Effect of graft modification with poly(N‐vinylpyrrolidone) on thermal and mechanical properties of poly (3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)

Poly(N‐vinylpyrrolidone) (PVP) groups were grafted onto poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) backbone to modify the properties of PHBV and synthesize a new novel biocompatible graft copolymer. The effect of graft modification with PVP on the thermal and mechanical properties of PHBV was investigated. The thermal stability of grafted PHBV was remarkably improved while the melting temperature (T_m) was almost not affected by graft modification. The isothermal crystallization behavior of samples was observed by polarized optical microscopy and the results showed that the spherulitic radial growth rates (G) of grafted PHBV at the same crystallization temperature (T_c) decreased with increasing graft yield (graft%) of samples. Analysis of isothermal crystallization kinetics showed that both the surface free energy (σ_e) and the work of chain‐folding per molecular fold (q) of grafted PHBV increased with increasing graft%, implying that the chains of grafted PHBV are less flexible than ungrafted PHBV. This conclusion was in agreement with the mechanical testing results. The Young's modulus of grafted PHBV increased while the elongation decreased with increasing graft%. The hydrophilicity of polymer films was also investigated by the water contact angle measurement and the results revealed that the hydrophilicity of grafted PHBV was enhanced. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Effect of poly(propylene carbonate) on the crystallization and melting behavior of poly(β‐hydroxybutyrate‐co‐β‐hydroxyvalerate)

The crystallization and melting behavior of poly(β‐hydroxybutyrate‐co‐β‐hydroxyvalerate) (PHBV) and a 30/70 (w/w) PHBV/poly(propylene carbonate) (PPC) blend was investigated with differential scanning calorimetry (DSC) and Fourier transform infrared (FTIR). The transesterification reaction between PHBV and PPC was detected in the melt‐blending process. The interaction between the two macromolecules was confirmed by means of FTIR analysis. During the crystallization process from the melt, the crystallization temperature of the PHBV/PPC blend decreased about 8°C, the melting temperature was depressed by 4°C, and the degree of crystallinity of PHBV in the blend decreased about 9.4%; this was calculated through a comparison of the DSC heating traces for the blend and pure PHBV. These results indicated that imperfect crystals of PHBV formed, crystallization was inhibited, and the crystallization ability of PHBV was weakened in the blend. The equilibrium melting temperatures of PHBV and the 30/70 PHBV/PPC blend isothermally crystallized were 187.1 and 179°C, respectively. The isothermal crystallization kinetics were also studied. The fold surface free energy of the developing crystals of PHBV isothermally crystallized from the melt decreased; however, a depression in the relative degree of crystallization, a reduction of the linear growth rate of the spherulites, and decreases in the equilibrium melting temperature and crystallization capability of PHBV were detected with the addition of PPC. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2514–2521, 2004     

Preparation and characterization of novel polydimethylsiloxane composites used POSS as cross‐linker and fumed silica as reinforcing filler

A series of novel polydimethylsiloxane (PDMS) composites were prepared using octa[(trimethoxysilyl)ethyl]‐POSS (OPS) as cross‐linker and fumed silica as reinforcing filler. The cross‐linked networks, morphologies, thermal and mechanical properties of these novel PDMS composites were examined by attenuated total reflection infrared spectroscopy and the extraction/swelling experiment, scanning electron microscope, thermogravimetric analysis, and universal tensile testing machine, respectively. It was found that both the resistance to thermal degradation and mechanical properties of the novel PDMS composites were improved greatly by adding fumed silica. The prominent improvements in resistance to thermal degradation and mechanical properties of novel PDMS composites were likely attributed to the enhanced interaction of PDMS chains and aggregated particles resulted from synergistic effect between POSS and fumed silica. Meanwhile, we also found that the resistance to thermal degradation of the PDMS composites was lowered slightly with the further increment in loading fumed silica, but their mechanical properties were enhanced. The slight decrease in trend of the resistance to thermal degradation of the novel PDMS composites was likely ascribed to the increasing amount of hydroxyl groups resulting from fumed silica. And the improving mechanical properties were mainly attributed to the increasing interaction of PDMS chains and aggregated particles originated from synergistic effect between POSS and fumed silica. POLYM. COMPOS., 34:1041–1050, 2013. © 2013 Society of Plastics Engineers     

