Nanoenergetic Gas‐Generators: Design and Performance

Nanoenergetic gas‐generator (NGG) mixtures may have various potential military applications from aircraft fuels to rocket propellants, explosives, and primers. To find reactions generating the highest pressure peak, we studied eight nanoenergetic reactions. The Al/Bi₂O₃ reaction generated the highest pressure pulse among the eight thermite reactions. We developed a highly efficient, one step process for synthesis of Bi₂O₃ nanostructured particles. Its use generated about a three times higher peak pressure (∼10 MPa) than when using commercial bismuth oxide nanoparticles (3 MPa). The pressure in the vessel rose very rapidly to a peak value for a duration of ∼0.02 ms and ΔP/Δt of up to 500 GPa s⁻¹. Increasing the crystallinity of the bismuth oxide nanoparticles increased the peak gas pressure by 25%. The maximum pressure×volume (PV) value obtained at m=0.1 g with our synthesized Bi₂O₃ was 707 Pa m³ much higher than that reported in the literature (33 Pa m³) for the same sample mass. Addition of carbon to the reactant mixtures did not increase the peak pressure. Addition of up to 3 wt.‐% of boron to the thermite systems increased the peak pressure by ∼50%.     

Polyaniline‐functionalized magnetic mesoporous nanocomposite: A smart material for the immobilization of lipase

Magnetically separable mesoporous silica nanocomposites with polyoaniline functionalization (Pani‐MS@Fe₃O₄) were synthesized for the immobilization of lipase via electrostatic adsorption. The as‐prepared Pani‐MS@Fe₃O₄ nanocomposites as well as immobilized lipase were characterized by FTIR, XRD, HRTEM, FESEM, BET, and TGA techniques. The BET surface area was calculated to be 779.27 m²/g, 425 m²/g, and 230.45 m²/g for magnetic mesoporous nanoparticle (MS@Fe₃O₄), Pani‐MS@Fe₃O₄ nanocomposite, and lipase immobilized Pani‐MS@Fe₃O₄ nanocomposite respectively. The comparison experiments verified that the immobilized lipase exhibited slightly higher optimal pH and temperature value with a wider pH‐activity and temperature stability in comparison with the free lipase. From Michaelis–Menten kinetic study, the lower K_m value (0.25 mM) and higher V_max value (0.0341 mM/min) for the immobilized lipase revealed the higher affinity of immobilized lipase toward the substrate. Further, reusability studies of the immobilized lipase indicated that up to 70% of the original activity was retained after having been recycled seven times. POLYM. COMPOS. 37:1152–1160, 2016. © 2014 Society of Plastics Engineers     

Synergistic flame retardant effects of activated carbon and molybdenum oxide in poly(vinyl chloride)

The synergistic effects of activated carbon (AC) and molybdenum oxide (MoO₃) in improving the flame retardancy of poly(vinyl chloride) (PVC) were investigated. The effects of AC, MoO₃ and their mixture with a mass ratio of 1:1 on the flame retardancy and smoke suppression properties of PVC were studied using the limiting oxygen index and cone calorimeter tests. It was found that the flame retardancy of the relatively cheaper AC was slightly weaker than that of MoO₃. In addition, the incorporation of AC and MoO₃ greatly reduced the total heat release and improved smoke suppressant property of PVC composites. When the total content of AC and MoO₃ was 10 phr, PVC/AC/MoO₃ had the lowest peak heat release rate and peak smoke production rate values of 173.80 kW m^?2 and 0.1472 m² s^?1, which represented reductions of 47.3 and 59.9%, respectively, compared with those of PVC. Furthermore, thermogravimetric analysis and gel content tests were used to analyze the flame retardant mechanism of AC and MoO₃, with results showing that AC could promote early crosslinking in PVC. Char residue left after heating at 500 °C was analyzed using scanning electron microscopy and Raman spectroscopy, and the results showed that MoO₃ produced the most compact char, with the smallest and most organized carbonaceous microstructures. © 2017 Society of Chemical Industry     

