Chemical Synthesis and Structure of the Prokineticin Bv8

Bv8, a 77‐residue protein isolated from frogs, is the prototypic member of the prokineticin family of cytokines. Prokineticins (PKs) have only recently been identified in vertebrates (including humans), and they are believed to be involved in a number of key physiological processes, such as angiogenesis, neurogenesis, nociception, and tissue development. We used a combination of Boc solid‐phase peptide synthesis, native chemical ligation, and in vitro protein folding to establish robust chemical access to this molecule. Synthetic Bv8 was obtained in good yield and exhibited full activity in a human neuroblastoma cell line and rat dorsal root ganglion (DRG) neurons. The 3D structure of the synthetic protein was determined by using NMR spectroscopy and it was found to be homologous with that of mamba intestinal toxin 1, which is the only other known prokineticin structure. Analysis of a truncated mutant lacking five residues at the N terminus that are critical for receptor binding and activation showed no perturbation to the core protein structure. Together with the functional data, this suggests that receptor binding is likely to be a highly cooperative process possibly involving major allosterically driven structural rearrangements. The facile and efficient synthesis presented here will enable preparation of unique chemical analogues of prokineticins, which should be powerful tools for modulating the structure and function of prokineticins and their receptors, and studying the many physiological processes that have been linked to them.     

The potential of P1 site alterations in peptidomimetic protease inhibitors as suggested by virtual screening and explored by the use of C-C-coupling reagents

A synthetic concept is presented that allows the construction of peptide isostere libraries through polymer-supported C-acylation reactions. A phosphorane linker reagent is used as a carbanion equivalent; by employing MSNT as a coupling reagent, the C-acylation can be conducted without racemization. Diastereoselective reduction was effected with L-selectride. The reagent linker allows the preparation of a norstatine library with full variation of the isosteric positions including the P1 side chain that addresses the protease S1 pocket. Therefore, the concept was employed to investigate the P1 site specificity of peptide isostere inhibitors systematically. The S1 pocket of several aspartic proteases including plasmepsin II and cathepsin D was modeled and docked with approximately 500 amino acid side chains. Inspired by this virtual screen, a P1 site mutation library was designed, synthesized, and screened against three aspartic proteases (plasmepsin II, HIV protease, and cathepsin D). The potency of norstatine inhibitors was found to depend strongly on the P1 substituent. Large, hydrophobic residues such as biphenyl, 4-bromophenyl, and 4-nitrophenyl enhanced the inhibitory activity (IC50) by up to 70-fold against plasmepsin II. In addition, P1 variation introduced significant selectivity, as up to 9-fold greater activity was found against plasmepsin II relative to human cathepsin D. The active P1 site residues did not fit into the crystal structure; however, molecular dynamics simulation suggested a possible alternative binding mode.     

Preparation of polypropylene/octadecane composite films and their use in the packaging of cherry tomatoes

Polypropylene (PP)/octadecane (OD) composite films were prepared via twin‐screw extrusion, and their chemical, morphological, thermal, and surface properties and oxygen and water vapor permeabilities were analyzed as functions of the OD content and temperature. OD was dispersed well in the PP matrix, and two phases (i.e., the PP and OD portions) were present in the PP/OD composite films. When the temperature was increased from 10 to 30 °C, both the oxygen transmittance rate and the water vapor transmittance rate of the PP/OD composite films increased sharply because of the influence of the OD content. These results were related to the temperature‐dependent changes in the morphological structure, such as changes in the the tortuous paths and crystallinity in the composite films because of the addition of OD. In the storage test, the PP/OD (83:17) composite films continuously controlled the gas concentration of the headspace and protected against environmental factors; this reduced the enzymatic activity and led to higher quality cherry tomatoes compared to the case when the pure PP and MP33000 films were used. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44087.     