Crystallization and melting behavior of partially miscible six‐armed poly(l‐lactic acid)/poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) blends

The crystallization kinetics and spherulitic morphology of six‐armed poly(L‐lactic acid) (6a‐PLLA)/poly(3‐hydroxybutyrate‐co?3‐hydroxyvalerate) (PHBV) crystalline/crystalline partially miscible blends were investigated with differential scanning calorimetry and polarized optical microscopy in this study. Avrami analysis was used to describe the isothermal crystallization process of the neat polymers and their blends. The results suggest that blending had a complex influence on the crystallization rate of the two components during the isothermal crystallization process. Also, the crystallization mechanism of these blends was different from that of the neat polymers. The melting behavior of these blends was also studied after crystallization at various crystallization temperatures. The crystallization of PHBV at 125°C was difficult, so no melting peaks were found. However, it was interesting to find a weak melting peak, which arose from the PHBV component for the 20/80 6a‐PLLA/PHBV blend after crystallization at 125°C, and it is discussed in detail. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42548.     

The morphology and thermal properties of multi‐walled carbon nanotube and poly(hydroxybutyrate‐co‐hydroxyvalerate) composite

Nanocomposites based on poly(hydroxybutyrate‐co‐hydroxyvalerate) (PHBV) and multi‐walled carbon nanotubes (MWNTs) were prepared by solution processing. Ultrasonic energy was used to uniformly disperse MWNTs in solutions and to incorporate them into composites. Microscopic observation reveals that polymer‐coated MWNTs dispersed homogenously in the PHBV matrix. The thermal properties and the crystallization behavior of the composites were characterized by thermogravimetric analysis, differential scanning calorimetry and wide‐angle X‐ray diffraction, the nucleant effect of MWNTs on the crystallization of PHBV was confirmed, and carbon nanotubes were found to enhanced the thermal stability of PHBV in nitrogen. Copyright © 2004 Society of Chemical Industry     

Influence of amorphous alkaline lignin on the crystallization behavior and thermal properties of bacterial polyester

Bacterial polyester poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) and alkaline lignin composites were prepared via melt processing method, and the influence of amorphous lignin on the crystallization behavior and thermal properties of PHBV were investigated. It was found that dual melting peaks appeared in DSC curves of PHBV/lignin composites, while only one single peak existed in PHBV. The non‐isothermal crystallization process analyzed by Jeziorny method suggested that lignin changed the nucleation mode of composites and hindered the crystallization rate of PHBV. Data calculated from the results of WAXD demonstrated that lignin did not change the basic crystal structure of PHBV, but decreased the average size of the lamellar stacks. POM results confirmed that the effect of lignin on the crystallization behavior of PHBV carried out in two opposite way, namely the enhanced effect of nucleation and the hindered effect of growth. Besides, the thermal stability of composites was also decreased significantly. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41325.     

Effect of nucleating agents on the crystallization of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)

The effect of nucleating agents on the crystallization behavior of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) was studied. A differential scanning calorimeter was used to monitor the energy of the crystallization process from the melt and melting behavior. During the crystallization process from the melt, nucleating agent led to an increase in crystallization temperature (T_c) of PHBV compared with that for plain PHBV (without nucleating agent). The melting temperature of PHBV changed little with addition of nucleating agent. However, the areas of two melting peaks changed considerably with added nucleating agent. During isothermal crystallization, dependence of the relative degree of crystallization on time was described by the Avrami equation. The addition of nucleating agent caused an increase in the overall crystallization rate of PHBV, but did not influence the mechanism of nucleation and growth of the PHB crystals. The equilibrium melting temperature of PHBV was determined as 187°C. Analysis of kinetic data according to nucleation theories showed that the increase in crystallization rate of PHBV in the composite is due to the decrease in surface energy of the extremity surface. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2145–2152, 2002     

Thermal properties of blends of poly(hydroxybutyrate‐co‐hydroxyvalerate) and poly(styrene‐co‐acrylonitrile)

