Detection of trace levels of Pb in tap water at boron-doped diamond electrodes with anodic stripping voltammetry

Boron-doped diamond (BDD) electrodes were used to investigate the possibility of detecting trace levels of lead by linear-sweep anodic stripping voltammetry. The low limit of detection (2 nM) is an advantage compared to other electrode materials, and it was found that at low pH values, copper concentrations that are usually present in drinking water do not affect to a large extent the detection of lead. These findings recommend anodic stripping voltammetry at the BDD electrodes as a suitable mercury-free method for the determination of trace levels of lead in drinking water. The results obtained for the lead detection in tap water real samples are in excellent agreement with those found by inductively coupled plasma-mass spectrometry (ICP-MS), demonstrating the practical analytical utility of the method.     

Enhanced electrochemical response in oxidative differential pulse voltammetry of dopamine in the presence of ascorbic acid at carboxyl-terminated boron-doped diamond electrodes

The differential pulse voltammetric (DPV) peak for dopamine (DA) oxidation was found to be highly amplified by the addition of ascorbic acid (AA) when carboxyl-terminated boron-doped diamond (BDD) electrodes were used as the working electrode. The DP voltammogram for a solution containing DA and AA obtained using a 4-pentenoic acid-modified BDD (4PA-BDD) electrode showed well-separated oxidation peaks for DA and AA at 0.4 and 0.6 V vs. Ag/AgCl, respectively. In addition, as the DA concentration increased at constant AA concentration, a simultaneous increase in the DA peak current density and decrease in the AA peak current density were observed. The slope of the calibration curve for the [DA] range of 1-10 μM in the presence of AA (500 μM) was seven times larger than that obtained in the absence of AA. Such an enhancement was found to be more efficient at 4PA-BDD than at oxidized-BDD, partly due to simple electrostatic effects and partly due to suppression of the polymerization of DA oxidation products by the terminal carboxyl groups. The enhanced detection method using a carboxyl-terminated BDD electrode should be an effective analytical tool, especially for determining low concentrations of DA in the presence of high concentrations of AA.     

Electrochemical studies of ganciclovir at boron-doped nanocrystalline diamond electrodes

The electrochemical oxidation of ganciclovir was investigated at boron-doped nanocrystalline diamond (BDND) electrodes by the use of cyclic voltammetry and differential pulse voltammetry. The optimization of the experimental variables including supporting electrolyte and pH value was studied, and the 0.04-M Britton-Robinson buffer solution (pH 2.5) was selected. The relationship of the oxidation peak potential to scan rate and pH value was also investigated, and 2 electron transfer and 2 proton participation for the oxidation process of ganciclovir at BDND electrode were obtained. Compared with boron-doped microcrystalline diamond and glassy carbon electrodes, the BDND electrode demonstrated the wider linear range of 0.5-350 μM, lower limit of detection of 0.2 μM, and higher reproducibility and stability for the determination of ganciclovir under the optimum conditions. For the analysis of ganciclovir in human serum at the BDND electrodes, precision and accuracy were checked by recovery experiments.     

Preparation and reactivity of carboxylic acid-terminated boron-doped diamond electrodes

The paper reports on the formation of carboxy-terminated boron-doped diamond (BDD) electrodes. The carboxylic acid termination was prepared in a controlled way by reacting photochemically oxidized BDD with succinic anhydride. The resulting interface was readily employed for the linking of an amine-terminated ligand such as an osmium complex bearing an amine terminal group. The interfaces were characterized using X-ray photoelectron spectroscopy (XPS) and cyclic voltammetry (CV). Contact angle measurements were used to follow the changes in surface wetting properties due to surface functionalization. The chemical reactivity of the carboxyl-terminated BDD was investigated by covalent coupling of the acid groups to an amine-terminated osmium complex.     

Anodic behavior of sertindole and its voltammetric determination in pharmaceuticals and human serum using glassy carbon and boron-doped diamond electrodes

The electrochemical oxidation of sertindole was investigated using cyclic, linear sweep voltammetry at a glassy carbon and boron-doped diamond electrodes. The aim of this study was to determine sertindole levels in serum and pharmaceutical formulations, by means of electrochemical methods. In cyclic voltammetry, depending on pH values, sertindole showed one or two irreversible oxidation responses. These two responses were found related to the different electroactive part of the molecule. Using second and sharp oxidation peak, two voltammetric methods were described for the determination of sertindole by differential pulse and square wave voltammetry at the glassy carbon and boron-doped diamond electrodes. Under optimized conditions, the current showed a linear dependence with concentration in the range between 1 × 10⁻⁶ and 1 × 10⁻⁴ M in acetate buffer at pH 3.5 and between 4 × 10⁻⁶ and 1 × 10⁻⁴ M in spiked human serum samples for both methods. The repeatability, reproducibility, selectivity, precision and accuracy of all the methods in all media were investigated and calculated. These methods were successfully applied for the analysis of sertindole pharmaceutical dosage forms and human serum samples. No electroactive interferences from the tablet excipients and endogenous substances from biological material were found.     

