Characterization of the influence of main emulsion components on the physicochemical properties of orange beverage emulsion using response surface methodology

The present work was conducted to investigate the influence of main emulsion components, namely Arabic gum (7–13% w/w), xanthan gum (0.1–0.3% w/w) and orange oil (6–10% w/w) contents on physical stability, viscosity, cloudiness and conductivity of orange beverage emulsion. In this study, 20 orange beverage emulsions were established based on a three-factor central composite design (CCD) involving 8 factorial points, 6 axial points and 6 center points. The main objective of the present study was to determine an optimal concentration level of main emulsion components leading to an optimum orange beverage emulsion with desirable physicochemical properties. In general, all response surface models were significantly (p<0.05) fitted for describing the variability of physical stability, viscosity, conductivity and cloudiness as a nonlinear function of the content of main emulsion components. More than 84% of the variation of physicochemical properties of orange beverage emulsion could be explained as a function of the content of the main beverage emulsion components. In general, the orange oil content appeared to be the most significant (p<0.05) factor influencing all emulsion characteristics studied except for conductivity. From the optimization procedure, the overall optimal region leading to the desirable orange beverage emulsion was predicted to be achieved by the combined level of 13% (w/w) Arabic gum, 0.22% (w/w) xanthan gum and 10% (w/w) orange oil.     

Effect of Arabic gum,xanthan gum and orange oil on flavor release from diluted orange beverage emulsion

The influence of main emulsion components namely Arabic gum (13–20% w/w), xanthan gum (0.3–0.20% w/w) and orange oil (10–14% w/w) on semi-quantitative headspace analysis of target volatile flavor compounds released from a model orange beverage (diluted orange beverage emulsion) was evaluated by using a three-factor circumscribed central composite design (CCCD). For optimization procedure, the peak area of 13 volatile flavor compounds (i.e. ethyl acetate, α-pinene, ethyl butyrate, β-pinene, 3-carene, myrcene, limonene, γ-terpinene, octanal, decanal, linalool, neral and geranial) were considered as response variables. The response surface analysis exhibited that the significant (p < 0.05) second-order polynomial regression equations were successfully fitted for all response variables except for ethyl butyrate. A satisfactory coefficient of determination (R²) ranged from 0.831 to 0.969 (>0.8) was obtained for the response variables studied. No significant (p > 0.05) lack of fit was indicated for the reduced models except for the models fitted for limonene and linalool. This observation confirmed an accurate fitness of the reduced response surface models to the experimental data. The multiple response optimizations indicated that an orange beverage emulsion containing 15.87% (w/w) Arabic gum, 0.5% (w/w) xanthan gum and 10% (w/w) orange oil was predicted to provide the minimum overall flavor release.     

Response surface modeling for optimization of formulation variables and physical stability assessment of walnut oil-in-water beverage emulsions

The effect of Arabic gum content (5-10% w/w) and walnut-oil concentration (3-6% w/w) on properties of prepared walnut oil/water emulsion, including turbidity loss rate, density, size index, particle size and stability, was investigated using response surface methodology (RSM). For each response, a second-order polynomial model with high coefficient of determination (R²) values ranging from 0.907 to 0.989 was developed using multiple linear regression analysis. The lack of significant difference between the experimental and predicted values proved the adequacy of response surface equations for describing the physical changes of emulsions. An increase of Arabic gum content in range and initial concentration of walnut oil were associated with high emulsion stability and minimum droplet size. It can be concluded that RSM can determine the most suitable formulation (3% w/w walnut oil and 9.62% w/w Arabic gum) to achieve the highest stability in a developed beverage emulsion based on walnut oil.     