Thermal properties of blends of poly(hydroxybutyrate‐co‐hydroxyvalerate) (PHBV) and poly(styrene‐co‐acrylonitrile) (SAN) prepared by solution casting were investigated by differential scanning calorimetry. In the study of PHBV‐SAN blends by differential scanning calorimetry, glass transition temperature and melting point of PHBV in the PHBV‐SAN blends were almost unchanged compared with those of the pure PHBV. This result indicates that the blends of PHBV and SAN are immiscible. However, crystallization temperature of the PHBV in the blends decreased approximately 9–15°. From the results of the Avrami analysis of PHBV in the PHBV‐SAN blends, crystallization rate constant of PHBV in the PHBV‐SAN blends decreased compared with that of the pure PHBV. From the above results, it is suggested that the nucleation of PHBV in the blends is suppressed by the addition of SAN. From the measured crystallization half time and degree of supercooling, interfacial free energy for the formation of heterogeneous nuclei of PHBV in the PHBV‐SAN blends was calculated and found to be 2360 (mN/m)³ for the pure PHBV and 2920–3120 (mN/m)³ for the blends. The values of interfacial free energy indicate that heterogeneity of PHBV in the PHBV‐SAN blends is deactivated by the SAN. This result is consistent with the results of crystallization temperature and crystallization rate constant of PHBV in the PHBV‐SAN blends. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 673–679, 2000     

Crystallization kinetics of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)/clay nanocomposites

The preparation and properties of nanocomposites, consisting of a poly(3‐Hydroxybutyrate‐co‐3‐hydroxyvalerate) and an organophilic clay are described. The effect of organophilic clay on the crystallization behavior of (PHBV) was studied. A differential scanning calorimeter (DSC) was used to monitor the energy of the crystallization process from the melt. During the crystallization process from the melt, the organophilic clay led to an increase in crystallization temperature (T_c) of PHBV compared with that for plain PHBV. During isothermal crystallization, dependence of the relative degree of crystallization on time was described by the Avrami equation. The addition of organophilic clay caused an increase in the overall crystallization rate of PHBV, but did not influence the mechanism of nucleation, and growth of the PHBV crystals and the increase caused by a small quantity of clay is move effective than that large one. The equilibrium melting temperature of PHBV was determined as 186°C. Analysis of kinetic data according to nucleation theories showed that the increase in crystallization rate of PHBV in the composite is due to the decrease in surface energy of the extremity surface. The mechanical test shows that the tensile strength of hybrid increased to 35.6 MPa, which is about 32% higher than that of the original PHBV with the incorporation of 3 wt % clay, and the tensile modulus was also increased. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 655–661, 2004     

Natural polyphenol tannic acid reinforced poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) composite films with enhanced tensile strength and fracture toughness

Novel fully biodegradable composites were successfully prepared by solution casting. The mechanical properties, chemical structure and intermolecular interaction, the melting and crystallization behaviors, and crystalline morphologies of the Tannic acid (TA)/PHBV composites were investigated. Uniaxial tensile mechanical testing results show that both tensile strength and fracture toughness were enhanced. Fourier transform infrared (FTIR) results confirm the intermolecular hydrogen bonding interactions in composites. Differential scanning calorimetric (DSC) studies show that there is a significant increase in T_g and T_cc, and a decrease in melting temperature of TA/PHBV composites. The crystal growth behaviors and crystalline morphologies results were showed that with the addition of TA component, the size of PHBV spherulites reduces, and the number of PHBV spherulites increases significantly. POLYM. COMPOS., 36:2303–2308, 2015. © 2014 Society of Plastics Engineers     

Crystallization kinetics of bacterial poly(3‐hydroxylbutyrate) copolyesters with cyanuric acid as a nucleating agent

