Soil moisture mapping and AMSR-E validation using the PSR in SMEX02

Field experiments (SMEX02) were conducted to evaluate the effects of dense agricultural crop conditions on soil moisture retrieval using passive microwave remote sensing. Aircraft observations were collected using a new version of the Polarimetric Scanning Radiometer (PSR) that provided four C band and four X band frequencies. Observations were also available from the Aqua satellite Advanced Microwave Scanning Radiometer (AMSR-E) at these same frequencies. SMEX02 was conducted over a three-week period during the summer near Ames, Iowa. Corn and soybeans dominate the region. During the study period the corn was approaching its peak water content state and the soybeans were at the mid point of the growth cycle. Aircraft observations are compared to ground observations. Subsequently models are developed to describe the effects of corn and soybeans on soil moisture retrieval. Multiple altitude aircraft brightness temperatures were compared to AMSR-E observations to understand brightness temperature scaling and provide validation. The X-band observations from the two sensors were in reasonable agreement. The AMSR-E C-band observations were contaminated with anthropogenic RFI, which made comparison to the PSR invalid. Aircraft data along with ancillary data were used in a retrieval algorithm to map soil moisture. The PSR estimated soil moisture retrievals on a field-by-field comparison had a standard error of estimate (SEE) of 5.5%. The error reduced when high altitude soil moisture estimates were aggregated to 25 km resolution (same as AMSR-E EASE grid product resolution) (SEE ∼ 2.85%). These soil moisture products provide a validation of the AMSR retrievals. PSR/CX soil moisture images show spatial and temporal patterns consistent with meteorological and soil conditions. The dynamic range of the PSR/CX observations indicates that reasonable soil moisture estimates can be obtained from AMSR, even in areas of high vegetation biomass content (∼ 4-8 kg/m2).     

Spatial sampling uncertainty in SMEX04 soil moisture fields: A data-based resampling experiment

A data-based resampling experiment is performed to estimate sampling errors of area-averaged soil moisture estimates due to spatial sampling by ground-based sensors. The data consists of high-resolution soil moisture images derived from the Polarimetric Scanning Radiometer (PSR/CX) sensor flown on an aircraft as part of the summer field experiment (SMEX04 — Soil Moisture Experiment 2004) in the monsoon region of Sonora, Mexico. The sampling characteristics are investigated by accounting for random networks and evenly spaced networks. For random network designs, we develop a simple model that can be used to estimate the sampling uncertainty (expressed as standard deviation of sampling error as a percentage of the areal mean soil moisture) as a function of the number of sensors, mean soil moisture content and averaging area. This model is valid for five or more sensors. The model should prove useful to those wishing to assess the area-averaged performance of a soil moisture network. Furthermore, the method of analysis is applicable to other study regions (Oklahoma, Iowa, Alabama, Georgia, and Arizona) where soil moisture fields have been mapped at high resolution using airborne passive microwave remote sensors.     

Modeling and assimilation of root zone soil moisture using remote sensing observations in Walnut Gulch Watershed during SMEX04

Soil moisture status in the root zone is an important component of the water cycle at all spatial scales (e.g., point, field, catchment, watershed, and region). In this study, the spatio-temporal evolution of root zone soil moisture of the Walnut Gulch Experimental Watershed (WGEW) in Arizona was investigated during the Soil Moisture Experiment 2004 (SMEX04). Root zone soil moisture was estimated via assimilation of aircraft-based remotely sensed surface soil moisture into a distributed Soil-Water-Atmosphere-Plant (SWAP) model. An ensemble square root filter (EnSRF) based on a Kalman filtering scheme was used for assimilating the aircraft-based soil moisture observations at a spatial resolution of 800 m × 800 m. The SWAP model inputs were derived from the SSURGO soil database, LAI (Leaf Area Index) data from SMEX04 database, and data from meteorological stations/rain gauges at the WGEW. Model predictions are presented in terms of temporal evolution of soil moisture probability density function at various depths across the WGEW. The assimilation of the remotely sensed surface soil moisture observations had limited influence on the profile soil moisture. More specifically, root zone soil moisture depended mostly on the soil type. Modeled soil moisture profile estimates were compared to field measurements made periodically during the experiment at the ground based soil moisture stations in the watershed. Comparisons showed that the ground-based soil moisture observations at various depths were within ± 1 standard deviation of the modeled profile soil moisture. Density plots of root zone soil moisture at various depths in the WGEW exhibited multi-modal variations due to the uneven distribution of precipitation and the heterogeneity of soil types and soil layers across the watershed.     

