Electroreduction of hexavalent chromium by polyaniline

BACKGROUND: A plate‐gap model interpretation of enzymatic reaction kinetics and rotating disc voltammetry were applied for evaluation of the nature of the reaction of the electroreduction of Cr(VI) (as dichromate ions) on a polyaniline (PANI)‐modified glassy carbon (GC) electrode. RESULTS: The kinetic parameters (the maximal current (V_max) and Michaelis constant (K_M)) for electroreduction of Cr(VI) on the PANI‐modified GC electrode were determined as V_max = 0.34 × 10^?7 mol cm^?3 s^?1 and K_M = 0.47 × 10^?6 mol cm^?3. The reduction of dichromate is intensified by PANI film growth. CONCLUSION: To characterise the electroreduction of Cr(VI) on a PANI‐modified GC electrode, the kinetic parameters of the reaction were determined using a plate–gap model interpretation of enzymatic reaction kinetics and rotating disc voltammetry. The catalytic nature of Cr(VI) electroreduction on the PANI‐modified electrode has been shown. Copyright © 2009 Society of Chemical Industry     

Hydrogen peroxide sensor based on riboflavin immobilized at the nickel oxide nanoparticle-modified glassy carbon electrode

A simple and sensitive electrochemical sensor based on nickel oxide nanoparticles/riboflavin-modified glassy carbon (NiONPs/RF/GC) electrode was constructed and utilized to determine H₂O₂. By immersing the NiONPs/GC-modified electrode into riboflavin (RF) solution for a short period of time (5–300 s), a thin film of the proposed molecule was immobilized onto the electrode surface. The modified electrode showed stable and a well-defined redox couples at a wide pH range (2–10), with surface-confined characteristics. Experimental results revealed that RF was adsorbed on the surface of NiONPs, and in comparison with usual methods for the immobilization of RF, such as electropolymerization, the electrochemical reversibility and stability of this modified electrode has been improved. The surface coverage and heterogeneous electron transfer rate constants (k _s) of RF immobilized on a NiO _x –GC electrode were approximately 4.83 × 10^?11 mol cm^?2, 54 s^?1, respectively. The sensor exhibits a powerful electrocatalytic activity for the reduction of H₂O₂. The detection limit, sensitivity and catalytic rate constant (k _cat) of the modified electrode toward H₂O₂ were 85 nM, 24 nA μM^?1 and 7.3 (±0.2) × 10³ M^?1 s^?1, respectively, at linear concentration rang up to 3.0 mM. The reproducibility of the sensor was investigated in 10 μM H₂O₂ by amperometry, the value obtained being 2.5 % (n = 10). Furthermore, the fabricated H₂O₂ chemical sensor exhibited an excellent stability, remarkable catalytic activity and reproducibility.     

Simultaneous determination of dihydroxybenzene isomers based on thionine functionalized multiwall carbon nanotubes modified electrode

In this article, simultaneous determination of dihydroxybenzene isomers [hydroquinone (HQ), catechol (CC), and resorcinol (RC)] was investigated using cyclic voltammetry (CV) and differential pulse voltammetry (DPV) at thionine functionalized multiwalled carbon nanotube (TH-MWCNTs) modified glass carbon electrode. CV and DPV results showed that the TH-MWCNTs modified electrode exhibited excellent recognition ability toward the three isomers of dihydroxybenzene. Their oxidize peak currents were linear over ranges from 9.0 × 10^?7 to 3.6 × 10^?4 M for HQ, from 3.3 × 10^?6 to 8.1 × 10^?4 M for CC and from 4.3 × 10^?6 to 9.0 × 10^?4 M for RC, with the detection limits of 2.7 × 10^?7, 1.0 × 10^?6, and 1.1 × 10^?6 M, respectively. The proposed method would potentially be applied to multi-component analysis in environmental control and chemical industry.     

