Supercapacitor device performances of polycarbazole/graphene and polycarbazole/nanoclay/graphene nanocomposites

In this study, graphene oxide (GO) is chemically reacted with sodium borohydride (NaBH₄) to form reduced graphene oxide (rGO). rGO, polycarbazole (PCz)/rGO and PCz/nanoclay/rGO materials were obtained by chemical polymerisation method. These three materials were characterised by Fourier-transform infra-red spectroscopy-attenuated transmission reflectance, scanning electron microscopy, energy-dispersive X-ray analysis, cyclic voltammetry (CV), galvanostatic charge–discharge and electrochemical impedance spectroscopy. The PCz/nanoclay/rGO nanocomposite shows significantly improved capacitance (C_sp?=?187.78?F?g^?1) compared to that of PCz/rGO (C_sp?=?74.18?F?g^?1) and rGO (C_sp?=?20.78?F?g^?1) at the scan rate of 10?mV?s^?1 by CV method. The supercapacitor device performance results show high power density (P?=?1057.81?W?kg^?1) and energy density (E?=?1.7?Wh?kg^?1) obtained from Ragone plot for PCz/nanoclay/rGO material. Stability tests were also examined by the CV method for 1000 cycles.     

rGO/CuO/PEDOT nanocomposite formation,its characterisation and electrochemical performances for supercapacitors

ABSTRACT

Supercapacitor properties of rGO, CuO, PEDOT and rGO/CuO at [rGO]_o/[CuO]_o?=?1:1; 1:1.5; 1:2 and rGO/CuO/PEDOT nanocomposite at [rGO]_o/[CuO]_o/[EDOT]_o?=?1:1:1; 1:1:3; 1:1:5 were investigated using chemical reduction of GO and in-situ polymerisation process. SEM-EDX, HRTEM, BET surface area analysis confirm the nanocomposite formations. Nanocomposite materials are also analysed through FTIR-ATR, Raman, TGA-DTA, GCD, CV and EIS. The highest specific capacitance of C _sp?=?156.7 F/g at 2?mV/s is determined as rGO/CuO/PEDOT at [rGO]_o/[CuO]_o/[EDOT]_o?=?1:1:5. In addition, two-electrode supercapacitor device for rGO/CuO/PEDOT at [rGO]_o/[CuO]_o/[EDOT]_o?=?1:1:5 are found to provide a maximum specific energy (E?=?14.15 Wh/kg at 20?mA) and specific power (P?=?24730 W/kg at 50?mA), electrical serial resistance (ESR?=?13.33 Ω) with good capacity retention after 3000 cycles. An equivalent circuit model of LR1(CR2)(QR3) is proposed to interpret the EIS data. The supercapacitor performance of the rGO/CuO/PEDOT nanocomposite electrode indicates the synergistic effect of hybrid supercapacitors.     

Hydrothermal synthesis of reduced graphene oxide-Mn3O4 nanocomposite as an efficient electrode materials for supercapacitors

Mn₃O₄ nanoparticles (NPs) are decorated with reduced graphene oxide nanosheets (rGO-Mn₃O₄) through a facile and eco-friendly hydrothermal method. The as-synthesized composite was characterized by XRD, SEM, TEM and Raman spectroscopy. The electrochemical properties of (rGO-Mn₃O₄) nanocomposite were studied as electrode materials for supercapacitors. The rGO-Mn₃O₄ nanocomposite exhibit high specific capacitance of 457 Fg^?1 at 1.0 A/g in 1 M Na₂SO₄ aqueous electrolyte. The rGO-Mn₃O₄ exhibits good capacitance retention by achieving 91.6% of its initial capacitance after 5000 cycles. The excellent electrochemical performance is attributed to the increased electrode conductivity in the presence of graphene network.     

Multiwalled carbon nanotubes/polypyrrole/graphene/nonwoven fabric composites used as electrodes of electrochemical capacitor