Temporal dynamics of PSR-based soil moisture across spatial scales in an agricultural landscape during SMEX02: A wavelet approach

In this study, we examined the characteristics of soil moisture dynamics of wet and dry fields across hierarchical spatial scales within the region of Soil Moisture Experiment 2002 (SMEX02) hydrology campaign in Iowa. The Polarimetric Scanning Radiometer (PSR)-based remotely sensed surface (∼ 0-5 cm) soil moisture at 800 m × 800 m resolution was used in this study. Wavelet-based multiresolution technique decomposed the soil moisture into large-scale mean soil moisture fields and fluctuations in horizontal, diagonal, and vertical directions at hierarchical spatial resolutions. Results suggested linearity in the log-log dependency of the variance of soil moisture up to a resolution of 6400 m × 6400 m on PSR sampling dates during SMEX02. The wet fields (with high soil moisture) show almost similar variance for all the resolutions signifying the strong spatial correlation. Analysis of the dry fields (with low soil moisture) indicated a log-log linearity of moments with various scales, and the slopes of these relationships exhibit a concave functional form with the order of moments, typically representing a multiscaling process. The scaling exponent of soil moisture during dry-down suggests a transition from simple scaling (in wet fields) to multiscaling (in dry fields) behavior. The fluctuation components of multiresolution analysis in the horizontal, diagonal, and vertical directions for dry and wet fields exhibited self-similarity. Another important finding of this study is the increase of subpixel soil moisture variability with increasing resolution, especially for the wet fields. These findings will help develop appropriate up-and down-scaling schemes of remotely sensed soil moisture data for various hydrologic and environmental modeling applications.     

Soil moisture retrievals at L-band using a two-step inversion approach (COSMOS/NAFE'05 Experiment)

COSMOS (Campaign for validating the Operation of Soil Moisture and Ocean Salinity), and NAFE (National Airborne Field Experiment) were two airborne campaigns held in the Goulburn River catchment (Australia) at the end of 2005. These airborne measurements are being used as benchmark data sets for validating the SMOS (Soil Moisture and Ocean Salinity) ground segment processor over prairies and crops. This paper presents results of soil moisture inversions and brightness temperature simulations at different resolutions from dual-polarisation and multi-angular L-band (1.4 GHz) measurements obtained from two independent radiometers. The aim of the paper is to provide a method that could overcome the limitations of unknown surface roughness for soil moisture retrievals from L-band data. For that purpose, a two-step approach is proposed for areas with low to moderate vegetation. Firstly, a two-parameter inversion of surface roughness and optical depth is used to obtain a roughness correction dependent on land use only. This step is conducted over small areas with known soil moisture. Such roughness correction is then used in the second step, where soil moisture and optical depth are retrieved over larger areas including mixed pixels. This approach produces soil moisture retrievals with root mean square errors between 0.034 m³ m^− 3 and 0.054 m³ m^− 3 over crops, prairies, and mixtures of these two land uses at different resolutions.     

Effect of remote sensing spatial resolution on interpreting tower-based flux observations

Validation comparisons between satellite-based surface energy balance models and tower-based flux measurements over heterogeneous landscapes can be strongly influenced by the spatial resolution of the remote sensing inputs. In this paper, a two-source energy balance model developed to use thermal and visible /near-infrared remotely sensed data is applied to Landsat imagery collected during the 2004 Soil Moisture Experiment (SMEX04) conducted in southern Arizona. Using a two dimensional flux-footprint algorithm, modeled surface fluxes are compared to tower measurements at three locations in the SMEX04 study area: two upland sites, and one riparian site. The effect of pixel resolution on evaluating the performance of the land surface model and interpreting spatial variations of land surface fluxes over these heterogeneous areas is evaluated. Three Landsat scenes were examined, one representing the dry season and the other two representing the relatively wet monsoon season. The model was run at three resolution scales: namely the Landsat visible/near-infrared band resolution (30 m), the Landsat 5 thermal band resolution (120 m), and 960 m, which is nominally the MODIS thermal resolution at near-nadir. Comparisons between modeled and measured fluxes at the three tower sites showed good agreement at the 30 m and 120 m resolutions — pixel scales at which the source area influencing the tower measurement (∼ 100 m) is reasonably resolved. At 960 m, the agreement is relatively poor, especially for the latent heat flux, due to sub-pixel heterogeneity in land surface conditions at scales exceeding the tower footprint. Therefore in this particular landscape, thermal data at 1-km resolution are not useful in assessing the intrinsic accuracy of the land-surface model in comparison with tower fluxes. Furthermore, important spatial patterns in the landscape are lost at this resolution. Currently, there are no definite plans supporting high resolution thermal data with regular global coverage below ∼ 700 m after Landsat 5 and ASTER fail. This will be a serious problem for the application and validation of thermal-based land-surface models over heterogeneous landscapes.     

