Effects of 160 MeV Ni ion irradiation on polypyrrole conducting polymer electrode materials for all polymer redox supercapacitor

Electronically conducting polymers are suitable electrode materials for high performance supercapacitors, for their high specific capacitance and high dc conductivity in the charged state. Supercapacitors and batteries are energy storage and conversion systems which satisfies the requirements of high specific power and energy in a complementary way. Ion beam {energy > 1 MeV} irradiation on the polymer is a novel technique to enhance or alter the properties like conductivity, density, chain length and solubility.

Conducting polymer polypyrrole thin films doped with LiClO₄ are synthesized electrochemically on ITO coated glass substrate and are irradiated with 160 MeV Ni¹²⁺ ions at different fluence 5 × 10¹⁰, 5 × 10¹¹ and 3 × 10¹² ions cm⁻². Dc conductivity measurement of the irradiated films showed 50–60% increase in conductivity which is may be due to increase of carrier concentration in the polymer film as observed in UV–Vis spectroscopy and other effects like cross-linking of polymer chain, bond breaking and creation of defects sites. X-ray diffractogram study shows that the degree of crystallinity of polypyrrole increases in SHI irradiation and is proportionate to ion fluence. The capacitance of the irradiated films is lowered but the capacitance of the supercapacitors with irradiated films showed enhanced stability compared to the devices with unirradiated films while characterized for cycle life up to 10,000 cycles.     

Photoluminescence of Au formed in 12CaO · 7Al2O3 single crystal by Au-implantation

Au⁺ ion implantation with fluences from 1 × 10¹⁴ to 3 × 10¹⁶ cm⁻² into 12CaO · 7Al₂O₃ (C12A7) single crystals was carried out at a sample temperature of 600 °C. The implanted sample with the fluence of 1 × 10¹⁵ cm⁻² exhibited photoluminescence (PL) bands peaking at 3.1 and 2.3 eV at 150 K when excited by He–Cd laser (325 nm). This was the first observation of PL from C12A7. These two PL bands are possibly due to intra-ionic transitions of an Au⁻ ion having the electronic configuration of 6s², judged from their similarities to those reported on Au⁻ ions in alkali halides. However, when the concentration of the implanted Au ions exceeded the theoretical maximum value of anions encaged in C12A7 (2.3 × 10²¹ cm⁻³), surface plasmon absorption appeared in the optical absorption spectrum, suggesting Au colloids were formed at such high fluences. These observations indicate that negative gold ions are formed in the cages of C12A7 by the Au⁺ implantation if an appropriate fluence is chosen.     

Optical absorption of metallic Zn nanoparticles in Zn ion implanted sapphire

Zn⁺ ion implantation (48 keV) was performed at room temperature up to a fluence of 5 × 10¹⁷ cm⁻² in -Al₂O₃ single crystals. X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM) and optical absorption spectroscopy were utilized to characterize the optical properties, chemical charge states and the microstructure of embedded metallic Zn nanoparticles, respectively. XPS analysis indicated that implanted Zn ions are in the charge state of metallic Zn⁰. TEM analysis revealed the metallic Zn nanoparticles of 3–10 nm in the as-implanted sample at a fluence of 1 × 10¹⁷ cm⁻². A selected area electron diffraction (SAD) pattern indicates the random orientation of the Zn nanoparticles. A clear absorption peak appeared gradually in the optical absorption spectra of the as-implanted crystals, due to surface plasma resonance (SPR) of Zn nanoparticles. The wavelength of the absorption peak shifted from 260 nm to 285 nm with the increasing ion fluence, ascribed to the growth of Zn nanoparticles.     

Surface morphology of the Ar ion-irradiated Ag/Si(1 1 1) system

In the present study, a 500 Å thin Ag film was deposited by thermal evaporation on 5% HF etched Si(1 1 1) substrate at a chamber pressure of 8×10⁻⁶ mbar. The films were irradiated with 100 keV Ar⁺ ions at room temperature (RT) and at elevated temperatures to a fluence of 1×10¹⁶ cm⁻² at a flux of 5.55×10¹² ions/cm²/s. Surface morphology of the Ar ion-irradiated Ag/Si(1 1 1) system was investigated using scanning electron microscopy (SEM). A percolation network pattern was observed when the film was irradiated at 200°C and 400°C. The fractal dimension of the percolated pattern was higher in the sample irradiated at 400°C compared to the one irradiated at 200°C. The percolation network is still observed in the film thermally annealed at 600°C with and without prior ion irradiation. The fractal dimension of the percolated pattern in the sample annealed at 600°C was lower than in the sample post-annealed (irradiated and then annealed) at 600°C. All these observations are explained in terms of self-diffusion of Ag atoms on the Si(1 1 1) substrate, inter-diffusion of Ag and Si and phase formations in Ag and Si due to Ar ion irradiation.     

