Synthesis and swelling behavior of metal-chelating superabsorbent hydrogels based on sodium alginate-<Emphasis Type="Italic">g</Emphasis>-poly(AMPS-<Emphasis Type="Italic">co</Emphasis>-AA-<Emphasis Type="Italic">co</Emphasis>-AM) obtained under microwave irradiation

A metal-chelating superabsorbent hydrogel based on poly(2-acrylamido-2-methylpropanesulfonic acid-co-acrylic acid-co-acrylamide) grafted onto sodium alginate backbone, NaAlg-g-poly(AMPS-co-AA-co-AM) is prepared under microwave irradiation. The Taguchi method is used for the optimization of synthetic parameters of the hydrogel based on water absorbency. The Taguchi L₉ (3⁴) orthogonal array is chosen for experimental design. Mass concentrations of crosslinker MBA \(C_{\text{MBA}}\) initiator KPS \(C_{\text{KPS}}\), sodium alginate \(C_{\text{NaAlg}}\) and mass ratio of monomers \(C_{\text{AM/AA/AMPS}}\) are chosen as four factors. The analysis of variance of the test results indicates the following optimal conditions: 0.8 g L^?1 of MBA, 0.9 g L^?1 of KPS, 8 g L^?1 of NaAlg and \(R_{\text{AM/AA/AMPS}}\) equals to 1:1.1:1.1. The maximum water absorbency of the optimized final hydrogel is found to be 822 g g^?1. The relative thermal stability of the optimized hydrogel in comparison with sodium alginate is demonstrated via thermogravimetric analysis. The prepared hydrogel is characterized by FTIR spectroscopy and scanning electron microscopy. The influence of the environmental parameters on water absorbency such as the pH and the ionic force is also investigated. The optimized hydrogel is used as adsorbent for hazardous heavy metal ions Pb(II), Cd(II), Ni(II) and Cu(II) and their competitive adsorption is also discussed. Isotherm of adsorption and effect of pH, adsorption dosage and recyclability are investigated. The results show that the maximum adsorption capacities of lead and cadmium ions on the hydrogel are 628.93 and 456.62 mg g^?1, respectively. The adsorption is well described by Langmuir isotherm model. The hydrogel is also utilized for the loading of potassium nitrate as an active agrochemical agent and the release of this active agent has also been investigated.     

Synthesis and properties of silk sericin-<Emphasis Type="Italic">g</Emphasis>-poly(acrylic acid-co-acrylamide) superabsorbent hydrogel

A novel superabsorbent hydrogel has been synthesized with the crosslinking graft copolymerization of acrylic acid (AA) and acrylamide onto the chain of silk sericin. Potassium persulfate (KPS)–sodium sulfite (NaHSO₃) as redox initiation system and N,N′-methylenebisacrylamide (MBA) as crosslinker were used. The structure of the product characterized by Fourier transform infrared absorption spectroscopy and the surface morphology of the hydrogel were observed by scanning electron microscopy. The certain parameters of the graft copolymerization including the monomer, the initiator, the crosslinker concentration, neutralization degree of AA, reaction temperature, and time were systematically optimized to achieve a hydrogel with maximum swelling capacity (2150 g/g). The optimal conditions were initiator 8 mmol/L, MBA 2.5 mmol/L, neutralization degree of AA 75%, reaction temperature 55 °C, and time 6 h. The swelling ratio in salt solutions was also determined (in 0.9% NaCl aqueous solution: 98 g/g). In addition, the swelling capability of the hydrogel was measured in solutions with pH ranged from 1 to 13. The synthesized hydrogel exhibited a pH-dependent character. Water absorbency of the product in aqueous chloride salt solutions has the Na⁺ > Ca²⁺ > Mg²⁺ > Al³⁺ order in the investigated concentration.     