Comparing the utility of microwave and thermal remote-sensing constraints in two-source energy balance modeling over an agricultural landscape

A two-source (soil + vegetation) energy balance model using microwave-derived near-surface soil moisture as a key boundary condition (TSM_SM) and another scheme using thermal-infrared (radiometric) surface temperature (TSM_TH) were applied to remote sensing data collected over a corn and soybean production region in central Iowa during the Soil Moisture Atmosphere Coupling Experiment (SMACEX)/Soil Moisture Experiment of 2002 (SMEX02). The TSM_SM was run using fields of near-surface soil moisture from microwave imagery collected by aircraft on six days during the experiment, yielding a root mean square difference (RMSD) between model estimates and tower measurements of net radiation (Rn) and soil heat flux (G) of approximately 20 W m^− 2, and 45 W m^− 2 for sensible (H) and latent heating (LE). Similar results for H and LE were obtained at landscape/regional scales when comparing model output with transect-average aircraft flux measurements. Flux predictions from the TSM_SM and TSM_TH models were compared for two days when both airborne microwave-derived soil moisture and radiometric surface temperature (T_R) data from Landsat were available. These two days represented contrasting conditions of moderate crop cover/dry soil surface and dense crop cover/moist soil surface. Surface temperature diagnosed by the TSM_SM was also compared directly to the remotely sensed T_R fields as an additional means of model validation. The TSM_SM performed well under moderate crop cover/dry soil surface conditions, but yielded larger discrepancies with observed heat fluxes and T_R under the high crop cover/moist soil surface conditions. Flux predictions from the thermal-based two-source model typically showed biases of opposite sign, suggesting that an average of the flux output from both modeling schemes may improve overall accuracy in flux predictions, in effect incorporating multiple remote-sensing constraints on canopy and soil fluxes.     

Vegetation water content during SMEX04 from ground data and Landsat 5 Thematic Mapper imagery

Vegetation water content is an important parameter for retrieval of soil moisture from microwave data and for other remote sensing applications. Because liquid water absorbs in the shortwave infrared, the normalized difference infrared index (NDII), calculated from Landsat 5 Thematic Mapper band 4 (0.76-0.90 μm wavelength) and band 5 (1.55-1.65 μm wavelength), can be used to determine canopy equivalent water thickness (EWT), which is defined as the water volume per leaf area times the leaf area index (LAI). Alternatively, average canopy EWT can be determined using a landcover classification, because different vegetation types have different average LAI at the peak of the growing season. The primary contribution of this study for the Soil Moisture Experiment 2004 was to sample vegetation for the Arizona and Sonora study areas. Vegetation was sampled to achieve a range of canopy EWT; LAI was measured using a plant canopy analyzer and digital hemispherical (fisheye) photographs. NDII was linearly related to measured canopy EWT with an R² of 0.601. Landcover of the Arizona, USA, and Sonora, Mexico, study areas were classified with an overall accuracy of 70% using a rule-based decision tree using three dates of Landsat 5 Thematic Mapper imagery and digital elevation data. There was a large range of NDII per landcover class at the peak of the growing season, indicating that canopy EWT should be estimated directly using NDII or other shortwave-infrared vegetation indices. However, landcover classifications will still be necessary to obtain total vegetation water content from canopy EWT and other data, because considerable liquid water is contained in the non-foliar components of vegetation.     

