Selective separation and concentration of Pd(II) from Fe(III), Co(II), Ni(II), and Cu(II) ions using thiourea‐formaldehyde resin

Thiourea‐formaldehyde (TUF), a well‐known chelating resin, has been synthesized and it was used in the adsorption, selective separation, and concentration of Pd(II) ions from Fe(III), Co(II) Ni(II), and Cu(II) base metal ions. The composition of the synthesized resin was determined by elemental analysis. The effect of initial acidity/pH and the adsorption capacity for Pd(II) ions were studied by batch technique. The adsorption and separation of Pd(II) were then examined by column technique. FTIR spectra and SEM/EDS analysis were also recorded before and after the adsorption of Pd(II). The optimum pH was found to be 4 for the adsorption. The adsorption data fitted well to the Langmuir isotherm. The maximum adsorption capacity of the TUF resin for Pd(II) ions was found to be 31.85 mg g⁻¹ (0.300 mmol g⁻¹). Chelating mechanism was effective in the adsorption. Pd(II) ions could be separated efficiently from Fe(III), Cu(II), Ni(II), and Co(II) ions using TUF resin. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Selective adsorption behavior of ion-imprinted magnetic chitosan beads for removal of Cu(II) ions from aqueous solution

Heavy metal ion is one of the major environmental pollutants. In this study, a Cu(II) ions imprinted magnetic chitosan beads are prepared to use chitosan as functional monomer, Cu(II) ions as template, Fe₃O₄ as magnetic core and epichlorohydrin and glutaraldehyde as crosslinker, which can be used for removal Cu(II) ions from wastewater. The kinetic study shows that the adsorption process follows the pseudo-second-order kinetic equations. The adsorption isotherm study shows that the Langmuir isotherm equation best fits for the monolayer adsorption processes. The selective adsorption properties are performed in Cu(II)/Zn(II), Cu(II)/Ni(II), and Cu(II)/Co(II) binary systems. The results shows that the IIMCD has a high selectivity for Cu(II) ions in binary systems. The mechanism of IIMCD recognition Cu(II) ions is also discussed. The results show that the IIMCD adsorption Cu(II) ions is an enthalpy controlled process. The absolute value of ΔH (Cu(II)) and ΔS(Cu(II)) is greater than ΔH (Zn(II), Ni(II), Co(II)) and ΔS (Zn(II), Ni(II), Co(II)), respectively, this indicates that the Cu(II) ions have a good spatial matching with imprinted holes on IIMCD. The FTIR and XPS also demonstrates the strongly combination of function groups on imprinted holes in the suitable space position. Finally, the IIMCD can be regenerated and reused for 10 times without a significantly decreasing in adsorption capacity. This information can be used for further application in the selective removal of Cu(II) ions from industrial wastewater.     

Evaluation of sorption behavior of polymethylene-bis(2-hydroxybenzaldehyde) for Cu(II), Ni(II), Fe(III), Co(II) and Cd(II) ions

Poly[5,5??-methylene-bis(2-hydroxybenzaldehyde)1,2-phenylenediimine] resin was prepared and characterized by employing elemental, thermal analysis, FTIR, and UV?Cvisible spectroscopy. The metal uptake behavior of synthesized polymer towards Cu(II), Co(II), Ni(II), Fe(III) and Cd(II) ions was investigated and optimized with respect to pH, shaking speed, and equilibration time. The sorption data of all these metal ions followed Langmuir, Freundlich, and Dubinin?CRadushkevich isotherms. The Freundlich parameters were computed 1/n?=?0.31?±?0.02, 0.3091?±?0.02, 0.3201?±?0.05, 0.368?±?0.04, and 0.23?±?0.01, A?=?3.4?±?0.03, 4.31?±?0.02, 4.683?±?0.01, 5.43?±?0.03, and 2.8?±?0.05?mmol?g^?1 for Cu(II), Co(II), Ni(II), Fe(III), and Cd(II) ions, respectively. The variation of sorption with temperature gives thermodynamic quantity (??H) in the range of 36.72?C53.21?kJ/mol. Using kinetic equations (Morris?CWeber and Lagergren equations), values of intraparticle transport and the first-order rate constant was computed for all the five metals ions. The sorption procedure is utilized to preconcentrate these ions prior to their determination by atomic absorption spectrometer. It was found that the adsorption capacity values for metal-ion intake followed the following order: Cd(II)?>?Co(II)?>?Fe(III)?>?Ni(II)?>?Cu(II).     

