Synthesis and characterization of PET fibers grafted with binary mixture of 2-methylpropenoic acid and acrylonitrile by free radical: its application in removal of cationic dye

Grafting of binary vinyl monomer mixtures such as 2-methylpropenoic acid (MPA) and acrylonitrile (AN) onto poly (ethylene terephthalate) fibers (PET) was achieved in an aqueous medium with using benzoyl peroxide like free radical initiator. A new reactively fibrous adsorbent was used for removal of dye such as methylene blue (MB) from aqueous media through batch sorption method. Fibers adsorbent was swelled in solution to support the graft and the subsequent polymerization of MPA/AN onto polyester fibers. Optimum conditions for grafting were discovered and reactive fiber were characterized. Variations of graft yield with time, temperature, initiator concentration and monomer mixture ratio were investigated. The optimum initiator concentration was found to be 8 × 10^?3 mol/L. The percentage of grafting rose steadily with the vinyl monomer mixture monomer concentration (50 %). The optimum temperature and polymerization time were found to be 80 °C and 120 min, respectively. The use of AN and MPA monomers together in grafting produce a significant increased in the graft yield. Experimental studies showed that the percentage removal of MB was a great higher on the MPA/AN grafted PET (MPA/AN-g-PET) fibers than on the original PET fibers. The adsorbed quantity of MB improved with pH and basic pH was appropriate for the elimination of MB. MPA/AN-g-PET fibers removed 98 % of cationic dye when initial concentration diverse from 10 to 80 mg L^?1 at pH 9.0. Almost all of the adsorbed cationic dye was eluted by ethanoic acid in methanol. Ten removal–desorption cycles indicated that the reactive fibers were favorable for repetitive use without notable change in removal capacity. Consequently, the MPA/AN-g-PET fibers have demonstrated potential as an effective adsorbent for the extremely effective removal of cationic dyes from aqueous media.     

Development of natural and synthetic polymer-based semi-interpenetrating polymer network for controlled drug delivery: optimization and in vitro evaluation studies

This research paper describes the development, optimization and in vitro characterization of chemically cross-linked pectin–polyvinyl alcohol-co-poly(2-Acrylamido-2-methylpropane sulfonic acid) semi-interpenetrating polymer network hydrogel [pectin–PVA-co-poly(AMPS) semi-IPN hydrogel] for controlled delivery of model drug tramadol HCl. Response surface methodology based on 3² factorial design was used for optimization and investigating the effect of independent factors: polymer-blend ratio (pectin:PVA = X ₁) and monomer (AMPS = X ₂) concentration on the dependent variables, swelling ratio (q _18th), percent drug release (R _18th, %), time required for 80 % drug release (t _{80 %}, h), drug encapsulation efficiency (DEE, %) and drug loaded contents (DLC, mg/g) in pectin-PVA-co-poly(AMPS) gels prepared by free radical polymerization. The optimized semi-IPN gel (FPP-10) showed controlled in vitro drug release (R _18th) of 56.34 % in 18 h, t _{80 %} of 30 h, and DEE of 23.40 %. These semi-IPN hydrogels were also characterized through SEM, FTIR, sol–gel analysis, swelling studies and drug release characteristics. Therefore, this newly synthesized polymeric network could be a potential polymeric system for controlled drug delivery of tramadol HCl for prolonged drug release.     

Bioengineering functional copolymers: synthesis and characterization of poly(<Emphasis Type="Italic">N</Emphasis>-isopropyl acrylamide-<Emphasis Type="Italic">co</Emphasis>-3,4-2H-dihydropyran)s

Novel bioengineering copolymers were synthesized by radical copolymerization of N-isopropylacrylamide (NIPA) and 3,4-2H-dihydropyran (DHP) with 2,2′-azobisisobutyronitrile as an initiator in acetone solution at 70 °C under nitrogen atmosphere. Structure, tacticity and compositons of the copolymers prepared in a wide range of monomer feed were confirmed by FTIR, ¹H{¹³C} NMR-DEPT and elemental analyses. The monomer reactivity ratios (r ₁ and r ₂) were detected using known two methods: r ₁ (NIPA)?=?1.25 and r ₂?=?0.035 (DHP), and r ₁ (NIPA) ?=?0.97 and r ₂?=?0.022 (DHP) by Kelen-Tüdös and Jaacks methods, respectively. It was demonstrated that the studied monomer pair has a tendency to form H-bonding beween amide/ether groups through ?NH...O< complexation which played an important role in the stereoselective chain growth, and significant decrease of allyl degradative chain transfer reactions. This phenomenon is also confirmed by the observed relatively high molecular weights of copolymers (M _v ). The synthesized water-soluble stimuli-responsive poly(NIPA-co-DHP)s exhibit thermal stability, higher glass-transition temperature, polyelectrolyte, pH- and temperature-sensitive behavior and can be attributed to the class of bioengineering functional copolymers useful for various bio- and gene-engineering, and drug delivery applications.     

