Thermal treatment effect on nanostructured TiO2 films deposited using diethanolamine stabilized precursor sol

A clear ethanol based precursor sol obtained using diethanolamine has been utilized for the deposition of TiO₂ films annealed at different temperatures. The influence of annealing temperature on the structural, optical and electrochemical properties of TiO₂ thin films has been examined. Diethanolamine stabilizes the precursor sol due to its chelate forming ability with the alkoxides. It reacts as a tridentate ligand with the titanium isopropoxide. The threshold for the onset of crystallization in the films is identified at a temperature of 300 °C. The SEM study on the films elucidates segregation of irregularly shaped features into finer round clusters as a function of annealing temperature. As determined from the AFM study, the roughness parameter in the films has shown an increase with the annealing temperature. Photoluminescence measurements have given an indirect evidence for the presence of stoichiometric titanium oxide in the films. An optimum crystallite size and high ion storage capacity in the 300 °C annealed film has led to its superior electrochromic activity with the transmission modulation and coloration efficiency of the same film being 42% and 8.1 cm² C⁻¹, respectively at 550 nm. The highest degree of porosity in the 300 °C annealed film as established from the SEM study is also the reason behind its best electrochromic performance. In addition, the 300 °C annealed film also exhibits the fastest coloration switching kinetics.     

TiO2, TiO2/Ag and TiO2/Au photocatalysts prepared by spray pyrolysis

TiO₂, TiO₂/Ag and TiO₂/Au photocatalysts exhibiting a hollow spherical morphology were prepared by spray pyrolysis of aqueous solutions of titanium citrate complex and titanium oxalate precursors in one-step. Effects of precursor concentration and spray pyrolysis temperature were investigated. By subsequent heat treatment, photocatalysts with phase compositions from 10 to 100% rutile and crystallite sizes from 12 to 120 nm were obtained. A correlation between precursor concentration and size of the hollow spherical agglomerates obtained during spray pyrolysis was established. The anatase to rutile transformation was enhanced with metal incorporations and increased precursor concentration. The photocatalytic activity was evaluated by oxidation of methylene blue under UV-irradiation. As-prepared TiO₂ particles with large amounts of amorphous phase and organic residuals showed similar photocatalytic activity as the commercial Degussa P25. The metal incorporated samples showed comparable photocatalytic activity to the pure TiO₂ photocatalysts.     

The synthesis and morphology characteristic study of BAO-ODPA polyimide/TiO2 nano hybrid films

Hybrid nanocomposite films of titanium dioxide (TiO₂) in polyimide (PI) from 2,5-bis(4-aminophenyl)-1,3,4-oxadiazole (BAO) and 4,4′-oxydiphthalic anhydride (ODPA) have been successfully fabricated by an in situ sol-gel process. These nanocomposite films exhibit fair good optical transparency up to 40 wt% of TiO₂ content. X-ray diffraction spectroscopy shows three sharp peaks in pure BAO-ODPA PI. It results from the intermolecular regularity. However, the intermolecular regularity in the hybrid film is disrupted by the introduction of TiO₂ nanoparticles with no sharp peak in XRD spectra. Fourier transform infrared (FTIR) and X-ray photoelectron spectroscopy (XPS) results confirm the formation of TiO₂ particles in PI matrix. The surface Ti content is much lower than the theoretical bulk content in all hybrid films. The ratio of the former to the latter increases with the TiO₂ content and levels off at TiO₂ wt%≥20. Transmission electron microscope (TEM) images show that the TiO₂ phase is well dispersed in the polymer matrix. The size of the TiO₂ phase increases from 10 to 40 nm when the TiO₂ content is 5-30 wt%, respectively.     

