Preparation of pH-sensitive amphiphilic block star polymers,their self-assembling characteristics and release behavior on encapsulated molecules

Poly(ethylene glycol) (PEG), a polymer with excellent biocompatibility, was widely used to form nanoparticles for drug delivery applications. In this paper, based on PEG, a series of pH-sensitive amphiphilic block star polymers of poly(ethylene glycol)-block-poly(ethoxy ethyl glycidyl ether) (PEG-b-PEEGE) with different hydrophobic length were synthesized by living anionic ring-opening polymerization method. The products were characterized using ¹H NMR and gel permeation chromatography. These copolymers could self-assemble in aqueous solution to form micellar structure with controlled morphologies. Transmission electron microscopy showed that the nanoparticles are spherical or rodlike with different hydrophilic mass fractions. The pH response of polymeric aggregates from PEG-b-PEEGE was detected by fluorescence probe technique at different pH. A pH-dependent release behavior was observed and pH-responsiveness of PEG-b-PEEGE was affected by the hydrophobic block length. These results demonstrated that star-shaped polymers (PEG-b-PEEGE) are attractive candidates as anticancer drug delivery carriers.     

Micellization and sol-gel transition of novel thermo- and pH-responsive ABC triblock copolymer synthesized by RAFT

A well-defined thermo- and pH-responsive ABC-type triblock copolymer monomethoxy poly(ethylene glycol)-b-poly(2-(2-methoxyethoxy) ethyl methacrylate-co-N-hydroxymethyl acrylamide)-b-poly(2-(diethylamino) ethyl methacrylate), mPEG-b-P(MEO₂MA-co-HMAM)-b-PDEAEMA, was synthesized by reversible addition-fragmentation chain transfer polymerization (RAFT). The ABC-type triblock copolymer was endowed thermo- and pH-responsive, corresponding to the thermosensitive properties of P(MEO₂MA-co-HMAM) and pH-responsive properties PDEAEMA segments, respectively. The thermo- and pH-responsive properties of copolymer aqueous solutions were studied by UV transmittance measurements, dynamic light scattering (DLS), transmission electron microscopy (TEM). The results showed that the N-hydroxymethyl acrylamide (HMAM) content in triblock copolymer affected the lower critical solution temperature (LCST) of the triblock copolymer aqueous solution. The copolymer self-assembled into core-shell micelles, with the thermoresponsive P(MEO₂MA-co-HMAM) block and the hydrophilic PEG block as the shell, the hydrophobic PDEAEMA block as the core, in alkaline solution at room temperature. While in acidic media, when the temperature above the lower critical solution temperature (LCST) of the triblock copolymer aqueous solution, the copolymer self-assembled into P(MEO₂MA-co-HMAM)-core micelles with mixed hydrophilic PEG and pH-responsive PDEAEMA coronas. Sol-gel transition temperature (T_sol-gel) for the triblock copolymer determined by vial inversion test further indicated that it is dependent on the concentration of the triblock copolymers and solution pH. Copolymer hydrogel loaded with bovine serum albumin (BSA) were used for the sustained release study. The results indicated that the hydrogel was a promising candidate for controlling protein drug delivery.     

Development of nano-channel single crystals and verification of their structures by small angle X-ray scattering

Nano-channel single crystals were developed via consecutive growth of various polymer single-crystal channels comprising homo and block copolymers by self-seeding method. Poly(ethylene glycol)-b-polystyrene (PEG-b-PS) and poly(ethylene glycol)-b-poly(methyl methacrylate) (PEG-b-PMMA) block copolymers were synthesized by atom transfer radical polymerization. Self-seeding temperature, concentration, and crystallization time affected the width of the channels. This might provide a new way to investigate directional absorption, diffusion, and immobilization of biomacromolecules on the surface. The crystalline blocks of PEG-b-PS and PEG-b-PMMA diblock copolymers were similar, therefore, the continuity of channel-wire growth was guaranteed. Development of complete square channels next to the channels covered with high molecular weight brushes was infeasible. It was ascribed to a higher hindrance of primarily existing tethered chains on the single-crystal channel. Finally, the consecutive channel-wire single crystals were compared with single-step-grown pyramidal and conic structures. These multilayer crystals grew spirally and formed non-flat channels. The structure and morphology of different crystalline channels were detected by atomic force microscopy (AFM) and small angle X-ray scattering (SAXS). In this work, for the first time, the SAXS data of channel-wire single crystals were reported and they were compared by non-flat channel-like crystals. A profound investigation of PEG-b-PS, PEG-b-PMMA copolymers and PEG homopolymer channel-wire single crystals by SAXS and their comparison with AFM data was a novel work in the field of single-crystal engineering.     

