The synthesis of fulvic acid–thiourea amide derivates grafted polystyrene and its effect on the crystallization and performance of poly(lactic acid)

Fulvic acid–thiourea amide derivates (FA‐T) was synthesized via amidation with FA and thiourea, and its optimum reaction conditions were 7 h of reaction time, 1 wt% of sodium methylate, 130°C of reaction temperature, and 2 g of thiourea. Then, FA‐T grafted polystyrene (FA‐T‐PS) was synthesized by activators generated by electron transfer for atom transfer radical polymerization. Fourier transform infrared spectroscopy, static contact angle analysis, and X‐ray photoelectron spectroscopy confirmed that the synthesis of FA‐T‐PS. Then, poly(lactic acid)/FA‐T‐PS(PLA/FA‐T‐PS) composites were prepared by the melt blending with FA‐T‐PS as fillers. Mechanical test demonstrated that FA‐T‐PS increased the flexibility and ductility of PLA composites. Dynamic mechanical analysis revealed that FA‐T‐PS reduced friction and loss between PLA chain and filler, and further reformed had higher interfacial compatibility with PLA. Differential scanning calorimetric results and polarized optical microscopy analysis displayed that FA‐T‐PS had strong heterogeneous nucleation effect, which effectively enhanced the crystallization rate and the crystallinity of PLA. Friedman thermal decomposition kinetics presented that E _a of PLA/FA‐T‐PS (0.3 wt%) was increased by 52.94% compared with PLA, which demonstrated that FA‐T‐PS significantly enhanced the thermal stability of PLA. Therefore, FA‐T‐PS effectively improved the comprehensive performance of PLA. POLYM. ENG. SCI., 59:1787–1798, 2019. © 2019 Society of Plastics Engineers     

Preparation and performance of poly(lactic acid)/amidated ammonium citrate intercalated saponite nanocomposites

ABSTRACT

In this article, a novel method, amidation, was used to modify saponite. Amidated ammonium citrate intercalated saponite (Aa-saponite) was synthesized by amidation reaction. The structure of Aa-saponite was characterized by Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD), demonstrating that the saponite was successfully amidated. Polylactic acid/amidated ammonium citrate intercalated saponite nanocomposites (PLA/Aa-saponite) were prepared by melt blending. Mechanical tests demonstrated that the addition of Aa-saponite (0.3 wt%) improved the impact strength of PLA. A series of performance analysis results showed that A-saponite improved the comprehensive performance of PLA, such as mechanical, thermal stability, crystallization and rheological properties.     

Synthesis and thermal properties of telechelic poly(lactic acid) ionomers

Telechelic poly(lactic acid) (PLA) ionomers were synthesized using a chemical recycling process. A transesterification reaction between a commercial PLA and 2-hydroxyethyl methacrylate or ethylene glycol was used to produce a hydroxy-terminated PLA. The hydroxy-terminated PLA was then reacted with itaconic anhydride to produce terminal carboxylic acid groups, which were neutralized with appropriate metal acetates to produce Na-, Li-, K-, Zn-, Ca- and Y-ω- and α,ω-telechelic PLA ionomers. ¹H NMR spectroscopy was used to confirm the presence of the itaconic acid end-groups and FTIR spectroscopy was used to quantify the extent of neutralization. The addition of the ionic groups increased the glass transition (T_g), and T_g increased as the strength of the ion-pair increased. The ionic groups suppressed crystallinity, especially when multivalent cations were used.     

Non-isothermal crystallization kinetics of poly (lactic acid)/modified carbon black composite

A novel method was employed to modify the surface of carbon black (CB) by an organic small molecule in a Haake Rheomix mixer. Jeziorny equation, the Ozawa model and Mo equation were employed to describe the non-isothermal crystallization process of poly (lactic acid) (PLA), PLA/CB and PLA/modified carbon black (MCB) composites. It is found that the Ozawa model fail to describe the non-isothermal crystallization process for PLA and its composites, while Jeziorny equation and Mo’s theory provide a good fitting. The comparison of crystallization kinetics between PLA/MCB and PLA through Lauritzen–Hoffman model indicates that there appears a transition from regimes II to III in PLA and PLA/MCB. The fold surface free energy σ _e of PLA/MCB composite is higher than that of neat PLA, implying that the existence of nucleating agent is unfavorable for the regular folding of the molecule chain.     

