Homo- and copolymerizations of 3-(N-carbazolyl)-1-propyne and its homologues by Mo and W catalysts

Summary 3-(N-Carbazolyl)-1-propyne polymerized with MoCl₅- and WCl₆-based catalysts to produce a polymer in high yields. The MoCl₅ and MoCl₅-n-Bu₄Sn catalysts were the most effective (the systems solidified immediately after initiation of polymerization with these catalysts). The product polymer was a yellow solid insoluble in any solvent. Copolymerization of the present monomer with tert-butylacetylene by MoCl₅-n-Bu₄Sn produced a copolymer; it had a high molecular weight (M _w 350,000), completely dissolved in toluene, CHCl₃ etc, and formed a free-standing film by solution casting. -N-Carbazolyl-1-hexyne and-1-octyne produced toluene-insoluble polymers with WCl₆-Ph₄Sn.     

Polymerization of 1-butyne and isopropylacetylene by transition metal catalysts and geometric structure of polymers

Polymerization of 1-butyne and isopropylacetylene was studied using MoCl₅, WCl₆, and two Ziegler catalysts [Fe(acac)₃-Et₃Al, Ti(On-Bu)₄-Et₃Al]. 1-Butyne was polymerized in high yields with WCl₆ and Fe(acac)₃-Et₃Al to give a yellow, air-sensitive polymer. The cis content of poly(1-butyne), evaluated by ¹³C n.m.r., was about 80% irrespective of polymerization conditions. Isopropylacetylene was polymerized well by any of MoCl₅, WCl₆, and Fe(acac)₃-Et₃Al; the polymer formed was a light yellow air-sensitive powder. The cis content of poly(isopropylacetylene) varied from 65% to 90% according to polymerization conditions. Substituent effects on polymerization and polymer structure are discussed.     

Synthesis and photoluminescence property of polyacetylenes containing liquid crystalline side groups

A series of new side-chain liquid crystalline (LC) polyacetylenes containing 4-(trans-n-alkylcyclohexanylcarbonyloxy)phenyl 4-alkynyloxybenzoate side groups were synthesized by using [Rh(nbd)Cl]₂, WCl₆ and MoCl₅ as polymerization catalysts. The synthesized polymers were characterized by differential scanning calorimetry, optical microscopy and X-ray diffraction measurements. The monomers showed a nematic phase while all polymers revealed the nematic, smectic A and smectic C phases. X-ray diffraction measurements proved that all the polymers show an interdigitated bilayer structure. The optical properties of the polymers were investigated by UV-vis and photoluminescent spectroscopies. The polymer films emitted green-blue photoluminescence at about 500 nm.     

Microstructure of polyphenylacetylene obtained by MoCl5 and WCl6 type catalysts

Summary The microstructure of polyphenylacetylenes prepared with MoCl₅ and WCl₆ catalysts under different reaction conditions was determined by 200 MHz ¹H-NMR spectroscopy. Cis, trans and cyclohexadiene sequences were evidenced in all polymers. Two mechanisms are responsible for the polymer microstructure: isomerization prior to double bond formation, and thermal isomerization after double bond formation. When trans sequences are formed mainly through the first mechanism, the polymer is almost void of cyclohexadiene structural units and its molecular weight is very high. This can be explained through a unimolecular termination mechanism, i.e., intramolecular cyclization of the cis-polymer chain end. The control of polyphenylacetylene microstructure by these two mechanisms explains why a cis-cisoidal polymer could not be obtained by using MoCl₅ or WCl₆ catalysts. Dedicated to Prof. H.-J. Cantow in honor of his 60th birthday     

Polymerization and polymer properties of (2-methyl-5-tert-butylphenyl)acetylene: steric effects of the ring substituents

Summary (2-Methyl-5-tert-butylphenyl)acetylene (2Me5tBuPA) polymerized in the presence of MoCl₅-n-Bu₄Sn catalyst in 1,4-dioxane to give a high molecular weight polymer . Not only MoCl₅- but also WCl₆-based catalysts were effective. The polymer obtained was a dark brown solid, soluble in organic solvents such as toluene and CHCl₃, and formed a freestanding film by solution casting. The onset temperature of weight loss of the polymer in air was 260 °C. Its oxygen permeability coefficient was 43 barrers, which is twice that of natural rubber. Differences from the results (usually lower molecular weight, not film-forming, and thermally less stable) of both poly(phenylacetylene) and poly[o-methylphenyl)acetylene] are attributable to the synergistic steric effect of the o-methyl and m-tert-butyl groups.     