Release of nitrogen from SiOxNy films during RBS measurement

We have found that nitrogen atoms are released very rapidly from ultrathin SiO_xN_y films (2.6 nm) during RBS measurement with 500 keV He⁺ ions. The release behavior strongly depends on the preparation technique of the SiO_xN_y films. There is no release from the film prepared by thermal nitridation of SiO₂, while 80% of the nitrogen atoms are released from the film prepared by plasma nitridation at a fluence of 1×10¹⁶ cm⁻². The release cross-section for plasma SiO_xN_y films is of the order of 10⁻¹⁶ cm². This large cross-section cannot be explained by a simple recoil mechanism. The nitrogen release is also observed under irradiation with 5–10 keV electrons though the cross-section is of the order of 10⁻¹⁹ cm². These findings suggest that the observed nitrogen release is an electronic excitation induced process.     

Ion beam enhanced etching of LiNbO3

Single crystals of z- and x-cut LiNbO₃ were irradiated at room temperature and 15 K using He⁺- and Ar⁺-ions with energies of 40 and 350 keV and ion fluences between 5 × 10¹² and 5 × 10¹⁶ cm⁻². The damage formation investigated with Rutherford backscattering spectrometry (RBS) channeling analysis depends on the irradiation temperature as well as the ion species. For instance, He⁺-irradiation of z-cut material at 300 K provokes complete amorphization at 2.0 dpa (displacements per target atom). In contrast, 0.4 dpa is sufficient to amorphize the LiNbO₃ in the case of Ar⁺-irradiation. Irradiation at 15 K reduces the number of displacements per atom necessary for amorphization. To study the etching behavior, 400 nm thick amorphous layers were generated via multiple irradiation with He⁺- and Ar⁺-ions of different energies and fluences. Etching was performed in a 3.6% hydrofluoric (HF) solution at 40 °C. Although the etching rate of the perfect crystal is negligible, that of the amorphized regions amounts to 80 nm min⁻¹. The influence of the ion species, the fluence, the irradiation temperature and subsequent thermal treatment on damage and etching of LiNbO₃ are discussed.     

Large conductivity enhancement in polycrystalline 12CaO · 7Al2O3 thin films induced by extrusion of clathrated O ions by hot Au implantation and ultraviolet light illumination

Large enhancement in electrical conductivity from <10⁻¹⁰ S cm⁻¹ to 4 × 10⁻² S cm⁻¹ was achieved in polycrystalline 12CaO · 7Al₂O₃ (p-C12A7) thin films by hot Au⁺ implantation at 600 °C and subsequent ultraviolet (UV) light illumination. Although the as-implanted films were transparent and insulating, the subsequent UV-light illumination induced persistent electronic conduction and coloration. A good correlation was found between the concentration of photo-induced F⁺-like centers (a cage trapping an electron) and calculated displacements per atom, indicating that the hot Au⁺ implantation extruded free O²⁻ ions from the cages in the p-C12A7 films by kick-out effects and left electrons in the cages. These results suggest that H⁻ ions are formed by the Au⁺ implantation through the decomposition of preexisting OH⁻ ions. Subsequent UV-light illumination produced F⁺-like centers via photoionization of the H⁻ ions, which leads to the electronic conduction and coloration.     

Optical and structural behaviour of Mn implanted sapphire

Sapphire single crystals were implanted at room temperature with 180 keV manganese ions to fluences up to 1.8 × 10¹⁷ cm⁻². The samples were annealed at 1000 °C in oxidizing or reducing atmosphere. Surface damage was observed after implantation of low fluences, the amorphous phase being observed after implantation of 5 × 10¹⁶ cm⁻², as seen by Rutherford backscattering spectroscopy under channelling conditions. Thermal treatments in air annealed most of the implantation related defects and promoted the redistribution of the manganese ions, in a mixed oxide phase. X-ray diffraction studies revealed the presence of MnAl₂O₄. On the contrary, similar heat treatments in vacuum led to enhanced out diffusion of Mn while the matrix remained highly damaged. The analysis of laser induced luminescence performed after implantation showed the presence of an intense red emission.     

Vacancy defects induced in the track region of 132 MeV C irradiated SiC

Positron annihilation lifetime spectroscopy (PALS) and electron paramagnetic resonance (EPR) have been used in this work to investigate vacancy defects induced in the track region of 132 MeV ¹²C irradiated silicon carbide. Irradiations have been performed at room temperature at a fluence of 2.5 × 10¹⁴ cm⁻² in N-low doped 6H–SiC and 3C–SiC monocrystals. Silicon monovacancies have been detected in both polytypes using EPR. Their charge state and concentration have been determined in the track and cascade region of the C⁺ ions. PALS measurements performed as a function of temperature have shown the presence of V_Si–C divacancies in the track region for both polytypes.     

