Effect of processing on antinutrients and in vitro protein digestibility of kidney bean (Phaseolus vulgaris L.) varieties grown in East Africa

The effects of hydration, autoclaving, germination, cooking and their combinations, on the reduction/elimination of antinutrients, flatus-producing compounds and the improvement of in vitro protein digestibility of three selected Phaseolus vulgaris varieties were investigated. Reduction in the amount of total α-galactosides was attained by employing hydration process and was due to the differential solubility of the individual oligosaccharides and their diffusion rates. Due to their heat-sensitive nature, saponins, trypsin inhibitors and phytohaemagglutinins, diminished drastically to undetectable amounts when heating processes (cooking and autoclaving) were employed. Hydration and germination processes were less effective in reducing trypsin inhibitors, saponins and phytohaemagglutinins as compared with cooking/autoclaving processes. Germination process reduced stachyose, raffinose, phytic acid and tannins which was due to metabolic activity. The combination of germination followed by autoclaving processes yielded the most promising result in this study. The bean variety Roba exhibited better protein digestibility on processing and thus has high potential to be used as a raw material for the manufacturing of value-added products.     

Content of flavonols in Italian bean (Phaseolus vulgaris L.) ecotypes

Methanol extracts of seeds from 23 accessions of 3 Phaseolus vulgaris ecotypes (“Sarconi”, “Lamon”, “Zolfino del Pratomagno”), grown in different Italian regions (Basilicata, Veneto, Tuscany) were analyzed for their flavonoid content. Flavonoid glycosides were found in the seed coat from ten accessions of the “Zolfino” ecotype and in one accession of the “Sarconi” ecotype. From highest to lowest concentration these compounds were kaempferol 3-O-glucoside (compound 2), kaempferol 3-O-xylosylglucoside (compound 1) and a not completely identified kaempferol monoglucoside (compound 3). Total flavonol content varied from 0.19 to 0.84 g/kg of seed fresh weight. A great variability in the total flavonol content, being between 18% and 50%, and in the relative abundance of different kaempferol derivatives was observed for the same genotypes sampled in the original locations in the 2001–2003 period. Fluctuation in flavonol content suggests that further researches are necessary for an exhaustive comprehension of physiological mechanisms influencing the expression of these phenolic compounds. Obtained results evidenced that some Italian bean ecotypes may be an important source of functional compounds as kaempferol glycosides.     

The polyphenolic profiles of common bean (Phaseolus vulgaris L.)

Based on the phenolic profiles obtained by high performance liquid chromatography-electrospray ionization mass spectrometry (HPLC-DAD-ESI/MS), 24 common bean samples, representing 17 varieties and 7 generic off-the-shelf items, belonging to ten US commercial market classes can be organized into six different groups. All of them contained the same hydroxycinnaminic acids, but the flavonoid components showed distinct differences. Black beans contained primarily the 3-O-glucosides of delphinidin, petunidin and malvidin, while pinto beans contained kaempferol and its 3-O-glycosides. Light red kidney bean contained traces of quercetin 3-O-glucoside and its malonates, but pink and dark red kidney beans contained the diglycosides of quercetin and kaempferol. Small red beans contained kaempferol 3-O-glucoside and pelargonidin 3-O-glucoside, while no flavonoids were detected in alubia, cranberry, great northern, and navy beans. This is the first report of the tentative identification of quercetin 3-O-pentosylhexoside and flavonoid glucoside malonates, and the first detailed detection of hydroxycinnamates, in common beans.     