Synthesis,characterization, and adsorption behavior of aminophosphinic grafted on poly(styrene‐Co‐divinylbenzene) for divalent metal ions in aqueous solutions

In the present work, two novel aminophosphinic acid ligands grafted on poly(styrene‐1%divinylbenzene) (St‐1%DVB) have been synthesized by reacting polymer precursors bearing primary amino groups with benzaldehyde (or propionaldehyde) and phenylphosphinic acid by the “one‐pot” Kabatachnik‐Fields reaction. The resins functionalized with aminophosphinic pendant groups were characterized by means of Fourier transform infrared spectroscopy (FTIR), thermal analysis, energy dispersive X‐ray microanalysis (EDX), and Scanning electron microscopy (SEM) imaging. Its adsorption capacity for divalent metal ions such as Cu(II) and Ni(II) were investigated. The adsorption procedure of Cu(II) and Ni(II) ions on polymer‐grafted aminophosphinic acid ligands was carried out by batch experiments. The result also shows that the adsorption process was best described by a pseudo‐second‐order kinetic equation and by the Langmuir adsorption isotherm. The best maximum adsorption capacity was obtained for resin with aminobenzylphosphinic acid groups [1.46 mg Cu(II)/g and 1.36 mg Ni(II)/g]. POLYM. ENG. SCI., 2013. © 2012 Society of Plastics Engineers     

Synthesis and characterization of poly(acrylaminophosphonic-carboxyl-hydrazide) chelating fibre

The poly(acrylaminophosphonic-carboxyl-hydrazide) chelating ion exchange fibre was prepared by the amination and phosphorization reaction of the hydrazine-modified polyacrylonitrile fibre. The structure of the chelating fibre and the same fibre saturated by Cu(II) and Ag(I) ions was investigated by IR spectrometer in detail. In addition, the crystalline and surface characteristics of the chelating fibre were determined by X-ray diffraction and SEM. The higher binding capacities of the fibrous sorbent for Cu(II), Pb(II), Zn(II), Co(II), Ni(II), Hg(II), Cd(II), Mn(II), Cr(III) and Ag(I) and the effect of pH value on adsorption of the chelating fibre for Cu(II) and Hg(II) ions were examined.     

Adsorption of Cr(III), Ni(II), Zn(II), Co(II) ions onto phenolated wood resin

In this study, phenolated wood resin was used an adsorbent for the removal of Cr(III), Ni(II), Zn(II), Co(II) ions by adsorption from aqueous solution. The adsorption of metal ions from solution was carried at different contact times, concentrations and pHs at room temperature (25°C). For individual metal ion, the amount of metal ions adsorbed per unit weight of phenolated wood resin at equilibrium time increased with increasing concentration and pH. Also, when the amounts of metal ions adsorbed are compared to each other, it was seen that this increase was order of Cr(III) > Ni(II) > Zn(II) > Co(II). This increase was order of Cr(III) > Ni(II) > Co(II) > Zn(II) for commercial phenol–formaldehyde resin. Kinetic studies showed that the adsorption process obeyed the intraparticle diffusion model. It was also determined that adsorption isotherm followed Langmuir and Freundlich models. Adsorption isotherm obtained for commercial phenol–formaldehyde resin was consistent with Freundlich model well. Adsorption capacities from Langmuir isotherm for commercial phenol–formaldehyde resin were higher than those of phenolated wood resin, in the case of individual metal ions. Original adsorption isotherm demonstrated the monolayer coverage of the surface of phenolated wood resin. Adsorption kinetic followed the intraparticle diffusion model. The positive values of ΔG° determined using the equilibrium constants showed that the adsorption was not of spontaneous nature. It was seen that values of distribution coefficient (K_D) decreasing with metal ion concentration in solution at equilibrium (C_e) indicated that the occupation of active surface sites of adsorbent increased with metal ions. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2838–2846, 2006     