Heavy ion irradiation effects in the rare-earth sesquioxide Dy2O3

Polycrystalline pellets of the rare-earth sesquioxide Dy₂O₃ with cubic C-type rare-earth structure were irradiated with 300 keV Kr²⁺ ions at fluences up to 5 × 10²⁰ Kr/m² at cryogenic temperature. Irradiation-induced microstructural evolution is characterized using grazing incidence X-ray diffraction (GIXRD) and transmission electron microscopy (TEM). In previous work, we found a phase transformation from a cubic, C-type to a monoclinic, B-type (C2/m) rare-earth structure in Dy₂O₃ during Kr²⁺ ion irradiation at a fluence of less than 1 × 10²⁰ Kr/m². In this study, we find that the crystal structure of the top and middle regions of the implanted layer transform to a hexagonal, H-type (P6₃/mmc) rare-earth structure when the irradiation fluence is increased to 5 × 10²⁰ Kr/m²; the bottom of the implanted layer, on the other hand, remains in a monoclinic phase. The irradiation dose dependence of the C-to-B-to-H phase transformation observed in Dy₂O₃ appears to be closely related to the temperature and pressure dependence of the phases observed in the phase diagram. These transformations are also accompanied by a decrease in molecular volume (or density increase) of approximately 9% and 8%, respectively, which is an unusual radiation damage behavior.     

Structural characterization of amorphous Fe–Si and its recrystallized layers

We have synthesized amorphous Fe–Si thin layers and investigated their microstructure using transmission electron microscopy (TEM). Si single crystals with (1 1 1) orientation were irradiated with 120 keV Fe⁺ ions to a fluence of 4.0 × 10¹⁷ cm⁻² at cryogenic temperature (120 K), followed by thermal annealing at 1073 K for 2 h. A continuous amorphous layer with a bilayered structure was formed on the topmost layer of the Si substrate in the as-implanted specimen: the upper layer was an amorphous Fe–Si, while the lower one was an amorphous Si. After annealing, the amorphous bilayer crystallized into a continuous β-FeSi₂ thin layer.     

Helium retention of vanadium alloy after energetic helium ion irradiation

Helium irradiation experiments of V–4Ti alloy were conducted in an ECR ion irradiation apparatus by using helium ions with energy of 5 keV. The ion fluence was in the range from 1 × 10¹⁷ He/cm² to 8 × 10¹⁷ He/cm². After the helium ion irradiation, the helium retention was examined by using a technique of thermal desorption spectroscopy (TDS). After the irradiation, the blisters with a size of about 0.1 μm were observed at the surface, and the blister density increased with the ion fluence. Two desorption peaks were observed at approximately 500 and 1200 K in the thermal desorption spectrum. When the ion fluence was low, the retained helium desorbed mainly at the higher temperature regime. As increase of the ion fluence, the desorption at the lower temperature peak increased and the retained amount of helium saturated. The saturated amount was approximately 2.5 × 10¹⁷ He/cm². This value was comparable with those of the other plasma facing materials such as graphite.     

Magnetic force microscopy studies on the magnetic ordering in organic materials induced by high-energy proton irradiation

In this study, ferromagnetic microstructures in highly oriented pyrolytic graphite and superparamagnetic spots in polyimide foils were created by 2.25 MeV proton microbeam irradiation and characterized using atomic and magnetic force microscopy. For this purpose, graphite samples were irradiated with cross-like patterns of 15 μm × 15 μm size using ion fluences in the range of (0.003–2.5) × 10¹⁸ cm⁻². The irradiated crosses showed strong magnetic signals and a complex domain structure in the magnetic images depending on the geometrical dimensions of the crosses. Furthermore, polyimide foils were irradiated with microspots and fluences in the range of (0.016–3.1) × 10¹⁹ cm⁻². Magnetic force microscopy shows very strong phase shifts in these irradiated areas.     

Structural evolution in Fe ion implanted Si upon thermal annealing

We have performed high-dose Fe ion implantation into Si and characterized ion-beam-induced microstructures as well as annealing-induced ones using transmission electron microscopy (TEM) and grazing-incidence X-ray diffraction (GIXRD). Single crystals of Si(1 0 0) substrate were irradiated at 623 K with 120 keV Fe⁺ ions to a fluence of 4 × 10¹⁷ cm⁻². The irradiated samples were then annealed in a vacuum furnace at temperatures ranging from 773 K to 1073 K. Cross-sectional TEM observations and GIXRD measurements revealed that a layered structure is formed in the as-implanted specimen with ε-FeSi, β-FeSi₂ and damaged Si, as component layers. A continuous β-FeSi₂ layer was formed on the topmost layer of the Si substrate after thermal annealing.     