Retrieval of soil moisture from passive and active L/S band sensor (PALS) observations during the Soil Moisture Experiment in 2002 (SMEX02)

The Soil Moisture Experiments in 2002 (SMEX02) were conducted in Iowa between June 25th and July 12th, 2002. A major aim of the experiments was examination of existing algorithms for soil moisture retrieval from active and passive microwave remote sensors under high vegetation water content conditions. The data obtained from the passive and active L and S band sensor (PALS) along with physical variables measured by in situ sampling have been used in this study to demonstrate the sensitivity of the instrument to soil moisture and perform soil moisture retrieval using statistical regression and physical modeling techniques. The land cover conditions in the region studied were predominantly soybean and corn crops with average vegetation water contents ranging from 0 to ∼5 kg/m². The PALS microwave sensitivity to soil moisture under these vegetation conditions was investigated for both passive and active measurements. The performance of the PALS instrument and retrieval algorithms has been analyzed, indicating soil moisture retrieval errors of approximately 0.04 g/g gravimetric soil moisture. Statistical regression techniques have been shown to perform satisfactorily with soil moisture retrieval error of around 0.05 g/g gravimetric soil moisture. The retrieval errors were higher for the corn than for the soybean fields due to the higher vegetation water content of the corn crops. However, the algorithms performed satisfactorily over the full range of vegetation conditions.     

Landslide susceptibility mapping using downscaled AMSR-E soil moisture: A case study from Cleveland Corral, California, US

As soil moisture increases, slope stability decreases. Remotely sensed soil moisture data can provide routine updates of slope conditions necessary for landslide predictions. For regional scale landslide investigations, only remote-sensing methods have the spatial and temporal resolution required to map hazard increases. Here, a dynamic physically-based slope stability model that requires soil moisture is applied using remote-sensing products from multiple Earth observing platforms. The resulting landslide susceptibility maps using the advanced microwave scanning radiometer (AMSR-E) surface soil moisture are compared to those created using variable infiltration capacity (VIC-3L) modeled soil moisture at Cleveland Corral landslide area in California, US. Despite snow cover influences on AMSR-E surface soil moisture estimates, a good relationship between the downscaled AMSR-E's surface soil moisture and the VIC-3L modeled soil moisture is evident. The AMSR-E soil moisture mean (0.17 cm³/cm³) and standard deviation (0.02 cm³/cm³) are very close to the mean (0.21 cm³/cm³) and standard deviation (0.09 cm³/cm³) estimated by VIC-3L model. Qualitative results show that the location and extent of landslide prone regions are quite similar. Under the maximum saturation scenario, 0.42% and 0.49% of the study area were highly susceptible using AMSR-E and VIC-3L model soil moisture, respectively.     

Temporal persistence and stability of surface soil moisture in a semi-arid watershed

Satellite soil moisture products, such as those from Advanced Microwave Scanning Radiometer (AMSR), require diverse landscapes for validation. Semi-arid landscapes present a particular challenge to satellite remote sensing validation using traditional techniques because of the high spatial variability and potentially rapid rates of temporal change in moisture conditions. In this study, temporal stability analysis and spatial sampling techniques are used to investigate the representativeness of ground observations at satellite scale soil moisture in a semi-arid watershed for a long study period (March 1, 2002 to September 13, 2005). The watershed utilized, the Walnut Gulch Experimental Watershed, has a dense network of 19 soil moisture sensors, distributed over a 150 km² study region. In conjunction with this monitoring network, intensive gravimetric soil moisture sampling conducted as part of the Soil Moisture Experiment in 2004 (SMEX04), contributed to the calibration of the network for large-scale estimation during the North American Monsoon System (NAMS). The sensor network is shown to be an excellent estimator of the watershed average with an accuracy of approximately 0.01 m³/m³ soil moisture. However, temporal stability analysis indicated that while much of the network is stable, the soil moisture spatial pattern, as represented by mean relative difference, is not replicated by the network mean relative difference pattern. Rather, the network is composed of statistical samples. Geophysical aspects of the watershed, including topography and soil type are also examined for their influence on the soil moisture variability and stability. Soil type, as characterized by bulk density, clay and sand content, was responsible for nearly 50% of the temporal stability. Topographic effects were less important in defining representativeness and stability.     