Synthesis of a novel chelating resin functionalized with β‐dicarbonyl units from a new monomer and its use for selective separation and preconcentration of some trace metals in water samples

A new chelating resin, poly(4‐ethoxy‐2,4‐dioxobutyl 2‐methylacrylate), functionalized with β‐dicarbonyl units derived from a newly synthesized monomer was prepared and characterized with molecular spectroscopic methods. The synthesized polymer was used for the separation and preconcentration of Mn(II), Co(II), Ni(II), Zn(II), and Pb(II) ions before their determination by flame atomic absorption spectrometry. The effects of different parameters, such as pH of sample solution, sample and eluent flow rates, volumes of sample and eluent, concentration and type of eluent, and matrix ions on quantitative recovery of the analytes were evaluated for optimal experimental conditions. The adsorption capacities of the chelating resin for cobalt(II) and nickel(II) were found to be 24.2 and 19.8 mg g^?1, respectively. Validation studies for the proposed method were performed using three certified reference materials, and the results obtained were agreed with those of the certified values. The proposed method was successfully applied to the analysis of water samples. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis,characterization and thermal dissociation of 2‐butoxyethanol‐blocked diisocyanates and their use in the synthesis of isocyanate‐terminated prepolymers

A series of blocked diisocyanates has been synthesized from toluene diisocyante (TDI), isophorone diisocyanate (IPDI), hexamethylene diisocyanate (HDI), 4,4′‐diphenylmethane diisocyanate (MDI) and 2‐butoxyethanol. The synthesis of blocked diisocyanate adducts was confirmed by Fourier transform infrared, ¹H NMR, electron impact mass spectrometry and nitrogen analysis. Differential scanning calorimetry (DSC), thermal gravimetric analysis (TGA) and carbon dioxide evolution were used to determine the minimum de‐blocking temperatures. De‐blocking temperatures determined by these three techniques were found to be in the order DSC > TGA > CO₂ evolution. The effect of different metal catalysts on thermal de‐blocking reaction of the blocked diisocyanates was studied, using the carbon dioxide evolution method. It was found that iron(III) oxide has the maximum catalytic activity on de‐blocking. The solubility of the blocked diisocyanate adducts was determined in different solvents. The study revealed that at 30 °C blocked IPDI and HDI adducts show better solubility than adducts based on TDI and MDI. Isocyanate‐terminated prepolymers of blocked diisocyanates and hydroxyl‐terminated polybutadiene (HTPB) were prepared. The storage stability and gelation times of the prepolymers were studied. Results showed that all the diisocyanate‐HTPB compositions are stable at 50 °C for more than three months. However, aliphatic diisocyanate‐HTPB compositions require greater gelation time than aromatic diisocyanate‐HTPB compositions at their respective de‐blocking temperatures. Copyright © 2007 Society of Chemical Industry     

Synthesis and characterization of hydroxy‐terminated polyether‐polydimethylsiloxane‐polyether (PE‐PDMS‐PE) triblock oligomers and their use in the preparation of thermoplastic polyurethanes

A series of hydroxy‐terminated polyether‐polydimethylsiloxane‐polyether (α,ω‐dihydroxy‐(PE‐PDMS‐PE)) ABA triblock oligomers were synthesized from silanic fluids and methyl polyallyloxide polyethers. The reaction was a one‐step solventless hydrosilylation reaction with chloroplatinic acid (CPA) catalyst in the presence of heat. These ABA oligomers were characterized via ¹H‐NMR, ¹³C‐NMR, ²⁹Si‐NMR, FT‐IR, and GPC to demonstrate that they exhibit a 100% linear ABA structure with a siloxane Si? O chain in the center and polyether ethylene oxide (EO)/propylene oxide (PO) chains on the two sides terminated by hydroxy groups. The triblock oligomers were used to form thermoplastic polyurethanes (TPUs) using two‐step solventless bulk polymerization. The investigation of triblock oligomers impact on TPUs mechanical properties, thermal performance, surface water repellency, and morphology performance were analyzed by Instron material tester, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), water contact angles (WCA), scanning electron microscope (SEM), and transmission electron microscope (TEM). DSC and TGA indicated that PE‐PDMS‐PE modified TPUs had a clear lower T_g under ?120°C and the temperature of 50% weight loss was improved from 280 to 340°C. PE‐PDMS‐PE–modified TPU did not have the marked reduction on mechanical properties than pure polyether produced TPU. Tensile strength was maintained at 13 MPa and elongation was maintained at 300%. SEM and TEM were used to investigate the copolymers’ morphology performance and found that all PO PE‐PDMS‐PE had a pseudo‐three phase separation. WCA analysis confirmed that PE‐PDMS‐PE–modified TPU had significantly improved hydrophobic performance because the silicone structure linked into TPU copolymers. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42521.     