Complex-radical copolymerization of <Emphasis Type="Italic">N-</Emphasis>vinyl pyrrolidone with isostructural analogs of maleic anhydride

Radical copolymerizations of N-vinyl-2-pyrrolidone (VP) with isostructural analogs of maleic anhydride (MA), such as citraconic anhydride (CA) and N-substituted maleimides [maleimide (MI), N-ethylmaleimide (EMI) and N-phenylmaleimide (PhMI)] were studied. Compositions of copolymers synthesized in a wide range of monomer feed ratios were determined by alkali titration (for anhydride copolymers), FTIR and ¹H NMR spectroscopy using 1495 and 630 cm^-1 (for VP-MI), 1289 and 1225 cm^-1 (for VP-EMI) and 1050 and 3067 cm^-1 (for VP-PhMI) analytical bands and integral areas of CH₂ (pyrrolidone ring) and CH (MI), CH₃ (EMI) and CH= (benzene ring in PhMI) groups, respectively. Electron-donor VP monomer was found to have substantially different reactivities in the radical copolymerization with MA, CA and N-substituted (H, C₂H₅ and phenyl) malemides as electron-acceptor comonomers. Effects of H-bonding and N→O=C coordination on the monomer reactivity ratios were evaluated. Tendency to alternation of the monomer pairs increases in the order of VP–MA > VP–CA > VP-MI > VP-PhMI > VP-EMI. Structure-thermal property-relationship for the synthesized copolymers was also studied.     

Novel amphiphilic temperature responsive graft copolymers PCL-<Emphasis Type="Italic">g</Emphasis>-P(MEO<Subscript>2</Subscript>MA-<Emphasis Type="Italic">co</Emphasis>-OEGMA) via a combination of ROP and ATRP: synthesis,characterization, and sol-gel transition

A series of well-defined novel amphiphilic temperature-responsive graft copolymers containing PCL analogues P(αClεCL-co-εCL) as the hydrophobic backbone, and the hydrophilic side-chain PEG analogues P(MEO₂MA-co-OEGMA), designated as P(αClεCL-co-εCL)-g-P(MEO₂MA-co-OEGMA) have been prepared via a combination of ring-opening polymerization (ROP) and atom transfer radical polymerization (ATRP). The composition and structure of these copolymers were characterized by ¹H NMR and GPC analyses. The self-assembly behaviors of these amphiphilic graft copolymers were investigated by UV transmittance, a fluorescence probe method, dynamic light scattering (DLS) and transmission electron microscopy (TEM) analyses. The results showed that the graft copolymers exhibited the good solubility in water, and was given the low critical temperature (LCST) at 35(±1) °C, which closed to human physiological temperature. The critical micelle concentrations (CMC) of P(αClεCL-co-εCL)-g-P(MEO₂MA-co-OEGMA) in aqueous solution were investigated to be 2.0 × 10^?3, 9.1 × 10^?4 and 1.5 × 10^?3 mg·mL^?1, respectively. The copolymer could self-assemble into sphere-like aggregates in aqueous solution with diverse sizes when changing the environmental temperature. The vial inversion test demonstrated that the graft copolymers could trigger the sol-gel transition which also depended on the temperature.     

