共查询到20条相似文献,搜索用时 93 毫秒
1.
2.
3.
非晶合金具有比传统金属材料更加优异的性能。论述了制备非晶合金的两种主要方法:机械合金化法(MA)和快速凝固法(RSP)。分析了这两种制备方法本质上的区别。着重介绍了现阶段机械合金化生成非晶合金的4种主要理论模型:机械模型、原子模型、热力学模型、动力学模型,并指出这些模型的优缺点以及他们之间的关系。 相似文献
4.
机械合金化法制备Fe—Si纳米晶合金 总被引:9,自引:0,他引:9
研究了机械合金化法制备Fe-Si纳米晶合金,用X射线衍射仪、扫描电子显微镜和X射线能量色散谱仪对经不同机械合金化工艺条件处理的Fe33Si67混合粉末进行了分析,结果表明:Fe33Si67混合粉末球磨26h后可实现机械合金化。随着球磨持续进行,合金化的粉末和晶粒不断细化,最后可得到Fe-Si纳米晶合金。 相似文献
5.
比较了机械合金化法、溶胶-凝胶-等离子体烧结法和真空熔炼法三种方法制备的氧化物弥散强化低活化铁素体/马氏体钢的结构和性能。机械合金化方法和溶胶-凝胶-等离子体烧结法制备得到的材料氧化物粒子达到纳米级;真空熔炼方法可制备出微米级大小的氧化物弥散强化材料。上述方法制备的材料强度均得到改进。 相似文献
6.
7.
8.
扁平状Fe-Si-Al合金微粉的抗EMI特性研究 总被引:1,自引:0,他引:1
评述了用扁平状Fe-Si-Al合金微粉磁性材料制备的抗EMI材料的工艺,特性。用机械合金化方法制备了Fe-Si-Al磁性合金,研究了不同机械合金化时间材料的相结构,电磁特征,实验证明,用机械合金化制备的Fe-Si-Al合金能应用于抗电磁干扰系统。 相似文献
9.
10.
采用Ti,Si,Al粉和石墨粉等元素作为主要原料,利用行星式球磨机,研究通过机械合金化法(MA)的反应球磨技术(RBM)活化烧结制备Ti3SiC2和Ti3A1C2粉末材料.通过X-射线衍射、扫描电镜等手段,分析研究了机械合金化过程中的元素组织结构变化和可能的机械化学反应.提出实验中机械合金化趋向于界面原子逐渐扩散的反应机制. 相似文献
11.
12.
机械合金化制备纳米材料 总被引:3,自引:0,他引:3
纳米科技的发展推动了社会乃至全球的经济发展.机械合金化(Mechnical Alloying简称MA)作为一种极具价值的制备纳米材料的方法被越来越多的人所采用.本文对纳米材料的结构、材料的球磨技术、机械合金化制备纳米材料的过程及原理、利用机械合金化制备电触头材料及扩展端际固溶度等进行了阐述. 相似文献
13.
Mechanical alloying and hot extrusion were studied as a means to dispersion harden an intermetallic compound based on Ni
3
Al- B from elemental powder mixture. The oxide used for the dispersoids was partially stabilized zirconia. During mechanical
alloying the microstructure evolved according to the characteristic stages found in other mechanical alloying systems. Completion
of the alloying reaction required 16 h, beyond which loss of the crystalline property set in. Experimental observation of
the grain refinement during mechanical alloying agreed with a prediction based on an existing model. Compared to V- cone mixing,
the mechanical alloying produced a homogeneous distribution of fine dispersoids. The refined grain structure and dispersoids
resulted in a high tensile yield strength over a wide range of temperatures. 相似文献
14.
Myung-Jin Suk Jin-Ho Hyun Ji-Soon Kim Young-Soon Kwon Young Do Kim 《Metals and Materials International》2002,8(4):353-357
The equilibrium morphology of W-particles in liquid Cu was observed to be spherical (nonfaceted). When W and Cu were subjected to mechanical alloying treatment, the morphology of the W-particle in contact with liquid Cu was faceted. With prolonged heat treatment, the W-particle gradually became nonfaceted in morphology. The time needed to attain the equilibrium nonfaceted morphology depends on the duration of the mechanical alloying process. The present paper describes the morphological variation in the W-particle in liquid Cu that occurs during the heat treatment of Cu-5wt.%W composite powder prepared by a mechanical alloying process. The effect of mechanical alloying treatment on the morphology of the W-particle in contact with liquid Cu is discussed. 相似文献
15.