Design and testing of a new smoke concentration meter

The design of a new smoke concentration meter based on light‐extinction measurements with a He‐Ne laser is described. The measurement allows the determination of the mass‐generation rate of smoke and smoke yield during a fire test with little more time or labour than is required for performing heat‐release‐rate and mass‐loss‐rate measurements. The new smoke concentration meter was motivated by the finding from several studies of a nearly universal value of the specific extinction coefficient of post‐flame smoke produced by over ventilated fires. Key design features include the use of a stabilized laser, purge flow to eliminate smoke deposition on the optics, U channel construction to minimize the effect of heating on the optical alignment and beam correction optics. The facility was fabricated almost entirely from commercially available components to allow this design to be easily reproduced by fire research and testing laboratories. The smoke concentration meter was able to measure a smoke yield as small as 0.005 for a propane fire to as large as 0.10 for a toluene pool fire. A detailed uncertainty assessment was made. The result for a 50cm diameter heptane pool fire agrees well with previous smoke yield measurements made for the same fuel and pool diameter based on filter collection and weighing. Copyright © 2000 John Wiley & Sons, Ltd.     

Studies on Micellar Behavior of PEO‐PBO or PEO‐PBO‐PEO Copolymers,or Surface Active Amphiphilic Ionic Liquids in Aqueous Media and Exploration of the Micellar Solutions for Solubilization of Dexamethasone and its Delayed Release

The aggregation behavior of a di‐ and tri‐block copolymers of type PEO‐PBO, PEO‐PBO‐PEO, surface‐active ionic liquid (SAIL) of type 4‐dodecyl‐4‐methylmorpholinium chloride [C₁₂mmor][Cl], and 1‐dodecyl‐1‐methylpyrrolidinium chloride [C₁₂mpyrr][Cl]) in water as well as in 10 mM of a poorly water soluble dexamethasone (dex) aqueous solution was studied by determining the critical micelle concentrations using drug solubilization, surface tension, and isothermal titration calorimetry (ITC) methods. ITC measurements were also made on solutions prepared by mixing the micellar aqueous solutions of copolymers and simple aqueous solutions of SAIL across the mole fractions at three different temperatures (298.15, 308.15, and 318.15 K). The thermodynamic parameters, namely Gibbs free energy (ΔG_m), enthalpy (ΔH_m), and entropy (ΔS_m), of micellization were calculated, and it was observed that the negative ΔG_m and positive ΔS_m for the mixture solutions increase with the increase in mole fraction of SAIL. Otherwise, the micellization is reported to be a spontaneous and highly entropy‐driven process. The dex‐solubilized micellar solutions were mixed with agar to obtain standing gels. The gel samples were dry‐cast into thin films, and the release of dex from films by simple dilution was monitored by UV measurements. The drug release data was fitted to several mechanistic models, and it was inferred that the release mechanism for dex from thin films is non‐Fickian for mixtures and Fickian in copolymer or SAIL micellar aqueous solutions. The transport of dex is diffusion‐controlled with diffusivities of 5.8–12 × 10^?11 m² s^?1 for copolymer micelles, 5–11 × 10^?11 m² s^?1 for micelles of SAIL, and 3–14 × 10^?11 m² s^?1 for the mixed micelles of copolymer and SAIL in aqueous media.     

Influence of Cu2+‐organic montmorillonites on thermal decomposition and smoke emission of poly(vinyl chloride) by cone calorimetric study

Cu²⁺‐Organic montmorillonites were prepared by modifying Na⁺ montmorillonite (Na⁺‐MMT) with silane coupling agents and cupric sulfate. PVC/organic montmorillonite composites were prepared by the melt intercalation method. Morphological structure of modified MMT and PVC/MMT was obtained by using XRD and SEM. The XRD results showed that silanes and Cu²⁺ were intercalated among interlayers and that modified MMT may have exfoliated dispersion in PVC. Effects of Cu²⁺‐organic montmorillonites on decomposition and smoke emission of poly(vinyl chloride) (PVC) in the flaming mode were investigated by using a cone calorimeter at an incident heat flux of 25 kW·m^?2. Cone experimental data demonstrated that the Cu²⁺‐organic montmorillonites prepared were new effective smoke suppressants. They clearly promoted an early HCl elimination, crosslinking reactions, and char residue formation, based upon the decomposition parameters of mass loss, mass loss rate, and time of initial decomposition (t_initial). Cu²⁺‐Organic montmorillonites decreased peak heat release rate, total heat release, peak smoke production rate, total smoke production, and smoke extinction area during the flaming process. The smoke‐reducing efficiency of Cu²⁺‐organic montmorillonites (Cu²⁺‐OMMTs) was the best. However, the content of cupric ion was only 0.6–0.8% in Cu²⁺‐OMMTs and 0.03–0.04% in PVC composites. They may make the smoke‐reducing efficiency reach 45–50%. This result further demonstrates that Cu²⁺ ion is a very effective smoke suppressant for PVC. J. VINYL ADDIT. TECHNOL., 13:31–39, 2007. © 2007 Society of Plastics Engineers.     