Functional properties and in vitro trypsin digestibility of red kidney bean (Phaseolus vulgaris L.) protein isolate: Effect of high-pressure treatment

The effects of high-pressure (HP) treatment at 200–600 MPa, prior to freeze-drying, on some functional properties and in vitro trypsin digestibility of vicilin-rich red kidney bean (Phaseolus vulgaris L.) protein isolate (KPI) were investigated. Surface hydrophobicity and free sulfhydryl (SH) and disulfide bond (SS) contents were also evaluated. HP treatment resulted in gradual unfolding of protein structure, as evidenced by gradual increases in fluorescence strength and SS formation from SH groups, and decrease in denaturation enthalpy change. The protein solubility of KPI was significantly improved at pressures of 400 MPa or higher, possibly due to formation of soluble aggregate from insoluble precipitate. HP treatment at 200 and 400 MPa significantly increased emulsifying activity index (EAI) and emulsion stability index (ESI); however, EAI was significantly decreased at 600 MPa (relative to untreated KPI). The thermal stability of the vicilin component was not affected by HP treatment. Additionally, in vitro trypsin digestibility of KPI was decreased only at a pressure above 200 MPa and for long incubation time (e.g., 120 min). The data suggest that some physiochemical and functional properties of vicilin-rich kidney proteins can be improved by means of high-pressure treatment.     

Physicochemical, functional and structural properties of vicilin-rich protein isolates from three Phaseolus legumes: Effect of heat treatment

The physicochemical, functional and structural properties of vicilin-rich protein isolates from kidney, red and mung beans (KPI, RPI and MPI) were investigated, and the influences of heating (at 95 °C for 30 min) were also evaluated and compared. In the untreated samples, the thermal stability, free SH contents and surface hydrophobicity were different. The differences seemed to be closely related to the differences in extent of aggregation and/or tertiary and secondary conformational structures among proteins. The heating resulted in extensive denaturation of the protein, significant decreases in free SH groups and increases in surface hydrophobicity, but to a varying extent, depending on the type of protein isolates. The protein solubility and emulsifying activities were significantly improved by the heating. The tertiary and secondary structures of these proteins were also to a various extent affected. The conformational structures of proteins in RPI were most flexible, and susceptible to the heating, while the proteins in KPI were most heat-stable in structures. The results clearly indicated close relationships between functional properties of these vicilin-rich protein isolates and their conformational structures.     

Effects of limited enzymatic hydrolysis with trypsin on the functional properties of hemp (Cannabis sativa L.) protein isolate

Effects of limited enzymatic hydrolysis induced by trypsin on the physicochemical and functional properties of hemp (Cannabis sativa L.) protein isolate (HPI) were investigated. The enzymatic hydrolysis was confirmed by sodium dodecyl-sulfate polyacrylamide gel electrophoresis (SDS-PAGE) and size exclusion chromatography (SEC). SEC and differential scanning calorimetry (DSC) analyses confirmed the presence of aggregates in the corresponding hydrolysates (with the degree of hydrolysis of 2.3–6.7%). Functional properties, including protein solubility (PS), thermal properties, emulsifying and foaming properties, and water holding and fat adsorption capacities (WHC and FAC) were evaluated. The PS was remarkably improved by the limited enzymatic hydrolysis at all tested pH values. However, the enzymatic hydrolysis led to the marked decreases in emulsifying activity index, foaming capacity and foam stability, WHC and FAC. These decreases were to a great extent related to the presence of aggregates in the hydrolysates.     

Emulsifying and foaming properties of Phaseolus vulgaris and coccineus proteins

Protein isolates from two Phaseolus cultivars, common bean (Phaseolus vulgaris L.) and scarlet runner bean (Phaseolus coccineus L.), were prepared by wet extraction methods (isoelectric precipitation – 4000 rpm, ultrafiltration, extraction with NaCl 2%, and isoelectric precipitation – 9900 rpm). The protein isolates were characterized by sodium dodecyl sulfate–polyacrylamide gel electrophoresis and then evaluated for their solubility. The emulsion stability of emulsions produced at pH 7.0 and 5.5 with 1% or 2% or 3% w/v protein isolate was evaluated by average droplet size diameter, viscosity and creaming measurements. Emulsions with 1% protein content were unstable through storage. Emulsions with 3% w/v protein isolate concentration, extracted by ultrafiltration at pH 5.5 from both cultivars, were flocculated; this was more pronounced for coccineus isolates. The foaming properties, for the respective foams, were investigated. Foams with 1% w/v protein showed little foaming ability Ultrafiltration isolates produced more foam, which was especially stable at pH 5.5.     