Effects of cyanuric acid (CA) on nonisothermal and isothermal crystallization, melting behavior, and spherulitic morphology of bacterial copolyesters of poly(3‐hydroxybutyrate), i.e., poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) and poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate) (PHBH), have been investigated. CA has excellent acceleration effectiveness on the melt crystallization of bacterial PHB, PHBV, and PHBH, better than the nucleating agents reported in the literatures, such as boron nitride, uracil, and orotic acid. PHBV and PHBH do not crystallize upon cooling from the melt at 10°C/min, while they are able to complete crystallization under the same conditions with an addition of 1% CA, with a presence of sharp crystallization exotherm at 75–95°C. Isothermal crystallization kinetics of neat and CA‐containing PHBV and PHBH were analyzed by Avrami model. Crystallization half‐times (t_1/2) of PHBV and PHBH decrease dramatically with an addition of CA. The melting behavior of isothermally melt‐crystallized PHBV and PHBH is almost not influenced by CA. Spherulitic numbers of PHBV and PHBH increase and the spherulite sizes reduce with an incorporation of CA. Nucleation densities of PHBV and PHBH increase by 3–4 orders of magnitude with a presence of 1% CA. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Morphology and properties of renewable poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) blends with thermoplastic polyurethane

Poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)/thermoplastic polyurethane (PHBV/TPU) composites were prepared by solution blending combined with melt processing in an effort to improve the toughness of PHBV and overcome the coalescence phenomena of TPU at the same time. The compatibility, cross‐section morphology, crystal structure, thermal behaviour, and mechanical properties of composites were investigated. Field emission scanning electron microscopy results showed that no distinct interface was found in composites, uniformly dispersed PHBV/TPU composites were obtained. The incorporation of TPU did not change the basic crystalline structure of PHBV, but decreased its crystallinity. What's more, the integrity of PHBV spherulites structure was destroyed and the radial growth rate of spherulites was inhibited. Differential scanning calorimetry results analyzed by Jeziorny method indicated that the nucleation mode of composites did not change. Besides, when TPU content was up to 40 wt%, the initial degradation temperature of PHBV/TPU composite was increased by 5°C, and the elongation‐at‐break was increased by 225% compared with those of PHBV. POLYM. ENG. SCI., 54:1113–1119, 2014. © 2013 Society of Plastics Engineers     

Layer double hydroxides for enhanced poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) crystallization

Enabling the widespread utilization of poly[(3‐hydroxybutyrate)‐co‐(3‐hydroxyvalerate)] (PHBV) is strongly associated with enhancing its crystallization kinetics. In this article, we utilize a highly surface active (one reactive group per nanometer square) anion exchanged layered‐double hydroxide (LDH) functionalized by stearic acid to probe the crystallization kinetics of PHBV. Our prior work has shown that the addition of LDH decreases the cold crystallization and induces a melt recrystallization peak in PHBV. Since the melt‐recrystallization temperature shifted to higher temperature and its corresponding enthalpy increased with increasing LDH loading, this article is focused on understanding the effect of LDH on kinetics and energetics of PHBV crystallization. Both Avrami and Lauritzen–Hoffman modeling are utilized to develop a comprehensive understanding of thermal history effects through differential scanning calorimetry and polarized optical microscopy measurements. Five concentrations by weight of LDH are used: 1, 3, 5, and 7%. The results show that the addition of LDH promoted both primary and secondary nucleation at low concentrations but additional LDH resulted in primary nucleation alone. The crystallization rate and activation energy show a significant increase, which is accompanied by a decrease in the nucleation constant, the surface energy and the work of chain folding for PHBV crystallization. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2013     

Reactive compatibilization and performance evaluation of miscanthus biofiber reinforced poly(hydroxybutyrate‐co‐hydroxyvalerate) biocomposites