Synthesis and Characterization of pH-Responsive Organic–Inorganic Hybrid Material with Excellent Catalytic Activity

Poly(N-isopropylmethacrylamide-co-methacrylic acid) [p(NipAam-Mac)] microgels were synthesized and used as microreactors to fabricate silver nanoparticles. Pure and hybrid microgels were characterized using Ultraviolet–Visible (UV/Vis) spectroscopy, Fourier transform infra-red (FTIR) spectroscopy and transmission electron microscopy (TEM). Catalytic activity of hybrid microgels and mechanism of catalysis by this system was explored using different reaction conditions. At the same temperature, apparent rate constant (k_app) was found to be varied from 0.0414 to 0.7852 min^?1 by increasing the concentration of NaBH₄ from 2.49 to 22.41 mM at constant concentration of substrate and catalyst. However upon extra increase in concentration of NaBH₄ from 22.41 to 37.35 mM reduced the value of k_app to 0.2178 min^?1. Likewise, the value of k_app was found to be increased from 0.1242 to 0.5495 min^?1 with increasing the concentration of 4-nitrophenol [Para-nitrophenol (p-Np)] from 0.063 to 0.079 mM keeping other parameters constant. Further increase in concentration of p-Np caused decline in the value of k_app. Kinetic data reveals that catalytic reduction of p-Np obeys Langmuir–Hinshelwood mechanism and p-Np is converted to p-Ap on the surface of the silver nanoparticles passing through various reaction intermediates.     

Effect of different structured POSS/GMA-containing copolymers on the morphology of porous coating by breath-figures method

Polyhedral oligomeric silsesquioxane (POSS) and glycidyl methacrylate (GMA) are used to synthesize linear L-(PGMA-b-MA-POSS), dicephalous D-(PGMA-b-MA-POSS)₂, and four-armed T-(PGMA-b-MA-POSS)₄ through atom transfer radical polymerization (ATRP). These different structured POSS/GMA-containing copolymers are applied to build the porous films through breath-figures (BF) method. L-(PGMA-b-MA-POSS) is easy to form the ordered porous BF film, and T-(PGMA-b-MA-POSS)₄ tends to form well-distributed BF film due to its high segment density which is beneficial to stabilize water drop. It is proven that solvent has a great effect on the morphologies of BF film. The perfect BF film is developed in the relatively wet atmosphere as 5–8 μm diameter of pores casted in THF and 2–4 μm diameter of pores casted in CH₂Cl₂ with regular morphology. The developed BF film has superior stability than the film developed in natural conditions due to the shorter stable balancing time. Therefore, it is believed that the obtained porous films show great potential in coating application.     

Synthesis of poly(<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide-<Emphasis Type="Italic">b</Emphasis>-<Emphasis Type="Italic">N</Emphasis>-vinylcarbazole) copolymers via RAFT polymerization and its stimuli responsive morphology in aqueous media

Here, we report the successful synthesis of series of stimuli responsive amphiphilic diblock copolymers (SRABCs) poly(N-isopropylacrylamide-b-N-vinylcarbazole) [poly(NIPAAm-b-NVK)] through reversible addition fragmentation chain transfer (RAFT) polymerization. Copolymers with fixed hydrophilic [poly(NIPAAm)] block length and variable (with three different) hydrophobic [poly(NVK)] block lengths were synthesized and the block length ratio was confirmed from their molecular weight data. The self-assembly nature of synthesized block copolymers was confirmed by determining critical micelle concentration (CMC). Self-assembled block copolymers showed rice-grain like morphology for copolymers having equivalent hydrophobic/hydrophilic chain length but in case of block copolymers having smaller and bigger hydrophobic chain length with respect to hydrophilic chain length displayed vesicular morphology. The thermo and pH responsiveness of the block copolymers was found to be influenced by variation in length and chemical composition of the blocks. Due to their thermo and pH responsiveness resulted self-assembled structures underwent morphology transitions from vesicular and rice grain like to micellar structure in aqueous medium. The probable applications of the studied stimuli responsive amphiphilic diblock copolymers can be found in the nanotechnology and biotechnology are indicated.