Thermal aggregation and gelation of kidney bean (Phaseolus vulgaris L.) protein isolate at pH 2.0: Influence of ionic strength

Thermal aggregation and gelation of kidney bean protein isolate (KPI) at pH 2.0 and varying ionic strengths (0–300 mM) were investigated using dynamic light scattering (DLS), atomic force microscopy (AFM), and turbidity and dynamic oscillatory measurements. DLS and AFM analyses showed that the extent of thermal aggregation at pH 2.0, or contour length of the worm-like and fine-stranded aggregates, progressively increased with increasing ionic strength. Turbidity and dynamic rheological analyses indicated that, the turbidity and mechanical moduli of the formed gels also increased with the increase in both ionic strength and protein concentration (c). The c dependence of the elastic modulus G′ could be well described using both fractal and percolation models, though in the case of fractal model applied, two distinct scaling regimes were observed. These results suggest that at pH 2.0, the thermal aggregation and gelation behaviors of the proteins in KPI could be remarkably affected by a change in electrostatic repulsion, and homogenous fine-stranded gels formed at ionic strengths in the 0–300 mM range.     

Deterrent and insecticidal properties of bean seed (Phaseolus vulgaris L.) whole meal or protein extract incorporated into the diet of Callosobruchus maculatus (F.) (Coleoptera: Bruchidae)

Callosobruchus maculatus, a pest that causes serious damage to chickpea Cicer arietinum, cannot develop in the seeds of Phaseolus or Vigna spp. which contain lectins. The insecticidal activity towards C. maculatus in these seeds is attributed both to lectins with specific affinity to N-acetylglucosamine, the major component of insect chitin, and to alpha-amylase inhibitors (lectin-like proteins). The insecticidal properties of bean meal or bean protein extracts from different sources towards different pest species are variable and need to be experimentally evaluated. The main objective of this study was to determine through a feeding trial on artificial chickpea seed the potential of bean seed meal from a wild bean Vigna caracalla, four varieties of Phaseolus vulgaris, and of a protein extract of P. vulgaris seed, to alter different life history traits of C. maculatus. The chickpea weevil was set up on artificial chickpea seeds containing different amounts of bean meal to observe the effects on female oviposition, percentage of development to adulthood and juvenile development time. These traits were combined in a composite index measuring the alteration of the multiplication rate of C. maculatus fed on artificial seed. The activity of lectin-like extracts was observed on chickpea artificial seed spiked with bean seed extract. Incorporation of bean flour at a rate of 10 and 20% in chickpea artificial seed significantly decreased C. maculatus female fecundity, percentage of adult emergence, and greatly increased the development time. Feeding trials with protein extracts of P. vulgaris reduced fecundity and survival of C. maculatus. Incorporation of 10% V. caracalla bean seed meal in chickpea artificial seed, reduced the multiplication potential of C. maculatus by over 90% showing that bean seed lectin extracts are worthy of further investigation for post-harvest infestation control.     

Functional and conformational properties of phaseolin (Phaseolus vulgris L.) and kidney bean protein isolate: A comparative study

BACKGROUND: Kidney bean (Phaseolus vulgris L.) seed is an underutilised plant protein source with good potential to be applied in the food industry. Phaseolin (also named G1 globulin) represents about 50 g kg^?1 of total storage protein in the seed. The aim of the present study was to characterise physicochemical, functional and conformational properties of phaseolin, and to compare these properties with those of kidney bean protein isolate (KPI). RESULTS: Compared with kidney bean protein isolate (KPI), the acid‐extracted phaseolin‐rich protein product (PRP) had much lower protein recovery of 320 g kg^?1 (dry weight basis) but higher phaseolin purity (over 950 g kg^?1). PRP contained much lower sulfhydryl (SH) and disulfide bond contents than KPI. Differential scanning calorimetry analyses showed that the phaseolin in PRP was less denatured than in KPI. Thermal analyses in the presence or absence of dithiothreitol, in combination with SH and SS content analyses showed the contributions of SS to the thermal stability of KPI. The analyses of near‐UV circular dichroism and intrinsic fluorescence spectra indicated more compacted tertiary conformation of the proteins in PRP than in KPI. PRP exhibited much better protein solubility, emulsifying activity index, and gel‐forming ability than KPI. The relatively poor functional properties of KPI may be associated with protein denaturation/unfolding, with subsequent protein aggregation. CONCLUSION: The results presented here suggest the potential for acid‐extracted PRP to be applied in food formulations, in view of its functional properties. Copyright © 2009 Society of Chemical Industry     

Genetic and environmental effects on chemical composition related to sensory traits in common beans (Phaseolus vulgaris L.)