Study of emulsions stabilized with Phaseolus vulgaris or Phaseolus coccineus with the addition of Arabic gum, locust bean gum and xanthan gum

The properties of o/w emulsions stabilized with 1%w/v common bean (Phaseolus vulgaris L.), V or scarlet runner bean (P. coccineus L.), Coc extracted by isoelectric precipitation or ultrafiltration, at pH 7.0 and 5.5, with the addition of Arabic gum, locust bean gum, xanthan gum and a mixture of xanthan gum–locust bean gum (0.1 %w/v and 0.25 %w/v) are studied. The stability of emulsions was evaluated on the basis of oil droplet size, creaming, viscosity and protein adsorption measurements. The addition of Arabic gum, caused an increase in D[4,3] values and a decrease in the amount of protein adsorbed at the interface. The addition of locust bean gum in some emulsions reduced the amount of protein adsorbed. The addition of xanthan and to a less extend of the polysaccharide mixture, promoted a decrease in D[4,3]. So, emulsion stability was affected by the polysaccharide nature. Differences were also observed with respect to the protein nature, the method of its preparation and emulsion's pH. All polysaccharides enhanced the emulsions viscosity with xanthan and xanthan–locust bean gum exhibiting the higher values. V isolates and isoelectricaly precipitated isolates of both V, Coc showed higher viscosity values. The stability was enhanced by the increase of the viscosity of the continuous phase and the creation of a network, which prevents the oil droplets from coalescence.     

Rheological behavior and stability of d-limonene emulsions made by a novel hydrocolloid (Angum gum) compared with Arabic gum

Our goal was to evaluate emulsion stability, droplet size analysis and rheological behavior of the emulsions prepared by a native biopolymer namely Angum gum (An) compared with Arabic gum (Ar) stabilized emulsions. After gum extraction, gum dispersions with maltodextrin were prepared in water (in 1-5% concentrations) and emulsified with 5% and 10% d-limonene using high pressure homogenization. Statistical analysis revealed a significant influence of gum type and gum concentration on emulsion stability at α = 0.05. Flavor level was not important statistically in emulsion stability but it was the only factor with a significant influence (P < 0.05) on surface tension of the emulsions. The results showed that Angum gum was superior to Arabic gum in stabilizing emulsions during storage. Also, rheological data revealed that Angum gum-emulsions’ behavior was following the Herschel-Bulkley model with higher viscosities compared to Arabic gum emulsions, which could be the main reason of higher emulsion stabilities with this novel hydrocolloid.     

Effect of glycerol and vegetable oil on physicochemical properties of Arabic gum-based beverage emulsion

The effect of two emulsion components namely glycerol (0.5, 1 and 1.5% w/w) and vegetable oil (2, 3 and 4% w/w) on ζ-potential, conductivity, pH, apparent viscosity, fluid behavior, turbidity and cloud stability of orange beverage emulsion was investigated. The negatively charged ζ-potential significantly (p < 0.05) increased with increasing glycerol content. A slight increase in ζ-potential was observed by adding 2% (w/w) vegetable oil to the emulsion formulation, while it was slightly decreased when vegetable oil content was increased up to 4% (w/w). Apparent viscosity, pH and turbidity of orange beverage emulsions significantly (p < 0.05) increased when the concentration of glycerol or vegetable oil was increased. All prepared beverage emulsions behaved as non-Newtonian (i.e., pseudoplastic or shear thinning) fluids. The addition of different concentration levels of both supplementary emulsion components except for 0.5% (w/w) glycerol significantly (p < 0.05) improved the cloud stability of orange beverage emulsions.     

Monitoring air/liquid partition of mastic gum oil volatiles in model alcoholic beverage emulsions: Effect of emulsion composition and oil droplet size

The purpose of this work was to study the impact of the structure and composition of hydroalcoholic emulsions on the air–liquid partition of aroma compounds of the essential oil of Pistacia lentiscus var. chia, commonly known as mastic gum oil (mainly consists of terpenes). Oil-in-water emulsions (φ = 0.17), containing 15% (v/v) ethanol, stabilized by three different emulsifiers (sodium caseinate, whey protein isolate and Tween 40), were prepared by using two different lipid phases (sunflower oil and anhydrous butter fat). The homogenization conditions were varied to obtain emulsions with different volume–surface mean diameters. The partition of the volatile compounds between air phase and emulsions at three different temperatures (25, 37 and 50 °C) was monitored by applying the Headspace Solid Phase Microextraction technique, followed by gas chromatography–mass spectrometry (GC–MS) analysis. In general, the results obtained showed that sodium caseinate was the most effective in retaining mastic aroma compounds, while WPI was the least effective. This could partly be explained by the different structure of the two proteins which, when adsorbed at the interface, form a membrane that acts as a barrier and influences the partition of the aroma compounds between the air and the liquid. At the same time interactions of aroma compounds with the two proteins in the bulk phase may also play a role. The retention of the aroma compounds depended on the oil droplet size only in the case of sodium caseinate containing emulsions at 37 and 50 °C. This behaviour could be due to the substantial increase in the thickness of the adsorbed casein layer when moving from a fine sized emulsion to one with a much larger size as well as to differences in the ratio of free to adsorbed emulsifier. The composition of the lipid phase also appeared to have a significant impact on the concentration of volatile compounds in the headspace of mastic gum oil containing emulsions stabilized by proteins. This was lower in the case of butter fat probably due to differences in composition with regard to fatty acid degree of saturation as well as to volatile absorption by the liquid lipid at 40 °C and subsequent entrapment in the semisolid fat at 25 °C.     