Effective electrochemically controlled process for perchlorate removal using poly(aniline‐co‐o‐aminophenol)/multiwalled carbon nanotubes

The study on perchlorate removal from simulated wastewater was carried out using a conducting copolymer poly(aniline‐co‐o‐aminophenol) (PANOA) polymerized on multiwalled carbon nanotubes (MWNTs)‐modified glassy carbon (GC) electrode. The cyclic voltammograms demonstrated that the PANOA/MWNTs GC electrode in a NaCl solution containing NaClO₄ had a good redox activity, reversibility, and stability in a wide range of pHs tested (from pH <1 to 9.0). The ratio of ClO/Cl^? in PANOA/MWNTs was up to 80.8%, which was 10.0% in the solution, indicating that PANOA/MWNTs had a relatively high affinity to perchlorate. The result of X‐ray photoelectron spectroscopy revealed a fact that Cl^? ions can be strongly adsorbed on MWNTs, which resulted in an improvement in the electrical activity of PANOA and perchlorate removal. Therefore, it is possible to develop a green process for removing perchlorate from wastewater using PANOA/MWNTs. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Modified glassy carbon electrode with Nafion/MWNTs as a sensitive voltammetric sensor for the determination of paeonol in pharmaceutical and biological samples

A simple, highly sensitive method was reported for directly voltammetric determination of paeonol in drug samples and human biological samples. Nafion/multi-wall carbon nanotubes’ (MWNTs) composite film was coated on the glassy carbon electrode. The adsorptive voltammetric behavior of paeonol on the Nafion/MWNTs-modified electrode was investigated using cyclic voltammetry (CV) and differential pulse anodic stripping voltammetry (DPASV). The results indicated that the Nafion/MWNTs-modified electrode could remarkably enhance electrocatalytic activity toward the oxidation of paeonol, and showed an excellent resistance capability toward the electrode passivation. A highly sensitive voltammetric sensor was developed for the detection of paeonol in pharmaceutical and biological samples. Under the optimum conditions, the anodic peak current was proportional to paeonol concentration in the range of 6.0 × 10⁻⁷–6.0 × 10⁻⁵ M with a detection limit of 4.0 × 10⁻⁷ M. Some kinetic parameters were determined, and multi-step mechanism for oxidation of paeonol was proposed.     

A novel non-enzymatic hydrogen peroxide sensor based on single walled carbon nanotubes–manganese complex modified glassy carbon electrode

A simple procedure was developed to prepare a glassy carbon (GC) electrode modified with single wall carbon nanotubes (SWCNTs) and phenazine derivative of Mn-complex. With immersing the GC/CNTs modified electrode into Mn-complex solution for a short period of time 20–100 s, a stable thin layer of the complex was immobilized onto electrode surface. Modified electrode showed a well defined redox couples at wide pH range (1–12). The surface coverages and heterogeneous electron transfer rate constants (k_s) of immobilized Mn-complex were approximately 1.58 × 10⁻¹⁰ mole cm⁻² and 48.84 s⁻¹. The modified electrode showed excellent electrocatalytic activity toward H₂O₂ reduction. Detection limit, sensitivity, linear concentration range and k_cat for H₂O₂ were, 0.2 μM and 692 nA μM⁻¹ cm⁻², 1 μM to 1.5 mM and 7.96(±0.2) × 10³ M⁻¹ s⁻¹, respectively. Compared to other modified electrodes, this electrode has many advantageous such as remarkable catalytic activity, good reproducibility, simple preparation procedure and long term stability.     

Determination of hydroquinone using poly(3‐methylthiophene) synthesized electrochemically on pt electrode in methylene chloride

Poly(3‐methylthiophene) (P3MT) film was synthesized by potentiodynamic method on Pt electrode in methylene chloride solution containing 0.10M tetrabuthlammonium perchlorate supporting electrolyte and used for the determination of hydroquinone (HQ) with amperometric I–t method in solution consisting of NaHSO₄/Na₂SO₄ (SBS; pH 2.0). This modified electrode has a lower working potential and good operational stability due to reducing electrode fouling when compared with the direct oxidation of HQ at the bare Pt electrode. Limit of detection, limit of quantification, and the linear response range were found to be 1.32 × 10^?5 mM, 4.41 × 10^?5 mM, and between 4.41 × 10^?5 – 50.0 mM (R² = 0.997), at 0.50 V versus saturated calomel electrode, respectively. HQ determination in complex matrix was checked using real samples to demonstrate the applicability of modified electrode. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40859.     