聚丙烯酸/丙烯酰胺高吸水性树脂吸附性能

用反相悬浮聚合法合成了聚丙烯酸/丙烯酰胺高吸水性树脂(PAAAM),讨论了其吸附CuCl₂、NiCl₂、CoCl₂溶液中金属离子的性能,考察了溶液pH值和初始浓度对金属离子吸附的影响。结果表明,PAAAM在不同pH值及浓度区间,对金属离子的吸附能力有较大差异,可被用于Cu(II)、Ni(II)、Co(II)的分离。同时还探讨了PAAAM在混合金属离子溶液中的吸附性能及反复利用的可能性,发现在混合溶液中PAAAM表现出对Cu（II）有较好的选择性吸附能力;4次循环后对Cu(II)、Ni(II)、Co(II) 离子的吸附量为最大吸附量的80%以上,重复使用效果理想。     

Adsorption properties of poly(acrylaminophosphonic-carboxyl-hydrazide)type chelating fiber for heavy metal ions

In this article, the adsorption properties of poly(acrylaminophosphonic-carboxyl-hydrazide) chelating fibers for Cu(II), Cd(II), Co(II), Mn(II), Pb(II), Zn(II), Ni(II), and Cr(III) are investigated by a batch technique. Based on the research results of binding capacity, adsorption isotherm, effect of pH value on sorption, and adsorption kinetics experiments, it is shown that the poly(acrylaminophosphonic-carboxyl-hydrazide) chelating fibers have higher binding capacities and good adsorption kinetic properties for heavy metal ions. The sorption of the metal ions on the chelating fibers is strongly dependent on the equilibrium pH value of the solution. The adsorption isotherms of Cu(II) and Cd(II) on the chelating fiber exhibit a Langmuir-type equation. The adsorbed Cu(II), Cd(II), Zn(II), and Pb(II) could be eluted by diluted nitric acid. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 70: 7–14, 1998     

Investigation of Heavy Metal Ion Adsorption Characteristics of Poly(N,N Dimethylamino Ethylmethacrylate) Hydrogels

Abstract

In this study, Poly(N,N dimethyl‐amino ethylmethacrylate) (Poly(DMAEMA)) hydrogels with varying compositions were prepared in the form of rods by irradiating ternary mixtures of N,N‐dimethylamino ethylmethacrylate/ethyleneglycoldimethacrylate/water with gamma rays at ambient temperature. Swelling studies of poly (DMAEMA) hydrogels were performed at different pH values and maximum swelling values reached at pH 2. The adsorption characteristics of Pb(II), Cd(II), Ni(II), Zn(II), Cu(II), and Co(II) ions to poly(N,N dimethylamino ethylmethacrylate) hydrogels were investigated by a batch process. The order of affinity based on amount of metal ion uptake was found as follows: Cu(II)>Zn(II)?Co(II)>Pb(II) >> Ni(II)>Cd(II). In the adsorption studies of Cu(II), Zn(II), Co(II), Pb(II), Ni(II), and Cd(II) ions the Langmuir type adsorption isotherms were observed for all gel systems.     

Synthesis,characterization of poly(allylamine)chelates with Cu(II), Co(II) and Ni(II)

Summary The parent polymer, poly(allylamine) as ligand polymer was employed to synthesize polychelates of heavy metal ions. The functional poly(allylamine) and its Ni(II), Co(II) and Cu(II) metal chelates were characterized by elemental analysis, FT-IR spectroscopy, TGA, and SEM. For the polychelates magnetic and conductivimetry studies were also carried out.     