Droplet characterization and stability of soybean oil/palm kernel olein O/W emulsions with the presence of selected polysaccharides

Droplet characteristics, flow properties and stability of egg yolk-stabilized oil-in-water (O/W) emulsions as affected by the presence of xanthan gum (XG), carboxymethyl cellulose (CMC), guar gum (GG), locust bean gum (LBG) and gum Arabic (AG) were studied. The dispersed phase (40%) of the emulsions was based on soybean oil/palm kernel olein blend (70:30) that partially crystallized during extended storage at 5 °C. In freshly prepared emulsions, the presence of XG, CMC, GG and LBG had significantly decreased the droplet mean diameters. XG, LBG, GG and CMC emulsions exhibited a shear-thinning behavior but AG emulsion exhibited a Bingham plastic behavior and control (without gum) emulsion almost exhibited a Newtonian behavior. Both control and AG emulsions exhibited a severe phase separation after storage (30 days, 5 °C). The microstructure of stored XG emulsion showed the presence of partially coalesced droplets, explaining a large increase in its droplet mean diameters. Increases in droplet mean diameters and decreases in flow properties found for stored GG and LBG emulsions were attributed to droplet coalescence. Nevertheless, the occurrence of droplet coalescence in these emulsions was considered to be small as no free oil could be separated under centrifugation force. Increases in flow properties and excellent stability towards phase separation found for stored CMC emulsion suggested that CMC could retard partial coalescence. Thus, the results support the ability of CMC, GG and LBG in reducing partial coalescence either by providing a sufficiently thick continuous phase or by acting as a protective coating for oil droplets.     

Solid-phase microextraction for headspace analysis of key volatile compounds in orange beverage emulsion

Headspace solid-phase microextraction (HS-SPME) gas chromatography was used to analyze target flavor compounds in orange beverage emulsion. The effects of SPME fiber (PDMS 100 μm, CAR/PDMS 75 μm, PDMS/DVB 65 μm and DVB/CAR/PDMS 50/30 μm), adsorption temperature (25–45 °C), adsorption time (5–25 min), sample concentration (1–100%), sample amount (5–12.5 g), pH (2.5–9.5), salt type (K₂CO₃, Na₂CO₃, NaCl and Na₂SO₄), salt amounts (0–30%) and stirring mode were studied to develop HS-SPME condition for obtaining the highest extraction efficiency and aroma recovery. For the head space volatile extraction, the optimum conditions were: CAR/PDMS fiber, adsorption at 45 °C for 15 min, 5 g of diluted beverage emulsion (1:100), 15% (w/w) of NaCl with stirring and original pH 4. The main volatile flavor compounds were: limonene, 94.9%; myrcene, 1.2%; ethyl butyrate, 1.1%; γ-terpinene, 0.41%; linalool, 0.36%; 3-carene, 0.16%; decanal, 0.12%; ethyl acetate, 0.1%; 1-octanol, 0.06%; geranial, 0.05%; β-pinene, 0.04%; octanal, 0.03%; α-pinene, 0.03%; and neral, 0.03%. The linearity was very good in the considered concentration ranges (R² ? 0.97). Average recoveries ranged from 88.3% to 121.7% and showed good accuracy for the proposed analytical method. Average relative standard deviation (RSD) for five replicate analyses was found to be less than 14%. The limit of detection (LOD) ranged from 0.06 to 2.27 mg/l for all volatile flavor compounds and confirmed the feasibility of the HS-SPME technique for headspace analysis of orange beverage emulsion. The method was successfully applied for headspace analysis of five commercial orange beverage emulsions.     