Preparation of poly(9‐aminoacridine)‐modified electrode and its application in the determination of dopamine and ascorbic acid simultaneously

A novel modified electrode was fabricated with 9‐aminoacridine by electropolymerization in the phosphate buffer solution (PBS) (pH 7.4) and was characterized by cyclic voltammetry (CV). The modified electrode showed excellent electrocatalytic effect and high stability toward the electrochemical oxidation of dopamine (DA) and ascorbic acid (AA). Also, it showed a high stability for the determination of DA and AA simultaneously. Well‐separated voltammetric peaks were observed for DA and AA on the modified electrode. The separation of two anodic peaks was 170 mV, which was large enough to eliminate the interference of AA and determine DA. The differential pulse voltammograms (DPV) were used for the measurement of DA by means of the poly(9‐aminoacridine)‐modified electrode in PBS at pH 7.4. A linear response toDA was observed in the concentration range from 1.5 × 10^?6 to 3.5 × 10^?3 mol L^?1 with a correlation coefficient of 0.9998 and a detection limit (S/N = 3) of 1.0 × 10^?7mol L^?1. The proposed method was used to determine DA in DA‐hydrochloride injection and showed excellent sensitivity and recovery. The ease of fabrication, good reproducibility, high stability, and low cost of the modified electrode are the promising features of the proposed sensor. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 3864–3870, 2007     

Amperometric detection of hydrogen peroxide at nano-nickel oxide/thionine and celestine blue nanocomposite-modified glassy carbon electrodes

A simple procedure was developed to prepare a glassy carbon (GC) electrode modified with nickel oxide (NiOx) nanoparticles and water-soluble dyes. By immersing the GC/NiOx modified electrode into thionine (TH) or celestine blue (CB) solutions for a short period of time (5–120 s), a thin film of the proposed molecules was immobilized onto the electrode surface. The modified electrodes showed stable and a well-defined redox couples at a wide pH range (2–12), with surface confined characteristics. In comparison to usual methods for the immobilization of dye molecules, such as electropolymerization or adsorption on the surface of preanodized electrodes, the electrochemical reversibility and stability of these modified electrodes have been improved. The surface coverage and heterogeneous electron transfer rate constants (k_s) of thionin and celestin blue immobilized on a NiOx-GC electrode were approximately 3.5 × 10⁻¹⁰ mol cm⁻², 6.12 s⁻¹, 5.9 × 10⁻¹⁰ mol cm⁻² and 6.58 s⁻¹, respectively. The results clearly show the high loading ability of the NiOx nanoparticles and great facilitation of the electron transfer between the immobilized TH, CB and NiOx nanoparticles. The modified electrodes show excellent electrocatalytic activity toward hydrogen peroxide reduction at a reduced overpotential. The catalytic rate constants for hydrogen peroxide reduction at GC/NiOx/CB and GC/NiOx/TH were 7.96 (±0.2) × 10³ M⁻¹ s⁻¹ and 5.5 (±0.2) × 10³ M⁻¹ s⁻¹, respectively. The detection limit, sensitivity and linear concentration range for hydrogen peroxide detection were 1.67 μM, 4.14 nA μM⁻¹ nA μM⁻¹ and 5 μM to 20 mM, and 0.36 μM, 7.62 nA μM⁻¹, and 1 μM to 10 mM for the GC/NiOx/TH and GC/NiOx/CB modified electrodes, respectively. Compared to other modified electrodes, these modified electrodes have many advantages, such as remarkable catalytic activity, good reproducibility, simple preparation procedures and long-term stabilities of signal responses during hydrogen peroxide reduction.     

Electrocatalysis and detection of nitrite on a polyaniline‐Cu nanocomposite‐modified glassy carbon electrode

A polyaniline (PANI)‐Cu nanocomposite‐modified electrode was fabricated by the electrochemical polymerization of aniline and the electrodeposition of copper under constant potentials on a glassy carbon electrode (GCE), respectively. Scanning electron microscope result shows that the PANI‐Cu composite on the surface of the GCE displays the nanofibers having an average diameter of about 80 nm with lengths varying from 1.1 to 1.2 μm. The electrode exhibits enhanced electrocatalytic behavior to the reduction of nitrite compared to the PANI‐modified GCE. The effects of applied potential, pH value of the detection solution, electropolymerization charge, temperature, and nitrite concentration on the current response of the composite‐modified GCE were investigated and discussed. Under optimal conditions, the PANI‐Cu composite‐modified GCE can be used to determine nitrite concentration in a wide linear range (n = 18) of 0.049 and 70.0 μM and a limit of detection of 0.025 μM. The sensitivity of the electrode was 0.312 μA μM^?1 cm^?2. The PANI‐Cu composite‐modified GCE had the good storage stability. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Self-assembly electrode based on silver nanoparticle toward electrogenerated chemiluminescence analysis of glucose