Ultralow ppm <Emphasis Type="Italic">se</Emphasis>ATRP synthesis of PEO-<Emphasis Type="Italic">b</Emphasis>-PBA copolymers

Poly(ethylene oxide)-block-poly(butyl acrylate) copolymers were prepared via simplified electrochemically mediated atom transfer radical polymerization (seATRP) utilizing only 1 ppm of Cu^II complex, which is the limit of a successful well-controlled polymerization. The presented seATRP system works under potentiostatic and galvanostatic conditions. The polymerization results showed similar molecular weight evolution while maintaining a narrow molecular weight distribution throughout the reactions. ¹H NMR results confirm chemical structure of synthesized diblock copolymers. This ultralow ppm technique is promising candidate for polymerization from nanoparticles, flat surfaces, proteins, and DNA.     

UV-induced synthesis of chitosan-<Emphasis Type="Italic">g</Emphasis>-polyacrylamide semi-IPN superabsorbent hydrogels

Superabsorbent hydrogels of chitosan-g-polyacrylamide with N,N′-methylene-bis-acrylamide as a crosslinker were prepared via UV irradiation in the absence of photoinitiator under homogeneous conditions. The product was characterized by Fourier transform infrared spectroscopy, differential scanning calorimetry, and scanning electron microscopy to confirm the formation of hydrogels. The transparent hydrogels have been observed to exhibit as much as 2987% swelling in acidic solution. In addition, the hydrogel which hydrolyzed for 6 h (0.24 × 10³ min) can have a water uptake of 106 times its weight (5300% swelling for 0.5 g hydrogel). The effect of several variables such as time, temperature, pH, acrylamide/chitosan ratio, crosslinker amount, and different media was explored. Finally, the prepared hydrogel have been used in adsorption of Zn(II) ions from water with high removal efficiency (0.636 meq g⁻¹ or 20.8 mg g⁻¹) at pH = 7. The experimental data of the adsorption equilibrium from Zn(II) solution fit well with the pseudo-second-order model.     

Bioengineering functional copolymers: synthesis and characterization of poly(<Emphasis Type="Italic">N</Emphasis>-isopropyl acrylamide-<Emphasis Type="Italic">co</Emphasis>-3,4-2H-dihydropyran)s

Novel bioengineering copolymers were synthesized by radical copolymerization of N-isopropylacrylamide (NIPA) and 3,4-2H-dihydropyran (DHP) with 2,2′-azobisisobutyronitrile as an initiator in acetone solution at 70 °C under nitrogen atmosphere. Structure, tacticity and compositons of the copolymers prepared in a wide range of monomer feed were confirmed by FTIR, ¹H{¹³C} NMR-DEPT and elemental analyses. The monomer reactivity ratios (r ₁ and r ₂) were detected using known two methods: r ₁ (NIPA)?=?1.25 and r ₂?=?0.035 (DHP), and r ₁ (NIPA) ?=?0.97 and r ₂?=?0.022 (DHP) by Kelen-Tüdös and Jaacks methods, respectively. It was demonstrated that the studied monomer pair has a tendency to form H-bonding beween amide/ether groups through ?NH...O< complexation which played an important role in the stereoselective chain growth, and significant decrease of allyl degradative chain transfer reactions. This phenomenon is also confirmed by the observed relatively high molecular weights of copolymers (M _v ). The synthesized water-soluble stimuli-responsive poly(NIPA-co-DHP)s exhibit thermal stability, higher glass-transition temperature, polyelectrolyte, pH- and temperature-sensitive behavior and can be attributed to the class of bioengineering functional copolymers useful for various bio- and gene-engineering, and drug delivery applications.     