PreparationofLaNiBasedAloysUsedinNiMetalHydrideBateriesbyMechanicalAloyingLiDongpei,YingQiming,ZhangJian(李东培)(应启明)(张健)Gener... 相似文献
16.
合金元素在ZrCr2 Laves相中的晶格占位及其对力学性能的影响 总被引:1,自引:0,他引:1
应用Rietveld模拟计算和实验X射线衍射分析合金元素V、Nb和Mo在ZrCr2 Laves相金属间化合物中的晶格占位,研究合金化对ZrCr2 Laves相力学性能的影响。研究结果表明:合金元素V和Mo占据ZrCr2 Laves相金属间化合物中Cr原子的晶格位置,而Nb则占据Zr原子的晶格;添加合金元素V、Nb和Mo使ZrCr2 Laves相化合物硬度及脆性度降低,断裂韧度显著提高,即合金化对ZrCr2 Laves相起软化作用。初步探讨合金元素对ZrCr2 Laves相力学性能的影响机制。 相似文献
17.
M.H. Enayati F. Karimzadeh S.Z. Anvari 《Journal of Materials Processing Technology》2008,200(1-3):312-315
The nanocrystalline NiAl intermetallic compound was synthesized by mechanical alloying of the elemental powders. The structural changes of powder particles during mechanical alloying were studied by X-ray diffractometery, scanning electron microscopy and microhardness measurements. The mechanical alloying resulted in the gradual formation of nanocrystalline NiAl with a grain size of 20 nm. It was found that NiAl phase develops by continuous diffusive reaction at Ni/Al layers interfaces. The NiAl compound exhibited high microhardness value of about 1035 Hv. 相似文献
18.
纳米(Ti,Ni,Fe)-Al金属间化合物及其复合材料研究进展 总被引:4,自引:0,他引:4
(Ti,Ni,Fe)-Al金属间化合物具有优良的性能,在航空材料和中高温结构材料等领域内具有重要的应用价值。采用机械合金化制备、合成纳米金属间化合物及其复合材料有望克服金属间化合物固有的室温脆性及高温蠕变强度低的缺陷。本文综合评述了国内外在纳米(Ti,Ni,Fe)-Al金属间化合物及其复合材料的机械合金化合成及其烧结固化与力学性能等方面所取得的主要研究成果,并就该研究领域的不足之处及其今后的发展方向提出了一些看法。 相似文献
19.
对机械合金化Ni6Cr4W1.5Fe9Ti高熵合金粉末进行激光熔化沉积,制备了该高熵合金的熔覆涂层,研究了机械合金化时间对涂层显微组织和耐蚀性能的影响。结果表明,机械合金化时间的增加可促进合金粉末成分的均匀化,且有利于涂层的致密化及其组织的晶粒细化。机械合金化棒磨4 h后的高熵合金粉末中,各组元均匀分布,并形成了FCC+BCC的双相固溶体结构;通过激光熔化沉积后,双相固溶体结构转变为FCC单相固溶体结构,组织主要由4~6μm的等轴晶和少量胞状晶组成。机械合金化棒磨4 h粉末制备熔覆涂层的致密度和硬度最高、耐蚀性最佳,其耐蚀性相较于棒磨0 h粉末制备熔覆涂层提升了近两个数量级。 相似文献
20.
Laves相金属间铬化物的制备研究进展 总被引:5,自引:0,他引:5
拓扑密排结构的金属间化合物是潜在的高温结构材料,Laves相金属间化合物是其中最大的一类。而Laves相金属间铬化物Cr2X(X为Ti、Nb、Ta、Zr、Hf等)近年来成为高温结构材料研究中的一个热点,因为这些化合物具有较高的熔点、较低的密度和比较好的抗氧化性。有多种方法可以制备Laves相金属间铬化物。对目前Laves相铬化物的各种制备工艺技术现状及研究进展进行了综述,重点介绍了国内外制备Laves相金属间铬化物的熔铸法、定向凝固、机械合金化(MA)、机械合金化 热固相反应、机械合金化 热压法及铸锭冶金等有效技术,并评述了这些制备工艺的优缺点,指出了研究中存在的问题和今后的发展方向。 相似文献