Enhancing a leaf radiative transfer model to estimate concentrations and in vivo specific absorption coefficients of total carotenoids and chlorophylls a and b from single-needle reflectance and transmittance

The relative concentrations of different pigments within a leaf have significant physiological and spectral consequences. Photosynthesis, light use efficiency, mass and energy exchange, and stress response are dependent on relationships among an ensemble of pigments. This ensemble also determines the visible characteristics of a leaf, which can be measured remotely and used to quantify leaf biochemistry and structure. But current remote sensing approaches are limited in their ability to resolve individual pigments. This paper focuses on the incorporation of three pigments—chlorophyll a, chlorophyll b, and total carotenoids—into the LIBERTY leaf radiative transfer model to better understand relationships between leaf biochemical, biophysical, and spectral properties.Pinus ponderosa and Pinus jeffreyi needles were collected from three sites in the California Sierra Nevada. Hemispheric single-leaf visible reflectance and transmittance and concentrations of chlorophylls a and b and total carotenoids of fresh needles were measured. These data were input to the enhanced LIBERTY model to estimate optical and biochemical properties of pine needles. The enhanced model successfully estimated reflectance (RMSE = 0.0255, BIAS = 0.00477, RMS%E = 16.7%), had variable success estimating transmittance (RMSE = 0.0442, BIAS = 0.0294, RMS%E = 181%), and generated very good estimates of carotenoid concentrations (RMSE = 2.48 µg/cm², BIAS = 0.143 µg/cm², RMS%E = 20.4%), good estimates of chlorophyll a concentrations (RMSE = 10.7 µg/cm², BIAS = − 0.992 µg/cm², RMS%E = 21.1%), and fair estimates of chlorophyll b concentrations (RMSE = 7.49 µg/cm², BIAS = − 2.12 µg/cm², RMS%E = 43.7%). Overall root mean squared errors of reflectance, transmittance, and pigment concentration estimates were lower for the three-pigment model than for the single-pigment model. The algorithm to estimate three in vivo specific absorption coefficients is robust, although estimated values are distorted by inconsistencies in model biophysics. The capacity to invert the model from single-leaf reflectance and transmittance was added to the model so it could be coupled with vegetation canopy models to estimate canopy biochemistry from remotely sensed data.     

Appropriate scale of soil moisture retrieval from high resolution radar imagery for bare and minimally vegetated soils

This research investigates the appropriate scale for watershed averaged and site specific soil moisture retrieval from high resolution radar imagery. The first approach involved filtering backscatter for input to a retrieval model that was compared against field measures of soil moisture. The second approach involved spatially averaging raw and filtered imagery in an image-based statistical technique to determine the best scale for site-specific soil moisture retrieval. Field soil moisture was measured at 1225 m² sites in three watersheds commensurate with 7 m resolution Radarsat image acquisition. Analysis of speckle reducing block median filters indicated that 5 × 5 filter level was the optimum for watershed averaged estimates of soil moisture. However, median filtering alone did not provide acceptable accuracy for soil moisture retrieval on a site-specific basis. Therefore, spatial averaging of unfiltered and median filtered power values was used to generate backscatter estimates with known confidence for soil moisture retrieval. This combined approach of filtering and averaging was demonstrated at watersheds located in Arizona (AZ), Oklahoma (OK) and Georgia (GA). The optimum ground resolution for AZ, OK and GA study areas was 162 m, 310 m, and 1131 m respectively obtained with unfiltered imagery. This statistical approach does not rely on ground verification of soil moisture for validation and only requires a satellite image and average roughness parameters of the site. When applied at other locations, the resulting optimum ground resolution will depend on the spatial distribution of land surface features that affect radar backscatter. This work offers insight into the accuracy of soil moisture retrieval, and an operational approach to determine the optimal spatial resolution for the required application accuracy.     

Effects of corn on C- and L-band radar backscatter: A correction method for soil moisture retrieval

This paper discusses the effects of vegetation on C- (4.75 GHz) and L- (1.6 GHz) band backscattering (σ^o) measured throughout a growth cycle at incidence angles of 15, 35 and 55°. The utilized σ^o data set was collected by a truck mounted scatterometer over a corn field and is supported by a comprehensive set of ground measurements, including soil moisture and vegetation biomass. Comparison of σ^o measurement against simulations by the Integral Equation Method (IEM) surface scattering model (Fung et al., 1992) shows that the σ^o measurements are dominated either by an attenuated soil return or by scattering from vegetation depending on the antenna configuration and growth stage. Further, the measured σ^o is found to be sensitive to soil moisture even at peak biomass and large incidence angles, which is attributed to scattering along the soil-vegetation pathway.For the simulation of C-band σ^o and the retrieval of soil moisture two methods have been applied, which are the semi-empirical water cloud model (Attema & Ulaby, 1978) and a novel method. This alternative method uses the empirical relationships between the vegetation water content (W) and the ratio of the bare soil and the measured σ^o to correct for vegetation. It is found that this alternative method is superior in reproducing the measured σ^o as well as retrieving soil moisture. The highest retrieval accuracies are obtained at a 35° incidence angle leading to RMSD's of 0.044 and 0.037 m³ m^− 3 for the HH and VV-polarization, respectively. In addition, the sensitivity of these soil moisture retrievals to W and surface roughness parameter uncertainties is investigated.     