Novel amphiphilic temperature responsive graft copolymers PCL-<Emphasis Type="Italic">g</Emphasis>-P(MEO<Subscript>2</Subscript>MA-<Emphasis Type="Italic">co</Emphasis>-OEGMA) via a combination of ROP and ATRP: synthesis,characterization, and sol-gel transition

A series of well-defined novel amphiphilic temperature-responsive graft copolymers containing PCL analogues P(αClεCL-co-εCL) as the hydrophobic backbone, and the hydrophilic side-chain PEG analogues P(MEO₂MA-co-OEGMA), designated as P(αClεCL-co-εCL)-g-P(MEO₂MA-co-OEGMA) have been prepared via a combination of ring-opening polymerization (ROP) and atom transfer radical polymerization (ATRP). The composition and structure of these copolymers were characterized by ¹H NMR and GPC analyses. The self-assembly behaviors of these amphiphilic graft copolymers were investigated by UV transmittance, a fluorescence probe method, dynamic light scattering (DLS) and transmission electron microscopy (TEM) analyses. The results showed that the graft copolymers exhibited the good solubility in water, and was given the low critical temperature (LCST) at 35(±1) °C, which closed to human physiological temperature. The critical micelle concentrations (CMC) of P(αClεCL-co-εCL)-g-P(MEO₂MA-co-OEGMA) in aqueous solution were investigated to be 2.0 × 10^?3, 9.1 × 10^?4 and 1.5 × 10^?3 mg·mL^?1, respectively. The copolymer could self-assemble into sphere-like aggregates in aqueous solution with diverse sizes when changing the environmental temperature. The vial inversion test demonstrated that the graft copolymers could trigger the sol-gel transition which also depended on the temperature.     

(1<Emphasis Type="Italic">S</Emphasis>,3<Emphasis Type="Italic">R</Emphasis>)-<Emphasis Type="Italic">cis</Emphasis>-Chrysanthemyl Tiglate: Sex Pheromone of the Striped Mealybug, <Emphasis Type="Italic">Ferrisia virgata</Emphasis>

Derivatives of 2,2-dimethyl-3-(2-methylprop-1-enyl)cyclopropanecarboxylic acid (chrysanthemic acid) are classic natural pyrethroids discovered in pyrethrum plants and show insecticidal activity. Chrysanthemic acid, with two asymmetric carbons, has four possible stereoisomers, and most natural pyrethroids have the (1R,3R)-trans configuration. Interestingly, chrysanthemic acid–related structures are also found in insect sex pheromones; carboxylic esters of (1R,3R)-trans-(2,2-dimethyl-3-(2-methylprop-1-enyl)cyclopropyl)methanol (chrysanthemyl alcohol) have been reported from two mealybug species. In the present study, another ester of chrysanthemyl alcohol was discovered from the striped mealybug, Ferrisia virgata (Cockerell), as its pheromone. By means of gas chromatography–mass spectrometry, nuclear magnetic resonance spectrometry, and high-performance liquid chromatography analyses using a chiral stationary phase column and authentic standards, the pheromone was identified as (1S,3R)-(?)-cis-chrysanthemyl tiglate. The (1S,3R)-enantiomer strongly attracted adult males in a greenhouse trapping bioassay, whereas the other enantiomers showed only weak activity. The cis configuration of the chrysanthemic acid–related structure appears to be relatively scarce in nature, and this is the first example reported from arthropods.     

Yellow-Cedar, <Emphasis Type="Italic">Callitropsis</Emphasis> (<Emphasis Type="Italic">Chamaecyparis</Emphasis>) <Emphasis Type="Italic">nootkatensis</Emphasis>, Secondary Metabolites,Biological Activities,and Chemical Ecology

Yellow-cedar, Callitropsis nootkatensis, is prevalent in coastal forests of southeast Alaska, western Canada, and inland forests along the Cascades to northern California, USA. These trees have few microbial or animal pests, attributable in part to the distinct groups of biologically active secondary metabolites their tissues store for chemical defense. Here we summarize the new yellow-cedar compounds identified and their biological activities, plus new or expanded activities for tissues, extracts, essential oils and previously known compounds since the last review more than 40 years ago. Monoterpene hydrocarbons are the most abundant compounds in foliage, while heartwood contains substantial quantities of oxygenated monoterpenes and oxygenated sesquiterpenes, with one or more tropolones. Diterpenes occur in foliage and bark, whereas condensed tannins have been isolated from inner bark. Biological activities expressed by one or more compounds in these groups include fungicide, bactericide, sporicide, acaricide, insecticide, general cytotoxicity, antioxidant and human anticancer. The diversity of organisms impacted by whole tissues, essential oils, extracts, or individual compounds now encompasses ticks, fleas, termites, ants, mosquitoes, bacteria, a water mold, fungi and browsing animals. Nootkatone, is a heartwood component with sufficient activity against arthropods to warrant research focused toward potential development as a commercial repellent and biopesticide for ticks, mosquitoes and possibly other arthropods that vector human and animal pathogens.     

