Synthesis and electrocatalytic property of mono-dispersed Ag/Fe3O4 composite micro-sphere

One-step reaction was designed to synthesize mono-dispersed Ag/Fe₃O₄ micro-sphere with different Ag content via a facile and easily controlled hydrothermal method without use of any surfactant. The phases and composition analysis of the as-prepared samples were characterized by X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS), respectively. The morphology of the samples was observed by transmission electron microscopy (TEM) and field-emission scanning electron microscopy (FE-SEM). The results revealed that the Ag/Fe₃O₄ composite samples with different Ag content were micro-spheres with almost the identical size of 175 nm or so in diameter. The electrocatalytic activity of the resultant samples modified on a glassy carbon electrode (GCE) for p-nitrophenol reduction in a basic solution was investigated. The results indicated that all the samples exhibited enhanced electrocatalytic activity for p-nitrophenol reduction, and the sample with 3% Ag exhibited the highest electrocatalytic one.     

Preparation of Fe3O4/PVA nanofibers via combining in-situ composite with electrospinning

A novel approach, combining in-situ composite method with electrospinning, was used to prepare high magnetic Fe₃O₄/poly(vinyl alcohol) (PVA) composite nanofibers. Fe₃O₄ magnetic fluids were synthesized by chemical co-precipitation method in the presence of 6 wt.% PVA aqueous solution. PVA was used as stabilizer and polymeric matrix. The resulting Fe₃O₄/PVA composite nanofibers were characterized with field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM) and X-ray diffractometer (XRD), respectively. These composite fibers showed a uniform and continuous morphology, with the Fe₃O₄ nanoparticles embedded in the fibers. Magnetization test confirmed that the composite fiber showed a high saturated magnetization (M_s = 2.42 emµ·g^-1) although only 4 wt.% content.     

Au/Fe3O4磁性纳米粒子的合成及表征

报道了一种合成具有巯基官能团修饰的Au/Fe_3O_4磁性纳米粒子的新方法。采用共沉淀法制备Fe_3O_4磁性纳米颗粒,并在此基础上用聚(烯丙胺)溶液还原HAuCl4,制得Au/Fe_3O_4磁性核壳纳米颗粒,再用3-巯基-1-丙磺酸钠修饰Au/Fe_3O_4磁性纳米粒子,最后得到具有巯基官能团稳定的Au/Fe_3O_4磁性纳米粒子。通过扫描电子显微镜(SEM)、透射电子显微镜(TEM)、X射线能谱仪(EDS)、X射线衍射仪(XRD)、X射线光电子能谱(XPS)、振动样品磁强计(VSM)分别对产物的微观结构及磁性特征进行表征。     

An easy fabrication of monodisperse oleic acid-coated Fe3O4 nanoparticles

An easy route is described for the synthesis of monodisperse oleic acid-coated Fe₃O₄ nanoparticles with uniform size and shape via a thermal decomposition of Fe(acac)₃ in the presence of oleic acid (OA). The prepared Fe₃O₄ samples are characterized by X-ray diffraction, transmission electron microscopy, Fourier transform infrared spectrometry, and vibrating sample magnetometer. The results show that the resulting OA-coated Fe₃O₄ nanoparticles have an average diameter of about 24 nm and an OA layer, around 3 nm in thickness. The magnetic saturation value of the prepared OA-coated Fe₃O₄ nanoparticles is determined to be 78.68 emu/g, indicating a well-established superparamagnetic property.     

Hydrothermal synthesis of Fe3O4 nanoparticles and its application in lithium ion battery

Well dispersed Fe₃O₄ nanoparticles with a mean diameter of about 160 nm were synthesized by a simple hydrothermal method in the presence of sodium sulfate. The products were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), Raman spectrum, and Fourier transform infrared spectra (FTIR). Electrochemical properties of the nanostructured Fe₃O₄ as cathode electrodes of lithium ion battery were studied by conventional charge/discharge tests, showing a high initial discharge capacity of 1267 mA h g^− 1 at a current density of 0.1 mA cm^− 2.     