Exploring the Biocatalytic Scope of Alditol Oxidase from Streptomyces coelicolor

The substrate scope of the flavoprotein alditol oxidase (AldO) from Streptomyces coelicolor A3(2), recombinantly produced in Escherichia coli, was explored. While it has been established that AldO efficiently oxidizes alditols to D ‐aldoses, this study revealed that the enzyme is also active with a broad range of aliphatic and aromatic alcohols. Alcohols containing hydroxy groups at the C‐1 and C‐2 positions like 1,2,4‐butanetriol (K_m=170 mM, k_cat=4.4 s⁻¹), 1,2‐pentanediol (K_m=52 mM, k_cat=0.85 s⁻¹) and 1,2‐hexanediol (K_m=97 mM, k_cat=2.0 s⁻¹) were readily accepted by AldO. Furthermore, the enzyme was highly enantioselective for the oxidation of 1,2‐diols [e.g., for 1‐phenyl‐1,2‐ethanediol the (R)‐enantiomer was preferred with an E‐value of 74]. For several diols the oxidation products were determined by GC‐MS and NMR. Interestingly, for all tested 1,2‐diols the products were found to be the α‐hydroxy acids instead of the expected α‐hydroxy aldehydes. Incubation of (R)‐1‐phenyl‐1,2‐ethanediol with ¹⁸O‐labelled water (H₂¹⁸O) revealed that a second enzymatic oxidation step occurs via the hydrate product intermediate. The relaxed substrate specificity, excellent enantioselectivity, and independence of coenzymes make AldO an attractive enzyme for the preparation of optically pure 1,2‐diols and α‐hydroxy acids.     

Combustion characteristics of crude oils

Small‐scale free‐burning pool fire tests were conducted in a cone calorimeter to obtain the combustion characteristics of 14 different crude oils. Measurements included the heat release rate based on oxygen consumption calorimetry, mass loss rate, radiative heat flux from the flame to a nearby target, liquid fuel temperature, extinction coefficient and CO₂ and CO concentrations in the exhaust duct. The effective heat of combustion, radiative heat loss fraction and smoke yield were calculated on the basis of the measured data. It was found that the heat release rate, mass loss rate, flame radiation and smoke yield were a function of the type of crude oil. The effective heat of combustion, extinction coefficient and radiative heat loss fraction were nearly constant for the range of crude oils evaluated in this programme. The heat release rate, mass loss rate, flame radiation and smoke yield appeared to correlate well with the crude oil density. Copyright © 2001 John Wiley & Sons, Ltd.     

Improvement of heat removal in solid‐state fermentation tray bioreactors by forced air convection

BACKGROUND: Heat removal is one of the major constraints in large‐scale solid‐state fermentation (SSF) processes. The effect of internal air circulation by forced convection on heat and water transfer has not been studied in SSF tray bioreactors. Formulation of a mathematical model for SSF requires a good estimation of the mass and heat transfer coefficients. RESULTS: A stainless steel tray bioreactor (80.6 L capacity) was used. Aspergillus niger C28B25 was cultivated under SSF conditions on an inert support. Temperature, moisture content, biomass and substrate concentrations were measured. Water and energy integral balances were used to estimate the heat and mass transfer coefficients involved in the process. The Reynolds number (N_Re) in the headspace of the tray bioreactor ranged from 2.5 to 2839, which increased the global heat transfer coefficient from 4.2 to 6.9 (W m^?2 K^?1) and the mass transfer coefficient from 1.0 to 2.1 (g m^?2 s^?1). Mathematical model predictions of the temperature and moisture content of the fermentation bed showed a high goodness‐of‐fit with the experimental results. CONCLUSIONS: This is the first report describing the effect of N_Re of air in the headspace of a SSF tray bioreactor on the heat and mass transfer coefficients and temperature regulation in SSF. Copyright © 2011 Society of Chemical Industry     

A potential antitumor drug (arginine deiminase) reengineered for efficient operation under physiological conditions