Synthesis of poly(<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide-<Emphasis Type="Italic">b</Emphasis>-<Emphasis Type="Italic">N</Emphasis>-vinylcarbazole) copolymers via RAFT polymerization and its stimuli responsive morphology in aqueous media

Here, we report the successful synthesis of series of stimuli responsive amphiphilic diblock copolymers (SRABCs) poly(N-isopropylacrylamide-b-N-vinylcarbazole) [poly(NIPAAm-b-NVK)] through reversible addition fragmentation chain transfer (RAFT) polymerization. Copolymers with fixed hydrophilic [poly(NIPAAm)] block length and variable (with three different) hydrophobic [poly(NVK)] block lengths were synthesized and the block length ratio was confirmed from their molecular weight data. The self-assembly nature of synthesized block copolymers was confirmed by determining critical micelle concentration (CMC). Self-assembled block copolymers showed rice-grain like morphology for copolymers having equivalent hydrophobic/hydrophilic chain length but in case of block copolymers having smaller and bigger hydrophobic chain length with respect to hydrophilic chain length displayed vesicular morphology. The thermo and pH responsiveness of the block copolymers was found to be influenced by variation in length and chemical composition of the blocks. Due to their thermo and pH responsiveness resulted self-assembled structures underwent morphology transitions from vesicular and rice grain like to micellar structure in aqueous medium. The probable applications of the studied stimuli responsive amphiphilic diblock copolymers can be found in the nanotechnology and biotechnology are indicated.

Open image in new window

Graphical abstract Synthesis, self-assembly and stimuli responsiveness of poly(NIPAAm-b-NVK) copolymers.

     

Synthesis,Characterization and Properties of <Emphasis Type="Italic">N</Emphasis>-Alkyl-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-di(2-hydroxyethyl) Amine Oxides

N‐Dodecyl‐N,N‐di(2‐hydroxyethyl) amine oxide (C₁₂DHEAO) and N‐stearyl‐N,N‐di(2‐hydroxyethyl) amine oxide (C₁₈DHEAO) were synthesized with N‐alkyl‐diethanolamine and hydrogen peroxide. Their chemical structures were confirmed using ¹H‐NMR spectra, mass spectral fragmentation and FTIR spectroscopic analysis. It was found that C₁₂DHEAO and C₁₈DHEAO reduced the surface tension of water to a minimum value of approximately 28.75 mN m^?1 at concentration of 2.48 × 10^?3 mol L^?1 and 32.45 mN m^?1 at concentration of 5.21 × 10^?5 mol L^?1, respectively. The minimum interfacial tension (IFT_min) and the dynamic interfacial tension (DIT) of oil–water system were measured. When C₁₈DHEAO concentration was in the range of 0.1–0.5%, the IFT_min between liquid paraffin and C₁₈DHEAO solutions all reached the ultra‐low interfacial tension. Furthermore, their foam properties were investigated by Ross‐Miles method, and the height of foam of C₁₂DHEAO was 183 mm. It was also found that they showed strong emulsifying power.     