Anodic stripping voltammetry of zinc at boron-doped diamond electrodes in ammonia buffer solution

This paper describes the deposition of zinc(II) with anodic stripping voltammetry on the boron-doped diamond electrode. We illustrate the dependency of several parameters on the magnitude of the oxidation peak and try to optimize the method. The supporting electrolyte was found to influence the oxidation peak magnitude. Compared with acetic acid, the most frequently used supporting electrolyte, ammonia buffer solution leads to a four times higher signal. We assume that the formation of zinc complexes, primarily tetraaminezinc(II), are responsible for the better response. Further factors studied and assessed include buffer pH, buffer concentration, deposition potential, deposition time and scan rate. With the improved conditions, a final detection limit of 5 ppb was accomplished.     

Covalent modification of boron-doped diamond electrodes with an imidazolium-based ionic liquid

An ionic liquid (IL, 1-(methylcarboxylic acid)-3-octylimidazolium-bis (trifluoromethylsulfonyl)imide) was covalently coupled onto a boron-doped diamond (BDD) surface through an esterification reaction. The resulting surface was characterized by X-ray photoelectron spectroscopy, water contact angle and electrochemical measurements. Selective electron transfer towards positively and negatively charged redox species was recorded. While the presence of Fe(CN)₆⁴⁻ could be detected on the IL-modified BDD interface, no surface-immobilized Ru(NH₃)₆³⁺ was recorded. The IL-modified BDD electrode showed in addition changes in surface wettability when immersed into aqueous solution containing different anions.     

阳极溶出伏安法同时测定海水中铜、铅、镉、锌

采用微分脉冲阳极溶出伏安法同时测定了海水中Cu、Pb、Cd、Zn4种痕量元素,在选定最佳实验条件下,通过标准加入法对海水的Cu、Pb、Cd、Zn进行分析,其相对标准偏差分别为5.6%、4.6%、1.80%、1.98%,而回收率分别为98.0%～105.6%、95.3%～106.5%、90.0%～107.4%和90.8%～103.5%,测定结果令人满意。     

Polymerisation occurrence in the anodic oxidation of phosphite on a boron-doped diamond electrode

The electrogeneration of polymeric phosphorus compounds during the anodic oxidation of aqueous solutions of phosphites on a boron-doped diamond electrode has been studied. Although the main oxidation product is orthophosphate, the results indicate the simultaneous generation of short-chain and cyclic compounds containing two and three phosphorus atoms whose evolution has been followed by ion chromatography.The effect on the reaction yield of several operative parameters such as current density, pH, temperature and initial phosphite concentration has been investigated.Consistently with the data presented, a new process for the generation of polymeric phosphates is obtained.     

Investigations of electrochemical oxygen transfer reaction on boron-doped diamond electrodes

In this paper, the electrochemical oxygen transfer reaction (EOTR) is studied on boron-doped diamond electrodes using simple C₁ organic compounds (methanol and formic acid). The kinetics of both oxygen evolution (side reaction) and organics oxidation (main reaction) has been investigated using boron-doped diamond microelectrodes-array (BDD MEA). Oxygen evolution, in the high-potential region, takes place with a Tafel slope of 120 mV dec⁻¹ and zero reaction order with respect to H⁺. In the presence of organics, a shift of the polarization curves to lower potentials is observed while the Tafel slopes remain close to 120 mV dec⁻¹. A simplified model of C₁ organics oxidation is proposed. Both water discharge and organics oxidation are assumed to be fast reactions. The slowest step of the studied EOTR is the anodic discharge of hydroxyl radicals to oxygen. Further in this work, electrolysis of formic acid on boron-doped diamond macroelectrode is presented. In order to achieve 100% current efficiency, electrolysis was carried out under programmed current, in which the current density was adjusted to the limiting value.     

