Disclosing the crystallization behavior and morphology of poly(ϵ‐caprolactone) within poly(ϵ‐caprolactone)/poly(l‐lactide) blends

In this work, the effect of poly(l ‐lactide) (PLLA) components on the crystallization behavior and morphology of poly(?‐caprolactone) (PCL) within PCL/PLLA blends was investigated by polarized optical microscopy, DSC, SEM and AFM. Morphological results reveal that PCL forms banded spherulites in PCL/PLLA blends because the interaction between the two polymer components facilitates twisting of the PCL lamellae. Additionally, the average band spacing of PCL spherulites monotonically decreases with increasing PLLA content. With regard to the crystallization behaviors of PCL, the crystallization ability of PCL is depressed with increase of the PLLA content. However, it is interesting to observe that the growth rate of PCL spherulites is almost independent of the PLLA content while the overall isothermal crystallization rate of PCL within PCL/PLLA blends decreases first and then increases at a given crystallization temperature, indicating that the addition of PLLA components shows a weak effect on the growth rate of the PCL but mainly on the generation of nuclei. © 2018 Society of Chemical Industry     

Soft nanoconfinement effects on the crystallization behavior of asymmetric poly(ethylene oxide)‐block‐poly(ε‐ caprolactone) diblock copolymers

The time‐ and temperature‐related crystallization process for the structure transitions of asymmetric crystalline‐crystalline diblock copolymers from the melt to crystallites was investigated with synchrotron simultaneous small‐angle/wide‐angle X‐ray scattering. Two asymmetric poly(ethylene oxide)‐poly(ε‐caprolactone) diblock copolymers were chosen. It is found in the course of the copolymer crystallization that the shorter blocks are uncrystallizable in both of the asymmetric diblock copolymers and final lamellar structures are formed in both of them. The final lamellar structure was confirmed from atomic force microscopy observations. The small‐angle X‐ray scattering data collected were analyzed with different methods for the early stage of crystallization. Guinier and Debye‐Bueche plots indicate that there are neither isolated domains nor correlated domains formed before the formation of lamellae in the asymmetric diblock copolymers during the crystallization process. The structure evolution was calculated according to the correlation function, and the soft nanoconfined crystallization behavior is discussed. Copyright © 2012 Society of Chemical Industry     

Compatibilizing effect of starch‐grafted‐poly(L‐lactide) on the poly(ε‐caprolactone)/starch composites

The poly(ε‐caprolactone) (PCL)/starch blends were prepared with a coextruder by using the starch grafted PLLA copolymer (St‐g‐PLLA) as compatibilizers. The thermal, mechanical, thermo‐mechanical, and morphological characterizations were performed to show the better performance of these blends compared with the virgin PCL/starch blend without the compatibilizer. Interfacial adhesion between PCL matrix and starch dispersion phases dominated by the compatibilizing effects of the St‐g‐PLLA copolymers was significantly improved. Mechanical and other physical properties were correlated with the compatibilizing effect of the St‐g‐PLLA copolymer. With the addition of starch acted as rigid filler, the Young's modulus of the PCL/starch blends with or without compatibilizer all increased, and the strength and elongation were decreased compared with pure PCL. Whereas when St‐g‐PLLA added into the blend, starch and PCL, the properties of the blends were improved markedly. The 50/50 composite of PCL/starch compatibilized by 10% St‐g‐PLLA gave a tensile strength of 16.6 MPa and Young's modulus of 996 MPa, respectively, vs. 8.0 MPa and 597 MPa, respectively, for the simple 50/50 blend of PCL/starch. At the same time, the storage modulus of compatibilized blends improved to 2940 MPa. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Isothermal crystallization kinetics in binary miscible blend of poly(ε‐caprolactone)/tetramethyl polycarbonate