Open image in new window

Graphical abstract Synthesis, self-assembly and stimuli responsiveness of poly(NIPAAm-b-NVK) copolymers.

     

Dual stimuli-responsive supramolecular polymeric nanoparticles based on poly(<Emphasis Type="Italic">α</Emphasis>-cyclodextrin) and acetal-modified <Emphasis Type="Italic">β</Emphasis>-cyclodextrin-azobenzene

To aim at pH environment in tumor tissue and light-controlled drug release, UV and pH dual-responsive supramolecular polymeric nanoparticles mediated by host-guest interactions of poly(α-cyclodextrin) and acetal-modified β-cyclodextrin-azobenzene were developed in this work. The host molecule was poly(α-cyclodextrin) and the guest molecule was composed of acetal-modified β-cyclodextrin with one azobenzene linked. The inclusion of α-cyclodextrin and azobenzene leaded to amphiphilic supramolecular polymer, which further self-assembled to form supramolecular polymeric nanoparticles in aqueous medium. UV and pH responsiveness of supramolecular polymeric nanoparticles attributed to azobenzene and acetal, respectively. Supramolecular polymeric nanoparticles based on poly(α-cyclodextrin) and acetal-modified β-cyclodextrin-azobenzene with the average diameter of sub-100 nm were controllable to release the drugs regulated by pH and UV.     

Synthesis and properties of amphiphilic thermo-sensitive block copolymers

Octadecyl acrylate (ODA) as hydrophobic monomer and N-isopropylacryamide (NIPAAm) as hydrophilic monomer were chosen to synthetize the thermo-sensitive block copolymers PODA_x-PNIPAAm_y-PODA_x (BAB-type) via reversible-addition-fragmentation chain transfer (RAFT) polymerization, the block copolymers could self-assemble to flower-like micelles in aqueous solution with hydrophobic PODA as the inner core and stabilized by hydrophilic PNIPAAm as the outer shell. The characterizations of the micelles such as surfactivity, thermo-sensitivity, micelle hydrodynamic radius (R _h ) and polydispersity index (PdI) were demonstrated by surface tension technique, UV-Vis, and dynamic light scattering (DLS) measurements, respectively. The longer the hydrophilic chain was, the higher the critical micellization concentration (CMC) would be, and the higher content of the PODA was, the lower the lower critical solution temperature (LCST) would be. The average R _h remained at about 100 nm below LCST, but decreased sharply to about 42 nm and kept constant when reaching and above LCST, which meant the non-aggregation of BAB type block copolymers. The micelle was homogeneous with the small PdI within the range of research. B_0.5mA_24mB_0.5m had the largest capacity to encapsulate lipophilic Sudan Red IV model drugs and the drug loading efficiency was 9.76%.     

Synthesis and characterization of thermo-responsive supramolecular diblock copolymers

In this paper, we report the synthesis and characterization of a new thermo-responsive supramolecular amphiphiles diblock copolymer, methoxy poly (ethylene glycol)-block-Poly(N-isopropylacrylamide) (mPEG-b-PNIPAM). The mPEG with β-cyclodextrin (β-CD) group and the PNIPAM with adamantine (AD) group were synthesized, respectively, and mPEG-b-PNIPAM was then obtained by the host-guest inclusion between AD and β-CD. The structure and molecular weight of mPEG-b-PNIPAM was confirmed by ¹H NMR and GPC measurements. At low temperature (T?<?33 °C), the PNIPAM block is hydrophilic. With increasing temperature, the hydrophobicity the of PNIPAM block increases. This molecular feature leads to interesting aggregation behavior of micelles in aqueous solutions at different temperatures. The self-assembly was revealed by UV, DLS measurements, and TEM observations.     

