Effect of ultrarapid quenching on the structure and mechanical properties of Nb<Subscript>2</Subscript>O<Subscript>5</Subscript> and Ta<Subscript>2</Subscript>O<Subscript>5</Subscript>

We have studied the detailed structure and mechanical properties of the Nb₂O₅ and Ta₂O₅ pentoxides after ultrarapid quenching in comparison with the properties of Nb₂O₅ and Ta₂O₅ ceramics prepared by a conventional ceramic processing technique and using high-intensity light (HIL) in an optical furnace. The results demonstrate that high-energy processing (HIL and ultrarapid quenching) improves the hardness and strength of Nb₂O₅ and Ta₂O₅. At the same time, HIL processing and quenching lead to structural disordering of the Nb₂O₅ and Ta₂O₅ pentoxides.     

Reactions of V<Subscript>2</Subscript>O<Subscript>5</Subscript>, Nb<Subscript>2</Subscript>O<Subscript>5</Subscript>, and Ta<Subscript>2</Subscript>O<Subscript>5</Subscript> with AlN

Reactions of vanadium, niobium, and tantalum pentoxides with aluminum nitride have been studied using X-ray diffraction. At temperatures from 1000 to 1600°C, we have identified various V, Nb, and Ta nitrides. The composition of the niobium and tantalum nitrides depends on the reaction temperature. The tendency toward nitride formation becomes stronger in the order V₂O₅ < Ta₂O₅ < Nb₂O₅.     

Effects of Nb<Subscript>2</Subscript>O<Subscript>5</Subscript> doping on the microstructure and the dielectric temperature characteristics of barium titanate ceramics

In this work, the effects of Nb₂O₅ addition on the dielectric properties and phase formation of BaTiO₃ were investigated. A core–shell structure was formed for Nb-doped BaTiO₃ resulted from a low diffusivity of Nb⁵⁺ ions into BaTiO₃ when grain growth was inhibited. In the case of 0.3–4.8 mol% Nb₂O₅ additions, two dielectric constant peaks were observed. The Curie dielectric peak was determined by the ferroelectric-paraelectric transition of grain core, whereas the secondary broad peak at lower temperature was due to strong chemical inhomogeneity in Nb-doped BaTiO₃ ceramics. The dielectric constant peak at Curie temperature was markedly depressed with the addition of Nb₂O₅. On the other hand, the secondary dielectric constant peak was enhanced when sintered above 1280 °C for higher Nb₂O₅ concentrations (≥1.2 mol%). The Curie temperature was shifted to higher temperatures, whereas the transition temperature corresponding to the secondary peak moved to lower temperatures as increasing the amount of Nb₂O₅ more than 1.2 mol%. The decrease of this lower transition temperature was assumed to be closely related with the secondary phase formation when Nb concentration greater than 1.2 mol%. From XRD analyses, a large amount of secondary phases was observed when Nb₂O₅ amount exceeded 1.2 mol%. The coefficients of thermal expansion of Nb-doped BaTiO₃ were increased with increasing Nb₂O₅ contents, resulting in large internal stress between cores and shells. Therefore, the shift of Curie temperature to higher temperatures was attributed to internal stress resulting from the formation of a core–shell structure and a large amount of secondary phase grains.     

Effects of Y<Subscript>2</Subscript>O<Subscript>3</Subscript> on the microstructure and electrical properties of Pr-ZnO varistors

Effects of Y₂O₃ contents on the microstructure and electrical properties of Pr₆O₁₁-based ZnO varistor have been studied. The varistor voltage (V_1mA) and the nonlinear exponent () increased with increasing Y₂O₃ contents, whereas the dielectric constant decreased. Y-rich phase segregated at nodal points in grain boundaries. The average grain size decreased with increasing Y₂O₃ content. The specimen with 4.0 mol% Y₂O₃ sintered at 1285 C exhibited the highest nonlinear exponent ( = 77) with the dielectric constant, ~352 at 1 kHz.     