The crystallization kinetics of pure poly(ε‐caprolactone) (PCL) and its blends with bisphenol‐A tetramethyl polycarbonate (TMPC) was investigated isothermally as a function of composition and crystallization temperature (T_c) using differential scanning calorimetric (DSC) and polarized optical microscope techniques. Only a single glass‐transition temperature, T_g, was determined for each mixture indicating that this binary blend is miscible over the entire range of composition. The composition dependence of the T_g for this blend was well described by Gordon–Taylor equation with k = 1.8 (higher than unity) indicating strong intermolecular interaction between the two polymer components. The presence of a high T_g amorphous component (TMPC) had a strong influence on the crystallization kinetics of PCL in the blends. A substantial decrease in the crystallization kinetics was observed as the concentration of TMPC rose in the blends. The crystallization half‐time t_0.5 increased monotonically with the crystallization temperature for all composition. At any crystallization temperature (T_c) the t_0.5 of the blends are longer than the corresponding value for pure PCL. This behavior was attributed to the favorable thermodynamics interaction between PCL and TMPC which in turn led to a depression in the equilibrium melting point along with a simultaneous retardation in the crystallization of PC. The isothermal crystallization kinetics was analyzed on the basis of the Avrami equation. Linear behavior was held true for the augmentation of the radii of spherulites with time for all mixtures, regardless of the blend composition. However, the spherulites growth rate decreased exponentially with increasing the concentration of TMPC in the blends. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3307–3315, 2007     

Nonisothermal crystallization kinetics and thermomechanical properties of multiwalled carbon nanotube‐reinforced poly(ε‐caprolactone) composites

BACKGROUND: The technological development of poly(ε‐caprolactone) (PCL) is limited by its short useful lifespan, low modulus and high crystallinity. There are a few papers dealing with the crystallization behavior of carbon nanotube‐reinforced PCL composites. However, little work has been done on the crystallization kinetics of melt‐compounded PCL/multiwalled carbon nanotube (MWNT) nanocomposites. In this study, PCL/MWNT nanocomposites were successfully prepared by a simple melt‐compounding method, and their morphology and mechanical properties as well as their crystallization kinetics were studied. RESULTS: The MWNTs were observed to be homogeneously dispersed throughout the PCL matrix. The incorporation of a very small quantity of MWNTs significantly improved the storage modulus and loss modulus of the PCL/MWNT nanocomposites. The nonisothermal crystallization behavior of the PCL/MWNT nanocomposites exhibits strong dependencies of the degree of crystallinity (X_c), peak crystallization temperature (T_p), half‐time of crystallization (t_1/2) and Avrami exponent (n) on the MWNT content and cooling rate. The MWNTs in the PCL/MWNT nanocomposites exhibit a higher nucleation activity. The crystallization activation energy (E_a) calculated with the Kissinger model is higher when a small amount of MWNTs is added, then gradually decreases; all the E_a values are higher than that of pure PCL. CONCLUSION: This paper reports for the first time the preparation of high‐performance biopolymer PCL/MWNT nanocomposites prepared by a simple melt‐compounding method. The results show that the PCL/MWNT nanocomposites can broaden the applications of PCL. Copyright © 2008 Society of Chemical Industry     

Nonisothermal crystallization behaviors of poly(3‐hexylthiophene)/reduced graphene oxide nanocomposites

Poly(3‐hexylthiophene) (P3HT)/reduced graphene oxide (rGO) nanocomposites were prepared through in situ reduction of graphene oxide in the presence of P3HT. The nonisothermal crystallization behaviors of P3HT and P3HT/rGO nanocomposites were investigated by differential scanning calorimetry. The Avrami, Ozawa, and Mo models were used to analyze the nonisothermal kinetics. The addition of rGO remarkably increased the crystallization peak temperature and crystallinity of P3HT, but the crystallization half‐time revealed little variation. The crystallization activation energies were calculated by the Kissinger equation. The results suggested that rGO plays a twofold role in the nonisothermal crystallization of P3HT, that is, rGO promotes the crystallization of P3HT as nucleating agent, and meanwhile, it also restricts the motion of P3HT chains. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Nonisothermal crystallization kinetics of poly(ethylene terephthalate) and poly(methyl methacrylate) blends