Sensitive determination of Cd and Pb by differential pulse stripping voltammetry with in situ bismuth-modified zeolite doped carbon paste electrodes

Here we investigated the analytical performances of the bismuth-modified zeolite doped carbon paste electrode (BiF-ZDCPE) for trace Cd and Pb analysis. The characteristics of bismuth-modified electrodes were improved greatly via addition of synthetic zeolite into carbon paste. To obtain high reproducibility and sensitivity, optimum experimental conditions for bismuth deposition were studied. Voltammetric responses of the BiF-ZDCPEs prepared with different ratios of zeolite, carbon powder, and silicone, were examined under same conditions. The in situ plated (zeolite/graphite powder/silicone, 10/190/80 w/w) BiF-ZDCPEs exhibited the most sensitive response to Cd and Pb in 0.10 M acetate buffer (pH 4.5). The detection limits of the modified electrode were 0.08 μg L⁻¹ for Cd(II) and 0.10 μg L⁻¹ for Pb(II) based on three times the standard deviation of the baseline with a preconcentration time of 120 s under optimal conditions, respectively. The modified electrode showed well linear response to both Cd(II) and Pb(II) over the concentration range from 1.0 to 20.0 μg L⁻¹. The BiF-ZDCPEs were successfully applied to the determination of Cd(II) and Pb(II) in real samples, and the results were in agreement with those of atomic absorption spectroscopy (AAS).     

Electrochemical oxidation of aniline at boron-doped diamond electrodes

The electrochemical oxidation of aniline at boron-doped diamond (BDD) electrodes was investigated by cyclic voltammetry, steady-state polarization measurements and bulk electrolysis under potentiostatic control. It was found that acidic media is suitable for efficient electrochemical oxidation of aniline, because at low pH, the potential required for avoiding electrode fouling is lower than in neutral and alkaline media. The results of the longtime polarization measurements suggested that more anodic potentials ensure slightly higher efficiency for the conversion of aniline to CO₂, while the direct oxidation process does not play a prominent part in the overall electrochemical incineration of aniline. The current efficiencies (44%) and the efficiency of aniline conversion to CO₂ (80%) favourably compare with those reported for other electrochemical methods for aniline destruction. The results demonstrate the possibility of using BDD as an electrode material for electrochemical wastewater treatment, mainly when very high anodic potentials are required.     

Electrochemical destruction of chlorophenoxy herbicides by anodic oxidation and electro-Fenton using a boron-doped diamond electrode

The degradation of herbicides 4-chlorophenoxyacetic acid (4-CPA), 4-chloro-2-methylphenoxyacetic acid (MCPA), 2,4-dichlorophenoxyacetic acid (2,4-D) and 2,4,5-trichlorophenoxyacetic acid (2,4,5-T) in aqueous medium of pH 3.0 has been comparatively studied by anodic oxidation and electro-Fenton using a boron-doped diamond (BDD) anode. All solutions are totally mineralized by electro-Fenton, even at low current, being the process more efficient with 1 mM Fe²⁺ as catalyst. This is due to the production of large amounts of oxidant hydroxyl radical (OH) on the BDD surface by water oxidation and from Fenton’s reaction between added Fe²⁺ and H₂O₂ electrogenerated at the O₂-diffusion cathode. The herbicide solutions are also completely depolluted by anodic oxidation. Although a quicker degradation is found at the first stages of electro-Fenton, similar times are required for achieving overall mineralization in both methods. The decay kinetics of all herbicides always follows a pseudo first-order reaction. Reversed-phase chromatography allows detecting 4-chlorophenol, 4-chloro-o-cresol, 2,4-dichlorophenol and 2,4,5-trichlorophenol as primary aromatic intermediates of 4-CPA, MCPA, 2,4-D and 2,4,5-T, respectively. Dechlorination of these products gives Cl⁻, which is slowly oxidized on BDD. Ion-exclusion chromatography reveals the presence of persistent oxalic acid in electro-Fenton by formation of Fe³⁺-oxalato complexes, which are slowly destroyed by OH adsorbed on BDD. In anodic oxidation, oxalic acid is mineralized practically at the same rate as generated.     

