热等静压对钛不锈钢焊接接头组织性能的影响

TA2/316L爆炸焊接试样在压力150 MPa,温度850 ℃条件下热等静压处理2 h,分别对爆炸态和热等静压态焊接接头进行了抗剪强度测试,重点对比研究了热等静压处理对焊接接头组织形貌、化学成分分布及脆性相的影响.热等静压处理后,原爆炸态接头附近的缺陷被治愈,Ti,Cr,Fe,Ni等元素的相互扩散距离明显增加,但接头中生成的脆性相也增加.结果表明,爆炸态的剪切试样断裂于TA2侧,热等静压态断裂于金属间化合物相.     

热等静压扩散连接CuAgZn/GH909接头组织及力学性能

通过热等静压-扩散连接工艺直接连接CuAgZn和GH909,利用扫描电镜(SEM)、能谱仪(EDS)和X射线衍射仪(XRD)观察接头的显微组织和成分,并通过测试显微硬度和剪切强度研究接头的力学性能.结果表明,CuAgZn/GH909结合界面紧密完整,接头密实、均匀,无未连接的缺陷.接头的最大显微硬度为HV 443,高于...     

Diffusion behavior of Nb element in high Nb containing TiAl Alloys by reactive hot pressing

Diffusion behavior of Nb in elemental powder metallurgy high Nb containing TiAl alloys was investigated. The results show that Nb element dissolves into the matrix by diffusion. Pore nests are formed in situ after Nb diffusion. With the increase in hot pressing temperature, the diffusion of Nb will be more sufficient, and the microstructure is more homogeneous. Nb element diffuses completely at 1400℃. Meanwhile, compression deformation and agglomeration phenomena of pores are observed in some pore nests. Hot isostatic pressing （HIP） treatment can only efficiently decrease but not eliminate porosity completely.