Risk-averse based optimal operational strategy of grid-connected photovoltaic/wind/battery/diesel hybrid energy system in the electricity/hydrogen markets

The techno-economic advantages of grid-connected hybrid energy system (HES) exploit synergies to improve reliability and economic efficiency while maintaining grid stability. Therefore, this paper proposes a risk-averse optimal operational strategy of grid-connected photovoltaic/wind/battery/diesel HES to participate into two energy markets including electricity and hydrogen markets. The grid company can flexibly trade power into two markets to maximally achieve profits based on price arbitrage. The risk influences of the uncertainties, i.e., photovoltaic/wind generation, and electricity prices on the expected revenue are evaluated with CVaR model. For a better exhibition of seasonal variability effects on HES optimal operation strategy, two typical Spring/Summer days are chosen. The proposed risk-averse optimal operational strategy is formulated as a two-stage mixed-integer linear programming (MILP) model. The results in a Spring day simulation under non-risk situation indicate that the overall expected revenue can be improved 2.74 times larger if considering hydrogen market. Moreover, the optimal operational strategy of hydrogen production is considerably affected by unpredictable wind farm. Sensitivity analysis also validates that the changes of PV/WT curtailment penalty have a profound influence than battery degradation coefficient on the HES expected revenue.     

Optimization of operational cost for a grid-supporting PV system with battery storage

Coupling an energy storage to a photovoltaic (PV) system not only increases the self-consumption but also solves the over-voltage issues if the cycling of the storage is properly controlled. Whatever the application the storage is used for, the primary concern of the system owner is to maximize the profits. Therefore, this paper addresses an energy management system for a PV system coupled with battery energy storage, which maximizes the daily economic benefits while curtailing the power injection to the grid in such a way that helps to mitigate over-voltage problems caused by reverse power flow. A time dependent grid feed-in limit is proposed achieve this objective. The daily operational cost that includes the energy cost and the battery degradation cost is considered as the objective function. The non-linear constrained optimization problem is solved using dynamic programming. The analyses are made to investigate the economic benefits of charging the battery from the grid. It is found that there is a possibility for these systems for participating in load-levelling if batteries are charged from the PV system. In order for that to be feasible, the peak-hour sell-back price for the energy from storage should be higher than the off-peak utility electricity price.     

Optimal operation of DC smart house system by controllable loads based on smart grid topology

From the perspective of global warming mitigation and depletion of energy resources, renewable energy such as wind generation (WG) and photovoltaic generation (PV) are getting attention in distribution systems. Additionally, all-electric apartment houses or residence such as DC smart houses are increasing. However, due to the fluctuating power from renewable energy sources and loads, supply-demand balancing of power system becomes problematic. Smart grid is a solution to this problem. This paper presents a methodology for optimal operation of a smart grid to minimize the interconnection point power flow fluctuation. To achieve the proposed optimal operation, we use distributed controllable loads such as battery and heat pump. By minimizing the interconnection point power flow fluctuation, it is possible to reduce the electric power consumption and the cost of electricity. This system consists of photovoltaic generator, heat pump, battery, solar collector, and load. To verify the effectiveness of the proposed system, results are used in simulation presented.     

Operational performance of energy storage as function of electricity prices for on-grid hybrid renewable energy system by optimized fuzzy logic controller

Realization of benefits from on-grid distributed generation based on renewable energy sources requires employment of energy storage to overcome the intermittency in power generation by such sources, while accounting for time-varying electricity prices. The objective of this study is to examine the effects of time-varying electricity prices on the performance of energy storage components for an on-grid hybrid renewable energy system (HRES) utilizing an optimized fuzzy logic controller (FLC). To achieve the objective, FLC membership functions are optimized for minimizing the operational cost of the HRES based on weekly and daily prediction of data for grid electricity price, electrical load, and environmental parameters, including wind speed, solar irradiation, and ambient temperature, using shuffled frog leap algorithm. FLC three inputs include (a) grid electricity price, (b) net power flow as the difference between energy produced and energy consumed, and (c) state of charge (SOC) of battery stack. It is confirmed that accounting for grid electricity price has considerable effects on the performance of energy storage components for operation of on-grid HRES, as the weekly and daily optimized FLCs result in less working hours for fuel cell and electrolyzer and less fluctuations in SOC of battery stack.     