Phosphonated poly(1,6-heptadiyne) derivatives prepared by metathesis polymerization for nonlinear optics

Summary Poly(triethyldipropargylphosphonoacetate) (TDPA), poly[(tetraethyl dipropargylmethylenediphosphonate) (TDMDP) were prepared by metathesis polymerization using transition-metal catalysts. MoCl₅-based catalyst systems were more effective for the polymerization of these monomers than WCl₆-based catalyst systems. Resulting polymers exhibited good solubility in common organic solvents and could be easily cast on glass plates to give thin films. Third-harmonic Maker fringe technique was used to measure third-order nonlinear susceptibility,x ⁽³⁾, for thin film of poly(TDPA). Thex ⁽³⁾ was evaluated to be 3.4x10^-11 esu at incident wavelength of 1.907m.     

An amphoteric water‐soluble copolymer. II. Effect of its molecular weight on the dispersion of barium titanate in water

An amphoteric water‐soluble copolymer, that is, polyacrylamide/(α‐N,N‐dimethyl‐N‐acryloyloxyethyl)ammonium ethanate (PAAM/DAAE) was synthesized and it showed the ability to disperse BaTiO₃ (BT) particles in aqueous solutions. In this work, the effect of molecular weight of this polymer on the dispersing properties was further examined. The results indicate that the effectiveness of three polymer samples with different molecular weights in the dispersion of BT particles is P2 (M_w = 1.1 × 10⁵) > P1 (M_w = 1.2 × 10⁴) > P3 (M_w = 3.0 × 10⁵). Apparently, P2 is most effective in dispersing the particles, reducing the viscosity of the suspensions, and obtaining highest green and sintered densities. This is attributed to the highest adsorption of this polymer onto BT powder, and causes strongest electrostatic and steric repulsions. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 886–891, 2006     

Synthesis and properties of poly(phenylacetylene)s with pendant imino groups

Summary Polymerization of phenylacetylenes containing imino groups with a variety of transition metal catalysts was investigated. The monomers employed were N-(4-ethynylbenzylidene)aniline (1), N-(3-ethynylbenzylidene)aniline (2), N-(4-ethynylbenzylidene)-2,6-diisopropylaniline (3), N-(4-ethynylbenzylidene)-4-hexylaniline (4), N-(4-ethynylbenzylidene)butylamine (5), and N-(4-ethynylbenzylidene)octylamine (6). All of the monomers smoothly polymerized with [(nbd)RhCl]₂-Et₃N to give polymers in excellent yields, whereas no polymerization took place with W, Mo, and Fe catalysts. The produced polymers were orange to red solids and soluble in common organic solvents except for poly(1). UV-vis spectra of the polymers indicated that the main chains possess a similar degree of conjugation to that of poly(phenylacetylene). However, the stability of polymer backbone toward oxidative cleavage in solution remarkably improved, which is contributed by the electron-withdrawing character of imino groups. Received: 24 August 1999/Accepted: 29 September 1999     

Methylaluminoxane‐activated neodymium chloride tributylphosphate catalyst for isoprene polymerization

The polymerization of isoprene was examined by using a novel binary catalyst system composed of neodymium chloride tributylphosphate (NdCl₃·3TBP) and methylaluminoxane (MAO). The NdCl₃·3TBP/MAO catalyst worked effectively in a low MAO level ([Al]/[Nd] = 50) to afford polymers with high molecular weight (M_n ～10⁵), narrow molecular weight distribution (M_w/M_n = 1.4–1.6), and high cis‐1,4 stereoregularity (> 96%). The catalytic activity increased with an increasing [Al]/[Nd] ratio from 30 to 100 and polymerization temperature from 0 to 50°C, while the M_n of polymer decreased. The presence of free TBP resulted in low polymer yield. Polymerization solvent remarkably affected the polymerization behaviors; the polymerizations in aliphatic solvents (cyclohexane and hexane) gave polymer in higher yield than that in toluene. The M_w/M_n ratio of the producing polymer remained around 1.5 and the gel permeation chromatographic curve was always unimodal, indicating the presence of a single active site in the polymerization system. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40153.     