Phytofabrication,Characterization and Antibacterial Activity of <Emphasis Type="Italic">Cassia auriculata</Emphasis> Leaf Extract Derived CuO Nanoparticles

A simple, eco-friendly phytosynthesis of copper oxide nanoparticles (CuO NPs) using Cassia auriculata leaf extract was reported. The prepared CuO NPs was characterized by UV–vis spectroscopy which exhibited the surface plasmon resonance (SPR) band at 380–385 nm. TEM and EDX analysis confirmed that CuO NPs were spherical and in size range of 30–35 nm with identified elements Cu and O. X-ray diffraction (XRD) spectrum showed the crystalline nature of the prepared CuO NPs. FTIR spectrum confirmed the presence of Cu–O functional groups. CuO NPs showed significant antibacterial efficacy against all the tested bacterial strains, i.e., Bacillus subtilis, Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa. CuO NPs showed strong antibacterial action against B. subtilis and E. coli than P. aeruginosa and S. aureus. The results of this study revealed that C. auriculata leaf extract was found to be an effective bio-reducing agent for CuO NPs synthesis and also the antibacterial efficacy of phytofabricated CuO may be useful for its applications in medical and textile industries.     

Sonocrystallization of Interesterified Fats with 20 and 30% of Stearic Acid at the sn-2 Position and Their Physical Blends

Physical blends (PB) of high oleic sunflower oil and tristearin with 20 and 30% stearic acid and their interesterified (IE) products where 20 and 30% of the fatty acids are stearic acid at the sn-2 position crystallized without and with application of high intensity ultrasound (HIU). IE samples were crystallized at supercooling temperatures (ΔT) of 12, 9, 6, and 3 °C while PB were crystallized at ΔT = 12 °C. HIU induced crystallization in PB samples, but not in the IE ones. Induction in crystallization with HIU was also observed at ΔT = 6 and 3 °C for IE C18:0 20 and 30% and at ΔT = 9 °C only for the 30% samples. Smaller crystals were obtained in all sonicated samples. Melting profiles showed that HIU induced crystallization of low melting triacylglycerols (TAGs) and promoted co-crystallization of low and high melting TAGs. In general, HIU significantly changed the viscosity, G′, and G″ of the IE 20% samples except at ΔT = 12 °C. While G′ and G″ of IE 30% did not increase significantly, the viscosity increased significantly at ΔT = 9, 6, and 3 °C from 1526 ± 880 to 6818 ± 901 Pa.s at ΔT = 3 °C. The improved physical properties of the sonicated IE can make them good contenders for trans-fatty acids replacers.     

One Pot Synthesis and Properties of Cationic Surfactants: <Emphasis Type="Italic">n</Emphasis>-Alkyl-3-Methylpyridinium Bromide

Three new amphiphilic compounds i.e., n-decyl-3-methylpyridinium bromide (a), n-dodecyl-3-methylpyridinium bromide (b), and n-tetradecyl-3-methylpyridinium bromide (c), have been synthesized by condensation reaction and characterized by NMR (¹H, ¹³C) and FTIR spectroscopic techniques. The micellization behavior of the compounds has been studied in ethanol employing conductometry and UV/visible spectroscopy. The critical micellization concentration (CMC) values for compound a, b and c was found to be 0.31, 0.29 and 0.27 m mol L^?1, respectively. Effect of temperature on the CMC was checked in the range of 298-318 K. The thermodynamic parameters such as ΔG, ΔH and ΔS of the micellization process of these surfactants were computed. The negative values of ΔG and positive values of ΔH indicated the spontaneous and endothermic nature of the micellization process. Antimicrobial activities of these amphiphiles showed significant activity against different bacterial strains.     

Facile preparation and good performance of nano-Ag/metallocene polyethylene antibacterial coatings

Metallocene polyethylene/nano-silver coatings were prepared by a facile air-spray method on polymer films. Different from the prevailing strategy to endow polyethylene with antibacterial performance, we used metallocene polyethylene sol and nano-silver as a precursor to deposit coatings on polymers at a relatively low operating temperature. Antibacterial coatings with excellent mechanical properties, water resistance, and low silver release were achieved. The composite coatings were examined in terms of surface characteristics, mechanical properties, and antibacterial activity against two representative bacterial strains including Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). The composite coatings exhibited favorable microstructure, good mechanical properties, and suitable crystallinity. The antimicrobial tests indicated that the fabricated composite coatings showed promising antibacterial activity against E. coli and S. aureus. Furthermore, Ag ions released by the composite coating after 30 days were under 1.2 ppb. These results indicated a promising prospect of the composite coating for wide antibacterial applications.     