Arginine deiminase (ADI, EC 3.5.3.6) is a potential antitumor drug for the treatment of arginine‐auxotrophic tumors such as hepatocellular carcinomas (HCCs) and melanomas, and studies on human lymphatic leukemia cell lines have confirmed that ADI has antiangiogenic activity. Recent studies showed that a combination of taxane and ADI‐PEG20, which induces caspase‐independent apoptosis, is more effective than taxane monotherapy for prostate cancer. The main limitation of ADI from Pseudomonas plecoglossicida (PpADI) and of many other ADI enzymes lies in their pH‐dependent activity profile. PpADI has a pH optimum at 6.5 and a pH shift from 6.5 to 7.5 results in an ～80 % activity drop (the pH of human plasma is 7.35 to 7.45). In 2010, we reported a proof of concept for ADI engineering by directed evolution that resulted in variant M2 (K5T/D44E/H404R). M2 has a pH optimum of pH 7.0, a fourfold higher k_cat value than the wild‐type PpADI (pH 7.4, 0.5 M phosphate buffer), and an increased K_m value for substrate arginine. In our latest work, variants M5 (K5T/D38H/D44E/A128T/H404R) and M6 (K5T/D38H/D44E/A128T/E296K/H404R) were generated by directed evolution by employing PBS buffer (pH 7.4), which mimics physiological conditions. The S_0.5 value of parent M3 (K5T/D44E/A128T/H404R) decreased from 2.01 to 1.48 mM (M5) and 0.81 mM (M6). The S_0.5 value of M6 (0.81 mM ) is lower than that of wild‐type PpADI (1.30 mM ); the k_cat values improved from 0.18 s^?1 (wild‐type PpADI) to 17.56 s^?1 (M5, 97.6‐fold) and 11.64 s^?1 (M6, 64.7‐fold).     

Influences of 4ZnO·B2O3·H2O whisker based intumescent flame retardant on the mechanical,flame retardant and smoke suppression properties of polypropylene composites

In this work, the influences of 4ZnO·B₂O₃·H₂O zinc borate (ZB) whisker based intumescent flame retardant (IFR) containing ammonium polyphosphate and dipentaerythritol on the mechanical, flame retardant and smoke suppression properties of polypropylene (PP) composites were characterized by the universal testing machine, UL-94, limiting oxygen index (LOI), and cone calorimeter tests, respectively. The results indicate that only 1 phr of ZB could effectively improve the LOI value and slow down the burning rate of PP composite. The peak heat release rate, average of HRR, total heat release, peak smoke production rate, and total smoke production values are all decreased from 413.8 kW/m², 166.3 kW/m², 82.3 MJ/m², 0.0995 m²/s, and 17.9 m² for PPc/20IFR composite to 267.8 kW/m², 128.3 kW/m², 66.8 MJ/m², 0.0478 m²/s, and 12.6 m² for PPc/20IFR/1ZB composite, respectively. The scanning electron microscopy images, energy dispersive spectrometry, and Raman spectra of char residue reveal that ZB is helpful to form a compact and graphitized intumescent char residue so that the heat diffusion and oxygen transmission are greatly hindered. The thermogravimetry analysis-fourier transform infrared spectroscopy (TGA-FTIR) results show that less combustible volatiles and more H₂O vapor are generated with the appearance of ZB. Hence, the combustion mechanism in gas phase is suppressed.     

Directed evolution of subtilisin E into a highly active and guanidinium chloride- and sodium dodecylsulfate-tolerant protease

Proteases have niche applications in diagnostic kits that use cell lysis and thereby require high resistance towards chaotropic salts and detergents, such as guanidinium chloride (GdmCl) and sodium dodecylsulfate (SDS). Subtilisin E, a well‐studied serine protease, was selected to be re‐engineered by directed evolution into a “chaophilic” protease that would be resistance to GdmCl and SDS, for application in diagnostic kits. In three iterative rounds of directed evolution, variant SeSaM1–5 (S62I/A153V/G166S/I205V) was generated, with improved activity (330 %) and increased half life in 1 M GdmCl (<2 min to 4.7 h) or in 0.5 % SDS (<2 min to 2.7 h). Saturation mutagenesis at each site in the wild‐type subtilisin E revealed that positions 62 and 166 were mainly responsible for increased activity and stability. A double mutant, M2 (S62I/G166M), generated by combination of the best single mutations showed significantly improved kinetic constants; in 2 M GdmCl the K_m value decreased (29‐fold) from 7.31 to 0.25 mM , and the k_cat values increased (fourfold) from 15 to 61 s^?1. The catalytic efficiency, k_cat/K_m, improved dramatically (GdmCl: 247 mM ^?1 s^?1 (118‐fold); SDS, 179 mM ^?1 s^?1 (13‐fold)). In addition, the SeSaM1–5 variant showed higher stability in 2.0 % SDS when compared to the wild‐type (t_1/2 54.8 min (>27‐fold)). Finally, molecular dynamics simulations of the wild‐type subtilisin E showed that Gdm⁺ ions could directly interact with active site residues, thereby probably limiting access of the substrate to the catalytic centre.     