Study of the sulfation kinetics between SO2 and CaO catalyzed by TiO2 nano-particles

The catalytic activity of TiO₂ nano-particles, prepared by a sol-gel method, was studied when added in the reaction between SO₂ and CaO. The reaction products were analyzed by infrared spectrophotometry (IR) and specific surface area analysis and the kinetics and mechanisms of the sulfation catalyzed by the addition of TiO₂ are discussed. The results indicate that nano-TiO₂, which serves as an active catalytic center, enhances O₂ transfer and is helpful in the diffusion of SO₂ from the product layer to the inner unreacted CaO. As a result, the desulfurization efficiency increased. The results also suggest that the SO₂ and NO must both be removed simultaneously in order to keep the sulfation rate. The desulfurization reactions are first order for SO₂ concentration and zero order for O₂ concentration and include two zones, the surface reaction zone and the product layer diffusion zone, with later being the rate limiting step. The apparent activation energy of the desulfurization reaction decreased with the addition nano-TiO₂ as compared to that without. The unreacted shrinking reaction core model was used to investigate the reaction kinetics and was shown to describe the course of desulfurization. Lastly, the results obtained through calculation agree with the empirical data.     

Onset coarsening-coalescence kinetics of ZrO2 and less refractory TiO2 nanoparticles: Effect of homologous temperature and phase transformation

Specific surface area change of ZrO₂ (predominant tetragonal - (t) symmetry, 30-50 nm) and less refractory TiO₂ anatase nanoparticles (20-50 nm) upon isothermal firing at 700-1000 °C in air was determined by N₂ adsorption-desorption hysteresis isotherm. The nanoparticles underwent onset coarsening-coalescence within minutes without appreciable phase transformation for TiO₂, but with extensive transformation into monoclinic (m-) symmetry for ZrO₂. The apparent activation energy of such a process being not much higher for ZrO₂ (77 ± 23 kJ/mol) than TiO₂ (56 ± 3 kJ/mol) nanoparticles can be attributed to transformation plasticity. The minimum temperature for coarsening/coalescence of the present ZrO₂ and TiO₂ nanoparticles was estimated as 710 and 641 °C, respectively.     

Dispersion of TiO2 nanopowders to obtain homogeneous nanostructured granules by spray-drying

This work deals with the dispersion and stabilisation of nanosized TiO₂ particles in an aqueous medium as a first step in the preparation of spray-dried nanostructured powders.A colloidal route leading to the production of titania nanostructured feedstocks to obtain nanostructured powders was developed. The process was based on the production of homogeneous and concentrated TiO₂ nanosuspensions dispersed in deionised water with a suitable control of pH and the use of an appropriate anionic dispersant. Concentrated suspensions could be obtained by mixing with an ultrasounds probe at different times depending on the dispersing conditions.Homogeneous suspensions prepared were then reconstituted by spray drying into free-flowing powders with an adequate granule size distribution for diverse purposes, such as atmospheric plasma spraying coatings.     

A novel two-step method to synthesize lotus-leaf-structured TiO2 nanocrystals with good photocatalytic activity

Lotus-leaf-structured TiO₂ nanocrystals were prepared by a novel simple two-step method. TiO₂ nanocrystals obtained by two-step method exhibited better photocatalytic activity than the as-prepared TiO₂ nanocrystal obtained by one-step liquid phase deposition method. Even compared with commercial TiO₂ photocatalyst with the smaller average size (~ 7 nm), lotus-leaf-structured TiO₂ nanocrystals exhibited better photocatalytic activity. The possible reason for the good photocatalytic activity was also investigated.     

Influence of TiO2 and CeO2 on the hydrogenation activity of bulk Ni2P

TiO₂- and CeO₂-promoted bulk Ni₂P catalysts were prepared by impregnation and in-situ H₂ temperature-programmed reduction method. The prepared catalysts were characterized by XRD and XPS. The hydrogenation activities of the catalysts were studied using 1.5 wt.% 1-heptene in toluene and 1.0 wt.% phenylacetylene in ethanol as the model feeds. The results indicate that bulk Ni₂P possesses low hydrogenation activity but is tunable by simply controlling the content of the additives (TiO₂ or CeO₂), suggesting that TiO₂ and CeO₂ are effective promoters to enhance the hydrogenation activity of Ni₂P.     