Synthesis and characterization of poly[(R,S)‐3‐hydroxybutyrate] telechelics and their use in the synthesis of poly(methyl methacrylate)‐b‐ poly(3‐hydroxybutyrate) block copolymers

Poly[(R,S)‐3‐hydroxybutyrate] oligomers containing dihyroxyl (PHB‐diol), dicarboxylic acid (PHB‐diacid) and hydroxyl‐carboxylic acid (a‐PHB) end functionalities were obtained by the anionic polymerization of β‐butyrolacton (β‐BL). Ring opening anionic polymerization of β‐BL was initiated by a complex of 18‐Crown‐6 with γ‐hydroxybutyric acid sodium salts (for PHB‐diol and a‐PHB) or succinic acid disodium salt (for PHB‐diacid). Dihydroxyl functionalization was formed by the termination of polymerization with bromo‐ethanol or bromo‐decanol while the others were done by protonation. Hydroxyl and/or carboxylic acid functionalized PHB oligomers with ceric salts were used to initiate the polymerization of methylmethacrylate (MMA). PHB‐b‐PMMA block copolymers obtained by this way were purified by fractional precipitation and characterized using ¹H‐NMR and ¹³C‐NMR, gel permeation chromatography (GPC), and thermal analysis (DSC and TGA) techniques. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 965–973, 2002     

Development of new ionomer blend membranes,their characterization,and their application in the perstractive separation of alkenes from alkene–alkane mixtures. II. Electrical and facilitated transport properties

In this contribution, the synthesis and characterization of novel ion‐exchange blend membranes which contain the SO₃Ag group for the application in the perstractive separation of alkene–alkane mixtures, where the Ag⁺ ion serves as facilitated transport site for the alkene via formation of a pi complex with the alkene double bond, is presented. In this part of the article, the transport properties of the following blend membrane types are described: (1) acid–base blend membranes of ortho‐sulfone‐sulfonated polysulfone (PSU) with ortho‐sulfone‐diaminated PSU; (2) blend membranes of ortho‐sulfone‐sulfonated PSU with unmodified PSU; (3) blend membranes of ortho‐sulfone‐sulfonated PSU with ortho‐sulfone disilylated PSU. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 422–427, 1999     

Synthesis of Ruthenium Hydride Complexes Containing beta‐Aminophosphine Ligands Derived from Amino Acids and their use in the H2‐Hydrogenation of Ketones and Imines

The new complexes RuHCl(PPh₂CH₂CHRNH₂)₂ and RuHCl(PPh₂CH₂CHRNH₂)(R‐ binap), R=H (Pgly), R=Me [(R)‐Pala] were prepared by the substitution of the PPh₃ ligands in RuHCl(PPh₃)₃ or RuHCl(PPh₃)[(R)‐binap] with beta‐aminophosphines derived from amino acids. The complex trans‐RuHCl(Pgly)[(R)‐binap] has been characterized by X‐ray crystallography. The complex trans‐RuHCl[(S)‐Ppro]₂ where (S)‐Ppro is derived from proline was also prepared and characterized by X‐ray crystallography. These were used as catalyst precursors in the presence of a base (KOPr‐i or KOBu‐t) for the hydrogenation of various ketones and imines to the respective alcohols and amines with H₂ gas (1–11 atm) at room temperature. Acetophenone was hydrogenated to (S)‐1‐phenylethanol in low ee (up to 40%) when catalyzed by the enantiomerically pure complexes. These complexes are especially active in the hydrogenation of sterically congested and electronically deactivated ketones and imines and are selective for the hydrogenation of CO bonds over CC bonds.