Self-emulsification synthesis of epoxy phosphate ester and its flame-retardant mechanism in flexible poly(vinyl chloride)/magnesium hydroxide composites

A trade-off dilemma exists for simultaneously improving the mechanical properties and flame resistance of flexible polyvinyl chloride (fPVC)/magnesium hydroxide (MH) composites. In this study, epoxy phosphate ester (EPE), a hydrophobic surface modifier of MH, was synthesized using a self-emulsification method. After modification, EPE was bonded to the surface of MH (MHEPE) without altering its morphology. The results of limiting oxygen index and cone calorimetry tests indicated that fPVC/MHEPE exhibited better flame retardancy and smoke suppression effects than did fPVC/MH. The peak of the heat release rate, total heat release, peak of the smoke production rate, and total smoke production of the fPVC/MHEPE composite were 206.0 kJ m⁻², 45.90 MJ m⁻², 0.0729 m² s⁻¹, and 9.88 m², which were 8.64%, 14.00%, 27.61%, and 9.02% lower than those of the fPVC/MH composite, respectively. For the fPVC/MHEPE composite, a compact and continuous char residue formed, which could inhibit heat and flammable volatile migration between the matrix and burning zones. In the gas phase, the dilution effect of H₂O vapor reduced the concentrations of O₂ and flammable volatiles. The free-radical quenching effect of ·PO and ·PO₂ also played a vital role in extinguishing flame and terminating combustion. Further, the introduction of EPE improved the tensile and impact strengths of the fPVC/MH composites because of the excellent interfacial compatibility between MHEPE and the fPVC matrix. This study provides a simple and workable solution for the trade-off dilemma, and the remarkable flame retardancy and mechanical properties of the fPVC/MHEPE composite render it a promising cable material.     

A Study on CO2 Absorption Kinetics by Aqueous Solutions of N,N‐Diethylethanolamine and N‐Ethylethanolamine

N‐Ethylethanolamine (EEA) and N,N‐diethylethanolamine (DEEA) represent promising candidate alkanolamines for CO₂ removal from gaseous streams, as they can be prepared from renewable resources. In this work, the reaction rate constant for the reaction between CO₂ and EEA was determined from the absorption rate measurements of CO₂ in a blend comprising DEEA, EEA and H₂O. A stirred‐cell reactor with a plane, horizontal gas‐liquid interface was used for the absorption studies. While the DEEA concentration in the formulated solution was varied in the range of 1.5–2.5 kmol/m³, the initial EEA concentration was 0.1 kmol/m³. A zwitterion mechanism for EEA and a base‐catalyzed hydration mechanism for DEEA were used to describe the reaction kinetics. At 303 K, the second‐order reaction rate constant for the CO₂ reaction with EEA was found to be 8041 m³/(kmol s). The liquid‐side mass transfer coefficient was also estimated, and its value (0.004 cm/s) is in line with those typical of stirred‐cell reactors.     

Modelling of Cr(VI) removal from polluted groundwaters by ion exchange

This work reports the viability and modelling of the removal of Cr(VI) from polluted groundwaters by means of ion exchange using the resin Lewatit MP‐64. Feed groundwaters that contained Cr(VI) at an average concentration of 2431 mg dm^?3 and 1187 mg dm^?3 of chloride and 1735 mg dm^?3 of sulfate as main anions were acidified to a pH of 2.0 prior to the removal process. Dynamic experiments were carried out in a fixed bed column with feed waters at flow rates in the range of 2.78 × 10^?7 m³ s^?1 to 5.55 × 10^?7 m³ s^?1. Regeneration was achieved with NaOH (2 mol dm^?3). From the experimental results, the equilibrium of the ion exchange reaction was successfully modelled, obtaining an equilibrium constant (K′_AB) = 44.90. Finally, a mass balance that included mass transfer resistances in the liquid and solid phases was developed and from the comparison between simulated and experimental data the value of the effective intraparticle diffusivity (D_s) was determined as 1.43 × 10^?12 m² s^?1. Copyright © 2004 Society of Chemical Industry     