The nonisothermal crystallization kinetics of poly(ethylene terephthalate) (PET) and poly(methyl methacrylate) (PMMA) blends were studied. Four compositions of the blends [PET 25/PMMA 75, PET 50/PMMA 50, PET 75/PMMA 25, and PET 90/PMMA 10 (w/w)] were melt‐blended for 1 h in a batch reactor at 275°C. Crystallization peaks of virgin PET and the four blends were obtained at cooling rates of 1°C, 2.5°C, 5°C, 10°C, 20°C, and 30°C/min, using a differential scanning calorimeter (DSC). A modified Avrami equation was used to analyze the nonisothermal data obtained. The Avrami parameters n, which denotes the nature of the crystal growth, and Z_t, which represents the rate of crystallization, were evaluated for the four blends. The crystallization half‐life (t_½) and maximum crystallization (t_max) times also were evaluated. The four blends and virgin polymers were characterized using a thermogravimetric analyzer (TGA), a wide‐angle X‐ray diffraction unit (WAXD), and a scanning electron microscope (SEM). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3565–3571, 2006     

Nonisothermal crystallization behavior of a luminescent conjugated polymer,poly(9,9‐dihexylfluorene‐alt‐2,5‐didodecyloxybenzene)

The nonisothermal crystallization kinetics of poly(9,9‐dihexylfluorene‐alt‐2,5‐didodecyloxybenzene) (PF6OC12) from the melt were investigated using differential scanning calorimetry under different cooling rates. Several analysis methods were used to describe the nonisothermal crystallization behavior of PF6OC12. It was found that the modified Avrami method by Jeziorny was only valid for describing the early stage of crystallization but was not able to describe the later stage of PF6OC12 crystallization. Also, the Ozawa method failed to describe the nonisothermal crystallization behavior of PF6OC12. However, the method developed by combining the Avrami and Ozawa equations could successfully describe the nonisothermal crystallization kinetics of PF6OC12. According to the Kissinger method, the activation energy was determined to be 114.9 kJ mol^?1 for the nonisothermal melt crystallization of PF6OC12. Copyright © 2006 Society of Chemical Industry     

Isothermal and nonisothermal crystallization kinetics of poly(ϵ‐caprolactone)

With increasing environmental awareness, evaluating the potential of biopolymers as a substitute for traditional materials has been of great interest. Crystallization kinetics provides fundamental knowledge required for evaluation, playing vital role in determining the final properties of the product. In this study, the isothermal and nonisothermal crystallization kinetics of poly(?‐caprolactone) (PCL) were investigated with the help of various models. The Avrami model best described the isothermal crystallization kinetics, suggesting three‐dimensional spherulitic growth, which was in agreement with the morphology studies; whereas the Liu model fit well under nonisothermal crystallization conditions. The failure of the Kissinger model to determine the activation energy was overcome with the Friedman model. The kinetic crystallizability determined by the Ziabacki model indicated a higher crystallization ability of PCL at lower cooling rates. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Poly(ϵ-caprolactone)/poly(ethylene oxide) diblock copolymer II. Nonisothermal crystallization and melting behavior

The nonisothermal crystallization behavior and melting process of the poly(ϵ-caprolactone) (PCL)/poly(ethylene oxide) (PEO) diblock copolymer in which the weight fraction of the PCL block is 0.80 has been studied by using differential scanning calorimetry (DSC). Only the PCL block is crystallizable, the PEO block with 0.20 weight fraction cannot crystallize. The kinetics of the PCL/PEO diblock copolymer under nonisothermal crystallization conditions has been analyzed by Ozawa's equation. The experimental data shows no agreement with Ozawa's theoretical predictions in the whole crystallization process, especially in the later stage. A parameter, kinetic crystallinity, is used to characterize the crystallizability of the PCL/PEO diblock copolymer. The amorphous and microphase separating PEO block has a great influence on the crystallization of the PCL block. It bonds chemically with the PCL block, reduces crystallization entropy, and provides nucleating sites for the PCL block crystallization. The existence of the PEO block leads to the occurrence of the two melting peaks of the PCL/PEO diblock copolymer during melting process after nonisothermal crystallization. The comparison of nonisothermal crystallization of the PCL/PEO diblock copolymer, PCL/PEO blend, and PCL and PEO homopolymers has been made. It showed a lower crystallinity of the PCL/PEO diblock copolymer than that of others and a faster crystallization rate of the PCL/PEO diblock copolymer than that of the PCL homopolymer, but a slower crystallization rate than that of the PCL/PEO blend. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 63: 1793–1804, 1997     