Synthesis of all-acrylic graft copolymers by grafting-through strategy in emulsion

In this paper, PnBA-g-PMMA brush-like and centipede multigraft copolymers were synthesized via DPE seeded emulsion polymerization and miniemulsion polymerization. PMMA macromonomers with single tail and double tails were prepared by DPE-technique in emulsion and Steglich esterification. Then PnBA-g-PMMA multigraft copolymers were obtained by miniemulsion copolymerization. The molecular weight and polydispersity indices of PMMA macromonomers and graft copolymers were characterized by GPC. The structural characteristics, weight content of PMMA and the number of grafting sites in brush-like and centipede multigraft copolymers were determined by ¹H NMR. The thermal performance of graft copolymers were analyzed by DSC and TGA. AFM confirmed microphase separation between PnBA block and PMMA block.     

Conformational analyses for alanine oligomer during hydration by quantum chemical calculation (QCC)

The structure and association energy of hydrated l-alanine pentamers at the hydration rate (h) of 0–1 were calculated by quantum chemical calculation (QCC) using the density functional theory [B3LYP/6-31G(d, p)] method for three kinds of stable conformers (β-extended: t?/t+, PP_II-like: g?/g+, α-helix: g?/g?) converged by convergent calculations from l-alanine pentamers in gas phase. Water molecules are mainly inserted between intramolecular hydrogen bond of CO–HN in PP_II-like and α-helix conformers and attached to the CO group in β-extended conformer. α-Helix conformer turns to PP_II-like conformer at higher hydration rate. The association energy decreased with the increase of the hydration rate, indicating that the conformers were stabilized by the hydration. It was found that PP_II-like conformer, which was the most stable in the anhydrate state, was also the most stable in the hydrate state. This structure corresponds to a middle structure of PP_II (g?/t+) and β-extended (t?/t+) structures. These results obtained by energy calculation using QCC support the experimental results by Eker et al. and Graf et al., who reported that alanine oligomer exhibited a mixture of PP_II and β-extended structure in aqueous solution.     

Bioengineering functional copolymers: synthesis and characterization of poly(<Emphasis Type="Italic">N</Emphasis>-isopropyl acrylamide-<Emphasis Type="Italic">co</Emphasis>-3,4-2H-dihydropyran)s

Novel bioengineering copolymers were synthesized by radical copolymerization of N-isopropylacrylamide (NIPA) and 3,4-2H-dihydropyran (DHP) with 2,2′-azobisisobutyronitrile as an initiator in acetone solution at 70 °C under nitrogen atmosphere. Structure, tacticity and compositons of the copolymers prepared in a wide range of monomer feed were confirmed by FTIR, ¹H{¹³C} NMR-DEPT and elemental analyses. The monomer reactivity ratios (r ₁ and r ₂) were detected using known two methods: r ₁ (NIPA)?=?1.25 and r ₂?=?0.035 (DHP), and r ₁ (NIPA) ?=?0.97 and r ₂?=?0.022 (DHP) by Kelen-Tüdös and Jaacks methods, respectively. It was demonstrated that the studied monomer pair has a tendency to form H-bonding beween amide/ether groups through ?NH...O< complexation which played an important role in the stereoselective chain growth, and significant decrease of allyl degradative chain transfer reactions. This phenomenon is also confirmed by the observed relatively high molecular weights of copolymers (M _v ). The synthesized water-soluble stimuli-responsive poly(NIPA-co-DHP)s exhibit thermal stability, higher glass-transition temperature, polyelectrolyte, pH- and temperature-sensitive behavior and can be attributed to the class of bioengineering functional copolymers useful for various bio- and gene-engineering, and drug delivery applications.     

Novel amphiphilic temperature responsive graft copolymers PCL-<Emphasis Type="Italic">g</Emphasis>-P(MEO<Subscript>2</Subscript>MA-<Emphasis Type="Italic">co</Emphasis>-OEGMA) via a combination of ROP and ATRP: synthesis,characterization, and sol-gel transition