The reduced graphene oxide/nonwoven fabric (rGO/NWF) composites have been fabricated through heating the NWF coated with the mixture of GO and HONH₂·HCl at 130°C, during which the GO is chemically reduced to rGO. Then the composites of polypyrrole (PPy)/rGO/NWF have been prepared through chemically polymerizing pyrrole vapor by using the FeCl₃·6H₂O adsorbed on rGO/NWF substrate as oxidant. Finally, multiwalled carbon nanotubes (MWCNTs) are used as conductive enhancer to modify PPy/rGO/NWF through dip‐dry process to obtain MWCNTs/PPy/rGO/NWF. The prepared composites have been characterized and their capacitive properties have been evaluated in 1.0M KCl electrolyte by using two‐electrode symmetric capacitor test. The results reveal that MWCNTs/PPy/rGO/NWF possesses a maximum specific capacitance (C_sc) of about 319 F g^?1 while PPy/rGO/NWF has a C_sc of about 277.8 F g^?1 at the scan rate of 1 mV s^?1 and that optimum MWCNTs/PPy/rGO/NWF retains 94.5% of initial C_sc after 1000 cycles at scan rate of 80 mV s^?1 which is higher than PPy/rGO/NWF (83.4%). Further analysis reveals that the addition of MWCNTs can increase the charger accumulation at the outer and inner of the composites, which is favorable to improve the stability and the rapid charge‐discharge capacity. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41023.     

One-step electrosynthesis of MnO2/rGO nanocomposite and its enhanced electrochemical performance

We present a facile one-step electrochemical approach to generate MnO₂/rGO nanocomposite from a mixture of Mn₃O₄ and graphene oxide (GO). The electrochemical conversion of Mn₃O₄ into MnO₂ through potential cycling is expedited in the presence of GO while the GO is reduced into reduced graphene oxide (rGO). The MnO₂ nanoparticles are evenly distributed on the rGO nanosheets and act as the spacer to prevent rGO nanosheets from restacking. This unique structure provides high electroactive surface area (1173?m² g^?1) that improves ions diffusion within the MnO₂/rGO structure. As a result, the MnO₂/rGO nanocomposite exhibits high specific capacitance of 473?F?g^?1 at 0.25?A?g^?1, which is remarkably higher (3 times) than the Mn₃O₄/GO prior conversion. In addition, the electrosynthesized nanocomposite shows higher conductivity and excellent potential cycling stability of 95% at 2000 cycles.     

Synthesis of 9H-carbazole-9-carbothioic methacrylic thioanhydride,electropolymerization, characterization and supercapacitor applications

A novel organic molecule of 9H-carbazole-9-carbothioic methacrylic thioanhydride (CzCS₂metac) was synthesized by incorporating CS₂ and methacrylate groups into the carbazole monomer structure. CzCS₂metac was characterized by FTIR, ¹H-NMR and ¹³C-NMR spectroscopy. CzCS₂metac was electropolymerized in 0.1 M tetraethylammonium tetrafluoroborate (TEABF₄)/acetonitrile (CH₃CN) on glassy carbon electrode (GCE). The characterization of the electrocoated P(CzCS₂metac)/CFME thin film was studied by various techniques, such as cyclic voltammetry, scanning electron microscopy–energy-dispersive X-ray analysis and electrochemical impedance spectroscopy. The specific capacitance (C _sp) of P(CzCS₂metac)/MWCNT/GCE in the scan rate of 20 mV s^?1 (C _sp = 38.48 F g^?1 from area formula, C _sp = 38.52 F g^?1 from charge formula) was increased ~15.66 and ~15.64 times in area and charge formulas compared to P(CzCS₂metac)/GCE (C _sp = 2.46 F g^?1 from area and charge formulas). The same results were also obtained from Nyquist graphs. The specific capacitance value of composite film (C _sp = 1.09 × 10^?3 F) is ~15.66 times higher than the polymer film (C _sp = 6.92 × 10^?5 F). The composite film may be used as supercapacitor electrode material in energy storage devices.     

Facile synthesis of reduced graphene oxide/MWNTs nanocomposite supercapacitor materials tested as electrophoretically deposited films on glassy carbon electrodes

This paper reports on a facile synthesis method for reduced graphene oxide (rGO)/multi-walled carbon nanotubes (MWNTs) nanocomposites. The initial step involves the use of graphene oxide to disperse the MWNTs, with subsequent reduction of the resultant graphene oxide/MWNTs composites using l-ascorbic acid (LAA) as a mild reductant. Reduction by LAA preserves the interaction between the rGO sheets and MWNTs. The dispersion-containing rGO/MWNTs composites was characterized and electrophoretically deposited anodically onto glassy carbon electrodes to form high surface area films for capacitance testing. Pseudo capacitance peaks were observed in the rGO/MWNTs composite electrodes, resulting in superior performance with capacitance values up to 134.3 F g^?1 recorded. This capacitance value is higher than those observed for LAA-reduced GO (LAA-rGO) (63.5 F g^?1), electrochemically reduced GO (EC-rGO) (27.6 F g^?1), or electrochemically reduced GO/MWNTs (EC-rGO/MWNTs) (98.4 F g^?1)-based electrodes.     