Structural and electrical properties of Ba(Sb<Subscript>1/2</Subscript>Nb<Subscript>1/2</Subscript>)O<Subscript>3</Subscript> ceramic

Lead-free perovskite Ba(Sb_1/2Nb_1/2)O₃ was prepared by conventional ceramic fabrication technique at 1200 °C/5 h in air atmosphere. The crystal symmetry, space group and unit cell dimensions were determined from the experimental results using FullProf software whereas crystallite size and lattice strain were estimated from Williamson–Hall approach. XRD analysis of the compound indicated the formation of a single-phase monoclinic structure with the space group P2/m. EDAX and SEM studies were carried out to evaluate the quality and purity of the compound. Dielectric study revealed the frequency-dependent dielectric anomaly. To find a correlation between the response of the real system and idealized model circuit composed of discrete electrical components, the model fittings were presented using the impedance data. Complex impedance analyses suggested the dielectric relaxation to be of non-Debye type. The correlated barrier hopping model was employed to successfully explain the mechanism of charge transport in Ba(Sb_1/2Nb_1/2)O₃. The ac conductivity data were used to evaluate the density of states at Fermi level, minimum hopping length and apparent activation energy of the compound.     

Effect of high-intensity light on the properties and structure of ceramic Nb<Subscript>2</Subscript>O<Subscript>5</Subscript>

This paper examines the effect of exposure to high-intensity light on the structure, thermal expansion, mechanical properties, and Raman spectrum of ceramic Nb₂O₅. We demonstrate that such exposure creates fractal micro- and nanostructures in ceramic Nb₂O₅, has a significant effect on its thermal expansion, increases its elastic moduli and the anisotropy in its mechanical properties, and produces isolated polyhedra in its crystal structure.     

Effect of La<Subscript>2</Subscript>O<Subscript>3</Subscript> addition on microstructure and electrical properties of ZnO-Pr<Subscript>6</Subscript>O<Subscript>11</Subscript>-based varistor ceramics

The microstructure, electrical properties, and stability of the varistor ceramics, which are composed of ZnO-Pr₆O₁₁-CoO-Cr₂O₃-La₂O₃ (ZPCCL)-based ceramics, were investigated for various La₂O₃ contents. The increase of La₂O₃ content led to more densified ceramics, whereas abruptly decreased the nonlinear properties by incorporating beyond 1.0 mol%. The highest nonlinearity was obtained from 0.5 mol% La₂O₃, in which the nonlinear exponent is 81.6 and the leakage current is 0.1 μA. As the La₂O₃ content increases, the donor concentration and density of interface states were increased from 0.64×10¹⁸ to 16.89×10¹⁸/cm³ and from 2.21×10¹² to 5.16×10¹²/cm², respectively. However, the barrier height greatly decreased with increasing La₂O₃ content, reaching a maximum (1.47 eV) for 0.5 mol% La₂O₃.     

Crystal structure and electrical properties of CaNaBi<Subscript>2</Subscript>Nb<Subscript>3</Subscript>O<Subscript>12</Subscript> ceramics

Monophasic CaNaBi₂Nb₃O₁₂ powders were synthesized via the conventional solid-state reaction route. Rietveld refinement of the X-ray powder diffraction (XRD) data and selected area electron diffraction (SAED) studies confirmed the phase to be a three-layer Aurivillius oxide associated with an orthorhombic B2cb space group. The dielectric properties of the ceramics have been studied in the 300–800 K temperature range at various frequencies (1 kHz to 1 MHz). A dielectric anomaly was observed at 676 K for all the frequencies corresponding to the ferroelectric to paraelectric phase transition as it was also corroborated by the high temperature X-ray diffraction studies. The incidence of the polarization–electric field (P vs. E) hysteresis loop demonstrated CaNaBi₂Nb₃O₁₂ to be ferroelectric.     