Determination of overall mass transport coefficients in gas diffusion electrodes

Gas diffusion electrodes are used for many purposes, for example in fuel cells, in synthesis and as anodes in electrodeposition processes. The behaviour of gas diffusion electrodes has been the subject of many studies. In this work the transport of gas in the gas diffusion electrode, characterized by the overall mass transport coefficient, has been investigated using hydrogen-nitrogen mixtures. A reactor model for the gas compartment of the gas diffusion electrode test cell is proposed to calculate the concentration of hydrogen in the gas compartment as a function of the input concentration of hydrogen and the total volumetric gas flow rate. The mass transport coefficient is found to be independent of variations in hydrogen concentration and volumetric gas flow rate. The temperature dependence of the mass transport coefficient has been determined. A maximum was found at 40°C.Notation Agd geometric electrode surface area (m²) - C _in concentration of reactive component at the inlet of the gas compartment (mol m^–3) - c _out concentration of reactive component at the outlet of the gas compartment (mol m^–3) - E potential (V) - E _e equilibrium potential (V) - E _t upper limit potential (V) - F _v volumetric flow rate (m^–3 s^–1) - F _v,H volumetric flow rate of hydrogen (m^–3 s^–1) - F _v,N volumetric flow rate of nitrogen (m^–3 s^–1) - F _vin volumetric flow rate at the inlet of the gas compartment (m^–3 s^–1) - F _v,out volumetric flow rate at the outlet of the gas compartment (in ^–3 s^–1) - F _v,reaction volumetric flow rate of reactive component into the gas diffusion electrode (m^–3 s^–1) - Faraday constant (A s mo^–1) - I _gd current for gas diffusion electrode (A) - i _gd current density for gas diffusion electrode (A m^–2) - I _gd,1 diffusion limited current for gas diffusion electrode (A) - i _gd,1 diffusion limited current density for gas diffusion electrode (A m^–2) - I _gd,1,calc calculated diffusion limited current for gas diffusion electrode (A) - i _gd,1,calc calculated diffusion limited current density for gas diffusion electrode (A m^–2) - I _hp current for hydrogen production (A) - k _s mass transport coefficient calculated from c _out (m s^–1) - n number of electrons involved in electrode reaction - T temperature (°C) - V _m molar volume of gas (m³ mol^–1) - overpotential (V)     

Particle Morphology and Density Characterization by Combined Mobility and Aerodynamic Diameter Measurements. Part 2: Application to Combustion-Generated Soot Aerosols as a Function of Fuel Equivalence Ratio

Composition, shape factor, size, and fractal dimension of soot aerosol particles generated in a propane/O₂, flame were determined as a function of the fuel equivalence ratio (φ). Soot particles were first size-selected by a differential mobility analyzer (DMA) and then analyzed by an Aerodyne aerosol mass spectrometer (AMS). The DMA provides particles of known mobility diameter (d_m ). The AMS quantitatively measures the mass spectrum of the nonrefractory components of the particles and also provides the vacuum aerodynamic diam eter (d_va ) corresponding to the particles of known mobility diameter. The measured d_m, d_va , and nonrefractory composition are used in a system of equations based on the formulation presented in the companion article to estimate the particle dynamic shape factor, total mass, and black carbon (BC) content. Fractal dimension was estimated based on the mass-mobility relationship. Two types of soot particles were observed depending on the fuel equivalence ratio. Type 1: for φ < 4 (lower propane/O₂), d_va ; was nearly constant and independent of d_m . The value of d_va increased with increasing φ. Analysis of the governing equations showed that these particles were highly irregular (likely fractal aggregates), with a dynamic shape factor that increased with d_m and φ. The fractal dimension of these particles was approximately 1.7. These particles were composed mostly of BC, with the organic carbon content increasing as φ increased. At φ = 1.85, the particles were about 90% BC, 5% PAH, and 5% aliphatic hydrocarbon (particle density = 1.80 g/cm³). Type 2: for φ > 4 (high propane/O₂), d_va was linearly proportional to d_m . Analysis of the governing equations showed that these particles were nearly spherical (likely compact aggregates), with a dynamic shape factor of 1.1 (versus 1 for a sphere) and a fr actal dimension of 2.95 (3 for a sphere). These particles were composed of about 50% PAH, 45% BC, and 5% aliphatic hydrocarbons (particle density = 1.50 g/cm³). These results help interpret some measurement s obtained in recent field studies.     