Isothermal crystallization kinetics of silk fibroin fiber‐reinforced poly(ε‐caprolactone) biocomposites

BACKGROUND: Poly(ε‐caprolactone) (PCL) has attracted great attention due to its wide applications for pharmaceutical controlled released systems and implanted polymer devices. In this study, silk fibroin fiber (SF) obtained from degumming treatment of silk was used to prepare novel reinforced PCL biocomposites. The isothermal crystallization behavior of these composites was investigated using differential scanning calorimetry measurements. RESULTS: With a decrease of isothermal crystallization temperature (T_c) and an increase of fiber filler, the crystallization time of the SF/PCL composites becomes shorter, the crystallization rate constant (K) increases and the Avrami exponent (n) gradually decreases (being between 1 and 2). The crystallization of PCL and SF/PCL composites occurs in the same regime. With the gradual addition of fiber, lateral surface free energy (σ) is nearly unchanged, but fold surface free energy (σ_e) decreases. CONCLUSION: Heterogeneous nucleation is dominant and different growth morphologies coexist during the isothermal crystallization process of the SF/PCL hybrid systems. Although the introduction of SF obviously increases the overall crystallization rate of PCL, the growth rate constant and nucleation constant of PCL are reduced because of the confinement effect of fiber network structures on the molecular mobility of polymer molecular chains. Copyright © 2009 Society of Chemical Industry     

Miscibility and crystallization behavior of biodegradable poly(ε‐caprolactone)/tannic acid blends

Miscibility, isothermal melt crystallization kinetics, spherulitic morphology and growth rates, and crystal structure of completely biodegradable poly(ε‐caprolactone) (PCL)/tannic acid (TA) blends were studied by differential scanning calorimetry, polarized optical microscopy, and wide angle X‐ray diffraction in detail in this work. PCL and TA are miscible as evidenced by the single composition dependent glass transition temperature over the whole compositions range and the depression of equilibrium melting point of PCL in the PCL/TA blends. Isothermal melt crystallization kinetics of neat PCL and an 80/20 PCL/TA blend was investigated and analyzed by the Avrami equation. The overall crystallization rates of PCL decrease with increasing crystallization temperature for both neat PCL and the PCL/TA blend; moreover, the overall crystallization rate of PCL is slower in the PCL/TA blend than in neat PCL at a given crystallization temperature. However, the crystallization mechanism of PCL does not change despite crystallization temperature and the addition of TA. The spherulitic growth rates of PCL also decrease with increasing crystallization temperature for both neat PCL and the PCL/TA blend; moreover, blending with TA reduces the spherulitic growth rate of PCL in the PCL/TA blend. It is also found that the crystal structure of PCL is not modified in the PCL/TA blend. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Nonisothermal crystallization behaviors of silk‐fibroin‐fiber‐reinforced poly(ϵ‐caprolactone) biocomposites

With differential scanning calorimetry measurements, the nonisothermal crystallization of biocomposites of poly(?‐caprolactone) (PCL) reinforced with silk fibroin fiber (SF) was investigated. With the gradual addition of SF, the strengthening of the heterogeneous nucleation reagent effect of SF led to the acceleration of PCL crystallization, and secondary crystallization occurred and became more remarkable with increases in the cooling rate and SF content. Moreover, with the introduction of SF and an increase in the cooling rate, the nucleation and growth mode of the PCL crystalline phase was slightly changed. Because of the confinement of the fiber network structure, the crystallite size of PCL was reduced, the crystallization exothermicity of PCL decreased, and the crystallization activation energy of PCL increased. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Enhanced crystallization rate and mechanical properties of poly(l‐lactic acid) by stereocomplexation with four‐armed poly(ϵ‐caprolactone)‐block‐poly(d‐lactic acid) diblock copolymer