Upscaling ground observations of vegetation water content, canopy height, and leaf area index during SMEX02 using aircraft and Landsat imagery

Microwave-based remote sensing algorithms for mapping soil moisture are sensitive to water contained in surface vegetation at moderate levels of canopy cover. Correction schemes require spatially distributed estimates of vegetation water content at scales comparable to that of the microwave sensor footprint (10¹ to 10⁴ m). This study compares the relative utility of high-resolution (1.5 m) aircraft and coarser-resolution (30 m) Landsat imagery in upscaling an extensive set of ground-based measurements of canopy biophysical properties collected during the Soil Moisture Experiment of 2002 (SMEX02) within the Walnut Creek Watershed. The upscaling was accomplished using expolinear relationships developed between spectral vegetation indices and measurements of leaf area index, canopy height, and vegetation water content. Of the various indices examined, a Normalized Difference Water Index (NDWI), derived from near- and shortwave-infrared reflectances, was found to be least susceptible to saturation at high levels of leaf area index. With the aircraft data set, which did not include a short-wave infrared water absorption band, the Optimized Soil Adjusted Vegetation Index (OSAVI) yielded best correlations with observations and highest saturation levels. At the observation scale (10 m), LAI was retrieved from both NDWI and OSAVI imagery with an accuracy of 0.6, vegetation water content at 0.7 kg m⁻², and canopy height to within 0.2 m. Both indices were used to estimate field-scale mean canopy properties and variability for each of the intensive soil-moisture-sampling sites within the watershed study area. Results regarding scale invariance over the SMEX02 study area in transformations from band reflectance and vegetation indices to canopy biophysical properties are also presented.     

Effects of soil moisture and water depth on ERS SAR backscatter measurements from an Alaskan wetland complex

We conducted a preliminary investigation of the response of ERS C-band SAR backscatter to variations in soil moisture and surface inundation in wetlands of interior Alaska. Data were collected from 5 wetlands over a three-week period in 2007. Results showed a positive correlation between backscatter and soil moisture in sites dominated by herbaceous vegetation cover (r = 0.74, p < 0.04). ERS SAR backscatter was negatively correlated to water depth in all open (non-forested) wetlands when water table levels were more than 6 cm above the wetland surface (r = − 0.82, p < 0.001). There was no relationship between backscatter and soil moisture in the forested (black spruce-dominated) wetland site. Our preliminary results show that ERS SAR data can be used to monitor variations in hydrologic conditions in high northern latitude wetlands (including peatlands), particularly sites with sparse tree cover.     

The SMOS Mediterranean Ecosystem L-Band characterisation EXperiment (MELBEX-I) over natural shrubs

In the framework of ESA's SMOS mission (Soil Moisture and Ocean Salinity), many studies have been carried out over different land surface types to model their microwave emission at L-band (1.4 GHz). Results of these studies have been integrated in the emission model L-MEB (L-Band Microwave Emission of the Biosphere), which is the core of the SMOS Level 2 soil moisture retrieval algorithm. The Mediterranean Ecosystem L-Band characterisation EXperiment (MELBEX-I) was carried out at the SMOS validation site near Valencia in autumn 2005. The main objective of MELBEX-I was to calibrate L-MEB over Mediterranean shrub land, as no data were available over this biome. For that purpose, multi-angular and dual polarimetric measurements (H, V) were obtained by the EMIRAD L-band radiometer from a 14-m tower. Results of this study indicate a small and constant impact of vegetation on the microwave emission of shrub land, and L-MEB parameters for shrub land were obtained. In addition, the study highlights the need for calibrating microwave soil roughness, which was found to be constant at the site. Depending on the number of retrieved parameters, soil moisture (SM) near the surface could be estimated with errors between 0.035 m³ m^− 3 (if only SM was retrieved) and 0.057 m³ m^− 3 (if SM, optical depth and a roughness parameter were simultaneously retrieved). Finally, no modelling improvements were observed when coarse estimates of the fraction of exposed rocks were accounted for in the model.     