Electrogenerated Chemiluminescence (ECL) involves applying a certain electric potential to a chemical reaction, resulting in the oxidation or reduction of the substance which reacts to produce light. We determined the amount of glucose by its reaction to glucose oxidase (GO _X ) on the surface of the proposed modified electrode, which results hydrogen peroxide (H₂O₂) as side product. After that the reactions between luminol and H₂O₂ under oxidizing conditions generate dependent light which can be used to analyze. In the current article at first we proposed a convenient method to obtaining a self-assembly modified electrode. A nano based modified glassy carbon (GC) electrode (Glucose oxidase/Ag nanoparticles/cysteamine (CA)/p-aminobenzene sulfonic acid/GC electrode) was prepared, and the ECL behavior of luminol in the presence of glucose was examined. Compared to the bare GC electrode, the modified electrode incorporating glucose oxidase significantly enhanced the response of the ECL biosensor to glucose due to the enhanced specificity of the modified surface to enzymatic reaction, and the sensitivity of the luminol ECL reaction. Under optimal conditions, the electrode was established to respond linearly to glucose in the concentration range 5.0×10^?7 to 8.0×10^?3 mol/L, and the detection limit was established to be a glucose concentration of 4.0×10^?8 mol/L.     

Highly sensitive and simultaneous determination of hydroquinone and catechol at poly(thionine) modified glassy carbon electrode

A simple and highly sensitive electrochemical method for the simultaneous and quantitative detection of hydroquinone (HQ) and catechol (CT) was developed, based on a poly(thionine)-modified glassy carbon electrode (GCE). The modified electrode showed excellent electrocatalytic activity and reversibility towards the oxidation of both HQ and CT in 0.1 M phosphate buffer solution (PBS, pH 7.0). The peak-to-peak separations (ΔE_p) between oxidation and reduction waves in CV were decreased significantly from 262 and 204 mV at the bare GCE, to 63 and 56 mV, respectively for HQ and CT at the poly(thionine) modified GCE. Furthermore, the redox responses from the mixture of HQ and CT were easily resolved in both CV and DPV due to a difference in the catalytic activity of the modified GCE to each component. The peak potential separation of ca. 0.1 V was large enough for the simultaneous determination of HQ and CT electrochemically. The oxidation peak currents of HQ and CT were linear over the range from 1 to 120 μM in the presence of 100 and 200 μM of HQ and CT, respectively. The modified electrode showed very high sensitivity of 1.8 and 1.2 μA μM⁻¹ cm⁻² for HQ and CT, respectively. The detection limits (S/N = 3) for HQ and CT were 30 and 25 nM, respectively. The developed sensor was successfully examined for real sample analysis with tap water and revealed stable and reliable recovery data.     

Polymethylthiophene/Nafion-modified glassy carbon electrode for selective detection of dopamine in the presence of ascorbic acid

The possible use of an electrode modified with electroactive conductive poly(3-methylthiophene) (PMeT)/Nafion as a chemical sensor was investigated for the voltammetric analysis of Dopamine (DA). The electrochemical behavior of dopamine was examined by cyclic voltammetry (CV) and differential pulse voltammetry (DPV) techniques. By using a PMeT-modified glassy carbon (GC/PMeT) electrode, DA and Ascorbic Acid (AA) signals could be separated but the AA at high concentrations still caused significant interference by overlapping the DA peak. In comparison to the GC/PMeT electrode, the glassy carbon (GC/Nafion/PMeT) electrode modified with hybrid film Nafion/PMeT was found to permit a superior separation by shifting the oxidation of AA peak toward the less positive potential. The DPV curves for a mixture of DA and AA at an GC/Nafion/PMeT electrode in a 0.1 M H₂SO₄ solution showed peaks of DA and AA, at 0.45 and 0.21 V, respectively, indicating that the difference in the oxidation potential was 240 mV. In the 0.1 M H₂SO₄ solution, the oxidation peak current on the differential pulse voltammograms for the GC/PMeT electrode increased linearly with the concentration of DA in the range 1 × 10⁻⁶ to 1 × 10⁻³ M, and the oxidation peak current on the differential pulse voltammograms for the GC/Nafion/PMeT electrode in the range 5 × 10⁻⁷ to 2 × 10⁻⁴ M. The DA detection sensitivity of the GC/Nafion/PMeT electrode (26.7 μA μM⁻¹ cm⁻²) was 22 times higher than that of the GC/PMeT electrode (1.21 μA μM⁻¹ cm⁻²).     