Electron donors in carbocationic polymerization

Summary Low molecular weight (¯M_n 900–5000) narrow molecular weight distribution (MWD; ¯M_w/M_n = 1.1–1.2)tert.-chlorine telechelic polyisobutylenes (PIBs) have been synthesized by the use of thetrans-2,5-dimethyl-2,5-diacetoxy-3-hexene (DiOAcDMeH₆)/BCl₃ initiating system in the presence of the electron donor (ED) dimethyl sulfoxide (DMSO) in methyl chloride diluent at –30°C. The living character of the polymerization was demonstrated by linear M_n versus W_p (weight of polymer) plots starting at the origin with the slope of 1/[I_o] (where [I_o] = initiator concentration). DMSO reduces the overall rate of polymerization, however, it increases the initiator efficiency (I_eff) to 100%. The number averagetert.-chlorine end functionality is -F_n=1.97±0.04, by¹H NMR spectroscopy. Polymerization mechanistic details are discussed. This is the first time narrow MWDtert.-chlorine telechelic PIB has been prepared close to the reflux temperature of methyl chloride.Paper XXVII in the series on Living Carbocationic Polymerization. For paper XXVI see Kaszas et al., J. Macromol. Sci. Chem. to appear (1989)     

Direct Controlled Polymerization of Ionic Monomers by Surface-Initiated ATRP Using a Fluoroalcohol and Ionic Liquids

Surface-initiated atom transfer radical polymerization (ATRP) of (2-methacryloyloxyethyl)trimethylammonium chloride (MTAC), 3-(N-2-methacryloyloxyethyl-N,N-dimethyl) ammonatopropanesulfonate) (MAPS), and 2-methacryloyloxyethyl phosphorylcholine (MPC) was carried out in 2,2,2-trifluoroethanol (TFE) containing a small amount of 1-hexyl-3-methylimidazolium chloride at 60 °C to produce well-defined ionic polymer brushes and the corresponding free polymers with predictable number-average molecular weight (M_n, 1×10⁴−3×10⁵ g mol⁻¹) and narrow molecular weight dispersity (M_w/M_n<1.2). A first-order kinetic plot for ATRP of MTAC and MAPS revealed a linear relationship between the monomer conversion index (ln([M]₀/[M])) and polymerization time. Reduction in polymerization rates was observed with an increase in ionic liquid concentration. The M_n of both poly(MTAC) and poly(MAPS) increased in proportion to the conversion. The sequential polymerization of MAPS initiated with the chain ends of poly(MAPS) produced the postpolymer with quantitative efficiency. The thickness of the polymer brush was controllable from 5 to 100 nm based on the M_n of the polymer. These results suggest the successful control of the polymerization of sulfobetaine-type methacrylates owing to the TFE and ionic liquids. In particular, the high affinity of TFE for the sulfobetaine monomers and polymers yielded a homogeneous polymerization media to improve surface-initiated polymerization generating the polymer brushes on the substrate surface as well as the free polymers formed in the solution. The effect on ATRP of the chemical structure of ionic liquids and ligands for copper catalyst was also investigated.     

Molecular-hydrodynamic study of poly(<Emphasis Type="Italic">N</Emphasis>-methyl-<Emphasis Type="Italic">N</Emphasis>-vinylacetamide) macromolecules

High-velocity sedimentation, translational isothermal diffusion, and viscometry in H₂O and DMF are used to investigate the samples and fractions of poly(N-methyl-N-vinylacetamide) synthesized by free-radical polymerization and fractionated in a chloroform-diethyl ether system. Molecular masses M and the Mark-Kuhn-Houwink-Sakurada relations are obtained for the fractions in the molecular mass range M × 10⁻³ = 3.5−540.0. The negative temperature coefficient of intrinsic viscosity is revealed for both solvents. The length of the Kuhn statistical segment and the hydrodynamic diameter of poly(N-methyl-N-vinylacetamide) macromolecules are estimated; the hydrodynamic volumes occupied by water-soluble poly(N-methyl-N-vinylacetamide), poly(1-vinyl-2-pyrrolidone), poly(vinylformamide), and pullulan molecules are compared.     