Co3O4负载rGO/g-C3N4臭氧光催化降解2,4-二氯苯氧乙酸活性研究

通过简单的水热法制备了Co₃O₄/rGO/g-C₃N₄催化剂,并在可见光照射下用于光催化臭氧氧化降解2,4-二氯苯氧乙酸(2,4-D)。利用XRD, SEM, TEM, XPS, UV-vis DRS, FT-IR和瞬态光电流对样品进行测试表征。研究表明,Co₃O₄, rGO和g-C₃N₄形成异质结后光生电子-空穴(e^--h⁺)对的分离效率,e^-的迁移能力以及光催化臭氧氧化活性都明显提升。此外,0.5Co₃O₄/0.25rGO/GCN对2,4-D具有100%的去除率,并具有最高反应速率(k=0.070 9 min^-1)。经过计算得出光催化臭氧氧化2,4-D的协同因子为3.91,表明光催化和臭氧氧化间具有较好的协同效应。活性组分的捕获实验结果表明h⁺和·OH是光催...     

Microwave assisted fast fabrication of Fe3O4-MWCNTs nanocomposites and their application as MRI contrast agents

Uniform Fe₃O₄ nanoparticles with diameters of 3-5 nm are successfully decorated onto the external walls of multiwall carbon nanotubes (MWCNTs) by in situ high-temperature decomposition of Fe(acac)₃ in polyol solution under the irradiation of microwave. With this method, reaction time of forming Fe₃O₄-MWCNTs nanocomposites has been significantly shortened to 15 min. The resulting Fe₃O₄-MWCNTs nanocomposites show superparamagnetic property at room temperature and can be remained as stable aqueous dispersion for 2 months. Longitudinal relaxivity (r₁) and transverse relaxivity (r₂) of the magnetic MWCNTs are 8.34 Fe mM⁻¹ S⁻¹ and 146 Fe mM⁻¹ S⁻¹ respectively. The much higher r₂ value and the obvious change in the gray scale of MR images confer the Fe₃O₄-MWCNTs nanocomposites as potential candidates for T₂-weighted MRI contrast agents.     

Ferrimagnetic and semiconducting CaCu3Fe2Sb2O12 by first principles

CaCu₃Fe₂Sb₂O₁₂ is mechanically stable, thermodynamically stable at pressures above 18 GPa. Both GGA and GGA + U methods predict that it is a ferrimagnetic semiconductor with Fe³⁺ in high spin state (S = 5/2). The coupling of Fe–Cu is antiferromagnetic, while that of Cu–Cu is ferromagnetic. The calculated total spin moment is 6.17 μ_B.     

Structure, magnetic and electrical transport properties of (Fe3O4)100 − xPtx composite films

Structure, magnetic and electrical transport properties of the polycrystalline (Fe₃O₄)_100 − xPt_x composite films fabricated using DC reactive magnetron sputtering at ambient temperature were investigated systematically. It is found that the films are composed of inverse-spinel-structured polycrystalline Fe₃O₄ and Pt. Pt addition proves the growth of Fe₃O₄ grains with the (111) orientation. All the films are ferromagnetic at room temperature. The dominant magnetic reversal mechanism turns from domain wall motion to Stoner-Wohlfarth rotation with the increasing x. The electrical transport mechanism also changes with the increasing x because Pt addition decreases the height of the tunneling barrier at the Fe₃O₄ grain boundaries, and makes the magnetoresistance of the films decrease.     

Fabrication and characterization of uniform Fe3O4 octahedral micro-crystals

Uniform Fe₃O₄ octahedral microcrystals with perfect appearance have been successfully synthesized by a Triton X100-assisted polyol process. During the polyols process for the preparation of Fe₃O₄ octahedra, the introduction of Triton X100 decreases significantly the needed concentration of NaOH. The results show that Fe₃O₄ octahedra are composed of eight triangular sheets, which are equilateral triangles. The edge size of Fe₃O₄ octahedron is about 4 μm. The magnetic properties of Fe₃O₄ octahedral particles were evaluated on a SQUID magnetometer at room temperature. The value of saturation magnetization for Fe₃O₄ octahedra is 90 emu/g, which is close to the value of bulk magnetite. The remnant magnetization and coercive force of Fe₃O₄ octahedra are considerably low, which are rare for the Fe₃O₄ particles with the size scale of micrometers. The Fe₃O₄ octahedral microcrystals show high saturation magnetizations and very low coercivities.     