光储微网的储能优化配置与技术经济分析

在储能系统和光伏发电相结合的统筹规划中,电池储能投资成本、光伏装机容量、光伏并网价格以及热电联产(CHP)的采用对电池储能的容量配置和电池充放电策略具有显著影响。基于分时电价下的光伏储能系统,将电池储能的容量和功率的配置转化为根据电价时段划分的约束优化问题。以某工业园区为研究对象,建立光伏-储能系统功率流模型,优化计算得到经济效益最优化的电池容量和功率配置结果及电池充放电策略。基于内部收益率、光伏自我消纳率等指标,根据光伏上网价格和电网谷段电价的关系划分场景,通过光伏发电容量和电池价格的变化探究光伏-储能系统中电池储能的容量配置、经济效益的变化规律和热电联产对系统的影响。     

Electricity storage for grid-connected household dwellings with PV panels

Classically electricity storage for PV panels is mostly designed for stand-alone applications. In contrast, we focus in this article on houses connected to the grid with a small-scale storage to store a part of the solar power for postponed consumption within the day or the next days. In this way the house owner becomes less dependent on the grid and does only pay for the net shortage of his energy production. Local storage solutions pave the way for many new applications like omitting over-voltage of the line and bridging periods of power-line black-out. Since 2009 using self-consumption of PV energy is publicly encouraged in Germany, which can be realised by electric storage.This paper develops methods to determine the optimal storage size for grid-connected dwellings with PV panels. From measurements in houses we were able to establish calculation rules for sizing the storage. Two situations for electricity storage are covered: - the storage system is an optimum to cover most of the electricity needs; - it is an optimum for covering the peak power need of a dwelling.After these calculation rules a second step is needed to determine the size of the real battery. The article treats the aspects that should be taken into consideration before buying a specific battery like lead-acid and lithium-ion batteries.     

Design of hybrid power-to-power systems for continuous clean PV-based energy supply

The increasing penetration of intermittent renewable sources, fostering power sector decarbonization, calls for the adoption of energy storage systems as an essential mean to improve local electricity exploitation, reducing the impact of distributed power generation on the electric grid. This work compares the use of hydrogen-based Power-to-Power systems, battery systems and hybrid hydrogen-battery systems to supply a constant 1 MW_el load with electricity locally generated by a photovoltaic plant. A techno-economic optimization model is set up that optimizes the size and annual operation of the system components (photovoltaic field, electrolyzer, hydrogen storage tanks, fuel cell and batteries) with the objective of minimizing the annual average cost of electricity, while guaranteeing an imposed share of local renewable self-generation. Results show that, with the present values of investment costs and grid electricity prices, the installation of an energy storage system is not economically attractive by itself, whereas the installation of PV panels is beneficial in terms of costs, so that the baseline optimal solution consists of a 4.2 MW_p solar field capable to self-generate 33% of the load annually. For imposed shares of self-generation above 40%, decoupling generation and consumption becomes necessary. The use of batteries is slightly less expensive than the use of hydrogen storage systems up to a 92% self-generation rate. Above this threshold, seasonal storage becomes predominant and hybrid storage becomes cheaper than batteries. The sale of excess electricity is always important to support the plant economics, and a sale price reduction sensibly impacts the results. Hydrogen storage becomes more competitive when the need for medium and long terms energy shift increases, e.g. in case of having a cap on the available PV capacity.     

Development of a renewable hydrogen economy: Optimization of existing technologies

There is an increasing need for new and greater sources of energy for future global transportation applications. One recognized possibility for a renewable, clean source of transportation fuels is solar radiation collected and converted into useable forms of electrical and/or chemical (hydrogen) energy. This paper describes methods for utilizing and combining existing technologies into systems that optimize solar energy collection and conversion into useful transportation fuels. Photovoltaic (PV)-electrolysis (solar hydrogen) and PV-battery charging systems described in this paper overcome inefficiencies inherent in past concepts, where DC power from the PV system was first converted to AC current and then used to power electrical devices at the point of generation, or fed back to the grid to reduce electricity costs. These past, non-optimized concepts included efficiency losses in power conversion and unnecessary costs. These drawbacks can be avoided by capitalizing on the unique feature of solar photovoltaic devices that match their maximum power point to the operating point of an electrolyzer or a battery charger without intervening power transformers. This concept is illustrated for two systems designed, built, and tested by General Motors for fueling a fuel cell electric vehicle and charging an automotive propulsion battery. Based on this research, we propose a scenario in which individual home-owners, businesses, or sites at remote locations with no grid electricity, can capture solar energy, store it as hydrogen generated via water electrolysis, or as electrical energy used to charge storage batteries. Such a decentralized energy system provides a home refueling option for drivers who only travel limited distances each day.     