A series of well-defined novel amphiphilic temperature-responsive graft copolymers containing PCL analogues P(αClεCL-co-εCL) as the hydrophobic backbone, and the hydrophilic side-chain PEG analogues P(MEO₂MA-co-OEGMA), designated as P(αClεCL-co-εCL)-g-P(MEO₂MA-co-OEGMA) have been prepared via a combination of ring-opening polymerization (ROP) and atom transfer radical polymerization (ATRP). The composition and structure of these copolymers were characterized by ¹H NMR and GPC analyses. The self-assembly behaviors of these amphiphilic graft copolymers were investigated by UV transmittance, a fluorescence probe method, dynamic light scattering (DLS) and transmission electron microscopy (TEM) analyses. The results showed that the graft copolymers exhibited the good solubility in water, and was given the low critical temperature (LCST) at 35(±1) °C, which closed to human physiological temperature. The critical micelle concentrations (CMC) of P(αClεCL-co-εCL)-g-P(MEO₂MA-co-OEGMA) in aqueous solution were investigated to be 2.0 × 10^?3, 9.1 × 10^?4 and 1.5 × 10^?3 mg·mL^?1, respectively. The copolymer could self-assemble into sphere-like aggregates in aqueous solution with diverse sizes when changing the environmental temperature. The vial inversion test demonstrated that the graft copolymers could trigger the sol-gel transition which also depended on the temperature.     

TiO<Subscript>2</Subscript>–SiO<Subscript>2</Subscript> composite nanoparticles containing hindered amine light stabilizers encapsulated by MMA–PMPM copolymers

TiO₂–SiO₂ composite nanoparticles containing hindered amine light stabilizers (HALSs) were prepared by encapsulation of commercially available TiO₂–SiO₂ nanoparticles using methyl methacrylate (MMA) and 1,2,2,6,6-pentamethyl-4-piperidyl methacrylate (PMPM) copolymers through mini-emulsion polymerization. The Fourier transform infrared spectral analysis (FTIR) showed that the hindered amine light stabilizer PMPM was incorporated into the TiO₂–SiO₂/P(MMA-co-PMPM) composite nanoparticles. The X-ray photoelectron spectroscopy analysis (XPS) showed that the surface of TiO₂–SiO₂ nanoparticles was enriched with HALS moieties. The formation of P(MMA-co-PMPM) random copolymers on the surface of TiO₂–SiO₂ nanoparticles was determined by differential scanning calorimetry (DSC), and the percentage of the chemically grafted P(MMA-co-PMPM) coverage on the TiO₂–SiO₂ nanoparticles surface was 40.9 wt% determined by thermogravimetric analysis (TGA), which revealed that the TiO₂–SiO₂ nanoparticles were successfully encapsulated by MMA–PMPM copolymers. Scanning electron microscopy analysis indicated that the TiO₂–SiO₂/P(MMA-co-PMPM) composite nanoparticles were mainly homogeneous spherical shape particles, with an average size of about 90 nm. Rhodamine B (Rh.B) photocatalytic degradation study revealed UV-shielding characteristics for TiO₂–SiO₂/P(MMA-co-PMPM) composite nanoparticles and showed a remarkable decrease in photocatalytic activity of TiO₂–SiO₂ nanoparticles. These results indicated that TiO₂–SiO₂/P(MMA-co-PMPM) composite nanoparticles may be promising light stabilizers with covalent functionalization of polymeric HALS, which has little photocatalytic activity, and can be introduced into the weathering-resistant polymer materials to improve their application properties.     

Crystal structure and thermal expansion of ammonium pentaborate NH<Subscript>4</Subscript>B<Subscript>5</Subscript>O<Subscript>8</Subscript>

Anhydrous ammonium pentaborate NH₄B₅O₈ has been synthesized by thermal dehydration of larderellite NH₄[B₅O₇(OH)₂] · H₂O at a temperature of 290°C for 7 h. The crystal structure has been determined from the X-ray powder diffraction data: a = 7.58667(5) Å, b = 12.00354(8) Å, c = 14.71199(8) Å, R _p = 6.23, R _wp = 7.98, R _B = 12.7, R _F = 8.95, and β-KB₅O₈ structure type. The double interpenetrating framework is formed by pentaborate groups, each consisting of a boron-oxygen tetrahedron and four triangles, in which all oxygen atoms are bridging. The thermal behavior of the NH₄B₅O₈ compound has been investigated using thermal X-ray diffraction. As for other pentaborates of this type, the thermal expansion of the NH₄B₅O₈ compound is anisotropic and reaches a maximum along the a axis. The thermal expansion coefficients are as follows: α _a = 39 × 10^?6, α _b = 6 × 10^?6, α _c = 20 × 10^?6, and α _V = 65 × 10^?6 °C^?1.     