Synthesis,characterization and antibacterial activity of quaternized <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">O</Emphasis>-(2-carboxyethyl) chitosan

N,O-(2-carboxyethyl)chitosan (N,O-2-CEC) was prepared from chitosan with 3-chloropropionic acid as modifying agent and NaOH as catalyst. Different quaternary ammonium groups were introduced into N,O-2-CEC by the reaction between N,O-2-CEC and different 2,3-epoxypropyl trialkyl ammonium chlorides in the presence of 25% NaOH aqueous solution, and obtained different quaternized N,O-2-carboxyethyl chitosans (QCECs). Structures of QCECs were characterized by FT-IR, ¹HNMR and gel permeation chromatography (GPC). Antimicrobial activity of QCECs was evaluated against a gram-negative bacterium Escherichia coli and a gram-positive bacterium Staphylococcus aureus. Compared with N,O-2-CEC and quaternized chitosans, the QCECs had much stronger antimicrobial activity, which increased with increasing chain length of the alkyl in the quaternary ammonium groups. The presence of benzyl in quaternary ammonium groups could endow QCECs with much better antimicrobial activity.     

Synthesis,characterization and thermal dehydration and degradation kinetics of chitosan Schiff bases of <Emphasis Type="Italic">o</Emphasis>-, <Emphasis Type="Italic">m</Emphasis>- and <Emphasis Type="Italic">p</Emphasis>-nitrobenzaldehyde

The chitosan Schiff bases were synthesised through the condensation reaction of chitosan with o-, m- and p-nitrobenzaldehyde (abbreviated as CSB-o, CSB-m and CSB-p) in the ratio 1:1 and were characterised by means of FTIR, UV, XRD and SEM. The thermal dehydration and degradation kinetics of all these Schiff bases were studied using different isoconversional and maximum rate (peak) methods, viz. Kissinger–Akahira–Sunose (KAS), Tang, Starink, Flynn–Wall–Ozawa (FWO) and Bosewell from DSC data and the thermal stability from TG. The activation energy values of thermal dehydration and degradation reactions obtained from isoconversional methods of FWO and Bosewell are slightly higher than that obtained from other methods. All the isoconversional and maximum rate (peak) methods yielded consistent values of E _α for both the dehydration and degradation reactions and is in the order CSB-o < CSB-m < CSB-p. The Schiff bases observed (from TG) the same order of thermal stability.     

Molecular-hydrodynamic study of poly(<Emphasis Type="Italic">N</Emphasis>-methyl-<Emphasis Type="Italic">N</Emphasis>-vinylacetamide) macromolecules

High-velocity sedimentation, translational isothermal diffusion, and viscometry in H₂O and DMF are used to investigate the samples and fractions of poly(N-methyl-N-vinylacetamide) synthesized by free-radical polymerization and fractionated in a chloroform-diethyl ether system. Molecular masses M and the Mark-Kuhn-Houwink-Sakurada relations are obtained for the fractions in the molecular mass range M × 10⁻³ = 3.5−540.0. The negative temperature coefficient of intrinsic viscosity is revealed for both solvents. The length of the Kuhn statistical segment and the hydrodynamic diameter of poly(N-methyl-N-vinylacetamide) macromolecules are estimated; the hydrodynamic volumes occupied by water-soluble poly(N-methyl-N-vinylacetamide), poly(1-vinyl-2-pyrrolidone), poly(vinylformamide), and pullulan molecules are compared.     

Nanoparticles of Block Ionomer Complexes from Double Hydrophilic Poly(acrylic acid)-<Emphasis Type="Italic">b</Emphasis>-poly(ethylene oxide)-<Emphasis Type="Italic">b</Emphasis>-poly(acrylic acid) Triblock Copolymer and Oppositely Charged Surfactant

The novel water-dispersible nanoparticles from the double hydrophilic poly(acrylic acid)-b-poly(ethylene oxide)-b-poly(acrylic acid) (PAA-b-PEO-b-PAA) triblock copolymer and oppositely charged surfactant dodecyltrimethyl ammonium bromide (DTAB) were prepared by mixing the individual aqueous solutions. The structure of the nanoparticles was investigated as a function of the degree of neutralization (DN) by turbidimetry, dynamic light scattering (DSL), ζ-potential measurement, and atomic force microscope (AFM). The neutralization of the anionic PAA blocks with cationic DTAB accompanied with the hydrophobic interaction of alkyl tails of DTAB led to formation of core–shell nanoparticles with the core of the DTAB neutralized PAA blocks and the shell of the looped PEO blocks. The water-dispersible nanoparticles with negative ζ-potential were obtained over the DN range from 0.4 to 2.0 and their sizes depended on the DN. The looped PEO blocks hindered the further neutralization of the PAA blocks with cationic DTAB, resulting in existence of some negative charged PAA-b-PEO-b-PAA backbones even when DN > 1.0. The spherical and ellipsoidal nature of these nanoparticles was observed with AFM.     