Crystallization of poly(lactic acid) enhanced by phthalhydrazide as nucleating agent

The effect of phthalhydrazide compound on the nonisothermal and isothermal crystallization behavior of bio-based and biodegradable poly(lactic acid) (PLA) was investigated by differential scanning calorimetry and polarized optical microscopy. The nonisothermal melt crystallization of PLA started much earlier in the presence of phthalhydrazide even at a phthalhydrazide content as low as 0.1 wt%. The isothermal crystallization kinetics was analyzed by the Avrami model. It was found that the Avrami exponent of the PLA crystallization was not significantly influenced by the addition of phthalhydrazide, indicating that the crystallization mechanism almost did not change in the composites. The crystallization half-time of PLA/phthalhydrazide composites decreased significantly with increase in phthalhydrazide loading. The observation from optical microscopy showed that the presence of phthalhydrazide increased the number of nucleation sites. The above observations indicate that phthalhydrazide is an efficient nucleating agent of PLA.     

Study on flax fiber toughened poly (lactic acid) composites

Poly (lactic acid) (PLA) is a renewable and biodegradable polymer with high modulus, high strength but low toughness. Blending PLA with plant fiber has been believed an available strategy to improve the toughness of PLA. PLA/Flax composites were fabricated by extrusion and injection molding processes. The flax fiber surfaces were modified before blending to improve the compatibility, and the chemical structures of both untreated and treated fiber were characterized by Fourier transform infrared spectroscopy. Results of mechanical test showed that the impact strength and elongation at break of PLA/Flax composites were remarkably higher than PLA. The impact fractures of PLA/Flax composites were also observed by scanning electron microscope. The results showed uniform dispersion of fibers in PLA matrix and good compatibility between treated fibers and PLA matrix. Moreover, it can be observed that crazing propagation was hindered by fibers and transcrystalline developed along fibers by polarized optical microscope. Differential scanning calorimetry analysis was carried out to study the crystallinity of PLA and it was found that incorporation of fiber improved the crystallinity of PLA. The toughening mechanism of PLA/Flax composites was discussed according to the results. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42573.     

Incorporation of wheat starch and coupling agents into poly(lactic acid) to develop biodegradable composite

Abstract

Composites of poly (lactic acid) (PLA)/wheat starch and PLA/wheat starch/methyldiphenyldiisocyanate, were prepared and characterised in this study. The effects of incorporating different coupling agents on the physical properties and morphology of the composites were studied. Extrusion technology and injection moulding techniques were used to prepare standard tensile and impact test pieces. Tensometry was used to investigate the tensile properties of the composites and impact testing using falling weight technique was used to investigate impact strength. To investigate the thermal behaviour of the composites, differential scanning calorimetry was employed. Water absorption properties of the composites were also investigated. Scanning electron microscopy was used to investigate the morphology of the composites. Starch can be incorporated in a PLA matrix at 10% level without difficulty in processing by extrusion followed by injection moulding to make shaped mouldings in the presence of MDI. With 10% wheat starch and 2% MDI, blends of wheat starch/PLA can reach the tensile strength, elongation, impact strength properties of raw PLA. In the presence of 2% MDI and 10% glycerol, blends of PLA and starch make an entirely flexible material.     

Synthesis and properties of random poly(lactic acid)-based ionomers

A random poly(lactic acid), PLA, based ionomer was synthesized by copolymerizing a methacrylate-terminated PLA macromonomer and methyl methacrylate. The copolymerization kinetics were studied using ¹H NMR spectroscopy and the copolymer composition was characterized by ¹³C NMR spectroscopy. Carboxylic acid groups were introduced into the copolymer by reacting the hydroxyl end groups of the PLA macromonomer with succinic anhydride, and the acid groups were neutralized with metal acetates to produce Na-, Ca-, and Y-PLA ionomers. Significant increases in T_g were observed for the ionomers and thermomechanical analysis indicated that the ionomers were more resistant to penetration by a weighted probe and an apparent rubbery plateau was observed above T_g. The ionomers were more hydrophilic than PLA, but relatively low water absorption could be achieved for the Ca²⁺-salt ionomer.     