Dicumyl peroxide (DCP) initiated reactive compatibilization of poly(hydroxybutyrate‐co‐hydroxyvalerate) (PHBV)/miscanthus fibers (70/30 wt %) based biocomposite was prepared in a twin screw extruder followed by injection molding. In the presence of DCP, both the flexural and the tensile strength of the PHBV/miscanthus composites were appreciably higher compared with PHBV/miscanthus composite without DCP as well as neat PHBV. The maximum tensile strength (29 MPa) and flexural strength (51 MPa) were observed in the PHBV/miscanthus composite with 0.7 phr DCP. The enhanced flexural and tensile strength of the PHBV/miscanthus/DCP composites are attributed to the improved interfacial adhesion by free radical initiator. Unlike flexural and tensile strength, the modulus of the PHBV/miscanthus/DCP composites was found to slightly lower than the PHBV/miscanthus composite. The modulus difference in the PHBV/miscanthus composite with and without DCP has good agreement with the observed crystallinity. However, the flexural and tensile modulus of all the prepared biocomposites was at least two fold higher than the neat PHBV. The storage modulus value of the PHBV/miscanthus and PHBV/miscanthus/DCP biocomposites follows similar trend like tensile and flexural modulus. The melting temperature and crystallization temperature of PHBV/DCP and PHBV/miscanthus/DCP samples were considerably lower compared with the neat PHBV and PHBV/miscanthus composites. The surface morphology revealed that the PHBV/miscanthus/DCP composites have good interface with less fiber pull‐outs compared with the corresponding counterpart without DCP. This suggests that the compatibility between the matrix and the fibers is enhanced after the addition of peroxide initiator. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44860.     

Production and characterization of UHMWPE/fumed silica nanocomposites

Ultrahigh‐molecular‐weight polyethylene (UHMWPE)/fumed silica nanocomposites were prepared via in situ polymerization using a bi‐supported Ziegler‐Natta catalytic system. Nanocomposites with different nanoparticle weight fractions were produced in order to investigate the effect of fumed silica on thermal and mechanical properties of UHMWPE/fumed silica nanocomposites. The viscosity average molecular weight (M ) of all samples including pure UHMWPE as the reference sample and nanocomposites were measured. Scanning electron microscope (SEM) images showed the homogenous dispersion of nanoparticles throughout the UHMWPE matrix while no nanoparticle cluster has been formed. Crystallization behavior of nanocomposites was investigated by differential scanning calorimetry (DSC), which showed a slight increase in melting temperature by enhancing the nanoparticle concentration while no significant change was observed in the crystallization temperature as the fumed silica concentration enhanced. The improvement in all thermal stability parameters was recorded by thermogravimetric analysis (TGA). Besides, via tensile testing, it was confirmed that addition of nanoparticles caused considerable improvement in such mechanical properties as Young's modulus, yield stress, and tensile strength of samples while the elongation at break declined by addition of more nanoparticles. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

On the use of ball milling to develop PHBV–graphene nanocomposites (I)—Morphology,thermal properties,and thermal stability

In the first part of this work, novel nanocomposites based on poly (3‐hydroxybutyrate co‐3‐hydroxyvalerate) (PHBV) and functionalized graphene nanosheets (FGS) were prepared through ball milling. As revealed by morphological characterization, this blending methodology was able to allow proper nanofiller dispersion and distribution into the matrix. Thermal properties were studied under non‐isothermal and isothermal conditions and the addition of FGS into PHBV matrix, although no changes in crystallization mechanism were observed, it modified the crystallization kinetics leading to increased crystallinity. Thermal stability analysis revealed that FGS affected the mechanism of oxidative thermal degradation and had no effect on thermal degradation by pyrolysis. Furthermore, an analysis of isothermal degradation kinetics showed that FGS speeded up the degradation rate. The Sestak‐Berggren model was used as a model to explain the isothermal degradation behavior of the obtained materials in good agreement with the experimental data. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42101.     

Crystallization and melting behavior of blends comprising poly(3‐hydroxy butyrate‐co‐3‐hydroxy valerate) and poly(ethylene oxide)

Blends of poly(3‐hydroxy butyrate‐co‐3‐hydroxy valerate) (PHBV) and poly(ethylene oxide) (PEO) were prepared by casting from chloroform solutions. Crystallization kinetics and melting behavior of blends have been studied by differential scanning calorimetry and optical polarizing microscopy. Experimental results reveal that the constituents are miscible in the amorphous state. They form separated crystal structures in the solid state. Crystallization behavior of the blends was studied under isothermal and nonisothermal conditions. Owing to the large difference in melting temperatures, the constituents crystallize consecutively in blends; however, the process is affected by the respective second component. PHBV crystallizes from the amorphous mixture of the constituents, at temperatures where the PEO remains in the molten state. PEO, on the other hand, is surrounded during its crystallization process by crystalline PHBV regions. The degree of crystallinity in the blends stays constant for PHBV and decreases slightly for PEO, with ascending PHBV content. The rate of crystallization of PHBV decreases in blends as compared to the neat polymer. The opposite behavior is observed for PEO. Nonisothermal crystallization is discussed in terms of a quasi‐isothermal approach. Qualitatively, the results show the same tendencies as under isothermal conditions. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2776–2783, 2006     