The Crystal and Molecular Structure of Dianhydrogossypol

Dianhydrogossypol (4,4′-dihydroxy-5,5′-diisopropyl-7,7′-dimethyl-bis(3H-naphtho[1,8-bc]furan-3-one)) was made by refluxing gossypol in m-xylene. Proton NMR spectroscopy was used to confirm that complete conversion was achieved over a time period of several hours. Single crystals of the compound were obtained by slow evaporation from dichloromethane. Diffraction studies indicate that this crystal form is tetragonal with a I4₁/a space group and with cell dimensions of a = b = 33.8265(4) Å, c = 9.1497(2) Å, V = 10469.4(3) Å³ at 100 K. The structure was solved by direct methods and was refined to an R1 value of 0.0415 on 6,408 independent reflections. Dianhydrogossypol exists as a pair of enantiomers within this structure. The two fused planar ring systems are oriented at a 117° angle to each other (i.e., close to perpendicular), and the isopropyl groups are oriented with the ternary carbon hydrogen atoms pointed inward toward the center of the molecule. Repeating groups of four molecules (of the same chirality) pack to form a helical structure that is supported by intermolecular hydrogen bonds. Each helix is surrounded by four neighboring helices that are composed of molecules of the opposite chirality. The helices form the walls of empty channels that are 5–6 Å wide. As has been found for some gossypol crystal forms, the open-channel structure of dianhydrogossypol might be useful for scavenging or carrying small molecules. Additional NMR studies confirm that dianhydrogossypol can be converted directly to gossypol lactol ethers in the presence of anhydrous alcohols.     

2-Methoxylated FA Display Unusual Antibacterial Activity Towards Clinical Isolates of Methicillin-Resistant <Emphasis Type="Italic">Staphylococcus aureus</Emphasis> (CIMRSA) and <Emphasis Type="Italic">Escherichia coli</Emphasis>

The naturally occurring (6Z)-(±)-2-methoxy-6-hexadecenoic acid (1) and (6Z)-(±)-2-methoxy-6-octadecenoic acid (2) were synthesized in 7–8 steps with 38 and 13% overall yields, respectively, by using an acetylide coupling approach, which made it possible to obtain a 100% cis-stereochemistry for the double bonds. In a similar fashion, the acetylenic analogs (±)-2-methoxy-6-hexadecynoic acid (3) and (±)-2-methoxy-6-octadecynoic acid (4) were also synthesized in 6–7 steps with 48 and 16% overall yields, respectively. The antibacterial activity of acids 1–4 was determined against clinical isolates of methicillin-resistant Staphylococcus aureus (ClMRSA) and Escherichia coli. Among the series of compounds, acid 4 was the most active bactericide towards CIMRSA displaying IC_50s (half maximal inhibitory concentrations) between 17 and 37 μg/mL, in sharp contrast to the 6-octadecynoic acid, which was not bactericidal at all. On the other hand, acids 1 and 3 were the only acids that displayed antibacterial activity towards E. coli, but 1 stood out as the best candidate with an IC₅₀ of 21 μg/mL. The critical micelle concentrations (CMCs) of acids 1–4 were also determined. The C18 acids 2 and 4 displayed a five-fold lower CMC (15–20 μg/mL) than the C16 analogs 1 and 3 (70–100 μg/mL), indicating that 4 exerts its antibacterial activity in a micellar state. None of the studied acids were inhibitory towards S. aureus DNA gyrase discounting this type of enzyme inhibition as a possible antibacterial mechanism. It was concluded that the combination of α-methoxylation and C-6 unsaturation increases the bactericidal activity of the C16 and C18 FA towards the studied bacterial strains. Acids 1 and 4 stand out as viable candidates to be used against E. coli and CIMRSA, respectively.     

Preparation of high surface area mesoporous nickel oxides and catalytic oxidation of toluene and formaldehyde

Mesoporous nickel oxide (NiO) nanoparticles were synthesized by the thermal decomposition reaction of Ni(NO₃)₂·9H₂O using oxalic acid dihydrate as the mesoporous template reagent. The pore structure of nanocrystals could be controlled by the precursor to oxalic acid dihydrate molar ratio, thermal decomposition temperature and thermal decomposition time. The structural characteristic and textural properties of resultant nickel oxide nanocrytals were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), N₂ adsorption–desorption isotherm and temperature programmed reduction. The results showed that the most excellently mesoporous nickel oxide particles (m-Ni-1-4) with developed wormlike pores were prepared under the conditions of the mixed equimolar precursor and oxalic acid and calcined for 4 h at 400 °C. The specific surface area and pore volume of m-Ni-1-4 are 236 m² g^?1 and 0.42 cm³ g^?1, respectively. Over m-Ni-1-4 at space velocity = 20,000 mL g^?1 h^?1, the conversions of toluene and formaldehyde achieved 90 % at 242 and 160 °C, respectively. It is concluded that the reactant thermal decomposition with oxalic acid assist is a key step to improve the mesoporous quality of the nickel oxide materials, the developed mesoporous architecture, high surface area, low temperature reducibility and coexistence of multiple oxidation state nickel species for the excellent catalytic performance of m-Ni-1-4.     