Crystallization of amorphous poly(lactic acid) induced by organic solvents

Crystallization of amorphous poly(lactic acid) (PLA) was investigated in various organic solvents, such as acetone, ethylacetate, diethylether, tetrahydrofurane, methanol, hexane, toluene, xylene, and o‐dichlorobenene. Most of the solvents, except hexane, induced crystallization of amorphous PLA. Acetone was the most effective solvent to accelerate the crystallization among the solvents used. The crystallization was induced by permeation of acetone into the amorphous phase of PLA, and the permeation obeyed Fick type diffusion. The crystallization rate increased with increasing of conducting temperature. Crystallized PLA formed α crystalline structure. The permeated acetone in the crystallized PLA gradually evaporated as time passes, and the elimination of acetone affected thermal and mechanical properties of the crystallized PLA. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Crystallization,mechanical properties,and enzymatic degradation of biodegradable poly(ε‐caprolactone) composites with poly(lactic acid) fibers

Biodegradable polymer composites based on poly(ɛ‐caprolactone) (PCL) and poly(lactic acid) (PLA) fibers were prepared by melt compounding. The effects of PLA fibers on the crystallization, mechanical properties, and enzymatic degradation of PCL composites were investigated. The addition of PLA fibers enhanced the crystallization of PCL due to the heterogeneous nucleation effect of fibers. However, the final crystallinity of the PCL in the composites was little changed in the presence of PLA fibers. With the addition of PLA fibers, significant improvement in storage modulus (E′) of PCL in the composites was achieved. A significant increase in E′ was 173% for the composites as compared to that of the neat PCL at 20°C. With the increase in PLA fibers content, the PCL composites showed decreased elongation and strength at break; however, the tensile yield strength and modulus were increased significantly, indicating that PCL was obviously reinforced by adding PLA fibers. Although the PLA fibers retarded the enzymatic degradation of PCL, it was possible to be completely degraded without much degradation time for PCL blending with suitable amounts of PLA fibers. POLYM. COMPOS., 34:1745–1752, 2013. © 2013 Society of Plastics Engineers     

Effect of nanosilver on the photodegradation of poly(lactic acid)

The poly(lactic acid), PLA, mixed with nanosilver in solution easily forms nanocomposite in solid state (after solvent evaporation), which was proved by UV–Vis spectroscopy. This work focuses on photodegradation occurring in PLA films doped with nanosilver. The changes in chemical structure of photodegraded PLA has been determined using FTIR spectroscopy. Differential scanning calorimetry of UV‐irradiated PLA samples provided information on polymer glass transition and crystallization/melting processes. It was found that PLA alone is more sensitive to photodegradation than PLA/silver nanocomposites. The mechanism of nanocomposite photodegradation and effect of nanosilver was discussed. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40144.     

Chitosan/poly(lactic acid) blends as drug delivery systems

Abstract

The immobilization and controlled release of salicylic acid (SA) in chitosan/poly(lactic acid) (Ch/LA) blends were studied in the present work. The Ch/PLA bland’s morphology was studied by SEM. FT-IR and DSC were used to investigate the interactions between the polymer matrix and the SA. The SA release kinetics was interpreted by the Weibull and Higuchi models. The SA release was the fastest in Ch/PLA systems with inhomogeneous and porous structure. It was slower in neat PLA matrix due to its dense structure and hydrophobic behavior, and in neat chitosan matrix, because of specific electrostatic chitosan/SA interactions and complex formation.     

茶粉/聚乳酸复合材料的增韧改性

为高值化利用茶产业剩余物资源,以茶粉（TD）为生物质填料,聚乳酸（PLA）为基体,以甘油（GL）、聚乙二醇400（PEG400）、环氧大豆油（ESO）和乙酰柠檬酸丁酯（ATBC）为增塑剂,制备了可降解TD/PLA增韧复合材料,并采用红外吸收光谱、热重分析、转矩流变仪、扫描电镜及力学性能测试等考察了增塑剂对TD/PLA复合材料结构与性能的影响。结果表明：4种增塑剂都可改善TD/PLA复合材料的加工流变性,GL的添加不利于复合材料韧性,PEG、ATBC及ESO的添加提高了复合材料韧性,其中ESO增韧效果最佳,其添加制备的复合材料断裂伸长率及缺口冲击强度分别提高了154.23%和65.53%,GL增韧效果最差,ATBC增韧后复合材料力学强度和模量最高。FTIR分析表明,ATBC和ESO可与PLA发生一定相互作用,使C-O键红外吸收峰位增大,其增韧后复合材料吸水率下降。ESO添加提高了TD/PLA复合材料的维卡软化点和热稳定性。SEM图片显示,TD/PLA/ESO复合材料断面粗糙,ESO分散较均匀,与PLA部分相容,而TD/PLA/GL复合材料断面出现严重相分离结构。该研究结果可为进一步探索聚乳酸基茶塑复合材料制备及应用提供试验数据和理论参考。     