Comparison of covalent and noncovalent interactions of carbon nanotubes on the crystallization behavior and thermal properties of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)

In this study, multiwalled carbon nanotubes (MWCNTs) were dispersed into a poly(3‐hydroxybutyrate‐co?3‐hydroxyvalerate) (PHBV) matrix, in which PHBV was either covalently attached to the nanotubes through an esterification reaction between the carboxylic groups of functionalized MWCNTs and the hydroxyl groups of PHBV with toluene diisocyanate as a coupling agent or physically mixed to result in only noncovalent interactions. The structure, crystallization behavior, and thermal properties of the resulting nanocomposites were studied. We found that the crystallization of PHBV grafted onto the MWCNTs (PHBV‐g‐MWCNTs) was markedly hindered and exhibited an exothermic peak caused by cold crystallization, whereas the nonisothermal crystallization of PHBV was enhanced because a heterogeneous nucleation effect appeared in the PHBV/MWCNTs. Moreover, the maximum decomposition temperature of the PHBV‐g‐MWCNTs was improved by about 14.4°C compared with that of the PHBV/MWCNTs and by about 23.7°C compared with that of the original PHBV. Furthermore, the PHBV‐g‐MWCNTs exhibited the wider melt‐processing window than the PHBV/MWCNTs and original PHBV. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 4299–4307, 2013     

Thermal analysis of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) irradiated under vacuum

Poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) was irradiated by ⁶⁰Co γ‐rays (doses of 50, 100 and 200 kGy) under vacuum. The thermal analysis of control and irradiated PHBV, under vacuum was carried out by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The tensile properties of control and irradiated PHBV were examined by using an Instron tensile testing machine. In the thermal degradation of control and irradiated PHBV, a one‐step weight loss was observed. The derivative thermogravimetric curves of control and irradiated PHBV confirmed only one weight‐loss step change. The onset degradation temperature (T_o) and the temperature of maximum weight‐loss rate (T_p) of control and irradiated PHBV were in line with the heating rate (°C min^?1). T_o and T_P of PHBV decreased with increasing radiation dose at the same heating rate. The DSC results showed that ⁶⁰Co γ‐radiation significantly affected the thermal properties of PHBV. With increasing radiation dose, the melting temperature (T_m) of PHBV shifted to a lower value, due to the decrease in crystal size. The tensile strength and fracture strain of the irradiated PHBV decreased, hence indicating an increased brittleness. Copyright © 2004 Society of Chemical Industry     

Poly(hydroxybutyrate‐co‐hydroxyvalerate)/titanium dioxide nanocomposites: A degradation study

Nanocomposites, based on a poly(hydroxybutyrate‐co‐hydroxyvalerate) (PHBV) matrix and titanium dioxide (TiO₂) nanoparticles and fabricated with a solvent‐casting technique, were characterized with differential scanning calorimetry, thermogravimetric analysis, scanning electron microscopy, and Fourier transform infrared spectroscopy. The content of TiO₂ nanoparticles varied between 0.5 and 10 wt %. Degradation studies, including hydrolytic degradation in a strong base medium (1N NaOH) and degradation under ultraviolet light at 365 nm, were performed. It was confirmed that the inorganic filler had no great influence on thermal properties such as the melting and crystallization temperatures. Improved degradation temperatures were also confirmed with the increase in the filler content. Degradation observations confirmed significant increases in hydrolytic erosion with the filler content increasing in comparison with the degradation of a pure PHBV film. Also, the photocatalytic activity of the inorganic filler TiO₂ in all investigated composites [irradiated at λ = 365 nm and immersed in a liquid medium (H₂O)] was evaluated. The degraded samples were analyzed with Fourier transform infrared spectroscopy, which confirmed their increased crystallinity. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009