The chemical composition determines plant-derived foods’ sensory traits; genetic and environmental effects and their interactions determine chemical composition. Understanding the importance of each factor should help characterise foodstuffs according to the variety and place of cultivation. We studied the effects of variety (five landraces + two checks) and environment (five locations and two years) on some molecules important for beans’ (Phaseolus vulgaris L.) sensory value. The greatest location effects were on protein and starch content and variety effects were due to combinations of traits (mainly sucrose, protein, and malic acid). The variety × location interactions detected in protein, sucrose, citric acid, and malic acid were difficult to associate to the gastronomic success of a particular variety cultivated at a particular location. Our results showed that protected designation of origin (PDO) in beans could be delimited on the basis of chemical composition, derived from the particular environmental characteristics of a region and the genetic characteristics of the varieties admitted.     

Comparative study of the composition and thermal properties of protein isolates prepared from nine Phaseolus vulgaris legume varieties

Beans contain high amounts of protein and, as demonstrated with other legumes, may contain peptides with bioactive properties. Dozens of dry bean (Phaseolus vulgaris) varieties are grown in Canada, and many vary not only in terms of their protein content but also in their composition. In this study, the composition, molecular structure, and thermal properties of nine varieties of P. vulgaris were studied using electrophoresis, reversed-phase high-performance liquid chromatography (RP-HPLC), differential scanning calorimetry (DSC), and Fourier-transform infrared spectroscopy (FTIR). The predominant protein observed in each variety was vicilin. RP-HPLC chromatogram showed protein isolates (PIs) of white, great northern and black beans to have different profiles of low-molecular-weight proteins. Additionally, black bean PIs were missing proteins in the molecular mass (MM) range of 60 to 97 kDa. DSC analysis showed cranberry and light red kidney bean PIs to have significantly lower denaturation temperatures compared to the other varieties. RP-HPLC chromatograms of cranberry and light red kidney bean PIs were also very different. FTIR spectroscopy showed the predominant secondary structures in all varieties to be ??-sheets and random coils. Increasing the temperature from 25 °C to 95 °C resulted in a reduction in ??-sheet structures and an increase in the content of random coils and antiparallel ??-sheet structures. Overall there were no major dissimilarities observed in the FTIR profiles of the nine P. vulgaris varieties.     

In vitro and in vivo protein hydrolysis of beans (Phaseolus vulgaris) genetically modified to express different phaseolin types

Experiments were conducted to study whether phaseolin type could influence proteolysis susceptibility and nutritional value of total bean protein. The DOR-390 bean cultivar was genetically modified to express different phaseolin types (S, T or I). Beans were soaked and autoclaved. A sequential hydrolysis was carried out in vitro with pepsin and pancreatin. Differences in the degree of protein hydrolysis among bean lines started at 30 min and remained until 240 min, with the S bean proteins presenting lower values (P < 0.05). Subsequently, rats were fed with diets containing beans expressing different phaseolin types as the only source of protein for N digestibility and nutritional value determination. No differences (P > 0.05) in ileal protein digestibility and rat growth were observed. In conclusion, the differences in in vitro hydrolysis between bean lines expressing different phaseolin types had no consequences on growth and N retention in rats.     