Mechanical and thermal characterization of <Emphasis Type="Italic">cis</Emphasis>-polyisoprene and <Emphasis Type="Italic">trans</Emphasis>-polyisoprene blends

Measurements of mechanical and thermal transport properties have been made on the blends of cis-polyisoprene (CPI) and trans-polyisoprene (TPI) prepared by a solution casting method. Characterization of these blends has been done using wide angle X-ray scattering. Thermo-mechanical, mechanical, and thermal transport properties have been determined employing dynamic mechanical analyzer (DMA) and transient plane source. Storage modulus and tan δ as determined from DMA have been found to increase and decrease with the increase in TPI content, respectively. Mechanical properties such as Young’s modulus and tensile strength, as determined from strain–stress behavior of CPI/TPI blends, have been found to increase with increasing TPI content. This increase in properties has been explained on the basis of the crosslink density, calculated using theory of rubber elasticity. Thermal transport properties such as thermal conductivity, thermal diffusivity, and volumetric heat capacity are higher for all the three blends as compared to their pure components.     

Parameters for optimization of coke quality (<Emphasis Type="Italic">CRI</Emphasis> and <Emphasis Type="Italic">CSR</Emphasis>)

Experimental data illustrate the diversity of ash composition in Russian coal, even within a single rank. Examples show that the ash basicity may be used for effective optimization of the coking-batch composition by basin, rank, and components, in improving the CRI and CSR values of coke.     

Immobilization horseradish peroxidase on amine-functionalized glycidyl methacrylate-<Emphasis Type="Italic">g</Emphasis>-poly(ethylene terephthalate) fibers for use in azo dye decolorization

Activated fibers were used as a new support material for the immobilization of horseradish peroxidase (HRP). Poly(ethylene terephthalate) (PET) fibers were grafted with glycidyl methacrylate (GMA) using benzoyl peroxide (Bz₂O₂) as initiator. 1,6-diaminohexane (HMDA) was then covalently attached to this GMA grafted PET fibers. HMDA-GMA-g-PET fibers were activated with glutaraldehyde and HRP was successfully immobilized. Both on the free HRP and the immobilized HRP activities, pH, temperature, thermal stability, and reusability were investigated. Both free enzyme and immobilized enzyme were used in a batch process for the degradation of azo dye. About 98% of azo dye removal was observed with immobilized HRP, while 79% of azo dye removal was found with the free HRP. 45 min of the contact time is sufficient for the maximum azo dye removal. The HRP immobilized on modified PET fibers were very effective for removal of azo dye from aqueous solutions.     

Effects of modified vermiculite on the synthesis and swelling behaviors of hydroxyethyl cellulose-<Emphasis Type="Italic">g</Emphasis>-poly(acrylic acid)/vermiculite superabsorbent nanocomposites

A series of hydroxyethyl cellulose-g-poly(acrylic acid)/vermiculite (HEC-g-PAA/VMT) superabsorbent nanocomposites were prepared by radical solution polymerization among hydroxyethyl cellulose (HEC), partially neutralized acrylic acid (AA), raw vermiculite (RVMT), acidified vermiculite (AVMT) and organo-vermiculite (OVMT) in the presence of initiator ammonium persulfate (APS) and crosslinker N,N’-methylenebisacrylamide (MBA). FTIR results revealed that AA was grafted onto HEC backbone and VMT participated in polymerization. VMT was exfoliated during polymerization reaction and a nanocomposite structure was formed as shown by XRD and TEM analysis. Effects of VMT content, concentration of HCl solution and organification degree of OVMT on water absorbency were investigated and the swelling kinetics of the developed nanocomposites was also evaluated. Results showed that incorporation of VMT greatly enhanced the water absorbency, and the modified VMT by acidification and organification can improve the water absorbency more remarkably than raw one. OVMT can improve the swelling capabilities and swelling rate to the highest degree in contrast to RVMT and AVMT.     