Conversion of pencil graphite to graphene/polypyrrole nanofiber composite electrodes and its doping effect on the supercapacitive properties

Graphene platelets were synthesized from pencil flake graphite and commercial graphite by chemical method. The chemical method involved modified Hummer's method to synthesize graphene oxide (GO) and the use of hydrazine monohydrate to reduce GO to reduced graphene oxide (rGO). rGO were further reduced using rapid microwave treatment in presence of little amount of hydrazine monohydrate to graphene platelets. Chemically modified graphene/polypyrrole (PPy) nanofiber composites were prepared by in situ anodic electropolymerization of pyrrole monomer in the presence of graphene on stainless steel substrate. The morphology, composition, and electronic structure of the composites together with PPy fibers, graphene oxide (GO), rGO, and graphene were characterized using X‐ray diffraction (XRD), laser‐Raman, and scanning electron microscopic (SEM) methods. From SEM, it was observed that chemically modified graphene formed as a uniform nanocomposite with the PPy fibers absorbed on the graphene surface and/or filled between the graphene sheets. Such uniform structure together with the observed high conductivities afforded high specific capacitance and good cycling stability during the charge–discharge process when used as supercapacitor electrodes. A specific capacitance of supercapacitor was as high as 304 F g^?1 at a current density of 2 mA cm^?1 was achieved over a PPy‐doped graphene composite. POLYM. ENG. SCI., 55:2118–2126, 2015. © 2014 Society of Plastics Engineers     

Microwave assisted synthesis of rGO/ZnO composites for non-enzymatic glucose sensing and supercapacitor applications

Zinc oxide (ZnO) and Graphene Oxide (GO) are known to show good electrochemical properties. In this paper, rGO/ZnO nanocomposites have been synthesised using a simple microwave assisted method. The nanocomposites are characterized using XRD, Raman, SEM and TEM. XRD reveals the wurtzite structure of ZnO and TEM shows the heterogeneous nucleation of ZnO nanocrystals anchored onto graphene sheets. The electrochemical properties of the rGO/ZnO nanocomposite enhanced significantly for applications in glucose sensors and supercapacitors. The non-enzymatic glucose sensor of this nanocomposite tested using cyclic voltammetry (CV) and chronoamperometry, exhibits high sensitivity (39.78 mA cm⁻² mM⁻¹) and a lower detection limit of 0.2 nM. The supercapacitor electrode of rGO/ZnO nanocomposite exhibits a significant increase in specific capacitance.     

Recent Advances in Electrochemical Performances of Graphene Composite (Graphene-Polyaniline/Polypyrrole/Activated Carbon/Carbon Nanotube) Electrode Materials for Supercapacitor: A Review

The latest trend in the direction of miniaturized portable electronic devices has brought up necessitate for rechargeable energy sources. Among the various non conventional energy devices, the supercapacitor is the promising candidate for gleaning the energy. Supercapacitor, as a new energy device that colligates the gap between conventional capacitors and batteries, it has attracted more attention due to its high power density and long cycle life. Many researchers work on, synthesizing new electrode material for the development of supercapacitor. The electrode material possesses salient structure and electrochemical properties exhibit the efficient performance of the supercapacitor. Graphene has high carrier mobility, thermal conductivity, elasticity and stiffness and also has a theoretical specific capacitance of 2630 m²g^??1 corresponds to a specific capacitance of 550 Fg^??1. This article summarizes and reviews the electrochemical performance and applications of various graphene composite materials such as graphene/polyaniline, graphene/polypyrrole, graphene/metal oxide, graphene/activated carbon, graphene/carbon nanotube as an electrode materials towards highly efficient supercapacitors and also dealt with symmetric, asymmetric and hybrid nature of the graphene based supercapacitor.     