Chemical analysis of French beans (Phaseolus vulgaris L.) by headspace solid phase microextraction (HS-SPME) and simultaneous distillation/extraction (SDE)

Headspace Solid Phase Microextraction (HS-SPME) involving divinylbenzene/carboxen/polydimethylsiloxane (DVB/CAR/PDMS) fibre and simultaneous distillation/extraction (SDE) techniques were applied to study the volatile and semi volatile compounds of thawed and cooked Phaseolus vulgaris L. A total of 104 compounds were detected by GC and GC/MS. Thereof, 76 compounds were identified for the first time in this species. The major differences between HS-SPME and SDE were found in the content of identified alcohols (23.62% SDE versus 62.20% SPME), terpenoids (39.15% SDE versus 2.45% SPME), heterocyclic compounds (13.78% SDE versus 1.21% SPME), hydrocarbons (2.22% SDE versus 13.87% SPME) and esters (0.98% SDE versus 12.98% SPME). The SPME technique was found to be useful for rapid and routine quality controls of thawed French beans, while SDE is favourable to study the entire set of flavour volatiles in the corresponding cooked samples.     

Physical and functional characteristics of selected dry bean (Phaseolus vulgaris L.) flours

Many varieties of dry beans (Phaseolus vulgaris L.) are available with entirely different physico-chemical and sensory characteristics. Selected dry bean varieties (red kidney, small red kidney, cranberry and black) were processed into flour and analyzed for the physico-chemical and functional characteristics. The bulk density of the beans flours varied significantly (p < 0.05) from 0.515 g/ml for black bean flour to 0.556 g/ml for red kidney bean flour. The small red kidney bean flour had the highest water absorption capacity (2.65 g/g flour) while black bean flour showed the lowest at 2.23 g/g flour. Significant differences were observed for oil absorption capacities of bean flours, which ranged from 1.23 g/g for small red kidney bean flour to 1.52 g/g for red kidney bean flour. The bean flours emulsion capacity and stability and foaming capacity and stability also varied significantly and was variety-dependent. The highest apparent viscosity, 0.462 Pa.s, was recorded for small red kidney bean flour whereas black bean flour exhibited the lowest value of 0.073 Pa.s at 30 g/100 ml water content in the flour dispersions. The force-deformation curves for doughs from different bean flours showed that black bean flour had the highest peak force or hardness value of 90.7 N followed by doughs from cranberry, small red kidney and red kidney bean flours. The results of this study offer useful data on bean flours' potential uses in different food products.     

Physico-chemical and sensory quality of extruded light red kidney bean (Phaseolus vulgaris L.) porridge

A laboratory co-rotating twin-screw extruder was used to study the effect of extrusion conditions on physical, chemical, and sensory characteristics of extruded light red kidney beans (Phaseolus vulgaris L). Raw bean flour was extruded at 25 g/100g and 36 g/100g moisture content. Other extrusion parameters were: barrel temperatures, 120 °C/105 °C (BT-1) and 130/115 °C (BT-2); screw speeds, 118 rpm (SS-1), 194 rpm (SS-2), and 253 rpm (SS-3); and feed rates of 80 and 120 g/min (FR-1 and FR-2, respectively). Extrudates were analyzed for expansion ratio (ER), bulk density (BD), water absorption index (WAI), water solubility index (WSI), and lectins, as phytohemagglutinin (PHA) activity. Sensory evaluation of bean porridge, obtained after coarsely grinding extrudates, was done to compare it to Sosuma, a traditional Rwandan porridge. Feed rate significantly influenced average ER, which was determined to be 1.22 and 1.30 for FR-1 and FR-2, respectively. Increasing moisture content from 25 g/100g to 36 g/100g significantly increased average BD. The WAI and WSI values did not show a clear trend under extrusion conditions used in this study. For all extruded samples, lectin was reduced to less than one-tenth of that in the raw beans. Sensory evaluation of bean porridge, on a 1-9 hedonic scale (1 = dislike extremely and 9 = like extremely), exhibited scores of 7.65, 7.69, 6.25, and 6.94 for color, texture, flavor, and overall acceptability, respectively.     