Synthesis of anisometric KSr<Subscript>2</Subscript>Nb<Subscript>5</Subscript>O<Subscript>15</Subscript> particles in the SrNb<Subscript>2</Subscript>O<Subscript>6</Subscript>–Nb<Subscript>2</Subscript>O<Subscript>5</Subscript>–KCl system

Anisometric and agglomerate-free template particles are important for fabrication of grain-oriented ceramics. In the present work, preparation of acicular KSr₂Nb₅O₁₅ (KSN) particles was firstly explored in the SrNb₂O₆–Nb₂O₅–KCl system by molten salt synthesis (MSS) method. It was found that the molar ratio of SrNb₂O₆ to Nb₂O₅, the amount of KCl salt and synthesis time could significantly affect the phase structure and morphology of KSN particles. When calcined at 1,150 °C for 6 h with the molar ratio of SrNb₂O₆ to Nb₂O₅ was 1 and the weight ratio of salt to oxide source was 1.50, pure KSN particles with well-developed acicular morphology were successfully obtained in this system. They were agglomerate-free and with proper scale in the size range of 5–30 μm, which made them the ideal templates for fabricating textured ceramics. In addition, some new reaction and growth mechanisms were proposed in this work.     

Effect of Al<Subscript>2</Subscript>O<Subscript>3</Subscript> addition on the microstructure and electrical properties of LaMnO<Subscript>3</Subscript>-based NTC thermistors

A study to develop a new system of negative temperature coefficient thermistors for wide temperature range, A series of Mn-based perovskite-structured ceramics of composition (LaMn_1?x Al _x O₃)_0.9(Al₂O₃)_0.1 has been synthesized by conventional solid state reaction at 1350?°C. The X-ray diffraction patterns showed that for all the samples, the substitution of manganese by aluminum up to x?=?0.1 preserved the rhombohedral perovskite LaMnO₃-like phase. For x?=?0.2, apart from the LaMnO₃-like structure, a second perovskite phase based on the cubic LaAlO₃ structure was formed. For x?=?0.3 and 0.4, the phase present was LaAlO₃ -type structure. The grain sizes of the sintered body detected by scanning electron microscope were decreased with increasing Al₂O₃ content. The resistivity increases with increasing the Al content. The obtained values of ρ _25?°C and B _25/50 and E _a are in the range of 10–13103 Ω cm, 1813–2794 K, 0.156–0.241 eV, respectively. The resistance variation (ΔR/R) was <0.241% and the minimum value (0.0483%) was obtained for aging at 125?°C at 500 h. The aim of this work was explored new composite ceramics materials, which could be used as potential candidates for wide temperature range from ?100 to 500?°C thermistors applications.     

Electrical Properties of the Nb<Subscript>2</Subscript>O<Subscript>5</Subscript>-NiO System

The electrical resistivity of Nb₂O₅-NiO materials was measured in the range 20-500°C. The resistivity of the samples was found to be sensitive to the presence of ammonia or sulfur dioxide in air. Some of the oxides in the Nb₂O₅-NiO system are potentially attractive as materials for temperature and gas sensors.     

Growth of ultrathin Nb<Subscript>2</Subscript>O<Subscript>5</Subscript> films on quartz substrates

Niobium oxide films have been grown by reactive rf sputtering in a vacuum system and characterized by absorption spectroscopy and X-ray diffraction. The thickness of the (optically transparent) films has been determined as a function of sputtering time by examining interference effects in a plane-parallel layer. The average deposition rate is determined to be 7.4 ± 0.3 Å/min (95% confidence interval).     

Dielectric and magnetic properties of Ca(Zn<Subscript>1/3</Subscript>Nb<Subscript>2/3</Subscript>)O<Subscript>3</Subscript>/NiZn ferrite composites

Dense Ca(Zn_1/3Nb_2/3)O₃/NiZn ferrite composites with homogeneously fine microstructures were prepared through conventional solid-state method. The powder XRD patterns confirm the coexistence of the two phases. The dielectric properties in the low frequency range (100 Hz–1 MHz) follow the rule of Maxwell–Wagner interfacial polarization. The dielectric and magnetic properties in the high frequency range (10 MHz–1 GHz) are also reported. The results show that this kind of magnetic–dielectric composites could be used in high-frequency communications for the capacitor-inductor integrating devices such as electromagnetic interference filters and antennas.     