Distributed generation integrated with thermal unit commitment considering demand response for energy storage optimization of smart grid

This paper deals with an optimal battery energy storage capacity for the smart grid operation. Distributed renewable generator and conventional thermal generator are considered as the power generation sources for the smart grid. Usually, a battery energy storage system (BESS) is used to satisfy the transmission constraints but installation cost of battery energy storage is very high. Sometimes, it is not possible to install a large capacity of the BESS. On the other hand, the competition of the electricity market has been increased due to the deregulation and liberalization of the power market. Therefore, the power companies are required to reduce the generation cost in order to maximize the profit. In this paper, a thermal units commitment program considers the demand response system to satisfy the transmission constraints. The BESS capacity can be reduced by the demand response system. The electric vehicle (EV) and heat pump (HP) in the smart house are considered as the controllable loads of the demand side. The effectiveness of the proposed method is validated by extensive simulation results which ensure the reduction of BESS capacity and power generation cost, and satisfy the transmission constraints.     

The world's largest all-vanadium redox flow battery energy storage system for a wind farm

风力发电具有明显的随机性,间歇性,不可控性和反调峰特性,风力发电的大规模并网给电网调峰和稳定,安全运行带来了巨大压力,造成弃风限电现象愈加严重,严重影响了风力资源的有效利用和经济效益.全钒液流电池储能电站在能量管理系统的调度下,对风力发电输出功率进行平滑,配合风电场功率预报系统,提高风电场跟踪计划发电能力,改善了风电场并网电能质量,降低了对电网的冲击与影响,同时也提高了风电场输出功率可控性,有利于提高电网对风电的接纳能力.国电龙源卧牛石风电场配套的5 MW/10 MW∙h全钒液流电池储能系统为目前世界上最大规模的全钒液流电池储能系统.本文介绍了该全钒液流电池技术特点和储能系统的设计,成组方案及功能,并对储能技术在可再生能源发展中的作用进行了展望.     

光伏空气源热泵的研究与开发

基于中国北方地区冬季采暖"煤改电"工程中使用的空气源热泵机组,提出与光伏发电相结合的系统方案.在不改变原有系统结构和控制方式的前提下,白天采用光伏优先、市电保障的双电源供电模式,研究将光伏电能高效注入系统的控制策略,优化光伏阵列容量配置,开发控制器样机.实验结果表明,系统运行稳定,在华北地区光伏阵列的最优容量配置约为系...     

风光联合发电系统的储能容量优化配置方法

随着可再生能源大规模接入电网,风力发电和光伏发电的不稳定性威胁着电网的安全稳定运行。储能系统作为一种可调度的能源,可实现可再生能源输出功率的平滑输出。通过分析风光联合发电系统输出功率特性,提出采用平抑指标和平滑效果评价指标对比分析滑动平均法和最小二乘法滤波效果,用于确定蓄电池储能配置的参考输出功率。在获得平滑后的功率曲线后,根据提出的曲线局部平滑指标和总体平滑指标,综合考虑蓄电池投资成本和平滑效果优化配置储能容量。最后,采用某地区实际的风光资源历史数据,验证了所提方法的可行性。     

Photovoltaic grid stabilization system using second life lithium battery

The operation of residential solar photovoltaic arrays are typically dependent on net energy metering (NEM) tariffs or feed in tariffs that allow the array owner to treat the electricity grid as an energy storage device. This study presents a model and simulation results of a photovoltaic array paired with a second life battery pack, a partially degraded lithium battery pack from an automotive application, for stabilizing the electricity grid interactions of residential photovoltaic systems and reducing the overall residential demand placed on the electricity grid. Two numerical simulations are performed on the operation of a second life battery pack. The first used an equivalent system model for the battery pack and measured solar production and residential loads to evaluate the system performance using one second time steps. The second model used hourly time steps and round trip efficiency for the battery, coupled with weather data and residential demand, to determine the system performance over the course of a year. The numerical investigation shows that the PV and battery system can substantially reduce the quantity of solar electricity that is exported to the distribution grid and decrease the impacts of sudden fluctuations in photovoltaic output due to cloud cover while providing significant reductions in the electricity demand placed on the grid. Copyright © 2015 John Wiley & Sons, Ltd.     

Solar energy storage in German households: profitability,load changes and flexibility

The developments of battery storage technology together with photovoltaic (PV) roof-top systems might lead to far-reaching changes in the electricity demand structures and flexibility of households. The implications are supposed to affect the generation mix of utilities, distribution grid utilization, and electricity price. Using a techno-economic optimization model of a household system, we endogenously dimension PV system and stationary battery storage (SBS). The results of the reference scenario show positive net present values (NPV) for PV systems of approx. 500–1,800 EUR/kW_p and NPV for SBS of approx. 150–500 EUR/kWh. Main influences are the demand of the households, self-consumption rates, investment costs, and electricity prices. We integrate electric vehicles (EV) with different charging strategies and find increasing NPV of the PV system and self-consumption of approx. 70%. With further declining system prices for solar energy storage and increasing electricity prices, PV systems and SBS can be profitable in Germany from 2018 on even without a guaranteed feed-in tariff or subsidies. Grid utilization substantially changes by households with EV and PV-SBS. We discuss effects of different incentives and electricity tariff options (e. g. load limits or additional demand charges). Concluding, solar energy storage systems will bring substantial changes to electricity sales.     