Synthesis,Characterization and Surface Properties of Amidosulfobetaine Surfactants Bearing Odd-Number Hydrophobic Tail

Three amidosulfobetaine surfactants were synthesized namely: 3-(N-pentadecanamidopropyl-N,N-dimethyl ammonium) propanesulfonate (2a); 3-(N-heptadecanamidopropyl-N,N-dimethyl ammonium) propanesulfonate (2b), and 3-(N-nonadecanamidopropyl-N,N-dimethyl ammonium) propanesulfonate (2c). These surfactants were prepared by direct amidation of commercially available fatty acids with 3-(dimethylamino)-1-propylamine and subsequent reaction with 1,3-propanesultone to obtain quaternary ammonium salts. The synthesized surfactants were characterized by IR, NMR and mass spectrometry. Thermogravimetric analysis (TGA) results showed that the synthesized surfactants have excellent thermal stability with no major thermal degradation below 300 °C. The critical micelle concentration (CMC) values of the surfactants 2a and 2b were found to be 2.2 × 10^?4 and 1.04 × 10^?4 mol/L, and the corresponding surface tension (γ_CMC) values were 33.14 and 34.89 mN m^?1, respectively. The surfactants exhibit excellent surface properties, which are comparable with conventional surfactants. The intrinsic viscosity of surfactant (2b) was studied at various temperatures and concentrations of multi-component brine solution. The plot of natural logarithm of relative viscosity versus surfactant concentration obtained from Higiro et al. model best fit the surfactant behavior. Due to good salt resistance, excellent surface properties and thermal stability, the synthesized surfactant has potential to be used in various oil field applications such as enhanced oil recovery, fracturing, acid diversion, and well stimulation.     

New functional copolymers of <Emphasis Type="Italic">N</Emphasis>-acryloyl-<Emphasis Type="Italic">N</Emphasis>′-methyl piperazine and 2-hydroxyethyl methacrylate: synthesis,determination of reactivity ratios and swelling characteristics of gels

Copolymers of N-acryloyl-N′-methylpiperazine (AcrNMP) and 2-hydroxyethyl methacrylate (HEMA) were synthesized by free radical solution polymerization in dioxane at 70 ± 1 °C, using 2,2′-azobisisobutyronitrile (AIBN) as initiator. The copolymer compositions were analyzed by the methods of FTIR spectroscopy and elemental analysis. Both the method of analysis yielded results that agreed reasonably well. The monomer reactivity ratios of the copolymerization were determined by the linearization methods of Finemann–Ross (FR) and Kelen–Tüdös (KT). The reactivity parameter results derived using FTIR analysis showed that the copolymerization yielded mainly alternating structure with reactivity ratios, r ₁(AcrNMP) = 0.263 ± 0.011 and r ₂(HEMA) = 0.615 ± 0.097 by F–R method and r ₁ = 0.227 ± 0.074 and r ₂ = 0.53 ± 0.15 by KT method. Microstructure data calculated by the method of Igarashi also supports the alternating structure (tendency) of the copolymer. Crosslinked polymer gels of this system exhibited remarkably high swelling of more than 500% in water at ambient temperature.     

