Synthesis of branched polyethylene by ethylene homopolymerization with a novel (α‐diimine)nickel complex in the presence of methylaluminoxane

Branched polyethylene (PE) was prepared with a novel (α‐diimine)nickel(II) complex of 2,3‐bis(2,6‐dimethylphenyl)‐butanediimine nickel dichloride {[2,6‐(CH₃)₂C₆H₃? N?C(CH₃)C(CH₃)?N? 2,6‐(CH₃)₂C₆H₃]NiCl₂} activated by methylaluminoxane in the presence of a single ethylene monomer. The influences of various polymerization conditions, including the temperature, Al/Ni molar ratio, Ni catalyst concentration, and time, on the catalytic activity, molecular weight, degree of branching, and branch length of PE were investigated. According to gel permeation chromatography, the weight‐average molecular weights of the polymers obtained ranged from 1.7 × 10⁵ to 6.0 × 10⁵, with narrow molecular weight distributions of 2.0–3.5. The degree of branching in the polymers rapidly increased with the polymerization temperature increasing; this led to highly crystalline to totally amorphous polymers, but it was independent of the Al/Ni molar ratio and catalyst concentration. At polymerization temperatures greater than 20°C, the resultant PE was confirmed by ¹³C‐NMR to contain significant amounts of not only methyl but also ethyl, propyl, butyl, amyl, and long branches (longer than six carbons). The formation of the branches could be illustrated by the chain walking mechanism, which controlled their specific spacing and conformational arrangements with one another. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1123–1132, 2002; DOI 10.1002/app.10398     

Preparation of highly branched polyethylene using (α‐diimine) nickel complex covalently supported on modified SiO2

Bis(4‐(4‐amine‐3,5‐diisopropylbenzyl)‐2,6‐diisopropylphenylimino) acenaphthene NiBr₂ (Catalyst I) was synthesized. The complex covalently supported on Et₃Al‐treated silica (SC) and used for ethylene polymerization was produced with cocatalyst of common inexpensive alkylaluminum compounds. Polyethylenes (PEs) with branching numbers of 12.94 (1000C) to 116.02 (1000C) were prepared in heptane. The polymerization conditions, such as the cocatalyst, Al/Ni ratio, and temperature, had significant effects on catalytic activity and properties of polyethylenes. Confirmed by high‐temperature ¹³C NMR, the polyethylenes synthesized contain significant amounts of not only methyl but also ethyl, propyl, butyl, pentyl, and other long branches (longer than six carbons). The branching degree of polyethylenes increased with temperature, while their molecular weight and melting point decreased correspondingly, resulting in linear semicrystalline to totally amorphous polymers. The formation of the branches could be illustrated by the chain walking mechanism, which controlled their specific spacing and conformational arrangements with one another. © 2006 Wiley Periodicals, Inc. J Appl PolymSci 103: 1483–1489, 2007     

The influence of various reaction parameters on the performance of (α‐diimine)nickel(II) catalysts in ethylene oligomerization reactions

Modified (α‐diimine)nickel(II) catalysts are suitable for ethylene oligomerization reactions. Due to the mechanism (“chain running”), the formation of double‐bond isomers and branched olefins can be observed. The obtained oligomer mixtures show a Schulz–Flory distribution. Increasing ethylene pressure favors the selectivity of α‐olefin formation. The same effect can be observed when Lewis bases like thiophene or furane are added to the oligomerization reaction mixture. These results can be related to an interaction of the additives with the catalytic active species during the oligomerization process. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1356–1361, 2003     

Synthesis of acrylamide end‐functionalised poly(1‐hexene) using an α‐diimine nickel catalyst

The nickel precursor [bis(N,N′‐dimesitylimino)acenaphthene]dibromonickel and methylaluminoxane were used to catalyse the functionalisation of 1‐hexene with acrylamide by passivation of acrylamide with tri‐isobutylaluminium. The polymer obtained was characterised by GPC/SEC and NMR. The NMR experiments performed, COSY, DEPT, long‐range selective INEPT, HSQC and TOCSY 1D, showed that a 2,1 insertion of a single molecule of acrylamide per macromolecule had occurred at the end of the polyhexene chain. Copyright © 2004 Society of Chemical Industry     