Preparation of a novel chelating resin bearing amidinothiourea moieties and its removal properties for Hg(II) ions in aqueous solution

A novel chelating resin bearing amidinothiourea (ADTU) moieties was prepared by chloroethyl crosslinked polystyrene (CMPS) with ADTU in the presence of a phase transfer catalyst. Fourier transform infrared spectra (FT-IR) and scanning electron microscopy (SEM) were used to characterized the resulting chelating resin. The saturated adsorption capacity of Hg(II) ions estimated from the Langmuir model was up to 1215 mg g^?1at 313 K. Furthermore, the resin was able to selectively separate Hg(II) from multicomponent solutions with Cd(II), Co(II), Cu(II), Zn(II), Mg(II) and Pb(II). The desorption process showed the mercury recovery reached to 99.2% under eluting condition of 1 M HCl + 8% thiourea.     

Synthesis,Characterization, and Applications of a New Chelating Resin Containing 4-2-(Thiazolylazo) Resorcinol (TAR)

A new phenol–formaldehyde based chelating resin containing 4-(2-thiazolylazo) resorcinol (TAR) functional groups has been synthesized and characterized by Fourier transform infrared spectroscopy and elemental analysis. Its adsorption behavior for Cu(II), Pb(II), Ni(II), Co(II), Cd(II), and Mn(II) has been investigated by batch and column experiments. The chelating resin is highly selective for Cu(II) in the pH range 2 ～ 3, whereas alkali metal and alkaline earth metal ions such as Na(I), Mg(II), and Ca(II) are not adsorbed even at pH 6. Quantitative recovery of most metal ions studied in this work except Co(II) is achieved by elution with 2M HNO₃ at a flow rate of 0.2 mL min^?1. A similar trend is observed for distribution coefficient values. The quantitative separations achieved on a mini-column of chelating resin include Cd(II) – Cu(II), Mn(II) – Pb(II), Co(II) – Cu(II), Mn(II) – Ni(II), and Mn(II) – Co(II) – Cu(II). The recovery of copper(II) is quantitative (98.0–99.0%) from test solutions (10–50 mg/L) by 1 mol/L HNO₃-0.01 mol/L EDTA. The chelating resin is stable in acidic solutions below 2.5 M HNO₃ or HCl as well as in alkaline solution below pH 11. The adsorption behavior of the resin towards Cu(II) was found to follow Langmuir isotherm and second order rate.     

Walnut shell supported nanoscale Fe0 for the removal of Cu(II) and Ni(II) ions from water

The walnut shell supported nanoscale zero‐valent iron (walnut‐nZVI) was prepared from sodium borohydride, iron(II) chloride tetrahydrate, and walnut shell by liquid phase chemical reduction and characterized by FTIR, TEM, and XRD. The composites were tested as adsorbent for the removal of Cu(II) or Ni(II) ions. The equilibrium data were analyzed by the Langmuir, Freundlich, Dubinin–Radushkevich, which revealed that Langmuir isotherm was more suitable for describing Cu(II) and Ni(II) ions adsorption than the other two isotherm models. The results indicated that the maximum adsorption capacity was higher than some other modified biomass waste adsorbents under the proposed conditions, were 458.7, 327.9 mg g^?1 for Cu(II) or Ni(II). The adsorption kinetics data indicated that the adsorption fitted well with the pseudo‐second‐order kinetic model. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43304.     

Synthesis and separation properties for Cu(II)‐Ni(II) of macroporous crosslinked polystyrene‐supported triethylenetetramine resin using Cu(II) as template