Poly(l ‐lactic acid) (PLLA) was blended with a series of four‐armed poly(? ‐caprolactone)‐block ‐poly(d ‐lactic acid) (4a‐PCL‐b ‐PDLA) copolymers in order to improve its crystallization rate and mechanical properties. It is found that a higher content of 4a‐PCL‐b ‐PDLA copolymer or longer PDLA block in the copolymer lead to faster crystallization of the blend, which is attributed to the formation of stereocomplex crystallites between PLLA matrix and PDLA blocks of the 4a‐PCL‐b ‐PDLA copolymers. Meanwhile, the PDLA block can improve the miscibility between flexible PCL phase and PLLA phase, which is beneficial for improving mechanical properties. The tensile results indicate that the 10% 4a‐PCL_5k‐b ‐PDLA_5k/PLLA blend has the largest elongation at break of about 72% because of the synergistic effects of stereocomplexation between enantiomeric PLAs, multi‐arm structure and plasticization of PCL blocks. It is concluded that well‐controlled composition and content of 4a‐PCL‐b ‐PDLA copolymer in PLLA blends can significantly improve the crystallization rate and mechanical properties of the PLLA matrix. © 2017 Society of Chemical Industry     

Effect of nucleation agents on the crystallization of poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) (P3/4HB)

Boron nitride (BN), talc, hydroxyapatite (HA), and zinc stearate (ZnSt) were investigated as nucleation agents (NA) for nonfossil‐based poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) (P3/4HB) plastics. Nonisothermal crystallization behaviors of the P3/4HB/NA blends were examined by DSC. It revealed that BN is the most efficient nucleation agent to promote the crystallization rate, however, but not the crystallization degree. The lasting crystallization of P3/4HB was also removed. The nucleation effect was strengthened with increase of BN content up to 1% and then slackened deeply when further BN was added. Isothermal crystallization analysis revealed that the addition of nucleation agent BN does not alter the crystal growth mode of P3/4HB, with maintaining the Avrami parameter n value around 2.40. Talc did enhance the crystallization of P3/4HB with however milder crystal growth rate. HA and ZnSt did not promote, but depressed the crystallization of P3/4HB plastics. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and characterization of poly(ε‐caprolactone)‐b‐poly(ethylene glycol)‐b‐poly(ε‐caprolactone) triblock copolymers with dibutylmagnesium as catalyst

Two series of poly(ε‐caprolactone)‐b‐poly(ethylene glycol)‐b‐poly(ε‐caprolactone) triblock copolymers were prepared by the ring opening polymerization of ε‐caprolactone in the presence of poly(ethylene glycol) and dibutylmagnesium in 1,4‐dioxane solution at 70°C. The triblock structure and molecular weight of the copolymers were analyzed and confirmed by ¹H NMR, ¹³C NMR, FTIR, and gel permeation chromatography. The crystallization and thermal properties of the copolymers were investigated by wide‐angle X‐ray diffraction (WAXD) and differential scanning calorimetry (DSC). The results illustrated that the crystallization and melting behaviors of the copolymers were depended on the copolymer composition and the relative length of each block in copolymers. Crystallization exothermal peaks (T_c) and melting endothermic peaks (T_m) of PEG block were significantly influenced by the relative length of PCL blocks, due to the hindrance of the lateral PCL blocks. With increasing of the length of PCL blocks, the diffraction and the melting peak of PEG block disappeared gradually in the WAXD patterns and DSC curves, respectively. In contrast, the crystallization of PCL blocks was not suppressed by the middle PEG block. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Confined crystallization morphology of poly(ϵ‐caprolactone) block within poly(ϵ‐caprolactone)–poly(l‐lactide) copolymers

The confined crystallization of poly(?‐caprolactone) (PCL) block in poly(?‐caprolactone)–poly(l ‐lactide) (PCL‐PLLA) copolymers was investigated using differential scanning calorimetry, polarized optical microscopy, scanning electronic microscopy and atomic force microscopy. To study the effect of crystallization and molecular chain motion state of PLLA blocks in PCL‐PLLA copolymers on PCL crystallization morphology, high‐temperature annealing (180 °C) and low‐temperature annealing (80 °C) were applied to treat the samples. It was found that the crystallization morphology of PCL block in PCL‐PLLA copolymers is not only related to the ratio of block components, but also related to the thermal history. After annealing PCL‐PLLA copolymers at 180 °C, the molten PCL blocks are rejected from the front of PLLA crystal growth into the amorphous regions, which will lead to PCL and PLLA blocks exhibiting obvious fractionated crystallization and forming various morphologies depending on the length of PLLA segment. On the contrary, PCL blocks more easily form banded spherulites after PCL‐PLLA copolymers are annealed at 80 °C because the preexisting PLLA crystal template and the dangling amorphous PLLA chains on PCL segments more easily cause unequal stresses at opposite fold surfaces of PCL lamellae during the growth process. Also, it was found that the growth rate of banded spherulites is less than that of classical spherulites and the growth rate of banded spherulites decreases with decreasing band spacing. © 2019 Society of Chemical Industry     