Ruthenium(II)‐Catalyzed Protocol for Preparation of Diverse α,β‐ and β,β‐Dihaloenones from Diazodicarbonyls

Efficient one‐step syntheses of α,β‐ and β,β‐dihaloenones were achieved by ruthenium(II)‐catalyzed reactions between cyclic or acyclic diazodicarbonyl compounds and oxalyl chloride or oxalyl bromide in moderate to good yields. This methodology offers several significant advantages, which include ease of handling, mild reaction conditions, one‐step reaction, and the use of an effective and non‐toxic catalyst. The synthesized compounds were further transformed into highly functionalized novel molecules bearing aromatic rings on the enone moiety using the Suzuki reaction.

     

Cationic copolymers of α,β‐poly‐(N‐2‐hydroxyethyl)‐DL‐aspartamide (PHEA) and α,β‐polyasparthylhydrazide (PAHy): synthesis and characterization

In the present study the derivatization of two water‐soluble synthetic polymers, α,β‐poly(N‐2‐hydroxyethyl)‐DL ‐aspartamide (PHEA) and α,β‐polyasparthylhydrazide (PAHy), with glycidyltrimethylammonium chloride (GTA) is described. This reaction permits the introduction of positive charges in the macromolecular chains of PHEA and PAHy in order to make easier the electrostatic interaction with DNA. Different parameters affect the reaction of derivatization, such as GTA concentration and reaction time. PHEA reacts partially and slowly with GTA; on the contrary the reaction of PAHy with GTA is more rapid and extensive. The derivatization of PHEA and PAHy with GTA is a convenient method to introduce positive groups in their chains and it permits the preparation of interpolyelectrolyte complexes with DNA. © 2000 Society of Chemical Industry     

Multi‐Enzymatic Synthesis of Optically Pure β‐Hydroxy α‐Amino Acids

A novel enzymatic production system of optically pure β‐hydroxy α‐amino acids was developed. Two enzymes were used for the system: an N‐succinyl L ‐amino acid β‐hydroxylase (SadA) belonging to the iron(II)/α‐ketoglutarate‐dependent dioxygenase superfamily and an N‐succinyl L ‐amino acid desuccinylase (LasA). The genes encoding the two enzymes are part of a gene set responsible for the biosynthesis of peptidyl compounds found in the Burkholderia ambifaria AMMD genome. SadA stereoselectively hydroxylated several N‐succinyl aliphatic L ‐amino acids and produced N‐succinyl β‐hydroxy L ‐amino acids, such as N‐succinyl‐L ‐β‐hydroxyvaline, N‐succinyl‐L ‐threonine, (2S,3R)‐N‐succinyl‐L ‐β‐hydroxyisoleucine, and N‐succinyl‐L ‐threo‐β‐hydroxyleucine. LasA catalyzed the desuccinylation of various N‐succinyl‐L ‐amino acids. Surprisingly, LasA is the first amide bond‐forming enzyme belonging to the amidohydrolase superfamily, and has succinylation activity towards the amino group of L ‐leucine. By combining SadA and LasA in a preparative scale production using N‐succinyl‐L ‐leucine as substrate, 2.3 mmol of L ‐threo‐β‐hydroxyleucine were successfully produced with 93% conversion and over 99% of diastereomeric excess. Consequently, the new production system described in this study has advantages in optical purity and reaction efficiency for application in the mass production of several β‐hydroxy α‐amino acids.

     

Efficient Synthesis of β,γ‐Alkynyl α‐Amino Acid Derivatives by Ag(I)‐Catalyzed Alkynylation of α‐Imino Esters

The first catalytic synthesis of β,γ‐alkynyl α‐amino acid derivatives was achieved by direct addition of terminal alkynes to α‐imino esters in the presence of an Ag(I) salt under mild reaction conditions.     