Oxidation kinetics for <Emphasis Type="Italic">cis</Emphasis>-9,<Emphasis Type="Italic">trans</Emphasis>-11 and <Emphasis Type="Italic">trans</Emphasis>-10,<Emphasis Type="Italic">cis</Emphasis>-12 isomers of CLA

The autoxidation processes of the cis-9,trans-11 (c9,t11) and trans-10,cis-12 (t10,c12) isomers of CLA were separately observed at ca. 0% RH and different temperatures. The t10,c12 CLA oxidized faster than the c9,t11 isomer at all tested temperatures. The first half of the oxidation process of t10,c12 CLA obeyed an autocatalytic-type rate expression, but the latter half followed first-order kinetics. On the other hand, the entire oxidation process of c9,t11 CLA could be expressed by the autocatalytic-type rate expression. The apparent activation energies and frequency factors for the autoxidation of the isomers were estimated from the rate constants obtained at various temperatures based on the Arrhenius equation. The apparent activation energies for the CLA isomers were greater than those for the nonconjugated n−6 and n−3 PUFA or their esters. However, the enthalpyentropy compensation held during the autoxidation of both the CLA and PUFA. This suggested that the autoxidation mechanisms for the CLA and PUFA were essentially the same.     

Biosynthesis of (3<Emphasis Type="Italic">Z</Emphasis>,6<Emphasis Type="Italic">Z</Emphasis>,9<Emphasis Type="Italic">Z</Emphasis>)-3,6,9-Octadecatriene: The Main Component of the Pheromone Blend of <Emphasis Type="Italic">Erannis bajaria</Emphasis>

The hydrocarbons (3Z,6Z,9Z)-3,6,9-octadecatriene (3Z,6Z,9Z-18:H) and (3Z,6Z,9Z)-3,6,9-nonadecatriene (3Z,6Z,9Z-19:H) constitute the pheromone of the winter moth, Erannis bajaria. These compounds belong to a large group of lepidopteran pheromones which consist of unsaturated hydrocarbons and their corresponding oxygenated derivatives. The biosynthesis of such hydrocarbons with an odd number of carbons in the chain is well understood. In contrast, knowledge about the biosynthesis of even numbered derivatives is lacking. We investigated the biosynthesis of 3Z,6Z,9Z-18:H by applying deuterium-labeled precursors to females of E. bajaria followed by gas chromatography–mass spectrometry analysis of extracts of the pheromone gland. A mixture of deuterium-labeled [17,17,18,18-²H₄]-3Z,6Z,9Z-18:H and the unlabeled 3Z,6Z,9Z-18:H was obtained after topical application and injection of (10Z,13Z,16Z)-[2,2,3,3-²H₄]-10,13,16-nonadecatrienoic acid ([2,2,3,3-²H₄]-10Z,13Z,16Z-19:acid) or (11Z,14Z,17Z)-[3,3,4,4-²H₄]-11,14,17-icosatrienoic acid ([3,3,4,4-²H₄]-11Z,14Z,17Z-20:acid). These results are consistent with a biosynthetic pathway that starts with α-linolenic acid (9Z,12Z,15Z-18:acid). Chain elongation leads to 11Z,14Z,17Z-20:acid, which is shortened by α-oxidation as the key step to yield 10Z,13Z,16Z-19:acid. This acid can be finally reduced to an aldehyde and decarbonylated or decarboxylated to furnish the pheromone component 3Z,6Z,9Z-18:H. A similar transformation of 11Z,14Z,17Z-20:acid yields the second pheromone component, 3Z,6Z,9Z-19:H.