Determination of Ni and Zn in an Oil Matrix using Schiff Base‐Assisted Extraction Followed by a Flame Atomic Absorption Spectrometer: A Simple Strategy to Determine Ni and Zn

In the present work, a new and simple Schiff base‐assisted extraction strategy for Ni and Zn from an edible oil matrix with subsequent determination using a flame atomic absorption spectrometer was suggested. According to the green approach, laborious sample‐pretreatment procedures were eliminated via complexation of the analytes with N,N′‐bis(4‐methoxysalycylidene)‐2‐hydroxy‐1,3‐propanediamine (4MSHP) and transferred from the oil phase to the aqueous phase. The complexation properties of 4MSHP, Ni, and Zn were investigated using UV–vis spectrophotometry. The experimental conditions that affect the extraction efficiency were optimized using central composite design. The optimum conditions for the extraction of Ni and Zn were as follows: a volume to oil mass ratio of 0.83 to 1.31 mL g^?1 of 4MSHP solution; 62.3‐ and 50.6‐min, stirring time; 27.3 and 31.1 °C, temperature, respectively. The detection limits (3s_bm^?1) were 0.41 μg g^?1 for Ni and 0.16 μg g^?1 for Zn. Validation of the suggested work was performed by the analysis of organometallic standard‐doped n‐hexane solutions as certified reference materials under the optimum experimental conditions. The recovery percentages were warranted the accuracy and found as 98.2 ± 1.8% for Ni and 99.8 ± 1.2% for Zn. In addition, relative SD values were below 5% for both the analytes. The Student's t‐test showed that there was no significant difference between the found and doped amount of analytes at 95% confidence level. The features such as the detection technique, cheapness, eco‐friendly solvent usage, and practicality were better compared to the literature.     

The effect of the type of electric current on the cathodic corrosion of aluminium

A comparative experimental study on the cathodic corrosion of aluminium in 0.52 M sodium chloride distilled water solutions is carried out. The electrolysis is conducted using a single half-cycle rectified, direct or industrial frequency current. Characteristic relationships concerning the cathodic corrosion are noted. Attention is drawn to the higher rates of cathodic corrosion observed on electrolysis with single half-cycle rectified current which is combined with lower energy costs.Nomenclature w _k1 cathodic corrosion rate for direct current electrolysis (g s^–1 m^–2) - w_k2 cathodic corrosion rate for single half-cycle rectified current electrolysis (g s^–1 m^–2) - w _a anodic dissolution rate (g s^–1 m^–2) - w _F theoretical Faradaic dissolution rate (g s^–1 m^–2) - w dissolution rate for alternating current electrolysis (g s^–1 m^–2) - j electric current density (A m^–2)     

Study on the ablative properties of ethylene propylene diene terpolymer/silsesquioxane insulation materials

Octaphenylsilsesquioxane (OPS), polyphenylsilsesquioxane (PPSQ), and octavinylsilsesquioxane (OVP) have been incorporated into ethylene propylene diene terpolymer (EPDM) in order to study their effects on the ablative properties of the respective EPDM composites. The results show that PPSQ and OVP serve as effective ablative additives for EPDM composites. The linear ablation rates of EPDM composites with 4.4 wt % OVP or PPSQ were reduced by 21 or 16.5%, respectively, compared with the control sample. Moreover, OVP and PPSQ also improved the flame retardancy and suppressed smoke emission. The heat release rate of EPDM composite with 4.4 wt % OVP was measured as 90.6 kW m⁻², 17% lower than that of the control sample, and the same amount of PPSQ reduced the total smoke release from 1946 to 1497 m² s⁻¹. Thermogravimetric analysis results showed EPDM/OVP composite to leave a higher residual mass than the calculated value. Besides, scanning electron microscopy, cone calorimetry (CONE), and BET tests showed that the chars formed during the ablation of EPDM composites containing OVP and PPSQ had better structural stability and thermal stability owing to the fact that they were denser and more homogeneous. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48365.