Synthesis of polar vinyl monomer–olefin copolymers by α‐diimine nickel catalyst

Vinyl acetate, methyl methacrylate, acrylonitrile and methyl vinyl ketone were investigated for co‐ and terpolymerization with ethylene and ethylene–propylene. Precursor [bis(N,N ′‐dimesitylimino)acenaphthene]dibromonickel, activated by methylaluminoxane was used as a catalyst system and trialkylaluminium was employed to block the polar groups for these polymerizations. Polymerization activities of the order of magnitude of 10⁶ in the case of vinyl acetate and methyl methacrylate, and 10⁵ in the case of acrylonitrile were achieved. Microanalysis and GPC of acrylonitrile copolymers found about 17 units of acrylonitrile per polymer chain. Copolymers with very different properties from the parent homopolymers were obtained in all cases except that of methyl vinyl ketone. © 2001 Society of Chemical Industry     

Synthesis,characterization and (electro)chemical polymerization of triphenylamine‐end‐functionalized poly(ε‐caprolactone)

Triphenylamine‐based oligomers and polymers with linear, hyperbranched, star‐shaped or dendrimer architectures have been synthesized and studied due to their interesting electro‐optical properties. In many cases insoluble materials are obtained. In this study, we report the synthesis of grafted polytriphenylamine by chemical and electrochemical polymerization of triphenylamine‐end‐functionalized poly(ε‐caprolactone). Functionalized ε‐caprolactone oligomers were obtained by ring‐opening polymerization of ε‐caprolactone initiated by 4‐hydroxymethyltriphenylamine/stannous octanoate (tin 2‐ethylhexanoate). The ring‐opening polymerization of ε‐caprolactone using 4‐hydroxymethyltriphenylamine/stannous octanoate as initiating system provided ε‐caprolactone oligomers, with well‐defined molecular weights, containing a triphenylamine terminal group. Chemical and electrochemical coupling oxidation of the triphenylamine ends allowed the formulation of polyarylamines with ε‐caprolactone oligomers as grafts. Graft copolymers with an aryleneamine backbone and short poly(ε‐caprolactone) grafts were obtained by (electro)chemical oxidation of oligomers containing triphenylamine terminal groups. Copyright © 2009 Society of Chemical Industry     

Poly‐α,β‐(3‐hydroxypropyl)‐DL‐aspartamide: A new drug carrier

Poly‐α,β‐(3‐hydroxypropyl)‐DL ‐aspartamide (PHPA) was synthesized by the ring‐open reaction of polysuccinimide (PSI) and 3‐hydroxypropylamine. The polymer was characterized by ¹H‐NMR, ¹³C‐NMR, FTIR, and GPC. Mark–Houwink coefficients were obtained from viscometry and GPC measurements, K = 5.53 × 10⁻³ and α = 0.78 in water. The acute toxicity of PHPA was examined and it revealed no death in ICR mice up to the dose treated of 15.3 kg/kg, and hematological parameters showed no significant difference between treated and control animals. The potential use of PHPA as a drug carrier was also investigated. In a typical case, a contraceptive drug, norethindrone (NET), was bonded to PHPA, and the drug sustained released as long as 120 days an in vitro test. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 2411–2417, 2000     

Palladium(II)‐Catalyzed Hydration of Alkynylphosphonates to β‐Ketophosphonates

A highly efficient palladium(II)‐catalyzed hydration of a wide range of alkynylphosphonates to the corresponding β‐ketophosphonates has been developed to give high yields at 80 °C in 1, 4‐dioxane, with no acidic or alkaline cocatalysts required. The described catalytic system should provide an efficient alternative to highly toxic mercury‐catalyzed methodologies and be useful in synthetic programs.     

Organocatalytic Enantioselective Aziridination of α‐Substituted α,β‐Unsaturated Aldehydes: Asymmetric Synthesis of Terminal Aziridines

The first example of a highly enantioselective organocatalytic aziridination of α‐substituted α,β‐unsaturated aldehydes is presented. The reaction is catalyzed by simple chiral amines and gives access to highly functional terminal azirdines containing an α‐tertiary amine stereocenter in high yields and enantiomeric ratios (95.5:4.5–98:2).     