Sequential Feeding of Lipid Supplement Enriches Beef Adipose Tissues with 18:3n-3 Biohydrogenation Intermediates

The present study was designed to determine if feeding steers extruded flaxseed and hay (25 and 75%; DM basis) together as a total mixed ration (TMR), or sequentially (non-TMR) would result in different enrichments of polyunsaturated fatty acids (PUFA) and their biohydrogenation intermediates (BHI) in beef adipose tissues [subcutaneous (SC) vs perirenal (PR) fat]. Forty-eight Angus cross steers (325 ± 16 kg) were stratified by weight to six pens, and pens were randomized to either TMR or non-TMR and fed ad libitum for an average of 242 days. The concentrations of α-linolenic acid increased by 18 mol% in both SC and PR in non-TMR steers compared to TMR steers (P < 0.01). trans 18:1 isomers were more concentrated in PR than SC (14.4 vs 9.5 mol%; P < 0.01) and increased by 10 mol% in both fat depots for non-TMR (P < 0.01). Other BHI including non-methylene-interrupted 18:2 (atypical dienes), conjugated linoleic acids and conjugated linolenic acids (CLnA) were affected by diet × tissue interactions (P < 0.01). The CLnA and CLA contents were higher in both fat depots when feeding the non-TMR, but the effect of diet was more pronounced in PR than in SC (P < 0.01). Atypical dienes were highest in PR from non-TMR and lowest in TMR fed steers (4.3 and 3.6 mol%) with SC contents being intermediate. The sequential feeding of lipid supplement can thus profoundly affect the enrichment of PUFA and their BHI in beef fat and their differentially enrichment is also fat depot dependant.     

Novel Ester-linked Anionic Gemini Surfactant: Synthesis,Surface-Active Properties and Antimicrobial Study

A novel anionic gemini surfactant containing an ester bond in the spacer group was synthesized using cardanol as the raw material and characterized by IR, ¹H NMR and ¹³C NMR. The surface properties of the gemini surfactant were investigated and compared with its corresponding single chain surfactant counterpart. It was found that this novel gemini surfactant exhibited a low critical micelle concentration value (1.9 mM) and good efficiency in reducing surface tension of water (33.6 mN/m). The gemini surfactant was found to have antimicrobial activity against Gram-negative (Escherichia coli and Pseudomonas aeruginosa), Gram-positive (Bacillus subtilis and Staphylococcus aureus) bacteria and fungi (Aspergillus niger, Aspergillus flavus, Candida albicans and Rhizopus stolonifer). The gemini as well as the corresponding single chain surfactant showed good antimicrobial activity against all pathogenic microorganisms studied and can be employed as an antimicrobial agent. The synthesized novel anionic gemini surfactant possesses an excellent wettability and low foamability.     

(4<Emphasis Type="Italic">Z</Emphasis>,15<Emphasis Type="Italic">Z</Emphasis>)-Octadecadienoic Acid Inhibits Glycogen Synthase Kinase-3β and Glucose Production in H4IIE Cells

Many uncommon non-methylene-interrupted fatty acids (NMI FA) are present in limpet gonads, but their biological properties remain unknown. To investigate new biological effects of naturally occurring NMI FA in eukaryotic cells, the biological activities of structurally analogous (4Z,15Z)-octadecadienoic acid (1), (9Z,20Z)-tricosadienoic acid (2), and (12Z,23Z)-hexacosadienoic acid (3) were examined by using a yeast-based drug-screening system using the Ca²⁺-sensitive mutant strain, Saccharomyces cerevisiae (zds1Δ erg3Δ pdr1Δ pdr3Δ). Among 1–3, 1 showed restored growth activity at a dose of 80 µg/disc in the mutant yeast strain. This phenotype suggests that 1 suppresses Ca²⁺-signaling of the mutant yeast through inhibition of glycogen synthase kinase-3β (GSK-3β) or calcineurin pathways or both. From this result, the inhibitory activity of 1–3 against GSK-3β was further determined. 1–3 showed potent inhibitory activity against GSK-3β with IC₅₀ values ranging from 8.7 to 21.9 µM. Inhibition of GSK-3β reduces gene expression of the gluconeogenic key enzymes in liver, so we analyzed glucose production in rat hepatoma H4IIE cells to assess GSK-3β inhibitory activity of 1–3. Acid 1 inhibited glucose production at 25 µM in H4IIE cells. Our results would open up new possibilities for an anti-diabetic effect of 1 and might provide important insights into understanding the biological properties of naturally occurring NMI FA.     