Physical and Oxidative Stabilities of O/W Emulsions Formed with Rice Dreg Protein Hydrolysate: Effect of Xanthan Gum Rheology

The shortening of shelf-life of food emulsions is frequently due to poor creaming and lipid oxidation stability. The lipid oxidation of O/W emulsions can be inhibited by rice dreg protein hydrolysate (RDPH); however, emulsions were stabilized by Tween-20. Polysaccharides can control the rheology and network structure of the aqueous continuous phase by increasing viscosity and yield stress, hence retarding phase separation and gravity-induced creaming, especially for xanthan gum. The objective of this research was to evaluate whether emulsions formed with 2 wt% RDPH and stabilized by xanthan gum (0–0.5 wt%) could produce 20 % (v/v) soybean oil-in-water emulsions that had good physical and oxidative stability. The degree of flocculation of droplets as a function of xanthan gum concentration was assessed by the microstructure, rheology, and the creaming index of emulsions. Addition of xanthan gum prior to homogenization had no significant effect on the mean droplet diameter in all emulsions studied. Increase in xanthan gum concentration led to the increase in creaming stability of emulsions, due to an increase in viscosity of the continuous phase and/or the formation of a droplet network with a yield stress, as well as the enhanced steric and electrostatic repulsion between the droplets. Lipid oxidation of the emulsions was significantly inhibited at xanthan gum concentrations of 0.12 wt% or above with RDPH, which could due to the fact that xanthan gum increases the viscosity of the aqueous phase and hindered the diffusion of oxidants to the oil droplet surface area, synergistic effect between RDPH and xanthan gum to suppress oil peroxidation, and metal ion chelation capability of xanthan gum. Thus, stable protein hydrolyzates-type emulsions could be obtained with increasing concentration of xanthan gum.     

黄原胶对酪蛋白酸钠乳状液稳定性的影响

研究了一定pH条件下,黄原胶浓度及剪切稀化效应对酪蛋白酸钠乳状液稳定性的影响。结果表明,在酸性条件下,黄原胶无法抑制酪蛋白的变性沉淀,乳液在制备之初,即产生严重絮凝。在中性和弱碱性条件下,黄原胶在一定浓度范围内,诱发了乳状液的排斥絮凝;体系的pH显著影响了乳状液的稳定性,pH6条件下,较低的黄原胶浓度(0.2wt%)便可赋予乳状液良好的稳定性。均质过程大大降低了黄原胶的粘度,导致乳状液的稳定性下降,与添加未经均质处理的黄原胶相比,添加量增大近一倍,才能获得稳定的乳状液。     

Influence of emulsion composition and inlet air temperature on the microencapsulation of flaxseed oil by spray drying

The objective of this work was to study the influence of some process conditions on the microencapsulation of flaxseed oil by spray drying. The process was carried out on a mini spray dryer and gum Arabic was used as wall material. Seventeen tests were made, according to a central composite design. Independent variables were: inlet air temperature (138-202 °C), total solid content (10-30% w/w) and oil concentration with respect to total solids (10-30% w/w). Encapsulation efficiency, lipid oxidation and powder bulk density were analyzed as responses. Powder morphology and particle size distribution were also analyzed. The feed emulsions were characterized with respect to droplet size and viscosity. Higher solid content and lower oil concentration led to higher encapsulation efficiency and lower lipid oxidation, which was related to the higher emulsion viscosity and lower droplets size. Increasing drying temperature resulted in higher lipid oxidation. Bulk density increased when higher solid content and lower inlet air temperature were used. The particles were rounded and shriveled, and their mean diameter was mainly affected by total solid content.     

Evaluation of aging mechanisms of olive oil–lemon juice emulsion through digital image analysis

The aging mechanisms of olive oil–lemon juice emulsions were investigated. The emulsions were prepared with xanthan gum where different concentrations of modified starch or maltodextrin were added. Emulsions stability was followed through analysis of the evolution of mean droplet size measured by image analysis during 203 days. All the samples presented phase separation at the end of the studied storage period. The stability results indicate that large droplets mean diameter were obtained in samples where maltodextrin or only xanthan gum was used. The study of the evolution of the droplet mean diameter with time show that the studied salad dressing ages preferentially through coalescence, although in certain cases molecular diffusion may occur. The incorporation of xanthan gum in salad dressing emulsions has a large influence in their rheological behavior.     