Plasma etching treatment for surface modification of boron-doped diamond electrodes

Boron-doped diamond (BDD) thin film surfaces were modified by brief plasma treatment using various source gases such as Cl₂, CF₄, Ar and CH₄, and the electrochemical properties of the surfaces were subsequently investigated. From X-ray photoelectron spectroscopy analysis, Cl and F atoms were detected on the BDD surfaces after 3 min of Cl₂ and CF₄ plasma treatments, respectively. From the results of cyclic voltammetry and electrochemical AC impedance measurements, the electron-transfer rate for Fe(CN)₆^3−/4− and Fe^2+/3+ at the BDD electrodes was found to decrease after Cl₂ and CF₄ plasma treatments. However, the electron-transfer rate for Ru(NH₃)₆^2+/3+ showed almost no change after these treatments. This may have been related to the specific interactions of surface halogen (C-Cl and C-F) moieties with the redox species because no electrical passivation was observed after the treatments. In addition, Raman spectroscopy showed that CH₄ plasma treatment of diamond surfaces formed an insulating diamond-like carbon thin layer on the surfaces. Thus, by an appropriate choice of plasma source, short-duration plasma treatments can be an effective way to functionalize diamond surfaces in various ways while maintaining a wide potential window and a low background current.     

AC impedance studies of anodically treated polycrystalline and homoepitaxial boron-doped diamond electrodes

The electrochemical properties of several types of diamond electrodes, including polycrystalline and homoepitaxial films, that underwent anodic treatment were examined with the electrochemical impedance spectroscopic (EIS) technique, as well as with capacitance-potential measurements. From an analysis of the impedance behavior, it was found that an additional capacitance element, which is apparent in the relatively high-frequency range (100-1000 Hz), was generated on the polycrystalline and (1 0 0) homoepitaxial diamond electrodes after anodic treatment. This capacitive element can be characterized as being non-Faradaic, because it has negligible dependence on the applied potential. Acceptor densities and depth profiles were calculated from the Mott-Schottky plots, and the acceptor densities in the near-surface region of the anodically treated surfaces were found to be extremely low. These results indicate that passive layers were generated on the diamond surfaces by the anodic treatment. The capacitance-potential behavior was also consistent with a model consisting of a semiconductor with a passive surface film. The passive film is proposed to arise as a result of the removal of hydrogen acting as an acceptor in the subsurface region, leaving hydrogen that is paired essentially quantitatively with the boron dopant, effectively neutralizing it.     

The bromine electrode Part III: reaction kinetics at highly boron-doped diamond electrodes

Bromide oxidation and bromine reduction were investigated at boron-doped diamond (BDD) electrodes, in acidic media. Both the anodic and the cathodic reactions of the bromine redox couple were found to take place through a mechanism in which the Volmer step is rate-determining, as a result of a very poor stabilization of intermediate radical species. Accordingly, exchange current densities at BDD and polycrystalline Pt differ by more than five orders of magnitude. Finally, from the analysis of CV data, estimations of the anodic and cathodic transfer coefficients, as well as of heterogeneous rate constants, were obtained.     

Degradation of phenols using boron-doped diamond electrodes: A method for quantifying the extent of combustion

Boron-doped diamond (BDD) is a very promising material to be used in electrochemical processes of wastewater treatment, since it enables the efficient degradation of many persistent/recalcitrant organic pollutants, with the possibility of achieving their complete mineralization (i.e., combustion to CO₂). It was investigated in this work the electrochemical degradation of a set of phenols frequently found in industrial wastewaters, specifically, phenol, m-cresol, catechol and guaiacol, using a BDD anode. It was the aim of this study to present a method for quantifying the extent of combustion in this type of process, by introducing the concept of “combustion efficiency”, η_C, which is derived from well established theory. Experimental values of combustion efficiencies, in tests performed at different current densities were obtained for each product. The results show that the highest values of η_C are found for catechol, and that η_C increases with increasing current densities. The effect of the solute concentration on η_C was also investigated; the results show that under conditions of diffusive control η_C is independent of the concentration, pointing out that combustion and current efficiencies are independent quantities.     