A new method for preparing a novel macroporous chelating resin that has good adsorption capability for Cu(II) and high selectivity for it with the coexistence of Ni(II) was introduced in this article. First, the aminated resin (PS‐TETA) was synthesized by the reaction of crosslinked macroporous chloromethylated polystyrene with triethylenetetramine. Subsequently, PS‐TETA was coordinated with Cu(II) and then PS‐TETA‐Cu was obtained. After the crosslinking reaction of PS‐TETA‐Cu with epoxy chloropropane, the adsorbed Cu(II) was removed by chlorhydric acid, and then the target resin‐Cu(II) template triethylenetetramine crosslinked polystyrene resin was obtained. The selectively sorption tests for Cu(II) showed that the sorption capacity was as high as 1.6 mmol/g and the selectivity coefficient α_{Cu(II)/Ni(II)} could reach to 9.06 with the coexistence of Ni(II). SEM and nitrogen adsorption at 77 K methods were used to characterize the porous structure of the resin. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 963–967, 2007     

Heavy metals adsorption on some iminodiacetate chelating resins as a function of the adsorption parameters

The adsorption properties of some novel chelating resins (CRs) bearing iminodiacetate groups for removal of heavy metal ions like: Cu(II), Co(II) and Ni(II) from aqueous solutions comparative with the commercial resin Amberlite IRC-748 have been studied in this work by a batch equilibrium technique. Quantitative analysis for adsorption was conducted using UV–vis spectroscopy to investigate the kinetics, adsorption isotherm and thermodynamics of the removal process considering equilibration time, pH, metal ion concentration and temperature as controlling parameters. The metal adsorption capacities, at pH 5, were in the order Cu(II) > Ni(II) > Co(II), for both the CR with 10 wt.% DVB (CR-10) and the commercial resin Amberlite IRC-748. The adsorption capacities on CR-10 were higher for Ni(II) and Co(II) ions, but lower for Cu(II) ions compared with Amberlite IRC-748. Both Freundlich and Langmuir isotherms well fitted on the adsorption results of Cu(II), Ni(II) and Co(II) ions on all iminodiacetate resins.     

PSSMA修饰磁性氧化石墨烯对Pb2+、Cu2+ 的吸附性能

以氧化石墨烯(GO)、FeCl_3·6H_2O及聚(4-苯乙烯磺酸-共聚-马来酸)钠盐(PSSMA)为主要原料,通过简便一步溶剂热法制备了阴离子聚电解质修饰磁性氧化石墨烯(MGO@PSSMA),并将其用于水溶液中重金属Pb~(2+)、Cu~(2+)的吸附去除。采用FTIR、SEM、TEM、VSM和DLS对制备的MGO@PSSMA进行了表征。考察了溶液pH、吸附时间、溶液初始质量浓度对Pb~(2+)、Cu~(2+)在MGO@PSSMA及未经PSSMA修饰磁性氧化石墨烯(MGO)上吸附的影响。探讨了吸附等温过程、吸附动力学及吸附作用机理。结果表明:MGO表面引入PSSMA可有效增加其对Pb~(2+)、Cu~(2+)的吸附量。在pH=5,溶液初始质量浓度为300 mg/L时,MGO@PSSMA对Pb~(2+)和Cu~(2+)的实际吸附量达141.1和104.8 mg/g。当溶液初始质量浓度为150 mg/L时,MGO@PSSMA对Pb~(2+)和Cu~(2+)的吸附平衡时间分别为2和1.5 min。MGO@PSSMA对Pb~(2+)、Cu~(2+)的吸附动力学及吸附等温数据分别符合准二级吸附动力学模型和Langmuir吸附等温模型。使用乙二胺四乙酸(EDTA)和HCl可实现MGO@PSSMA的有效再生;通过外加磁场作用可实现MGO@PSSMA的回收再利用。     

Adsorption of copper(II), cobalt(II), and iron(III) ions from aqueous solutions on poly(ethylene terephthalate) fibers

The adsorption behavior of poly(ethylene terephthalate) (PET) fibers towards copper(II), cobalt(II), and iron(III) ions in aqueous solutions was studied by a batch equilibriation technique. Influence of treatment time, temperature, pH of the solution, and metal ion concentration on the adsorption were investigated. Adsorption values for metal ion intake followed the following order: Co(II) > Cu(II) > Fe(III). One hour of adsorption time was found sufficient to reach adsorption equilibrium for all the ions. The rate of adsorption was found to decrease with the increase in the temperature. Langmuir adsorption isoterm curves were found to be significant for all the ions studied. The heat of adsorption values were calculated as −5, −2.8, and −3.6 kcal/mol for Cu(II), Co(II), and Fe(III) ions, respectively. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 68: 1935–1939, 1998     