Achieving very high PV penetration – The need for an effective electricity remuneration framework and a central role for grid operators

This article proposes that optimally deployed solutions to the intermittency introduced by high penetration solar – e. g., electrical storage, optimized curtailment and demand response – could affordably transform solar power generation into the firm power delivery system modern energy economies require, thereby enabling very high solar penetration and the displacement of conventional power generation. The optimal deployment of these high-penetration-enabling solutions imply the existence of a healthy power grid, and therefore imply a central role for utilities and grid operators.This article also proposes that a value-based electricity compensation mechanism (based on e.g., Value of Solar (VOS) and load shaping tariffs), recognizing the multi-facetted, penetration-dependent value and cost of solar energy, and capable of shaping consumption patterns to optimally match resource and demand, could be an effective vehicle to enable high solar penetration and deliver affordable firm power generation.     

基于动态运行策略的太阳能分布式供能系统设计运行联合优化

提出将光伏剩余电量按照可变比例分配给储能电池及市政电网的动态运行策略,建立基于该策略的并网太阳能分布式供能系统设计运行联合优化模型,在不同分时电价下基于遗传算法对模型寻优,并将动态运行策略与对照运行策略（剩余电量优先并网或优先分配储能电池）下的系统运行结果进行比较分析。以陕西某乡村典型民居建筑为例进行分析,结果表明：1）分时电价的峰谷价差较大时,动态运行策略可有效降低太阳能分布式供能系统成本;2）分时电价的峰谷价差对于动态运行策略下储能电池的容量配置具有较大影响：峰谷价差越大,储能电池的配置容量越大;3）光伏度电补贴对3种运行策略下的系统成本影响程度为：动态运行策略>策略B（剩余电量优先分配储能电池）>策略A（剩余电量优先并网）。     

Design of a grid-connected PV system with hybrid energy storage

由于国内的储能技术起步较晚,分布式电源中应用单一储能介质很难满足系统运行要求.基于某公司的光伏储能并网系统示范项目,以具有快速响应特性的超级电容器和具有大容量储能特性的锂离子电池为混合储能系统,以储能控制器为控制核心统一协调控制,使电能以可控功率按需送入电网.该系统可有效提高储能系统的功率输出能力,优化储能系统的充放电过程,延长储能电池的使用寿命,具有良好的应用及推广价值.     

Hybridization strategies of power-to-gas systems and battery storage using renewable energy

In this paper, the hybrid concept to use renewable electricity to produce hydrogen with an electrolyser in combination with a battery is introduced and analysed. This hybrid system opens the possibility to optimise operation and to increase operation times of the system and thus to improve the techno-economic performance. To analyse the performance, a model has been developed, which designs and operates a single or hybrid power-to-gas system in a cost optimal manner. The underlying method is a mixed integer linear programming (MILP) approach, which minimises total system costs. The cost optimisation modelling is performed by a case study for a hybrid electrolyser/battery system directly coupled with a large PV power plant without grid connection. The results show, that batteries can support electrolyser operation in a reasonable way. This is however associated with higher hydrogen production costs and not competitive compared to the installation of additional electrolyser capacity or curtailment of electricity.     

PV self-consumption optimization with storage and Active DSM for the residential sector

With the rising prices of the retail electricity and the decreasing cost of the PV technology, grid parity with commercial electricity will soon become a reality in Europe. This fact, together with less attractive PV feed-in-tariffs in the near future and incentives to promote self-consumption suggest, that new operation modes for the PV Distributed Generation should be explored; differently from the traditional approach which is only based on maximizing the exported electricity to the grid. The smart metering is experiencing a growth in Europe and the United States but the possibilities of its use are still uncertain, in our system we propose their use to manage the storage and to allow the user to know their electrical power and energy balances. The ADSM has many benefits studied previously but also it has important challenges, in this paper we can observe and ADSM implementation example where we propose a solution to these challenges. In this paper we study the effects of the Active Demand-Side Management (ADSM) and storage systems in the amount of consumed local electrical energy. It has been developed on a prototype of a self-sufficient solar house called “MagicBox” equipped with grid connection, PV generation, lead-acid batteries, controllable appliances and smart metering. We carried out simulations for long-time experiments (yearly studies) and real measures for short and mid-time experiments (daily and weekly studies). Results show the relationship between the electricity flows and the storage capacity, which is not linear and becomes an important design criterion.