Sonosynthesis of nanostructured TiO2 doped with transition metals having variable bandgap

Here is described a sonosynthesis method to produce nanostructured TiO₂ pure and doped (Al, C, Co, Fe and Rh). The synthesized TiO₂ is amorphous and is transformed to anatase, brookite or rutile by heat treatments at temperatures between 100 and 300 °C. Pure TiO₂ can be partially transformed to brookite between 100 and 300 °C. The band gap in all heat treated samples from 100–600 °C is relatively constant, 3.2 eV, except for those doped with Fe. This effect on the band gap is the results of a bi/tri-crystal (anatase:brookite:rutile) framework. Rhodium is the most effective dopant to narrow the band gap, the opposite effect is observed with C. In single phase frameworks the bandgap can be modified ranges from 2.38 to 4.10 eV depending on the dopant. TiO₂ lattices are rigid enough to promote an outwards diffusion of the dopants to the surface of the particles forming nanostructured precipitates. The precipitates develop a network of quantum-dots with sizes between 5 and 10 nm.     

Preparation and characterization of CeO2/TiO2 nanoparticles by flame spray pyrolysis

Nanocrystalline TiO₂, CeO₂ and CeO₂-doped TiO₂ have been successfully prepared by one-step flame spray pyrolysis (FSP). Resulting powders were characterized with X-ray diffraction (XRD), N₂-physisorption, Transmission Electron Microscopy (TEM) and UV-Vis spectrophotometry. The TiO₂ and CeO₂-doped TiO₂ nanopowders were composed of single-crystalline spherical particles with as-prepared primary particle size of 10-13 nm for Ce doping concentrations of 5-50 at%, while square-shape particles with average size around 9 nm were only observed from flame-made CeO₂. The adsorption edge of resulting powder was shifted from 388 to 467 nm as the Ce content increased from 0 to 30 at% and there was an optimal Ce content in association with the maximum absorbance. This effect is due to the insertion of Ce^3+/4+ in the TiO₂ matrix, which generated an n-type impurity band.     

Physical and electrochemical characterization of nanostructured composites formed by TiO2 templates and PEDOT-PPS films

We report the physical and electrochemical characterization of nanostructured composites formed by TiO₂ templates and PEDOT-PPS films. TiO₂ templates were prepared by sol-gel techniques using TiCl₄ and TiF₄ as the titania precursors, and also by adding a soluble polymer at the initial stages of the TiCl₄ sol-gel synthesis to induce porous oxide networks. The effect of different precursors and annealing environments in the crystallite and particle size of the templates was followed by XRD and SEM studies, and correlated to the electrochemical properties of TiO₂ templates dip-coated in a conducting polymer solution (PEDOT-PSS 1.3%). We found that the microstructure had a strong influence in the adsorption of the conductive polymer, which shows superior electrochemical activity in matrices with abundant surface hydroxylation, broad particle size distribution and residual carbon. Cyclic voltammetry and electrochemical impedance data revealed the differences between the several TiO₂/PEDOT-PSS systems, with the best performance observed in systems based on TiO₂ templates obtained from the TiCl₄ sol-gel route and containing residual mesoporous carbon.     

Synthesis and electrochemiluminescence of the CeO2/TiO2 composite

CeO₂/TiO₂ composite with kernel–shell structure was synthesized by a sol–gel process. The characterization results show that the composite is made up of anatase phase TiO₂ and cubic system CeO₂. The electrochemiluminescence (ECL) behavior of the CeO₂/TiO₂ composite was studied by a cyclic voltammetry in the presence of persulfate, and the effect factors on ECL emission were discussed. Based on a series of experiments, it is proposed that the strong dual ECL emission produced by the CeO₂/TiO₂ composite resulted from the benefit ECL effect of interface heterojunction in composite.     

Synthesis of TiO2/PAA nanocomposite by RAFT polymerization

Due to the strong tendency of nanoparticles such as metal oxides to agglomerate, homogeneous dispersion of these materials in a polymeric matrix is extremely challenging. In order to overcome this problem and to enhance the filler-polymer interaction, this study focused on living polymerization that was initialized from the surface of titania nanofillers. A new method for synthesizing TiO₂/polymer nanocomposites was found with a good dispersion of the nanofillers by using the bifunctional RAFT agent, 2-{[(butylsulfanyl)carbonothioyl]sulfanyl}propanoic acid). This RAFT agent has an available carboxyl group to anchor onto TiO₂ nanoparticles, and an SC(SC₄H₉) moiety for subsequent RAFT polymerization of acrylic acid (AA) to form n-TiO₂/PAA nanocomposites. The functionalization of n-TiO₂ was determined by FTIR and partitioning studies, the livingness of the polymerization was verified using GPC and NMR, while the dispersion of the inorganic filler in the polymer was studied using electron microscopy, FTIR and thermal analysis.     