Characterization of Ag(I), Co(II) and Cu(II) removal process from aqueous solutions using dolomite powder

Dolomite, a natural adsorbent, was used for removal of Ag(I), Cu(II) and Co(II) from aqueous solutions. Adsorption parameters including pH, temperature and contact time have been investigated to obtain adsorption mechanism. The results of experiments showed that adsorption of the metal ions increased by increasing pH values up to 5.5. The adsorption process was initially fast. Equilibrium isotherm data were analyzed using Langmuir, Freundlich and Dubinin-Radushkevich isotherm models. Maximum adsorption capacity of Ag(I), Cu(II) and Co(II) was 1.34, 1.63 and 2.84 mg/g at 20 oC, respectively. Kinetic models including Lagergren first-order and pseudo-second-order were used to test kinetic data. The results showed that pseudo-second-order has good agreement with experimental data. Thermodynamic parameters of the process were also investigated at different temperatures. The negative values of Gibbs free energy and enthalpy changes for Ag(I), Cu(II) and Co(II) indicated the spontaneous and exothermic nature of the adsorption process.     

Synthesis,characterization and application of a novel zinc(II) ion-imprinted polymer

In our study, a Zn(II) ion-imprinted polymer (ZnIP) and non-imprinted polymer (NIP) were synthesized via free-radical polymerization. 1-Vinylimidazole, ethylene glycol dimethacrylate, 2-hydroxyethylmethacrylate and 2,2′-azobisisobutyronitrile were used as functional, cross-linking monomers and free-radical initiator, respectively. The obtained polymer was characterized by various analytical methods (Fourier Transform Infrared Spectroscopy, Transmission Electron Microscopy, Wavelength Dispersive X-ray Fluorescence, UV VIS, thermal analysis). The sorption properties of ZnIP and NIP were evaluated after removal of Zn(II) ions from the polymer network. The optimum pH for adsorption was 7.0. The maximum adsorption capacity at the pH was 5.2 and 0.22 mg/g for ZnIP and NIP, respectively. To determine the selectivity, the polymer was equilibrated with the binary mixture of Zn(II) ions and the interfering ions [Cu(II), Ni(II) or Co(II)]. The relative selectivity of ZnIP was 22.57, 5.44 and 46.17 for Cu(II), Ni(II) and Co(II) ions, respectively. The proposed ZnIP sorbent was applied to determine the zinc ions in urine samples by Wavelength Dispersive X-ray Fluorescence.     

Synthesis and characterization of novel ion-exchange resin based on polyimide containing 8-hydroxyquinoline as a pendent groups

Novel ion-exchange resin (PBMDDMCMHQ polyimide) having 8-hydroxyuinoline as a pendent groups was prepared using phenylenebismaleimide-diamine polyimide (PBMDDM) and 5-chloromethyl-8-hydroxyquinoline hydrochloride (CMHQ). Phenylenebismaleimide-diamine polyimide (PBMDDM) was prepared by Michael addition reaction of 1,3-phenylenebismaleimide (PBM) and 4,4’-diaminodiphenyl methane (DDM). The resulting ion-exchange resin was characterized by spectral techniques. Polymeric metal chelates of ion-exchange resin were also prepared using transition metal ions Zn(II), Cu(II), Ni(II), Co(II) and Mn(II), and were duly characterized. Ion-exchange properties of ion-exchange resin (PBMDDMCMHQ) for Fe(III), Zn(II), Ni(II) and Cu(II) metal ions were also studied by batch-equilibration method. The produced ion-exchange resin (PBMDDMCMHQ) has thermal stability up to 220°C and can be used over a wide pH range. It has good metal up take capacity at varying pH range and can be recycled.