Effects of rare-earth Sm<Subscript>2</Subscript>O<Subscript>3</Subscript> addition on relaxation behavior and electric properties of 0.5PNN-0.5PZT ceramics

Rare-earth Sm₂O₃-doped Pb(Ni_1/3Nb_2/3)_0.5(Zr_0.3Ti_0.7)_0.5O₃ (0.5PNN-0.5PZT + xSm) piezoelectric ceramics were prepared by a two-step solid-state reaction method. The effects of Sm₂O₃ doping on phase structure, electric properties and dielectric relaxation of 0.5PNN-0.5PZT ceramics were investigated. The results showed that Sm³⁺ tended to occupy the B-site of Zr⁴⁺. The XRD patterns showed that all ceramics had a pure perovskite phase structure. With the increasing of Sm₂O₃ addition, Curie temperature moved towards low temperatures obviously and dispersion coefficient γ first increased and then decreased gradually. When x = 0.2 wt%, the γ reaches at maximum (1.998), it was indicated that a nearly complete diffuse phase transition existed and relaxation behaviors enhanced. But the ceramics with x = 0.2 wt% exhibited terrible electric properties: d₃₃ = 605 pC/N, k_p = 0.55, ε_r ~ 5020, tanδ ~ 2.20 %. It showed that the relaxation behaviors have relationships with electric properties to some extent.     

Structural and electrical properties of SiO<Subscript>2</Subscript>–Li<Subscript>2</Subscript>O–Nb<Subscript>2</Subscript>O<Subscript>5</Subscript> glass and glass-ceramics obtained by thermoelectric treatments

Glass and glass-ceramics with the molar composition of 60SiO₂–30Li₂O–10Nb₂O₅ (mole %) were studied. Ferroelectric lithium niobate (LiNbO₃) nanocrystals were precipitated in the glass matrix trough a thermal treatment, with and without the simultaneous application of an external electric field. The as-prepared sample, yellow and transparent, was heat-treated (HT) at 600 and 650 °C and thermoelectric treated (TET) at 600 °C. The applied electric fields were the following ones: (i) 5 × 10⁴ V/m; (ii) 1 × 10⁵ V/m. Differential thermal analysis (DTA), X-ray diffraction (XRD), scanning electron microscopy (SEM), Raman and dielectric spectroscopies were used to investigate the glass samples properties. The LiNbO₃ crystalline phase was detected in the 650 °C HT sample and in the 600 °C TET samples. The presence of an external electric field, during the heating process, promotes the glass crystallization at lower temperatures. In the TET samples, the surface crystallization of the cathode and the anode are different. The number and size of the crystallites, in the glass network, dominate the electrical dc behavior while the ac conductivity process is more dependent of the glass matrix structure. The obtained results reflect the important role carried out by the temperature and the applied electric field in the glass-ceramic structures.     

Dielectric,thermal and mechanical properties of Sr<Subscript>2</Subscript>ZnSi<Subscript>2</Subscript>O<Subscript>7</Subscript> based polymer/ceramic composites

Polymer/Sr₂ZnSi₂O₇ (SZS) ceramic composites suitable for substrate applications have been developed using the polymers polystyrene (PS), high density polyethylene (HDPE) and Di-Glycidyl Ether of Bisphenol A (DGEBA). The dielectric, thermal and mechanical properties of the composites are investigated as a function of various concentrations of the ceramic filler. The obtained values of relative permittivity, dielectric loss tangent, thermal conductivity and coefficient of thermal expansion of the composites are compared with the corresponding theoretical predictions. The relative permittivity of the polymer/ceramic composites increases with filler loading. The dielectric loss tangent also shows the same trend except for DGEBA/SZS composites. The major advantages of the ceramic loading are improvement in thermal conductivity and a decrease in the coefficient of thermal expansion. The tensile strength of the composites decreases with increase in filler content, whereas an improvement is observed in microhardness. The variation of relative permittivity (at 1 MHz) of the composites is also studied as a function of temperature.     