Poly(crystal violet)/graphene-modified electrode for the simultaneous determination of trace lead and cadmium ions in water samples

A novel poly(crystal violet)/graphene-modified glassy carbon electrode (PCV/Gr/GCE) was fabricated for the simultaneous determination of Pb²⁺ and Cd²⁺. The electrochemical behavior of both species at the PCV/Gr/GCE was investigated employing cyclic voltammetry. In acetate buffer, the modified electrode showed an excellent electrocatalytical effect on the oxidation of both species and was further used for their determination. Under optimized analytical conditions, the oxidation peak currents of Pb²⁺ and Cd²⁺ obtained by differential pulse voltammetry in pH 4.6 acetate buffer showed a linear relationship with their concentrations in the ranges of 2.00 × 10^?8–1.95 × 10^?5 mol L^?1 and 4.00 × 10^?8–5.58 × 10^?5 mol L^?1, respectively. The developed method has excellent sensitivity, selectivity, reproducibility and has been successfully applied to the determination of Pb²⁺ and Cd²⁺ in water samples.     

Sonochemically Prepared GdWNFs/CNFs Nanocomposite as an Electrode Material for the Electrochemical Detection of Antibiotic Drug in Water Bodies

The work demonstrates the development of an electrochemical sensor for quantification of Chloramphenicol (CA) using pencil graphite electrode (PGE) modified with Gadolinium tungstate nano flakes and carbon nano fibers composite (PGE/GWNfs/CNFs). The composite was further characterized and confirmed by X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy, transmission electron microscopy analysis. The prepared GWNfs/CNFs nano composite was fabricated by drop casting method to get PGE/GWNfs/CNFs working electrode. The modified electrode is then analyzed by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and differential pulse voltammetry (DPV) methods for its electrochemical and electrocatalytic property. The electrochemical investigation of developed sensor shows enhanced activity towards electro-oxidation of CA. The DPV studies revealed high efficacy characteristics such as sensitivity in the range 0.03984 µA µM^?1 cm^?2, selectivity, good linear range (5–50 μM), and low detection limit (0.4 μM). The study benchmarks the use of GWNfs/CNFs as an excellent transducer material in electrochemical sensing of CA in standard samples thus, it finds an efficient potential application in the analysis of CA in environment sample analysis.

     

Electrochemical properties and simultaneous determination of dihydroxybenzene isomers at ordered mesoporous carbon-modified electrode

The voltammetric behaviors of dihydroxybenzene isomers were studied at an ordered mesoporous carbon-modified glassy carbon (OMC/GC) electrode. Compared to the bare electrode, the electrocatalytic activity of the modified electrode toward dihydroxybenzenes is evidenced by the increase of the peak current and the decrease of the peak separation (ΔE _p) in 0.1 M pH 5.0 phosphate buffer solution (PBS). Furthermore, at the OMC/GC-modified electrode, the three isomers could be separated entirely. The oxidation peak potential difference between hydroquinone and catechol is 154 mV, whereas that difference between catechol, and resorcinol is 370 mV. In the amperometric detection, the peak currents of dihydroxybenzene increased linearly with increasing dihydroxybenzene contents. The detection limits were 7.6 × 10⁻⁸ M, 1.0 × 10⁻⁷ M, 9.0 × 10⁻⁸ M for hydroquinone, catechol and resorcinol, respectively, which are the lowest values ever reported for dihydroxybenzene isomers. These make OMC/GC electrode a promising candidate for the simultaneous determination of isomers.     

Electrochemical determination diethylstilbestrol by a single-walled carbon nanotube/platinum nanoparticle composite film electrode

Platinum nanoparticles (Pt_nano) were prepared and used in combination with single-wall carbon nanotube (SWNT) for fabricating electrochemical sensors with remarkably improved sensitivity toward diethylstilbestrol (DES). The glassy carbon (GC) electrode modified with SWNT/Pt_nano composite film exhibited excellent electrochemical behaviors toward the redox of DES. Compared with the bare GC electrode and SWNTs film modified GC electrode, the redox peak currents at the SWNTs/Pt_nano composite film modified GC electrode was enhanced greatly. The experimental parameters, which influence the peak current of DES, were optimized. Under optimal conditions, a linear response of DES was obtained in the range from 1.0 × 10⁻⁷ to 2.0 × 10⁻⁵ mol L⁻¹ (R = 0.997) and with a limit of detect (LOD) of 1.5 × 10⁻⁸ mol L⁻¹. The proposed procedure was successfully applied to determine the active ingredient in the DES tablet with satisfactory results.     