A novel phosphorus-containing poly(lactic acid) toward its flame retardation

An inherently flame-retardant poly(lactic acid) (PLA) was synthesized via the chain-extending reactions of dihydroxyl terminated pre-poly(lactic acid) (pre-PLA), which was synthesized by direct polycondensation of l-lactic acid using 1,4-butanediol as initiator and stannous chloride (SnCl₂) as catalyst, using ethyl phosphorodichloridate as chain extender. The resulting phosphorus-containing poly(lactic acid) (PPLA) was characterized by gel permeation chromatography (GPC), ¹H and ³¹P nuclear magnetic resonance (¹H, ³¹P NMR) and homonuclear correlation spectroscopy (COSY) and inductively coupled plasma-mass (ICP). A comprehensive flame retardant property of PPLA was evaluated by microscale combustion calorimetry (MCC), limiting oxygen index (LOI), vertical burning test (UL-94) and cone calorimeter test (CCT). PPLA has excellent flame retardancy and also can be used as a flame retardant for commercial PLA. Only 5 wt.% of PPLA added into PLA can obtain good flame retardant properties. As the content of PPLA is further increased to 10 wt.%, PLA can have much better flame retardancy (LOI = 35 and UL-94 V-0 rating), lower peak heat release rate (pHRR) and longer ignition time (TTI) than neat PLA. All those results mean that this novel approach to impart flame retardancy to PLA is very effective.     

Utilization of linseed cake as a postagricultural functional filler for poly(lactic acid) green composites

Linseed cake (LC), a byproduct of linseed oil extraction, is used as a functional filler for production of biodegradable composites. To determine the influence of residual linseed crude oil contained in lignocellulosic filler on the properties of the poly(lactic acid) (PLA)-based composites with 5–30% filler content, two types of LC were analyzed: a defatted and an unmodified one. Complex analysis of the composites' properties change was conducted in relation to their structure modification caused by the addition of a waste filler. It was found that the addition of LC resulted in simultaneous plasticization and improved crystallization of PLA. Lignocellulosic particles and crude linseed oil contained in the LC powder provided a modifying effect, influencing the level of crystallinity and mechanical and thermomechanical properties. Using LC may thus overcome one of the main drawbacks of PLA, which is brittleness and low crystallinity. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47152.     

Surface modification of cellulose nanofibrils for poly(lactic acid) composite application

3-Methacryloxypropyltrimethoxysilane (MEMO) was used to modify the surface of cellulose nanofibrils (CNF) to improve the interfacial adhesion between the hydrophilic CNF and the hydrophobic poly(lactic acid) (PLA). MEMO modified CNF (M-CNF) were characterized by means of Fourier transform infrared spectroscopy (FTIR), thermo gravimetric analysis (TGA), and atomic force microscope (AFM). Testing thin films with good transparency were obtained by casting the DMAC solutions of the composites onto glass plates and evaporating the solvent at 80°C. PLA/M-CNF composites were tested by tensile testing, scanning electron microscope (SEM), and AFM. The effect of MEMO and CNF on performance of PLA was investigated. The FTIR analysis successfully showed that coupling reaction has been successfully occurred and the hydroxyl groups of MEMO are strongly hydrogen bonded to that of CNF. The thermal stability of M-CNF was little decreased. The M-CNF kept their morphological integrity. The highest tensile strength of composites was obtained for PLA with 1.0% v/v MEMO and 1.0 wt % CNF. M-CNF disperse well and cross with each other in the PLA matrix. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Evaluation of the mercury ions adsorption capacity of copper-based metal-organic frameworks/poly (lactic acid) composites

ABSTRACT

The copper-based metal-organic frameworks (Cu-MOFs) was synthesized via the hydrothermal method and modified by 1,2-ethanedithiol. Then the Cu-MOFs/poly (lactic acid) (PLA) composites with various components were prepared by the melt blending extrusion and characterized. Their mercury ions (Hg²⁺) adsorption capacity was evaluated. Cu-MOFs could be dispersed well in PLA matrix. The glass transition temperature, crystalline temperature and melting temperature of the composites were increased as a result of the addition of Cu-MOFs. The thermal stability and crystallinity of the composites slightly improved. The Hg²⁺ adsorption efficiency of the composites enhanced with the increasing of Cu-MOFs content.     