Capacitor Applications of Nanocomposite Films for Poly(3,4-ethylenedioxythiophene-co-pyrrole)/Multi-Walled Carbon Nanotubes and Poly(3,4-ethylenedioxythiophene-co-pyrrole)/Copper Oxide

Polypyrrole/multi-walled carbon nanotube, poly(3,4-ethylenedioxythiophene)/multi-walled carbon nanotube and their nanocomposites P(EDOT-co-Py)/multi-walled carbon nanotube and P(EDOT-co-Py)/copper (II) oxide, (CuO) in the initial feed ratio of [EDOT]₀/[Py]₀ = 1/5 were electrosynthesized on glassy carbon electrode by cyclic voltammetric method. Their characterizations were performed by cyclic voltammetric, Fourier transform infrared-attenuated total reflectance, scanning electron microscopy, energy dispersion X-ray analysis, and electrochemical impedance spectroscopy. To the best of authors’ knowledge, the first report on polypyrrole/multi-walled carbon nanotube, PEDOT/multi-walled carbon nanotube, P(EDOT-co-Py)/multi-walled carbon nanotube and P(EDOT-co-Py)/CuO nanocomposite films were comparatively examined in 0.1 M NaClO₄/CH₃CN and in 0.1 M sodium dodecyl sulfate solutions. The highest specific capacitance for PEDOT/multi-walled carbon nanotube and polypyrrole/multi-walled carbon nanotube composite films were obtained as C_sp = 306 mF × cm^?2 for 3% multi-walled carbon nanotube and C_sp = 804 mF × cm^?2 for 1% multi-walled carbon nanotube, respectively. The highest specific capacitances were obtained as C_sp = 27.40 mF × cm^?2 and C_sp = 26.90 mF × cm^?2 for P(EDOT-co-Py)/multi-walled carbon nanotube includes the wt percent of 1% multi-walled carbon nanotube and P(EDOT-co-Py)/CuO includes the wt percent of 3% CuO, respectively. The C_sp of P(EDOT-co-Py)/CNT composite films were calculated as 9.43 and 11.49 mF × cm^?2 for 3 and 5% multi-walled carbon nanotube, respectively. In addition, The EIS results were simulated with the equivalent circuit model of R_s(C_dl1(R₁(QR₂)))(C_dl2R₃).     

High-performance supercapacitor of manganese oxide/reduced graphene oxide nanocomposite coated on flexible carbon fiber paper

Although supercapacitors have higher power density than batteries, they are still limited by low energy density and low capacity retention. Here we report a high-performance supercapacitor electrode of manganese oxide/reduced graphene oxide nanocomposite coated on flexible carbon fiber paper (MnO₂–rGO/CFP). MnO₂–rGO nanocomposite was produced using a colloidal mixing of rGO nanosheets and 1.8 ± 0.2 nm MnO₂ nanoparticles. MnO₂–rGO nanocomposite was coated on CFP using a spray-coating technique. MnO₂–rGO/CFP exhibited ultrahigh specific capacitance and stability. The specific capacitance of MnO₂–rGO/CFP determined by a galvanostatic charge–discharge method at 0.1 A g⁻¹ is about 393 F g⁻¹, which is 1.6-, 2.2-, 2.5-, and 7.4-fold higher than those of MnO₂–GO/CFP, MnO₂/CFP, rGO/CFP, and GO/CFP, respectively. The capacity retention of MnO₂–rGO/CFP is over 98.5% of the original capacitance after 2000 cycles. This electrode has comparatively 6%, 11%, 13%, and 18% higher stability than MnO₂–GO/CFP, MnO₂/CFP, rGO/CFP, and GO/CFP, respectively. It is believed that the ultrahigh performance of MnO₂–rGO/CFP is possibly due to high conductivity of rGO, high active surface area of tiny MnO₂, and high porosity between each MnO₂–rGO nanosheet coated on porous CFP. An as-fabricated all-solid-state prototype MnO₂–rGO/CFP supercapacitor (2 × 14 cm) can spin up a 3 V motor for about 6 min.     

A new As3Mo8V4/PANi/rGO composite for high performance supercapacitor electrode

Herein, [As₂^IIIAs^VMo₈^VIV₄^IVO₄₀]₂[Cu^ICu₂^II(pz)₄]₂·9H₂O/polyaniline/reduced graphene oxide (pz = pyrazine, abbreviated to As₃Mo₈V₄/PANi/rGO) composite is first assembled, characterized and systematically explored for its supercapacitor performance. As₃Mo₈V₄/PANi/rGO composite shows a exceptional specific capacitance (2351 F g^?1 at 1 A g^?1) and outstanding cyclic stability (96.9% after 5000 cycles). The symmetric supercapacitor exhibits high specific capacitance of 1295 F g^?1 at 1 A g^?1 and excellent energy density of 88.1 Wh kg^-1 at power density of 349.6 W kg^-1, while maintaining a notable capacitance retention of 85.7% after 5000 cycles at 2 A g^-1. The above results confirm the potential application of As₃Mo₈V₄/PANi/rGO composite in energy storage devices.     

