have been formulated in the past for the abstraction of hydrogen from butenes and propylene, these catalysts are inefficient in the abstraction of first hydrogen from butane. Bismuth molybdates (β and γ-phases) containing iron oxide and supported on alumina are used as catalysts in the present investigation on the oxidative dehydrogenation of n-butane. Effects of catalyst content, temperature and oxygen: n-butane ratio on conversion and selectivity to butadiene and (C4H8 + C4H6) are studied in the following ranges of experimental conditions: β-bismuth molybdate/100 mol support I(K), 3–9; γ-bismuth molybdate/100 mol support I(K), 5-20; temperature, 400–500°C; O2: butane ratio, 0.6:1.7. 相似文献
14.
考登钢作为一种高耐候结构钢,广泛应用于各个领域。在火力发电方面,考登钢主要应用在工作环境比较恶劣的烟气加热器和空气预热器中。考登钢表面涂搪的目的就是进一步提高其耐腐蚀性能,延长使用寿命。为了提高考登钢元件的使用寿命,对考登钢表面涂搪瓷的可行性、密着性能、瓷釉、工艺控制、质量保证等方面进行了研究。 相似文献
15.
A viscometer used to measure the viscosity of 10 μl of a liquid, must be miniaturized down, and the liquid velocity gradient in the channel used to determine the viscosity coefficient. Two major factors that affect the liquid velocity are the mechanical forces exerted by the mechanical motors and electromagnetic forces. In this study, electrowetting on dielectric (EWOD) is adopted to drive liquids. Variously sized electrodes on a chip, and two shapes of channel are employed to measure the velocity gradient to determine the viscosity coefficient. The device is fabricated by microelectromechanical system (MEMS) technology. The dielectric layer used in EWOD has a high dielectric constant, BST (Ba0.7Sr0.3TiO3), to reduce the required applied voltage; its surface is coated with hydrophobic polymer, polytetrafluoro-ethylene (PTFE, Teflon® AF DuPont). Experimental results demonstrate that liquids can be pulled at 660 μm/s in linear channels by applying a voltage of 15 V. 相似文献
16.
17.
18.
In reexamining medium effects on photochemical reactions, we have emphasized those on unequilibrated excited species such as the Franck-Condon species. Despite recent advances in femtochemistry, such a discussion in molecular photochemistry is uncommon, and the problem remains challenging on account of the extremely short-lived excited species. However, in such cases, a small perturbation resulting from, for example, weak guest-host interactions could turn into a determining factor in dictating the course of a photochemical channel of deactivation. Examples of medium-directed diabatic processes have been examined with this idea in mind. A modified view on rhodopsin photoisomerization is presented along with the consideration that confinement does not necessarily lead to inhibition of reactions of the trapped substrate. 相似文献
19.
研究了温度和pH值对漆酶酶活以及漆酶处理纤维压制纤维板性能的影响。结果表明,pH较低、温度较高时漆酶酶活较高,压制的纤维板强度性能较好。但温度太高(60~80℃),延长加热时间,漆酶稳定性变差,酶活明显降低,压制纤维板的强度下降。 相似文献
20.
采用实验方法考察工艺参数对沉降斑的影响。基于一个带凸台的平板模具,采用L27(313)正交矩阵进行实验,研究了几何尺寸、熔体温度、注射时间、保压压力及保压时间对厚度突变处沉降斑形成的影响,同时还考虑了熔体温度和注射时间以及保压压力和注射时间之间的交互作用影响;通过性噪比分析和F检验优化成型工艺条件并对工艺参数的影响进行显著性分析。结果表明,对于厚度突变的平板制品,厚度突变的程度对其沉降斑形成的影响最大,其次为熔体温度,保压压力,保压时间等;采取减小厚度变化,降低熔体温度或增加保压压力和保压时间等措施,可以减小厚度突变处沉降斑,从而减少其对外观质量的影响;因素之间的交互作用对制品沉降斑的形成有一定的影响,熔体温度B和注射时间C之间的交互作用影响较为明显,而保压压力D和注射时间C之间的交互作用对该质量指标的影响最小,可以并入误差。 相似文献