Improving the flame retardance and melt dripping of poly(lactic acid) with a novel polymeric flame retardant of high thermal stability

A polymeric flame retardant containing phosphorus and nitrogen (PCNFR) was synthesized and characterized by Fourier transform infrared spectroscopy, nuclear magnetic resonance and gel permeation chromatography. The thermal decomposition temperatures at 10% weight loss (T_{10 wt%}) of PCNFR were around 358 °C, and the char yield at 600 °C reached about 60 wt% both in nitrogen and air by thermogravimetric analysis. The flame retarded poly(lactic acid) (PLA) composites with PCNFR were prepared. The thermogravimetric analysis results showed that PCNFR could improve the thermal stability of the flame retarded PLA composites with low loading (≤10 wt%) and at high temperature zone (≥390 °C). The condensed products from the decomposition of the flame retarded composites at 380 °C and 450 °C for different intervals were analyzed by Raman spectroscopy, and the results showed that time and temperature influenced the structure of the char residue evidently. When incorporating 30 wt% PCNFR into PLA, the limited oxygen index of the flame retarded composites reached 25.0%, and V‐0 rating was achieved. The char residues were analyzed by scanning electron microscopy, Fourier transform infrared spectroscopy and X‐ray photoelectron spectroscopy in detail. Copyright © 2016 John Wiley & Sons, Ltd.     

Borassus powder-reinforced poly(lactic acid) composites with improved crystallization and mechanical properties

This article reports on the development of biocomposites based on polylactic acid (PLA) and borassus powder. Borassus powder was treated with alkali to remove hemicelluloses and lignin. The treated borassus improved the homogeneous mixing with PLA and increased the crystallinity of PLA. Dispersibility of the borassus was studied by scanning electron microscopy (SEM) and X-ray MicroCT. PLA/borassus composites were prepared by melt mixing of PLA with 5, 10, and 15 wt % treated/untreated borassus. Composites were examined for mechanical properties and crystallization. Composites showed enhanced tensile strength compared to neat PLA. The PLA/treated borassus powder composites displayed higher crystallinity than PLA. The isothermal cold crystallization study showed increase in the crystallization rate of PLA in the presence of treated borassus. The spherulitic growth was studied using polarized optical microscopy. The enhanced performance of the PLA-borassus composites was observed in the presence of borassus. This study demonstrates that the PLA-borassus composites show great promise for bioplastics applications. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47440.     

Synergistic effects of polyethylene glycol and organic montmorillonite on the plasticization and enhancement of poly(lactic acid)

Poly(lactic acid) (PLA)/polyethylene glycol (PEG)/organic montmorillonite (OMMT) composites were prepared by melt blending, and their mechanical, rheological behavior, crystalline behavior, and thermal stability were investigated. Results showed that the elongation-at-break and notch-impact strength of PLA/15PEG/1.5OMMT were 466.45% and 4.34 kJ m⁻², respectively, which were nearly 42 and 2 times higher than those of PLA, respectively. The elongation-at-break of PLA/15PEG/1.5OMMT was also 33 times higher than that of PLA/15PEG and 30 times that of PLA/1.5OMMT. With addition of PEG, PLA chains could insert to OMMT effectively and increase the layer space of OMMT. The characteristics of dynamic behavior and fracture morphology showed that the plasticizer PEG could soften the PLA matrix, leading to easy plastic deformation. OMMT was well distributed in the PLA matrix and able to transfer the stress of external forces, thereby contributing to the matrix yielding initiation and expansion of polymer composites. The synergistic effect of OMMT and PEG was determined by studying the mechanical properties of PLA/PEG/OMMT composite. Differential scanning calorimetry and thermogravimetry studies revealed that OMMT as a nucleating agent improved crystallization and thermal stability. Thus, the synergistic effect of OMMT and PEG balanced the stiffness and toughness of PLA. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47576.