Effects of protein concentration and oil-phase volume fraction on the stability and rheology of menhaden oil-in-water emulsions stabilized by whey protein isolate with xanthan gum

The influences of protein concentration (0.2, 1, 2 wt%) and oil-phase volume fraction (5%, 20%, 40% v/v) on emulsion stability and rheological properties were investigated in whey protein isolate (WPI)-stabilized oil-in-water emulsions containing 0.2 wt% xanthan gum (XG). The data of droplet size, surface charge, creaming index, oxidative stability, and emulsion rheology were obtained. The results showed that increasing WPI concentration significantly affected droplet size, surface charge, and oxidative stability, but had little effect on creaming stability and emulsion rheology. At 0.2 wt% WPI, increasing oil-phase volume fraction greatly increased droplet size but no significant effect on surface charge. At 1 or 2 wt% WPI, increasing oil-phase volume fraction had less influence on droplet size but led to surface charge more negative. Increasing oil-phase volume fraction facilitated the inhibition of lipid oxidation. Meanwhile, oil-phase volume fraction played a dominant role in creaming stability and emulsion viscosity. The rheological data indicated the emulsions may undergo a behavior transition from an entropic polymer gel to an enthalpic particle gel when oil-phase volume fraction increased from 20% to 40% v/v.     

Steady and Dynamic Shear Rheological Properties,and Stability of Non-Flocculated and Flocculated Beverage Cloud Emulsions

Rheological properties of single-phase, and emulsions containing modified starch and gum arabic as surface active hydrocolloids, as well as xanthan and tragacanth gums as stabilizers were evaluated under steady and dynamic shear testing conditions using a control stress rheometer. Emulsions were formed by 9% and 14% gum concentrations with oil concentration maintained at 9% thus giving a 1:1 and 1.5:1 surface active agent to oil ratio, respectively. The rates of droplet coalescence and creaming, for a total of 8 emulsions, as a function storage time before and after dilution in a simulated fruit beverage were then investigated. Steady shear (flow curve) were well described by the Carreau model at shear stress ranging from 0.01 to 100 Pa. All prepared water phases indicated a zero-shear viscosity plateau followed by shear thinning behavior with flow behavior index (n) ranging from 0.51 to 0.79 for 14% starch-0.3% xanthan and 14% gum arabic-0.8% tragacanth stabilized emulsions, respectively. The water phase flow property data were well fitted by the Einstein equation and its expansions. The dynamic rheological properties of water phase and emulsions were also evaluated for G′(ω) and G″(ω) from 1 to 50 rad/s. Similar curves were obtained with varying degrees of deviations (G′ from G″) for different emulsions. Starch-xanthan emulsion and associated water phase at 1.5/1 agent to oil ratio demonstrated viscoelastic behavior (G′ ≥ G″) with lower droplet coalescence and creaming rates. On the other hand, gum arabic-xanthan emulsion at 1:1 agent to oil ratio showed the highest rate of droplet coalescence and a greater degree of creaming. It was speculated that the lower stability of gum arabic-xanthan emulsion could be related to the denaturation of proteinaceous part in the gum and loss of emulsification capacity due to lower pH and pasteurization.     

面筋蛋白粒子-黄原胶Pickering乳液的制备及其表征

制备黄原胶与面筋蛋白纳米粒协同稳的Pickering乳液,表征Pickering乳液的物理化学性能和微观结构。结果显示：通过黄原胶与面筋蛋白纳米粒协同作用,可制备出稳定性较好的Pickering乳液。低质量分数的黄原胶（0.2%）会促进乳析;当黄原胶质量分数不小于0.3%时,乳液于4 ℃贮存30 d仍无乳析现象;当黄原胶质量分数为1%时,贮存30 d乳液出现析油的现象。不同乳化顺序得到乳液的稳定性不同。乳液M-WG-XG（面筋蛋白纳米粒与玉米油乳化得粗乳液,然后加入黄原胶二次分散）的稳定性最好,同时乳液的平均粒径最小（21.4±0.314）μm。黄原胶的加入增大了乳液的净电荷,乳液的稳定性提高。共聚焦显微镜结果表明,乳液M-WG-XG液滴分布均匀,界面层呈现出多层结构。相比于其他方式制备的乳液,乳液M-WG-XG有更好的黏弹性和离子稳定性。     