基于WO3-MoO3和TiO2/CdS复合电极的光电致变色器件

电致变色广泛应用于智能窗领域,但电致变色材料仍需外部电源驱动,将太阳能电池与电致变色材料结合起来的光电致变色器件可实现无需外部供电的智能变色调控。性能优异的变色阴极和光阳极是当下光电致变色器件的研究热点。通过水热法制备WO₃-MoO₃薄膜,研究其电致变色性能;通过水热法结合连续离子层沉积法制备TiO₂/CdS复合薄膜,研究其光电转换性能。最后将WO₃-MoO₃薄膜和TiO₂/CdS复合薄膜分别作为光电致变色器件的变色阴极、光阳极构建WO₃/MoO₃-TiO₂/CdS光电致变色器件。WO₃/MoO₃-TiO₂/CdS光电致变色器件具有较大的光学调制范围(630nm处为41.99%)、更高的着色效率(35.787%),将其作为智能窗应用在现代建筑、通行工具等领域具有重要应用价值。     

Effect of TiO2 particle size on the photocatalytic reduction of CO2

Pure TiO₂ anatase particles with a crystallite diameters ranging from 4.5 to 29 nm were prepared by precipitation and sol–gel method, characterized by X-ray diffraction (XRD), BET surface area measurement, UV–vis and scanning electron microscopy (SEM) and tested in CO₂ photocatalytic reduction. Methane and methanol were the main reduction products. The optimum particle size corresponding to the highest yields of both products was 14 nm. The observed optimum particle size is a result of competing effects of specific surface area, charge–carrier dynamics and light absorption efficiency.     

Effect of TiO2 on phase evolution and microstructure of MgAl2O4 spinel in different atmospheres

The effect of TiO₂ on the formation and microstructure of magnesium aluminate spinel (MgAl₂O₄) at 1600 °C in air and reducing conditions were investigated. Under reducing conditions, stoichiometric MgAl₂O₄ spinel shifted toward alumina-rich types owing to volatilization of MgO, resulting in an increase in the porosity of fired samples. Addition of graphite to mixtures of MgO and Al₂O₃ intensified the reducing conditions and accelerated the formation of non-stoichiometric MgAl₂O₄. For TiO₂-containing samples on addition of MgAl₂O₄, magnesium aluminum titanium oxide (Mg_xAl_2(1−x)Ti_(1+x)O₅, x = 0.2 or 0.3) was detected as a minor phase. Under reducing conditions, XRD peak shifts were smaller for TiO₂-containing samples than for samples without TiO₂ owing to the formation of a solid solution of TiO₂ in MgAl₂O₄ and establishment of alumina-rich spinel, which have opposite effects on increasing the lattice parameter. In bauxite-containing samples, MgAl₂O₄ spinel, corundum, magnesium orthotitanate spinel (Mg₂TiO₄) and amorphous phases were identified. Mg₂TiO₄ spinel formed a complete solid solution with MgAl₂O₄ spinel but Mg₂TiO₄ remained as a distinct phase owing to the heterogeneous microstructure of bauxite-containing samples. Also dense microstructure established in air fired TiO₂ containing samples. The results are discussed with emphasis on the application and design of alumina-magnesia-carbon refractory materials, which are used in the steel industry.     

Structural colors from TiO2/SiO2 multilayer flakes prepared by sol-gel process

Preparation of TiO₂/SiO₂ multilayer flakes and their application to decorative powders were investigated. In contrast to conventional products prepared through the multicoating of core platelets, the coreless TiO₂/SiO₂ multilayer flakes were prepared by detaching multilayer films from their substrates. These flakes exhibited structural colors, when the optical path length of both the TiO₂ and SiO₂ layers are adjusted to be one fourth of the wavelength of visible light. A multicoating of more than five layers resulted in the propagation of cracks, which prevented the preparation of thick flakes. Paint films fabricated using the multilayer flakes and acrylic resins showed reflectance spectra that were comparable with those obtained for multicoatings on substrates.