Synthesis of porous NiFe2O4 microparticles and its catalytic properties for methane combustion

In this paper, we report the obtention of agglomerate porous NiFe₂O₄ microparticles type-spinel with uniform size of 1-2 μm by the oxalic acid co-precipitation method. The structure, morphology and surface of microparticles as-synthesized were characterized by X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy (XPS), respectively. Fixed bed reactor test confirmed that the NiFe₂O₄ microparticles exhibit a good catalytic activity for methane combustion with the methane light-off temperature below 350 °C. XPS spectrum revealed that the excellent catalytic activity may be attributed to the surface oxygen vacancies arising from the peculiar inverse spinel structure with octahedral (Oh) site occupied by Fe²⁺ and Ni²⁺ cations.     

A true nanocomposite: Single crystalline Au nanoparticles on single crystalline Fe3O4 nanoparticles

An Au/Fe₃O₄ nanocomposite catalyst was fabricated through a simple deposition-precipitation method. The Au/Fe₃O₄ nanocomposite is a true nanocomposite that has single crystalline Au nanoparticles supported on single crystalline Fe₃O₄ nanoparticles. Lattice fringes from both Au and Fe₃O₄ single nanoparticles were simultaneously observed by transmission electron microscope (TEM). This nanocomposite catalyst showed much high activity in low temperature CO oxidation reaction. The Au/Fe₃O₄ nanocomposite catalyst reaches 100% CO conversion at 40 °C. In comparison, Au/commercial Fe₃O₄ catalyst needs 375 °C to convert CO. This Au/Fe₃O₄ nanocomposite is an ideal sample to study synergetic effect between the catalyst and the support at nanoscale.     

Polyaniline/Fe3O4 nanocomposites synthesized under the direction of cationic surfactant

Polyaniline(PANi)/Fe₃O₄ nanocomposites have been prepared via in situ chemical oxidative polymerization directed with cationic surfactant cetyltrimethylammonium bromide (CTAB). The studies show that PANi can coat Fe₃O₄ nanoparticles. CTAB can produce insoluble substance with initiator of polyreaction, and plays a very important role for the coating of Fe₃O₄ nanoparticles by PANi. Many Fe₃O₄ nanoparticles are bald without being coated by PANi when CTAB is replaced by anionic surfactant, so anionic surfactant can not play the role of CTAB.     

One-step pyrolysis route to C/Fe3O4 hybrids from EDTA ferric sodium salt

C/Fe₃O₄ hybrid materials have potential applications in sensors and anode materials for lithium-ion batteries. In this text, a one-step pyrolysis method was used to prepare C/Fe₃O₄ hybrid materials from EDTA ferric sodium salt. The magnetic Fe₃O₄ nanoparticles can be homogeneously incorporated into carbon materials to form C/Fe₃O₄ hybrids during the reaction. The morphology and magnetism of the C/Fe₃O₄ hybrids are strongly affected by pyrolysis temperature. This method supplies an ideal template to facilely synthesize C/metal-oxide hybrid materials from EDTA metallic salts.     

Preparation and characterisation of PPy/NanoGs/Fe3O4 conductive and magnetic nanocomposites

Nanocomposites composed of polypyrrole (PPy), graphite nanosheets (NanoGs), magnetite (Fe₃O₄) nanoparticles, have been successfully synthesised with a two-step process. First, we prepared NanoGs/Fe₃O₄ powder via wet chemical co-precipitation method. Next, pyrrole was polymerised in the suspension of NanoGs/Fe₃O₄ and then PPy/NanoGs/Fe₃O₄ nanocomposites were produced. The products were characterised by Fourier-transform infrared spectroscopy, Transmission electron microscopy, Thermogravimetric, conductivity and magnetisation analysis. The result showed that the conductivity of the PPy/NanoGs/Fe₃O₄ composites, compared with pure PPy, increased dramatically. And the saturation magnetisation of nanocomposites increased with the increase of the volume fraction of the Fe₃O₄ particles. In addition, according to the thermal gravimetric analysis, compared with PPy, nanocomposites exhibited enhanced thermal stability due to the introduction of NanoGs/Fe₃O_4. The PPy/NanoGs/Fe₃O₄ composites show potential applications in electric–magnetic shield materials.     