Assessing the technological value of coal in coking

Coking coal of the same rank from different countries and fields may be distinguished in terms of use value by rating on the basis of seven technological and petrographic characteristics that determine the coke yield and properties: the ash content A^d; the total sulfur content S_t^d; the yield of volatiles V^daf; the plastic-layer thickness y; the vitrinite reflection coefficient R_o; the content of vitrinite-group macerals Vt; and the basicity index B_b. A range of values and a rating (on a scale from 1 to 10) are established for each of these parameters. Each rating corresponds to a particular score (from 0.1 to 1.0). Ranges of A^d, S_t^d, Vt, and B_b are established for the whole metamorphic series, while ranges of V^daf, y, and R_o are established for individual ranks and groups of ranks. Altogether, 105 coking coals from Ukraine, Russia, the United States, Australia, and Canada that are used at Ukrainian coke plants are investigated. The range of rating scores and their mean values are determined for individual coal ranks and groups. As an example, three bituminous coals from Ukraine, the United States, and Australia are compared by the proposed method. This method permits objective assessment of the technological value of coal within a single rank and the selection of the best purchase option.     

Impedance sensor for the early failure diagnosis of organic coatings

A miniature impedance sensor used for field diagnosis of the early failure of coatings has been developed based on microelectronics and electrochemical impedance spectroscopy (EIS). The aging process of polyurethane-based coatings in salt spray test chamber was studied using the impedance sensor. Several critical indexes related to EIS such as phase angle (θ_10Hz, θ_15kHz), breakpoint frequency (f_b), specific capacitance (C_10Hz, C_15kHz), and impedance modulus (Z_0.1Hz) were proposed to evaluate the severity of coating degradation. The results indicated that the impedance sensor could accurately monitor the degradation process of coatings, and once Z_0.1Hz?<?10⁶ Ω cm², f_b?>?100 Hz, or θ_10Hz?<?20°, the coating may be regarded as completely degraded and fails to protect the metal substrate.     

Head-to-tail cyclization of a heptapeptide eliminates its cytotoxicity and significantly increases its inhibition effect on amyloid <Emphasis Type="Italic">β</Emphasis>-protein fibrillation and cytotoxicity

Amyloid-β (Aβ) protein aggregation is the main hallmark of Alzheimer’s disease (AD). Inhibition of Aβ fibrillation is thus a promising therapeutic approach to the prevention and treatment of AD. Recently, we designed a heptapeptide inhibitor, LVFFARK (LK7). LK7 shows a promising inhibitory capability on Aβ fibrillation, but is prone to self-assembling and displays high cytotoxicity, which would hinder its practical application. Herein, we modified LK7 by a head-to-tail cyclization and obtained a cyclic LK7 (cLK7). cLK7 exhibits a different self-assembly behavior from LK7, and has higher stability against proteolysis than LK7 and little cytotoxicity to SHSY5Y cells. Thermodynamic analysis revealed that both LK7 and cLK7 could bind to Aβ₄₀ by electrostatic interactions, hydrogen bonding and hydrophobic interactions, but the binding affinity of cLK7 for Aβ₄₀ (K_D = 4.96 μmol/L) is six times higher than that of LK7 (K_D = 32.2 μmol/L). The strong binding enables cLK7 to stabilize the secondary structure of Aβ₄₀ and potently inhibit its nucleation, fibrillation and cytotoxicity at extensive concentration range, whereas LK7 could only moderately inhibit Aβ40 fibrillation and cytotoxicity at low concentrations. The findings indicate that the peptide cyclization is a promising approach to enhance the performance of peptide-based amyloid inhibitors.

Open image in new window

     

Ultralow ppm <Emphasis Type="Italic">se</Emphasis>ATRP synthesis of PEO-<Emphasis Type="Italic">b</Emphasis>-PBA copolymers

Poly(ethylene oxide)-block-poly(butyl acrylate) copolymers were prepared via simplified electrochemically mediated atom transfer radical polymerization (seATRP) utilizing only 1 ppm of Cu^II complex, which is the limit of a successful well-controlled polymerization. The presented seATRP system works under potentiostatic and galvanostatic conditions. The polymerization results showed similar molecular weight evolution while maintaining a narrow molecular weight distribution throughout the reactions. ¹H NMR results confirm chemical structure of synthesized diblock copolymers. This ultralow ppm technique is promising candidate for polymerization from nanoparticles, flat surfaces, proteins, and DNA.