Electrochemical incineration of chloromethylphenoxy herbicides in acid medium by anodic oxidation with boron-doped diamond electrode

The electrochemical degradation of saturated solutions of herbicides 4-chloro-2-methylphenoxyacetic acid, 2-(4-chlorophenoxy)-2-methylpropionic acid and 2-(4-chloro-2-methylphenoxy)propionic acid in 1 M HClO₄ on a boron-doped diamond (BDD) thin film anode has been studied by chronoamperometry, cyclic voltammetry and bulk electrolysis. At low anodic potentials polymeric products are formed causing the fouling and deactivation of BDD. This is reactivated at high potentials when water decomposes producing hydroxyl radical as strong oxidant of organics. Electrolyses in a batch recirculation system at constant current density ≥8 mA cm⁻² yielded overall decontamination of all saturated solution. The effect of current density and herbicide concentration on the degradation rate of each compound, the specific charge required for its total mineralization and instantaneous current efficiency have been investigated. Experimental results have been compared with those predicted by a theoretical model based on a fast anodic oxidation of initial herbicides, showing that at 30 mA cm⁻² their degradation processes are completely controlled by mass transfer. Kinetic analysis of the change of herbicide concentration with time during electrolysis, determined by high-performance liquid chromatography, revealed that all compounds follow a pseudo first-order reaction. Aromatic intermediates and generated carboxylic acids have been identified using this technique and a general pathway for the electrochemical incineration of all herbicides on BDD is proposed.     

On the performances of lead dioxide and boron-doped diamond electrodes in the anodic oxidation of simulated wastewater containing the Reactive Orange 16 dye

The performances of the Ti-Pt/β-PbO₂ and boron-doped diamond (BDD) electrodes in the electrooxidation of simulated wastewaters containing 85 mg L⁻¹ of the Reactive Orange 16 dye were investigated using a filter-press reactor. The electrolyses were carried out at the flow rate of 7 L min⁻¹, at different current densities (10-70 mA cm⁻²), and in the absence or presence of chloride ions (10-70 mM NaCl). In the absence of NaCl, total decolourisation of the simulated dye wastewater was attained independently of the electrode used. However, the performance of the BDD electrode was better than that of the Ti-Pt/β-PbO₂ electrode; the total decolourisations were achieved by applying only 1.0 A h L⁻¹ and 2.0 A h L⁻¹, respectively. In the presence of NaCl, with the electrogeneration of active chlorine, the times needed for total colour removal were markedly decreased; the addition of 50 mM Cl⁻ or 35 mM Cl⁻ (for Ti-Pt/β-PbO₂ or BDD, respectively) to the supporting electrolyte led to a 90% decrease of these times (at 50 mA cm⁻²). On the other hand, total mineralization of the dye in the presence of NaCl was attained only when using the BDD electrode (for 1.0 A h L⁻¹); for the Ti-Pt/β-PbO₂ electrode, a maximum mineralization of 85% was attained (for 2.0 A h L⁻¹). For total decolourisation of the simulated dye wastewater, the energy consumption per unit mass of dye oxidized was only 4.4 kWh kg⁻¹ or 1.9 kWh kg⁻¹ using the Ti-Pt/β-PbO₂ or BDD electrode, respectively. Clearly the BDD electrode proved to be the best anode for the electrooxidative degradation of the dye, either in the presence or absence of chloride ions.     

Electrochemical costripping models and mutual interferences of mutli-transition metal systems on the surface of boron-doped diamond

Electrochemical behaviors of electrodeposition stripping of some transition metals, such as Ag, Cu, Pb, Sn, and Cd were investigated on boron-doped diamond (BDD) film with differential pulse anodic stripping voltammetry (DPASV). The results show that the metal costripping process on the surface of BDD is influenced by deposition potential of transition metals, potential of hydrogen evolution reaction, mutual interferences between two transition metals, and so on. Electrochemical costripping models and mutual interferences of binary transition metals are proposed. (i) When the hydrogen evolution potential is higher or lower than the deposition potential of two transition metals, the metals do not form alloys and compound the cathode ions in the solution, and the costripping process conforms to metal 1 stripping-metal 2 stripping. (ii) When the hydrogen evolution potential is between the deposition potential of two transition metals, the metals do not form alloys and compound the cathode ions in the solution, and the costripping process conforms to metal 1 stripping-hydrogen evolution-metal 2 stripping. (iii) When two transition metals form alloys, the costripping process conforms to metal 1 stripping-alloy striping-metal 2 stripping. (iv) When the hydrogen evolution potential is between deposition potential of two transition metals, and transition metal 2 is complexed with one kind of cathode ion in the solution, the costripping process conforms to metal 1 stripping-hydrogen evolution-metal 2 complex formation-metal 2 stripping. Moreover, the electrochemical-costripping model of two transition metals in a solution with three or more transition metals, is similar to that in the binary system. It is also found that various metals electrodeposited on BDD film in the form of single metal or alloy can be completely stripped away by the constant-potential electrolysis technique at 2.8 V for 10 s.