Effect of chromium substitution on structure and magnetic properties of Bi2Fe4O9

Orthorhombic Bi₂Fe_4 − xCr_xO₉ (x = 0.0, 0.25, and 0.75) nanoplatelets were synthesized by a simple hydrothermal method. The structure, morphology, and magnetic properties of the obtained powders have been characterized. Calculation of the lattice parameters of Bi₂Fe_4 − xCr_xO₉, as well as bond lengths and angles, was carried out by X-ray diffraction Rietveld refinement. The volumes of the metal-oxygen tetrahedra and octahedra were calculated to be sequentially increasing as the Cr doping level increases. The samples undergo an antiferromagnetic transition at 250 ± 5 K. The magnetic moments of the samples increase with higher Cr doping level. The 3d electron spin state for Fe³⁺ in the as-prepared samples is different, which is possibly due to the distortion of Fe-O tetrahedra and octahedra in the crystal structure after chromium substitution.     

Dispersion of Fe3O4 suspensions using sodium dodecylbenzene sulphonate as dispersant

Dispersion of Fe₃O₄-water suspension is enhanced with appropriate decision of solution pH and the amount of dispersant, sodium dodecylbenzene sulphonate. Active adsorption of dispersant onto Fe₃O₄ takes place only at pH levels below the isoelectric point. The median diameter is reduced with an increase in the adsorption amount of dispersant at first, and then it increases remarkably with higher adsorption. Change in Fe₃O₄ particle size according to the adsorption amount of dispersant is explained on the basis of contact angle measurements which relate to hydrophobicity or hydrophilicity of Fe₃O₄ particles.     

Crystal structure and ferroelectric properties of Ca(Cu3−xMx)Ti4O12 (M = Fe and Ni) ceramics

M-substituted Ca(Cu_3−xM_x)Ti₄O₁₂ (CCMTO) ceramics, where M = Fe and Ni, were synthesized and the influence of M substitutions for Cu on the crystal structure and ferroelectric properties of CCMTO ceramics were investigated in this study. From the variations in the lattice parameters of CCMTO ceramics, the solubility limit of Ni substitution for Cu in CaCu_3−xNi_xTi₄O₁₂ (CCNTO) ceramics was x = 0.2, whereas that of CaCu_3−xFe_xTi₄O₁₂ (CCFTO) ceramics was x = 0.05. The crystal structural analysis of CCMTO ceramics revealed that the single phase of CCMTO ceramics belongs to the I23 non-centrosymmetric space group of I23; as a result, the P_r and E_c values of CCFTO ceramics at x = 0.05 were 1.8 μC/cm² and 40 kV/cm, respectively. The ferroelectric behavior of CCMTO ceramics by the M substitutions for Cu may be related to the displacement of a Ti⁴⁺ cation in the TiO₆ octahedra and tilting of the Ti–O–Ti angle because of the non-centrosymmetric space group.     

Magnetic monolayer film of oleic acid-stabilized Fe3O4 particles fabricated via Langmuir-Blodgett technique

The fabrication of monolayer film of surfactant-stabilized magnetic Fe₃O₄ particles with a size range of 90–150 nm via the Langmuir-Blodgett method is described in this paper. Magnetic Fe₃O₄ particles coated with oleic acid were firstly synthesized by a hydrothermal process, and then the particles were dispersed into chloroform. After that, the Fe₃O₄ suspension was spread to the interface of air/water and transferred to the glass surface. The formation of the Langmuir monolayer of oleic acid-stabilized Fe₃O₄ particles at air/water interface was revealed with the pressure-area isotherm curves. The results of the surface pressure-area isotherm and Atomic Force Microscopy showed that this film is a well compressed monolayer of 2-dimensional Fe₃O₄ particles assembly. Magnetometry results showed that the saturation magnetization of Fe₃O₄ magnetic particles is 86.1 A·m²/kg at room temperature with an applied field of 0.6 T.