Enzymatic hydrolysis of hemp (Cannabis sativa L.) protein isolate by various proteases and antioxidant properties of the resulting hydrolysates

Enzymatic hydrolysis of hemp protein isolate (HPI) by six proteases (alcalase, flavourzyme, neutrase, protamex, pepsin and trypsin) and antioxidant activities of the resulting hydrolysates, obtained for 2 and 4 h were investigated. The yield of trichloroacetic acid (TCA)-soluble peptides (Y_sp), protein composition and surface hydrophobicity (H_o) of the hydrolysates were evaluated. The results showed that the hydrolysates exhibited varying DPPH radical scavenging (with lowest IC₅₀, ∼2.3 mg/mL) and Fe²⁺⁺ chelating (with lowest IC₅₀ of 1.6–1.7 mg/mL) abilities and reducing power (with highest absorbance at 700 nm of 0.31–0.35), depending on their Y_sp and H_o values. The DPPH radical scavenging and Fe²⁺⁺ chelating abilities of the hydrolysates were positively correlated with their Y_sp or H_o values. The results suggest that enzymatic hydrolysis can be used as an effective technique to produce high value-added products of hemp proteins.     

Polyphenols and antioxidant capacity of Phaseolus vulgaris stored under extreme conditions and processed

Phaseolus vulgaris is a foodstuff that not only supplies nutrients, but also bioactive compounds with antioxidant capacity; however, bad post-harvest storage or processing can diminish the antioxidant capacity. In this work, the effect of storage under extreme conditions, of thermal processing and of fermentation on the content of phenolic compounds and their antioxidant capacity (AA) in beans of just harvested P. vulgaris were evaluated. Combination of temperatures of 30 and 50 °C and relative humidity of 11% and 80% for 150 days were evaluated. Extreme storage conditions drastically decreased the AA, demonstrating that post-harvest storage at low temperature and humidity preserves the antioxidant capacity of the beans. Regarding processing, cooking decreased the scavenging effect and the AA by 63.5% and 56.8%, while fermentation decreased them by only 14% and 22%, respectively. It was concluded that the loss of antioxidant capacity due to heating is less in fermented beans.     

Antioxidant and metal chelating activities of Phaseolus vulgaris L. var. Jamapa protein isolates, phaseolin and lectin hydrolysates

A search in a database of potential bioactive short sequences in food proteins reveals that bioactive peptides with a variety of beneficial effects for cardiovascular health are present in the sequence of common bean proteins, including bioactive sequences with antioxidant properties. A protein isolate, the storage protein phaseolin and a lectin extract from Phaseolus vulgaris L. var. Jamapa, were hydrolyzed by treatment with pepsin and pancreatin in order to investigate the possible release of peptides with antioxidant and metal chelating properties. Antioxidant activity was determined in Caco-2 cells exposed to a free radical generator, and iron and copper chelating activities were determined using colorimetric methods. The highest antioxidant activity, 71% inhibition, was found in the hydrolyzed protein isolate. Copper and iron chelating activities were highest in the lectin and phaseolin hydrolysates, 53% and 81%, respectively. Thus, experimental data indicates, as suggested by the database search, that antioxidant peptides are abundant in pepsin-pancreatin hydrolysates, which may represent a valuable health-promoting property in common bean.     

Microencapsulation properties of protein isolates from three selected Phaseolus legumes in comparison with soy protein isolate

The spray-drying microencapsulation properties of protein isolates from three selected Phaseolus legumes (kidney, red and mung beans; KPI, RPI and MPI), at a specific concentration (6 g/100 mL) and oil/protein ratio (1:1, w/w) were compared with soy protein isolate (SPI). The oil retention efficiency (RE), redispersion and dissolution behavior, as well as microstructure of the spray-dried powders were characterized. The influence of storage at 75% relative humidity for 7 days on these characteristics was also evaluated. The results indicated that the microencapsulation properties (except RE in the KPI case) of the three protein isolates were considerably poorer than SPI, though their emulsifying ability was even superior. The microencapsulating properties of these protein isolates were largely associated with their interfacial properties, especially the interfacial protein concentration. Among the three protein isolates, the spray-dried powders with KPI exhibited highest RE but least redispersion and/or dissolution behavior. The storage resulted in a severe loss of RE and ability to be redispersed and/or dissoluted, with much higher extent observed for the KPI powder. These results suggest that appropriate modifications, especially in interfacial properties, should be conducted on these proteins to warrant their application as wall materials in spray-drying microencapsulation.