Amperometric biosensor for nitrite and hydrogen peroxide based on hemoglobin immobilized on gold nanoparticles/polythionine/platinum nanoparticles modified glassy carbon electrode

BACKGROUND: This paper describes a convenient and effective strategy to construct a highly sensitive amperometric biosensor for nitrite (NO₂^?) and hydrogen peroxide (H₂O₂). First, Pt nanoparticles (PtNPs) were electrodeposited on a glassy carbon electrode (GCE) surface, which promoted electron transfer and enhanced the loading of poly‐thionine (PTH). Subsequently, thionine (TH) was electropolymerized on the PtNPs/GCE, and gold nanoparticles (AuNPs) were assembled onto the PTH film to improve the absorption capacity of hemoglobin (Hb) and further facilitate electron transfer. Finally, Hb was immobilized onto the electrode through the AuNPs. RESULTS: Cyclic voltammetry (CV) and scanning electron microscopy (SEM) were used to characterize the fabrication process of the sensing surface. Under optimum conditions, the biosensors can be used for the determination of NO₂^? in the concentration range 70 nmol L^?1 to 1.2 mmo L^?1 and of H₂O₂ in the range 4.9 µmol L^?1 to 6.8 mmol L^?1. The detection limits (S/N = 3) were 20 nmol L^?1 and 1.4 µmol L^?1, respectively. CONCLUSION: The biosensor exhibits good analytical performance, acceptable stability and good selectivity. Copyright © 2011 Society of Chemical Industry     

Evolution of phase morphology and ‘network‐like’ structure of multiwall carbon nanotubes in binary polymer blends during melt‐mixing

Polyamide6 (PA6)/acrylonitrile butadiene styrene copolymer (ABS) blends with unmodified multiwall carbon nanotubes (MWNTs) were prepared via melt‐blending in a conical twin‐screw micro‐compounder with varying melt‐mixing time. To improve the state of dispersion of MWNTs, non‐covalent organic modifiers for MWNTs have been utilized: sodium salt of 6‐amino hexanoic acid (Na‐AHA) and 1‐pyrene‐carboxaldehyde (PyCHO). PA6/ABS blends with MWNTs have shown a phase morphology transition from ‘matrix‐dispersed droplet’ type to ‘co‐continuous’ type as a function of melt‐mixing time with the exception of 40/60 PA6/ABS blend with PyCHO‐modified MWNTs. Non‐isothermal crystallization studies revealed the heterogeneous nucleating action of MWNTs through the presence of double crystallization exothermic peaks (at ～192^°C and >200^°C) while pure PA6 shows bulk crystallization peak at ～192°C. 40/60 and 60/40 (wt/wt) PA6/ABS blends with 5 wt% unmodified MWNTs exhibited electrical conductivity values of ～3.9 × 10^?11 S/cm and ～4.36 × 10^?6 S/cm, respectively. A significant enhancement in electrical conductivity was observed with Na‐AHA and PyCHO‐modified MWNTs (order of ～10^?6 and ～10^?4 S/cm, respectively). POLYM. ENG. SCI., 55:429–442, 2015. © 2014 Society of Plastics Engineers     

Poly-phenothiazine derivative-modified glassy carbon electrode for NADH electrocatalytic oxidation

Electropolymerization of a new phenothiazine derivative (bis-phenothiazin-3-yl methane; BPhM) on glassy carbon (GC) electrode generates a conducting film of poly-BPhM, in stable contact with the electrode surface. The heterogeneous electron-transfer process corresponding to the modified electrode is characterized by a high rate constant (50.4 s⁻¹, pH 7). The GC/poly-BPhM electrode shows excellent electrocatalytic activity toward NADH oxidation. The rate constant for catalytic NADH oxidation, estimated from rotating disk electrode (RDE) measurements and extrapolated to zero concentration of NADH, was found to be 9.4 × 10⁴ M⁻¹ s⁻¹ (pH 7). The amperometric detection of NADH, at +200 mV vs. SCE, is described by the following electroanalytical parameters: a sensitivity of 1.82 mA M⁻¹, a detection limit of 2 μM and a linear domain up to 0.1 mM NADH.