Emulsifying properties of sweet potato protein: Effect of protein concentration and oil volume fraction

The effect of protein concentrations (0.1, 0.25, 0.5, 1.0, 1.5 and 2.0% w/v) and oil volume fractions (5, 15, 25, 35 and 45% v/v) on properties of stabilized emulsions of sweet potato proteins (SPPs) were investigated by use of the emulsifying activity index (EAI), emulsifying stability index (ESI), droplet size, rheological properties, interfacial properties and optical microscopy measurements at neutral pH. The protein concentration or oil volume fraction significantly affected droplet size, interfacial protein concentration, emulsion apparent viscosity, EAI and ESI. Increasing of protein concentration greatly decreased droplet size, EAI and apparent viscosity of SPP emulsions; however, there was a pronounced increase in ESI and interfacial protein concentration (P < 0.05). In contrast, increasing of oil volume fraction greatly increased droplet size, EAI and emulsion apparent viscosity of SPP emulsions, but decreased ESI and interfacial protein concentration significantly (P < 0.05). The rheological curve suggested that SPP emulsions were shear-thinning non-Newtonian fluids. Optical microscopy clearly demonstrated that droplet aggregates were formed at a lower protein concentration of <0.5% (w/v) due to low interfacial protein concentration, while at higher oil volume fractions of >25% (v/v) there was obvious coalescence. In addition, the main components of adsorbed SPP at the oil–water interface were Sporamin A, Sporamin B and some high-molecular-weight aggregates formed by disulfide linkage.     

EFFECTS OF ADDED WEIGHTING AGENT AND XANTHAN GUM ON STABILITY AND RHEOLOGICAL PROPERTIES OF BEVERAGE CLOUD EMULSIONS FORMULATED USING MODIFIED STARCH

Stability of beverage emulsion is measured by the rate at which the emulsion creams, flocculates or coalesces, and is generally dependent on rheology of water phase, difference in specific gravities of the two phases and droplet size/distribution of the emulsion. The effects of weighting agents (sucrose acetate isobutyrate and brominated vegetable oil) and xanthan gum on modified starch‐based emulsions were evaluated in this study. Emulsion was formed by addition of 9% coconut oil, in the presence or absence of weighting agents, into the water phase containing modified starch at 10, 12 or 14% without or with the addition of 0.3% xanthan gum. Stabilities of emulsions were evaluated both in the concentrated form used for storage and dilute form used in beverages. The addition of xanthan gum into the water phase decreased the flow behavior index (n) from 0.88 down to 0.31 and increased elastic modulus (G′) over 20 times at elevated frequency (ω = 50 rad/s) and elevated the stability of the emulsion. The xanthan gum‐added emulsion had smaller particle size and demonstrated 14 and 5 times slower phase separation compared to the emulsions without or with the addition of weighting agents, respectively. When the elastic modulus was larger than the viscous modulus (G′ > G″), the emulsions demonstrated greater stability. In dilute beverage solutions, creaming was observed in the absence of xanthan gum.     

Influence of xanthan gum on the formation and stability of sodium caseinate oil-in-water emulsions

Studies have been made of the changes in droplet sizes, surface coverage and creaming stability of emulsions formed with 30% (w/w) soya oil, and aqueous solution containing 1 or 3% (w/w) sodium caseinate and varying concentrations of xanthan gum. Addition of xanthan prior to homogenization had no significant effect on average emulsion droplet size and surface protein concentration in all emulsions studied. However, addition of low levels of xanthan (≤0.2 wt%) caused flocculation of droplets that resulted in a large decrease in creaming stability and visual phase separation. At higher xanthan concentrations, the creaming stability improved, apparently due to the formation of network of flocculated droplets. It was found that emulsions formed with 3% sodium caseinate in the absence of xanthan showed extensive flocculation that resulted in very low creaming stability. The presence of xanthan in these emulsions increased the creaming stability, although the emulsion droplets were still flocculated. It appears that creaming stability of emulsions made with mixtures of sodium caseinate and xanthan was more closely related to the structure and rheology of the emulsion itself rather than to the rheology of the aqueous phase.