Flake-like MoS2 nano-architecture and its nanocomposite with reduced Graphene Oxide for hybrid supercapacitors applications

In this article, we have synthesized flake-like MoS₂ nanoarchitecture by urea assisted hydrothermal method. To improve the electrical and electrochemical properties of MoS₂ nanoarchitecture, we formed its nanocomposite (MoS₂/r-GO) with 10% r-GO. After the addition of 10% r-GO, the nanocomposite shows the electrical conductivity of 1.24 × 10⁻¹ Sm⁻¹ that is higher than the pure MoS₂ (2.2 × 10⁻⁷ Sm⁻¹). The prepared nanocomposite also showed higher specific capacitance (441 Fg^-1 at 1 Ag^-1) than the pure MoS₂ nanoarchitecture (248 Fg^-1 at 1 Ag^-1). Moreover, nanocomposite lost just 15.8% of its initial capacitance after 1000 charge-discharge cycles. The enhanced electrochemical activity of the nanocomposite is due to its unique flake-like structure and its reduced charge transfer resistance (Rct ~ 23.5 Ω). The 2-D flake-like structure of the electrode increased its contact area with the r-GO matrix and electrolyte. The higher electrical conductivity and specific surface area of the nanocomposite facilitated the faradaic and non-faradic charge storage mechanism. The r-GO matrix not only acted as a capacitive supplement but also facilitated the redox reaction because of its superior electrical conductivity. As the nanocomposite showed CV and CCD profiles in the negative potential window (−1 V to −0.53 V), therefore it has the potential to be used as a negative electrode material for hybrid supercapacitors applications. The observed results revealed the potential of the (MoS₂/r-GO) nanocomposite-based cathode for hybrid supercapacitor applications.     

Wet chemical synthesis of Gd+3 doped vanadium Oxide/MXene based mesoporous hierarchical architectures as advanced supercapacitor material

In this paper, Gd³⁺ doped V₂O₅/Ti₃C₂T_x MXene (GVO/MX) hierarchical architectures have been synthesized by wet chemical approach. As prepared GVO/MX composite, along undoped VO and unsupported GVO were well characterized by XRD, FESEM, EDX, FT-IR and BET techniques. Electrochemical performance of VO, GVO and GVO/MX was evaluated by CV, GCD and EIS measurements. Among the three electrodes, GVO/MX composite exhibited highest electrochemical activity with the optimum specific capacitance of 1024 Fg^-1 at 10 mVs^?1. The specific capacitance of GVO/MX was ～1.7 and ～3 times higher than unsupported GVO (585 Fg^-1) and VO (326 Fg^-1), respectively. The cyclic life of GVO/MX with capacitance retention 96.12% was observed at 60 mVs^?1. EIS measurements showed reduction in electrochemical impedance for GVO/MX as compared to GVO and VO. The corresponding impedance values of Rct and Resr for GVO/MX were calculated as 18 Ω and 1.8 Ω, respectively. The superior capacitive ability of GVO/MX can be ascribed to its unique morphology, short diffusion path and high surface area of fabricated composite. Considering it, the present work provides a feasible strategy to fabricate highly effective electrode materials for next generation energy storage devices.     

Synthesis of reduced graphene oxide/tungsten trioxide nanocomposite electrode for high electrochemical performance

A facile and well-controllable reduced graphene oxide/tungsten trioxide (rGO/WO₃) nanocomposite electrode was successfully synthesized via an electrostatic assembly route at 350 rpm for 24 h. In this study, hexagonal-phase WO₃ (h-WO₃) nanofiber was well distributed on rGO sheets by applying optimal processing parameters. The as-synthesized rGO/WO₃ nanocomposite electrode was compared with pure h-WO₃ electrode. A maximum specific capacitance of 85.7 F g⁻¹ at a current density of 0.7 A g⁻¹ was obtained for the rGO/WO₃ nanocomposite electrode, which showed better electrochemical performance than the WO₃ electrode. The incorporation of WO₃ into rGO could prevent the restacking of rGO and provide favourable surface adsorption sites for intercalation/de-intercalation reactions. The impedance studies demonstrated that the rGO/WO₃ nanocomposite electrode exhibited lower resistance because of the superior conductivity of rGO that improved ion diffusion into the electrode. To evaluate the contribution of WO₃ to the rGO/WO₃ nanocomposite, the influence of mass loading of WO₃ on the capacitance was investigated.     