Primary amine functionalized polystyrenes by atom transfer radical polymerization

Primary amine functionalized polystyrenes were prepared in quantitative yields by atom transfer radical polymerization using the adduct of 1‐(bromoethyl)benzene with 1‐(4‐aminophenyl)‐1‐phenylethylene as initiator for styrene polymerization in the presence of a copper(I) bromide/N,N,N′,N′,N″‐pentamethyldiethylenetriamine catalyst system. The polymerizations proceeded via a controlled free radical polymerization process to afford quantitative yields of the corresponding primary amine functionalized polystyrenes with predictable molecular weights (M_n = 2 × 10³ to 10 × 10³ g mol^?1), relatively narrow molecular weight distributions (M_w/M_n = 1.03–1.49), well defined chain‐end functionalities and initiator efficiencies as high as 0.92. The polymerization process was monitored by gas chromatographic analysis. The primary amine functionalized polymers were characterized by thin layer chromatography, size exclusion chromatography, potentiometry and spectroscopy. Experimental results are consistent with quantitative functionalization via the 1,1‐diphenylethylene derivative. Polymerization kinetic measurements show that the polymerization reaction follows first order rate kinetics with respect to monomer consumption and the number average molecular weight increases linearly with monomer conversion. © 2003 Society of Chemical Industry     

Polymerization of vinyl chloride with butyllithiums and metallocene catalysts

Polymerizations of vinyl chloride (VC) with butyllithium (BuLi) and metallocene catalysts were investigated. In the polymerization of VC with BuLi, the activity for polymerization decreased in the following order; t‐BuLi > n‐BuLi > s‐BuLi. A polymer controlled structurally in the main chain was found to be synthesized from the polymerization of VC with BuLi. The molecular weights of polymers obtained in bulk polymerization were higher than those of polymers obtained in solution. A linear relationship of the M_n of the polymer and the polymer yields was observed. The M_w/M_n of the polymer did not change significantly during polymerization, although the M_w/M_n was around 2. Thermal stability of the polymer obtained with BuLi was higher than that of polymer obtained with radical initiators, as determined by TGA measurements. In the polymerization of VC with Cp*TiX₃/MAO (X: Cl and OCH₃) catalysts, polymers were obtained with both catalysts, although the rate of polymerization was slow. The Cp*Ti(OCH₃)₃//MAO catalyst in CH₂Cl₂ gave higher‐molecular‐weight polymers in a better yield than in toluene. From elemental analysis and the NMR spectra of the polymers, the Cp*Ti(OCH₃)₃/MAO catalyst gave polymers consisting of repeating regular head‐to‐tail units, in contrast to the Cp*TiCl₃/MAO catalyst, which gave polymers having anomalous units.     

Schiff base‐substituted polyphenol: synthesis,characterisation and non‐isothermal degradation kinetics

BACKGROUND: Polymers of phenols and aromatic amines have emerged as new materials in fields such as superconductors, coatings, laminates, photoresists and high‐temperature environments. The stability, kinetics and associated pollution of the thermal decomposition of oligophenols are of interest for the aforementioned fields. RESULTS: A new Schiff base polymer, derived from N,N′‐bis(2‐hydroxy‐3‐methoxyphenylmethylidene)‐2,6‐pyridinediamine, was prepared by oxidative polycondensation. Characterisations using Fourier transform infrared, UV‐visible, ¹H NMR and ¹³C NMR spectroscopy, thermogravimetric/differential thermal analysis, gel permeation chromatography, cyclic voltammetry and conductivity measurements were performed. The number‐average (M_n) and weight‐average molecular weight (M_w) and dispersity (D = M_w/M_n) of the polymer were found to be 61 000 and 94 200 g mol^?1 and 1.54, respectively. Apparent activation energies of the thermal decomposition of the polymer were determined using the Tang, Flynn–Wall–Ozawa, Kissinger–Akahira–Sunose and Coats–Redfern methods. The most likely decomposition process was a D_n deceleration type in terms of the Coats–Redfern and master plot results. CONCLUSION: The mechanism of the degradation process can be understood through the use of kinetic parameters obtained from various non‐isothermal methods. Copyright © 2009 Society of Chemical Industry     

Highly Efficient Extraction of Rhodium(III) from Hydrochloric Acid Solution with Amide-Containing Tertiary Amine Compounds

Extraction of Rh(III) from a HCl solution with N,N-disubstituted amide–containing tertiary amine (ACTA) compounds (N,N-di-n-hexyl(N-methyl-N-n-octyl-ethylamide)amine (MonoAA), N-n-hexyl-bis(N-methyl-N-n-octyl-ethylamide)amine (BisAA), and tris(N-methyl-N-n-octyl-ethylamide)amine (TrisAA)) was investigated. The ACTAs extract Rh(III) more efficiently than tri-n-octylamine (TOA), and the extraction efficiency increases with increasing number of amide groups: TrisAA > BisAA > MonoAA ? TOA. For all ACTAs, the predominant Rh(III) complex extracted from 2 M HCl is probably {[RhCl₅(H₂O)]·(ACTA·H)₂}. The apparent basicity of the ACTAs and TOA varies in the opposite order from that observed for the Rh(III) extraction efficiency. Rh(III) can be readily back-extracted using 10 M HCl solution possessing a high selectivity over similarly loaded Pd(II) and Pt(IV).     