Polymorphism and crystallization in poly(vinylidene fluoride)/ poly(ϵ‐caprolactone)–block–poly(dimethylsiloxane)–block–poly(ϵ‐caprolactone) blends

The miscibility, crystallization kinetics and crystalline morphology of a new system of poly(vinylidene fluoride)/poly(?‐caprolactone)‐block‐poly(dimethylsiloxane)‐block‐poly(?‐caprolactone) (PVDF/PCL‐b‐PDMS‐b‐PCL) triblock copolymer were investigated by a variety of techniques. The miscibility and phase behaviour of PVDF/PCL‐b‐PDMS‐b‐PCL were studied by determination of the melting point temperature, crystallization kinetics and Fourier transform infrared (FTIR) mapping. Chemical imaging was used as a new technique to characterize the interaction of polymer blends in crystalline morphology. The results demonstrate the existence of characteristic peaks of both PVDF and PCL in the chosen crystalline area. The crystalline structures of PVDF were affected by the PCL‐b‐PDMS‐b‐PCL triblock copolymer and facilitate the formation of the β polymorph which was illustrated by FTIR analysis. The β crystal phase fraction increases significantly on increasing the composition of the PCL‐b‐PDMS‐b‐PCL triblock copolymer. In addition, confined crystallization of PCL within PVDF inter‐lamellar and/or inter‐fibrillar regions was confirmed through polarizing optical microscopy, wide‐angle X‐ray diffraction and small‐angle X‐ray scattering analysis. © 2019 Society of Chemical Industry     

Non‐isothermal crystallization kinetics of poly(ε‐caprolactone) in hydrogen‐bond‐coupled polymeric‐inorganic hybrid materials

Some hydrogen‐bonding‐interactions‐mediated poly(ε‐caprolactone) (PCL)/silica (SiO₂) polymeric‐inorganic hybrids were prepared by the sol–gel process. The non‐isothermal crystallization kinetics of PCL in the hybrids was investigated by means of differential scanning calorimetry. The results show that the Jeziorny method, together with the combination of the Avrami and Ozawa equations, is applicable to describe the non‐isothermal crystallization kinetics of the PCL in the hybrid system, while the Ozawa theoretical method can be used just for the pure PCL and the 70/30 TEOS/PCL hybrids. Depending on the composition of the PCL/silica, the hybrids displayed microphase separation at various scales, which in turn affect the crystallization behavior and mechanism of PCL in the hybrids. On the one hand, the inorganic component (viz SiO₂) could act as the nucleating agent to facilitate the crystallization of PCL in the hybrids. On the other hand, the SiO₂ networks also confine the crystallization of PCL. Copyright © 2004 Society of Chemical Industry     

Kenaf fiber/poly(ε‐caprolactone) biocomposite with enhanced crystallization rate and mechanical properties

Plant‐derived kenaf fiber (KF)‐reinforced poly(ε‐caprolactone) (PCL) biocomposites were successfully fabricated by the melt mixing technique. The crystallization behavior, morphology, and mechanical and dynamic mechanical properties of PCL/KF composites with various KF weight contents were investigated. The crystallization rate, tensile and storage moduli significantly improved as compared to the virgin polymer. The half times of PCL/KF composite (20 wt % fiber content) in isothermal crystallization at 40°C and 45°C reduced to 31.6% and 42.0% of the neat PCL, respectively. Moreover, the tensile and storage modulus of the composite are improved by 146% and 223%, respectively, by the reinforcement with 30% KF. The morphology evaluated by SEM indicates good dispersion and adhesion between KF and PCL. Overall, these findings reveal that KF can be a potential reinforcement for the biodegradable polymer composites owing to its good ability to improve the mechanical properties as well as crystallization rate. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008