Highly Enantioselective Phase‐Transfer Catalytic α‐Alkylation of α‐tert‐Butoxycarbonyllactams: Construction of β‐Quaternary Chiral Pyrrolidine and Piperidine Systems

A new enantioselective α‐alkylation of α‐tert‐butoxycarbonyllactams for the construction of β‐quaternary chiral pyrrolidine and piperidine core systems is reported. α‐Alkylations of N‐methyl‐α‐tert‐butoxycarbonylbutyrolactam and N‐diphenylmethyl‐α‐tert‐butoxycarbonylvalerolactam under phase‐transfer catalytic conditions (solid potassium hydroxide, toluene, −40 °C) in the presence of (S,S)‐3,4,5‐trifluorophenyl‐3,3′,5,5′‐tetrahydro‐2,6‐bis(3,4,5‐trifluorophenyl)‐4,4′‐spirobi[4H‐dinaphth[2,1‐c:1′,2′‐e]azepinium] bromide [(S,S)‐NAS Br] (5 mol%) afforded the corresponding α‐alkyl‐α‐tert‐butoxycarbonyllactams in very high chemical (up to 99%) and optical yields (up to 98% ee). Our new catalytic systems provide attractive synthetic methods for pyrrolidine‐ and piperidine‐based alkaloids and chiral intermediates with β‐quaternary carbon centers.     

Infrared study on in situ polymerization of zinc dimethacrylate in poly(α‐octylene‐co‐ethylene) elastomer

An infrared spectroscopic method was used to follow the course of in situ polymerization of zinc dimethacrylate (ZDMA) in poly(α‐octylene‐co‐ethylene) elastomer (POE). The integral intensity of the 831 cm^?1 band, ie the out‐of‐plane deformation mode of ?CH, was used to determine the residual amount of ZDMA in composites cured at 165°C for different times, through which the course of in situ polymerization of ZDMA in POE was traced and the dynamic curve determined. The curing course of the ZDMA/POE/peroxide system at 165°C was examined with a rheometer and compared with the course of in situ polymerization. The results surprisingly show that the in situ polymerization of ZDMA is almost complete at the beginning stage of curing, and that substantial crosslinking starts subsequently. Scanning electron microscopy and transmission electron microscopy observations on morphologies of ZDMA/POE composites cured at 165°C for different times were carried out and confirmed the results of infrared experiments. Combining all the investigations, it was deduced that a competition exists between in situ polymerization and crosslinking in the composites. Covalent crosslinking rather than ionic bond crosslinks are the major types of crosslinks structures in ZDMA/POE composites, and its total density is lower than that of carbon‐ black‐reinforced POE. Copyright © 2004 Society of Chemical Industry     

Palladium(II)‐Catalyzed Aerobic Intermolecular Cyclization of Acrylic Acid with Alkenes to α‐Methylene‐γ‐butyrolactones

The methodology in this article is a palladium(II)/copper(II)‐ or palladium(II)‐catalyzed intermolecular cyclization of acrylic acid with alkenes to produce α‐methylene‐γ‐butyrolactone derivatives using molecular oxygen as an environmentally benign oxidant. In this system, the carboxylato, especially trifluoroacetato, or trimethylacetato ligand, plays a quite important role to afford a high catalytic activity by suppressing the deposition of palladium(0) black.     

Structural characterization of α‐ and β‐nucleated isotactic polypropylene

Modification of isotactic polypropylene (iPP) with two nucleation agents, namely 1,3:24‐bis(3,4‐dimethylobenzylideno) sorbitol (DMDBS) (α‐nucleator) and N, N′‐dicyclohexylo‐2,6‐naphthaleno dicarboxy amide (NJ) (β‐nucleator), leads to significant changes of the structure, morphology and properties. Both nucleating agents cause an increase in the crystallization temperature. The efficiency determined in a self‐nucleation test is 73.4 % for DMDBS and 55.9 % for NJ. The modification with NJ induces the creation of the hexagonal β‐form of iPP. The addition of DMDBS lowers the haze of iPP while the presence of NJ increases the haze. Copyright © 2004 Society of Chemical Industry     