Ion implantation doping and electrical conductivity enhancement of C60 films

Pristine C₆₀ films sublimed onto sheet mica were implanted with 20 keV K⁺ ions and I⁺ ions at doses of 1.0 × 10¹⁶/cm², 3.0 × 10¹⁶/cm² and 5.0 × 10¹⁶/cm², and with 20 keV Ar⁺ ions at a dose of 5.0 × 10¹⁶/cm². The distributions of dopants were studied using Rutherford backscattering spectrometry (RBS). The temperature dependence of sheet resistivity of the films was investigated applying a four-probe system. It was proposed that the conductivity enhancement of K⁺ implanted C₆₀ films was due to the implanted ions in the films, while for I⁺ implanted C₆₀ films, both implanted I⁺ ions and irradiation effects of the ions contributed to the enhancement of conductivity.     

A study of the blue photoluminescence emission from thermally-grown, Si-implanted SiO2 films after short-time annealing

Thermal SiO₂ films have been implanted with Si⁺ ions using double-energy implants (200 + 100 keV) at a substrate temperature of about −20°C to total doses in the range 1.6 × 10¹⁶−1.6 × 10¹⁷ cm⁻² followed by short-time thermal processing, in order to form a Si nanostructure capable of yielding blue photoluminescence (PL). The intensity and the peak position of the PL band have been investigated as a function of ion dose, manner of heat treatment, anneal time and anneal temperature. For the formation of blue PL emitting centres, optimum processing conditions in terms of excess Si concentration and overall thermal budget are mandatory. The nature of the observed blue emission is discussed.     

Radiation damage induced by 5 keV Si ion implantation in strained-Si/Si0.8Ge0.2

The damage distributions induced by ultra low energy ion implantation (5 keV Si⁺) in both strained-Si/Si_0.8Ge_0.2 and normal Si are measured using high-resolution RBS/channeling with a depth resolution better than 1 nm. Ion implantation was performed at room temperature over the fluence range from 2 × 10¹³ to 1 × 10¹⁵ ions/cm². Our HRBS results show that the radiation damage induced in the strained Si is slightly larger than that in the normal Si at fluences from 1 × 10¹⁴ to 4 × 10¹⁴ ions/cm² while the amorphous width is almost the same in both strained and normal Si.     

Radiation effects on MgAl2O4–yttria stabilized ZrO2 composite material irradiated with Ne ions at high temperatures

Spinel (MgAl₂O₄) and yttria stabilized ZrO₂ (YSZ) are candidates for fuel materials for use in nuclear reactors and the optical and insulating materials for fusion reactors. In our previous studies, the amorphization of spinel under 60 keV Xe ion irradiation at RT was observed. On the other hand, amorphization could not be confirmed in YSZ single crystals under the same irradiation conditions. In the present study, the damage evolution process of polycrystalline spinel–YSZ composite materials has been studied by in situ TEM observation during ion irradiation. The irradiation was performed with 30 keV Ne⁺ ions at a flux of 5 × 10¹³ ions cm⁻² s⁻¹ at 923 K and 1473 K, respectively. The observed results revealed a clear difference in morphology of damage depending on irradiation temperature and crystal grains. In the irradiation at 923 K, defect clusters and bubbles were formed homogeneously in YSZ grains. On the other hand, at 1473 K, only bubble formation was observed. The bubbles grew remarkably with increasing ion fluence in both grains. Even though the growth of the bubbles was observed in both grains, the average diameter of grown bubbles in spinel grains was larger than those in YSZ ones. The bubbles tended to form along the grain boundary at both temperatures.     

Pumping experiment of water on B and LaB6 films with an electron beam evaporator

The pumping characteristic of water vapor on boron and lanthanum hexaboride films formed with an electron beam evaporator have been investigated in high vacuum between 10⁻⁴ and 10⁻³ Pa. The measured initial maximum pumping speeds of water for the fresh B or LaB₆ films with a deposition amount from 2.3 × 10²¹ to 6.7× 10²¹ molecules/m² separately formed on a substrate are 3.2–4.9 m³/sm², and the saturation values of adsorbed water on these films are 2.1 ×10²⁰−1.3 × 10²¹ H₂O molecules/m².     

Ion beam synthesis and recrystallization of amorphous SiGe/SiC structures

Si_1−xGe_x amorphous layers implanted with different doses of carbon (between 5 × 10¹⁵ and 2 × 10¹⁷ cm⁻² and annealed at 700°C and 900°C have been analyzed by Raman and Infrared spectroscopies, electron microscopy and Auger electron spectroscopy. The obtained data show the synthesis of amorphous SiC by implanting at the highest doses. In these cases, recrystallization only occurs at the highest annealing temperature (900°C). The structure of the synthesized SiC strongly depends on the implantation dose, in addition to the anneal temperature. For the highest dose (2 × 10¹⁷ cm⁻²), crystalline β-SiC is formed. Finally, a strong migration of Ge towards the Si substrate is observed from the region where SiC precipitation occurs.