Frequency and temperature dependence of electrical properties of barium and gadolinium substituted SrBi<Subscript>2</Subscript>Nb<Subscript>2</Subscript>O<Subscript>9</Subscript> ceramics

Barium strontium gadolinium bismuth niobate (Ba_0.1Sr_0.81Gd_0.06Bi₂Nb₂O₉, BSGBN) ceramics were prepared by using the conventional solid-state reaction method. The dielectric permittivity, modulus and impedance spectroscopy studies on BSGBN were investigated in the frequency range, 45 Hz–5 MHz and in the temperature range from room temperature (RT) to 570 °C. The dielectric anomaly with a broad peak was observed at 470 °C. Simultaneous substitution of Ba²⁺ and Gd³⁺ increases the transition temperature of SrBi₂Nb₂O₉ (SBN) from 392 to 470 °C. XRD studies in BSGBN revealed an orthorhombic structure with lattice parameters a = 5.4959 Å, b/a = 1.000, c = 25.0954 Å. Impedance and modulus plots were used as tools to analyse the sample behaviour as a function of frequency. Cole-Cole plots showed a non-Debye relaxation. Also, dc and ac conductivity measurements were performed on BSGBN. The electric impedance which describes the dielectric relaxation behaviour is fitted to the Kohlrausch exponential function. Near the phase transition temperature, a stretched exponential parameter β indicating the degree of distribution of the relaxation time has a small value.     

Effects of Cr<Subscript>2</Subscript>O<Subscript>3</Subscript> doping on the microstructure and electrical properties of (Ba,Ca)(Zr,Ti)O<Subscript>3</Subscript> lead-free ceramics

Lead-free ceramics (Ba_0.85Ca_0.15)(Zr_0.1Ti_0.9)O₃?x wt.%Cr₂O₃ (BCZT-xCr) were prepared via the conventional solid-state reaction method. The microstructure and electrical properties of BCZT-xCr samples were systematically studied. XRD and Raman results showed that all samples possessed a single phased perovskite structure and were close to the morphotropic phase boundary (MPB). With the increase of the Cr content, the rhombohedral-tetragonal phase transition temperature (T _R-T) increases slightly, and the Curie temperature (T _C) shifts towards the low temperature side. XPS analysis reveals that Cr³⁺ and Cr^{5 +} ions co-existed in Cr-doped BCZT ceramics, indicating the different impact on the electrical properties from Cr ions as “acceptor” or “donor”. For the x = 0.1 sample, relative high piezoelectric constants d ₃₃ (～316 pC/N) as well as high Q _m (～554) and low tanδ (～0.8%) were obtained. In addition, the AC conductivity was also investigated. Hopping charge was considered as the main conduction mechanism at low temperature. As the temperature increases, small polarons and oxygen vacancies conduction played important roles.     

Study of surface morphology and optical properties of Nb<Subscript>2</Subscript>O<Subscript>5</Subscript> thin films with annealing

Nb₂O₅ films have been deposited on variety of substrates using the sol-gel dip coating technique. As-deposited films on all substrates are amorphous. Films were annealed under controlled ambience at 300, 400 and 600°C for 5 h. As-deposited films on glass substrate show uniform surface structure. The crystal structure and surface topography are found to depend strongly on the annealing temperature and nature of the substrates. The average grain size of 40 nm is observed in films annealed at 300°C. On annealing at 400°C increasing grain size and resulting fusing of them, enhanced surface roughness. Films deposited on NaCl substrates crystallized into a stable monoclinic phase and those deposited on single crystal Si substrates crystallized into hexagonal phase after annealing at 600°C. The as-deposited films show very high transmittance (>90%) in the visible region. The optical band gap is observed to increase from 4.35 eV when the films are in amorphous state to 4.87 eV on crystallization.     

Preparation and electrical properties of Pb(Mg<Subscript>1/3</Subscript>Nb<Subscript>2/3</Subscript>)O<Subscript>3</Subscript>-PbTiO<Subscript>3</Subscript> solid solutions

Ceramic samples of lead magnesium niobate (PMN) and (1 ? x)Pb(Mg_1/3Nb_2/3)O₃?xPbTiO₃ (PMN-PT) solid solutions with x = 0, 0.05, 0.10, and 0.30 have been prepared by solid-state reactions, and their structural, electrical, and piezoelectric properties have been studied using x-ray diffraction, Rietveld profile analysis, impedance spectroscopy, and the resonance/antiresonance method. The results indicate that the use of nonstoichiometric columbite niobates enables the synthesis of phase-pure PMN and PMN-PT.