Structural elucidation and iron oxidation states in situ formed β‐Ca3(PO4)2/α‐Fe2O3 composites

A detailed structural analysis on the in situ synthesized β‐Ca₃(PO₄)₂/α‐Fe₂O₃ composites is demonstrated. Compositional ratios, the influence and occupancy of iron at the β‐Ca₃(PO₄)₂ lattice, oxidation state of iron in the composites are derived from analytical techniques involving XRD, FT‐IR, Raman, refinement of the powder X‐ray diffraction and X‐ray photoelectron spectroscopy. Iron exists in the Fe³⁺ state throughout the investigated systems and favors its occupancy at the Ca²⁺(5) site of β‐Ca₃(PO₄)₂ until critical limit, and thereafter crystallizes as α‐Fe₂O₃ at ambient conditions. Fe³⁺ occupancy at the β‐Ca₃(PO₄)₂ lattice yields a Ca₉Fe(PO₄)₇ structure that is isostructural with its counterpart. A strong rise in the soft ferromagnetic behavior of β‐Ca₃(PO₄)₂/α‐Fe₂O₃ composites is obvious that depends on the content of α‐Fe₂O₃ in the composites. Overall, the diverse level of iron inclusions at the calcium phosphate system with a Ca/P ratio of 1.5 yields a structurally stable β‐Ca₃(PO₄)₂/α‐Fe₂O₃ composites with assorted compositional ratios.     

Synthesis and characterization of p‐perfluoro{1‐[2‐(2‐fluorosulfonyl‐ethoxy)propoxy]}ethylated poly(α‐methyl styrene)

p‐Perfluoro{1‐[2‐(2‐fluorosulfonyl‐ethoxy)propoxy]}ethylated poly(α‐ methyl styrene) 3 was synthesized via electron transfer of perfluoro‐di{2‐[2‐(2‐fluorosulfonyl‐ethoxy)propoxy]}propionyl peroxide 2 and poly(α‐methyl styrene) 1 at different reactant molar ratios (2 : 1). The modified polymer 3 was characterized by various techniques. The ring p‐substitution was proved by FTIR and ¹⁹FNMR. The desulfonation appeared at above 124°C was found by TGA. The molecular weight determined by GPC increased with the increase of reactant molar ratio, and the polydispersity values indicated there was no degradation of the parent polymer chain in the reaction. Followed by hydrolysis and acidification, the modified polymer 3 could be further quantitatively converted into its sulfonic form 4. Ion exchange capacity of novel polyelectrolyte 4 can be controlled by changing reactant molar ratio (2 : 1). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3615–3618, 2006     

Synthesis and characterization of polyrotaxanes comprising α‐cyclodextrins and poly(ε‐caprolactone) end‐capped with poly(butyl methacrylate)s

Biodegradable polyrotaxane‐based triblock copolymers were synthesized via the bulk atom transfer radical polymerization (ATRP) of n‐butyl methacrylate (BMA) initiated with polypseudo‐rotaxanes (PPRs) built from a distal 2‐bromoisobutyryl end‐capped poly(ε‐caprolactone) (Br‐PCL‐Br) with α‐cyclodextrins (α‐CDs) in the presence of Cu(I)Br/N,N,N′,N″,N″‐pentamethyldiethylenetriamine at 45 ºC. The structure was characterized in detail by means of ¹H NMR, gel permeation chromatography, wide‐angle X‐ray diffraction, DSC and TGA. When the feed molar ratio of BMA to Br‐PCL‐Br was changed from 128 to 300, the degree of polymerization of PBMA blocks attached to two ends of the PPRs was in the range 382 ? 803. Although about a tenth of the added α‐CDs were still threaded onto the PCL chain after the ATRP process, the movable α‐CDs made a marked contribution to the mechanical strength enhancement, blood anticoagulation activity and protein adsorption repellency of the resulting copolymers. Meanwhile, they could also protect the copolymers from the attack of H₂O and Lipase AK Amano molecules, exhibiting a lower mass loss as evidenced in hydrolytic and enzymatic degradation experiments. © 2013 Society of Chemical Industry