Soil moisture estimation in a semiarid rangeland using ERS-2 and TM imagery

Soil moisture is important information in semiarid rangelands where vegetation growth is heavily dependent on the water availability. Although many studies have been conducted to estimate moisture in bare soil fields with Synthetic Aperture Radar (SAR) imagery, little success has been achieved in vegetated areas. The purpose of this study is to extract soil moisture in sparsely to moderately vegetated rangeland surfaces with ERS-2/TM synergy. We developed an approach to first reduce the surface roughness effect by using the temporal differential backscatter coefficient (Δσ_wet-dry⁰). Then an optical/microwave synergistic model was built to simulate the relationship among soil moisture, Normalized Difference Vegetation Index (NDVI) and Δσ_wet-dry⁰. With NDVI calculated from TM imagery in wet seasons and Δσ_wet-dry⁰ from ERS-2 imagery in wet and dry seasons, we derived the soil moisture maps over desert grass and shrub areas in wet seasons. The results showed that in the semiarid rangeland, radar backscatter was positively correlated to NDVI when soil was dry (m_v<10%), and negatively correlated to NDVI when soil moisture was higher (m_v>10%). The approach developed in this study is valid for sparse to moderate vegetated areas. When the vegetation density is higher (NDVI>0.45), the SAR backscatter is mainly from vegetation layer and therefore the soil moisture estimation is not possible in this study.     

Validation of AMSR-E soil moisture using L-band airborne radiometer data from National Airborne Field Experiment 2006

AMSR-E has been extensively evaluated under a wide range of ground and climate conditions using in situ and aircraft data, where the latter were primarily used for assessing the T_B calibration accuracy. However, none of the previous work evaluates AMSR-E performance under the conditions of flood irrigation or other forms of standing water. Also, it should be mentioned that global soil moisture retrievals from AMSR-E typically utilize X-band data. Here, C-band based AMSR-E soil moisture estimates are evaluated using 1 km resolution retrievals derived from L-band aircraft data collected during the National Airborne Field Experiment (NAFE'06) field campaign in November 2006. NAFE'06 was conducted in the Murrumbidgee catchment area in southeastern Australia, which offers diverse ground conditions, including extensive areas with dryland, irrigation, and rice fields. The data allowed us to examine the impact of irrigation and standing water on the accuracy of satellite-derived soil moisture estimates from AMSR-E using passive microwave remote sensing. It was expected that in fields with standing water, the satellite estimates would have a lower accuracy as compared to soil moisture values over the rest of the domain. Results showed sensitivity of the AMSR-E to changes in soil moisture caused by both precipitation and irrigation, as well as good spatial (average R = 0.92 and RMSD = 0.049 m³/m³) and temporal (R = 0.94 and RMSD = 0.04 m³/m³) agreement between the satellite and aircraft soil moisture retrievals; however, under the NAFE'06 ground conditions, the satellite retrievals consistently overestimated the soil moisture conditions compared to the aircraft.     

An improved algorithm for disaggregating microwave-derived soil moisture based on red, near-infrared and thermal-infrared data

Accurate high-resolution soil moisture data are needed for a range of agricultural and hydrologic activities. To improve the spatial resolution of ∼ 40 km resolution passive microwave-derived soil moisture, a methodology based on 1 km resolution MODIS (MODerate resolution Imaging Spectroradiometer) red, near-infrared and thermal-infrared data has been implemented at 4 km resolution. The three components of that method are (i) fractional vegetation cover, (ii) soil evaporative efficiency (defined as the ratio of actual to potential evaporation) and (iii) a downscaling relationship. In this paper, 36 different disaggregation algorithms are built from 3 fractional vegetation cover formulations, 3 soil evaporative efficiency models, and 4 downscaling relationships. All algorithms differ with regard to the representation of the nonlinear relationship between microwave-derived soil moisture and optical-derived soil evaporative efficiency. Airborne L-band data collected over an Australian agricultural area are used to both generate ∼ 40 km resolution microwave pixels and verify disaggregation results at 4 km resolution. Among the 36 disaggregation algorithms, one is identified as being more robust (insensitive to soil, vegetation and atmospheric variables) than the others with a mean slope between MODIS-disaggregated and L-band derived soil moisture of 0.94. The robustness of that algorithm is notably assessed by comparing the disaggregation results obtained using composited (averaged) Terra and Aqua MODIS data, and using data from Terra and Aqua separately. The error on disaggregated soil moisture is systematically reduced by compositing daily Terra and Aqua data with an error of 0.012 vol./vol.