Graphene/Polyaniline Aerogel with Superelasticity and High Capacitance as Highly Compression-Tolerant Supercapacitor Electrode

Superelastic graphene aerogel with ultra-high compressibility shows promising potential for compression-tolerant supercapacitor electrode. However, its specific capacitance is too low to meet the practical application. Herein, we deposited polyaniline (PANI) into the superelastic graphene aerogel to improve the capacitance while maintaining the superelasticity. Graphene/PANI aerogel with optimized PANI mass content of 63 wt% shows the improved specific capacitance of 713 F g^?1 in the three-electrode system. And the graphene/PANI aerogel presents a high recoverable compressive strain of 90% due to the strong interaction between PANI and graphene. The all-solid-state supercapacitors were assembled to demonstrate the compression-tolerant ability of graphene/PANI electrodes. The gravimetric capacitance of graphene/PANI electrodes reaches 424 F g^?1 and retains 96% even at 90% compressive strain. And a volumetric capacitance of 65.5 F cm^?3 is achieved, which is much higher than that of other compressible composite electrodes. Furthermore, several compressible supercapacitors can be integrated and connected in series to enhance the overall output voltage, suggesting the potential to meet the practical application.     

Facile Fabrication of Binder-Free CoZn LDH/CFP Electrode with Enhanced Capacitive Properties for Asymmetric Supercapacitor

CoZn layered double hydroxide (LDH) or Co(OH)₂ pseudocapacitive material has been prepared on the current collector of carbon fiber paper (CFP) using an eco-friendly one-step electrodeposition. Benefiting from its unique structural feature, the binder-free CoZn LDH/CFP electrode material realizes high specific capacitance of 1156 Fg^?1 at a current density of 1 Ag^?1 and excellent rate capability of 80% retention with 16 fold current density increment, which is much better than that of Co(OH)₂ (617 Fg^?1, 65%). Notably, the CoZn LDH/CFP can retain an outstanding electrochemical stability with a capacitance degradation of only 6% after 6000 charge–discharge cycles at 32 Ag^?1. Moreover, an asymmetric supercapacitor (ASC) using CoZn LDH/CFP as a positive electrode and AC/CFP as a negative electrode has been assembled. The ASC exhibits a superior energy density of 30.0 Whkg^?1 at a power density of 800 Wkg^?1 with a specific capacitance up to 84.4 Fg^?1 and a potential window wide to 1.6 V. These encouraging results indicate that CoZn LDH/CFP composite material has a great potential for next-generation energy conversion/storage devices.

     

Facile synthesis of graphene/polyaniline composite hydrogel for high-performance supercapacitor

The graphene/polyaniline (PANI) composite hydrogel was successfully prepared by a one-step hydrothermal method. The morphology and structure of the sample were characterized by digital camera, scanning electron microscopy, and Fourier transform infrared spectroscopy spectra. By combining the advantages of high conductivity of graphene and high pseudocapacitance of PANI, the composite hydrogel was taken as supercapacitor electrode material. Cyclic voltammetry and galvanostatic charge/discharge experimental results show that the composite has excellent electrochemical performance. The specific capacitance value is 258.5 F g^?1 at a scan rate of 2 mV s^?1 and the specific capacitance value is up to 307 F g^?1 at a current density of 0.2 A g^?1. The specific capacitance value can still maintain 90 % of the initial value after repeating the galvanostatic charge–discharge for 1000 cycles at a current density of 1.0 A g^?1 showing good cycle stability.     

CoO/rGO composite prepared by a facile direct-flame approach for high-power supercapacitors

In this study, CoO nanoparticles (NPs) measuring approximately 20?nm in size are successfully grown on reduced graphene oxide (rGO) layers through a facile direct-flame approach. The obtained CoO/rGO nanocomposites are applied as electrode materials and show a high specific capacitance, reaching 1615.0?F?g^?1 at a current of 1?A?g^?1 (737.5?F?g^?1 at 50?A?g^?1), and good cycling stability (88.12% retention after more than 15,000 cycles at 5?A?g^?1), which are outstanding characteristics compared with those of recently reported pseudosupercapacitors. Furthermore, an asymmetric supercapacitor (ASC) produced using CoO/rGO as a positive electrode material and activated graphene (AG) as a negative electrode achieves a high cell voltage of 1.6?V and delivers a maximum energy density of 62.46?Wh?kg^?1 at a power density of 1600?W?kg^?1. The fabrication technique is facile and represents a promising means of obtaining metal oxide/graphene composites for high-performance supercapacitors.