Stereoregular fluoropolymers: 5. The ring-opening polymerization of 2-trifluoromethylbicyclo-[2.2.1]hepta-2,5-diene

2-Trifluoromethylbicyclo[2.2.1]hepta-2,5-diene undergoes metathesis ring-opening polymerization under the influence of the initiators WCl₆/(CH₃)₄Sn, MoCl₅/(CH₃)₄Sn, OsCl₃, RuCl₃, IrCl₃ and ReCl₅. Analysis of the infrared and high-field ¹³C-n.m.r. spectra of the different polymers leads to the following conclusions: the Mo based initiator gives predominantly trans-vinylene units; the Re based system shows the greatest tendency towards stereoregulation and gives predominantly cis-vinylenes; and the other catalysts are unselective in this respect. 2-Trifluoromethylbicyclo[2.2.1]hepta-2,5-diene is more readily polymerized than its 2,3-bis(trifluoromethyl) analogue; both monomers display no vinylene stereoselectivity with the very reactive W based initiator, whereas with both Mo and Ru based initiators the disubstituted monomer displays significantly greater trans-vinylene selectivity.     

Effect of prepolymerization on propylene polymerization

Polymerization of propylene was performed using MgCl₂. EtOH.TiCl₄.ID.TEA.ED catalyst system in hexane, where internal donor (ID) was an organic diester and external donor (ED) was a silane compound and also triethyl aluminum (TEA) as activator. A new method called isothermal/nonisothermal method (INM), a combination of isothermal and nonisothermal methods, was applied to produce the spherical polymer particles. The effects of the INM method and prepolymerization temperature on the final polymer morphology, M_w, and catalyst activity were also investigated. The morphology of the polymers was evaluated through scanning electron microscopy (SEM) images. GPC results were used for molecular weight (M_w) evaluation. It was found that the polymers had a better morphology when they were prepared using INM method. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Formation of branched polyethylenes by ethylene homopolymerization using LNiBr2 homo- and heterogeneous precatalysts: Interpretation of the polymer structures in comparison with commercial LLDPE

Comparative data on the micro-structures and properties of branched polyethylenes (BPE) produced via ethylene homopolymerization over homogeneous N,N-α-diimine LNiBr₂ complexes with different ligand composition (AlEt₂Cl as a cocatalyst) and corresponding supported catalysts LNiBr₂/SiO₂(Al) (Al[iso-Bu]₃ as a cocatalyst) are presented. Noticeable differences were observed between micro-structures of BPEs obtained using homo- and heterogeneous LNiBr₂ complexes as catalysts. Supported catalysts produce BPEs with the majority of methyl branches (17–18 CH₃(1000 C)⁻¹ characterized by different molecular masses (1800–210 kg mol⁻¹) and molecular weight distributions (M_w[M_n]⁻¹ = 5.9 and 2.6). Thermal and mechanical properties of these BPE samples obtained over supported Ni catalysts are similar to those of commercial LLDPE samples prepared with metallocene and Ziegler-Natta catalysts.     

Synthesis of a cis-rich,living poly[(o-methylphenyl)acetylene] by use of the MoOCl4-n-Bu4Sn-EtOH catalyst

Summary Polymerization of (o-methylphenyl)acetylene (o-MePA) by MoOCl₄-n-Bu₄Sn-EtOH catalyst in toluene at 0°C provided a cis-rich living polymer; cis 77%, M _w/M _n=1.21. The polymerization at -30°C gave results similar to those for 0°C, whereas the polymer obtained at 30°C exhibited a broader molecular weight distribution (MWD) and a lower cis content. Among several organotin compounds, only n-Bu₄Sn was effective for the living polymerization of o-MePA. The bulkier the alkyl group of alcohols as the third catalyst component, the broader the MWD of the polymer, while the geometrical structure was not affected by the alcohols.