A Comprehensive Study on the Synthesis and Micellization of Disymmetric Gemini Imidazolium Surfactants

Two groups of disymmetric Gemini imidazolium surfactants, [C₁₄C₄C _m im]Br₂ (m = 10, 12, 14) and [C _m C₄C _n im]Br₂ (m + n = 24, m = 12, 14, 16, 18) surfactants, were synthesized and their structures were confirmed by ¹H NMR and ESI–MS spectroscopy. Their adsorption at the air/water interface, thermodynamic parameters and aggregation behavior were explored by means of surface tension, electrical conductivity and steady-state fluorescence. A series of surface activity parameters, including cmc, γ _cmc, π _cmc, pC ₂₀, cmc/C ₂₀, Γ _max and A _min, were obtained from surface tension measurements. The results revealed that the overall hydrophobic chain length (N _c) for [C₁₄C₄C _m im]Br₂ and the disymmetry (m/n) for [C _m C₄C _n im]Br₂ had a significant effect on the surface activity. The cmc values decreased with an increase of N _c or m/n. The thermodynamic parameters of micellization (ΔG _m ^θ , ΔH _m ^θ , ΔS _m ^θ ) derived from the electrical conductivity indicated that the micellization process of [C₁₄C₄C _m im]Br₂ and [C _m C₄C _n im]Br₂ was entropy-driven at different temperatures, but the contribution of ΔH _m ^θ to ΔG _m ^θ was enhanced by increasing N _c or m/n. The micropolarity and micellar aggregation number (N _agg) were estimated by steady-state fluorescence measurements. The results showed that the surfactant with higher N _c or m/n can form larger micelles, due to a tighter micellar structure.     

Cyclodextrin-based hyperbranched polyester: synthesis,characterization, and antimicrobial activity

In this study, the synthesis of cyclodextrin-based hyperbranched polyester (CD-based HBPE) was prepared by a simple condensation route via acid chloride approach (Scheme 1). The formation of ester linkages in CD-based HBPE was clearly identified from FTIR and NMR spectroscopy. The resulting structure and the molecular weight of the CD-based HBPE were confirmed with LC–MS analysis. The CD-based HBPE displayed the fluorescence maxima in the 425 nm range with relatively narrow peak widths indicating that they had pure and intense fluorescence. The antimicrobial activity of the CD-based HBPE was evaluated against the Gram-negative organisms like Escherichia coli and Salmonella paratyphi, Gram-positive organisms as Bacillus subtilis and Staphylococcus aureus and fungi such as Aspergillus niger, and Candida albicans. CD-based HBPE showed a great inhibitory effect toward both bacteria and fungi. The microorganism which possess greater antimicrobial activity with standard antibiotics was selected for determining the minimum inhibitory concentration (MIC) value of the CD-based HBPE. Therefore, the MIC value of the CD-based HBPE against B. subtilis was tested and found to be 31.25 μg mL^?1. Hence, it is suggested that CD-based HBPE holds good agreement with the antimicrobial assay.     

Seasonal N<Subscript>2</Subscript>O emissions respond differently to environmental and microbial factors after fertilization in wheat–maize agroecosystem

Biogeochemical processes regulating cropland soil nitrous oxide (N₂O) emissions are complex, and the controlling factors need to be better understood, especially for seasonal variation after fertilization. Seasonal patterns of N₂O emissions and abundances of archaeal ammonia monooxygenase (amoA), bacterial amoA, nitrate reductase (narG), nitrite reductase (nirS/nirK), and nitrous oxide reductase (nosZ) genes in long-term fertilized wheat–maize soils have been studied to understand the roles of microbes in N₂O emissions. The results showed that fertilization greatly stimulated N₂O emission with higher values in pig manure-treated soil (OM, 2.88 kg N ha^?1 year^?1) than in straw-returned (CRNPK, 0.79 kg N ha^?1 year^?1) and mineral fertilizer-treated (NPK, 0.90 kg N ha^?1 year^?1) soils. Most (52.2–88.9%) cumulative N₂O emissions occurred within 3 weeks after fertilization. Meanwhile, N₂O emissions within 3 weeks after fertilization showed a positive correlation with narG gene copy number and a negative correlation with soil NO₃^? contents. The abundances of narG and nosZ genes had larger direct effects (1.06) than ammonium oxidizers (0.42) on N₂O emissions according to partial least squares path modeling. Stepwise multiple regression also showed that log narG was a predictor variable for N₂O emissions. This study suggested that denitrification was the major process responsible for N₂O emissions within 3 weeks after fertilization. During the remaining period of crop growth, insufficient N substrate and low temperature became the primary limiting factors for N₂O emission according to the results of the regression models.