Low-frequency ultrasound treatment of chronic venous leg ulcers in an outpatient therapy

An in vitro dye leakage study was performed to compare the sealing ability of glass ionomer, composite resin and glass ionomer/resin cement when used as restorative materials for G.V. Black class V cavities. In this research, standard Class V cavities were prepared in sound premolar teeth extracted for orthodontic reasons. The cavities were randomly divided into 3 groups. After filling the cavities with glass ionomer cement, composite resin and light curing glass ionomer/resin cement, the specimens were immersed in silver nitrate solution. Marginal microleakage at the interface between the cavity wall and restoration was evaluated. The results were analyzed by using Kruskal-Wallis and Mann Whitney U tests. Result of this in vitro study indicate that composite resin and glass ionomer/resin cement provide a better seal than glass ionomer cement.     

Polymerisation shrinkage around composite resin restorations--an in vitro study

The aim of this study was to determine the degree of penetration of a fluorescent adhesive at the margins of 3 brands of posterior composite resin restorative materials. Seventy-eight extracted human premolar teeth were used. Class II cavities were prepared on both approximal surfaces of each tooth in such a manner that the gingival wall was situated apical to the amelo-cemental junction. The enamel of the cavity walls was bevelled, etched and treated with the enamel bonding agent recommended by the manufacturer. The 3 brands of composite resin used were: Fulfil, Estilux Posterior and P 50. The teeth were divided at random into 3 groups of 26 premolars each. The mesial and distal cavities of each tooth in the group were filled with the same brand. The resin was inserted in two increments in both the mesial and distal cavities and polymerised. The margins of one restoration in each tooth was coated with fluorescent adhesive and cured. All the restored teeth were embedded in clear epoxy resin and then sectioned. The mounted sections were examined at 100X magnification with fluorescent light. The polymerisation contraction gap at different areas of the tooth/restoration interface and the degree of penetration of the fluorescent adhesive into the gap was determined. The fluorescent adhesive penetrated the contraction gaps in all 3 posterior restorative materials to varying degrees. The defects observed were similar in all 3 brands and the differences in degree of penetration were not statistically significant (p > 0.05).     

An in-vitro investigation of microleakage and gap size of glass ionomer/composite resin "sandwich" restorations in primary teeth

Eighty extracted primary molars were divided into four groups of twenty teeth. Class II cavities were prepared in all teeth with equal numbers of proximal boxes having cavosurface margins either in enamel, or dentin/cementum. Each group was allocated to an open or closed sandwich technique using glass ionomer as a lining. Following the placement of the composite resin restorations, the gap size measured at the proximal box was greatest for the closed sandwich group with the cavosurface margin on enamel (0.203 microns) or dentin/cementum (0.174 microns). Microleakage scores were measured at the proximal box and were greatest for the closed sandwich group with the cavosurface margin on dentin/cementum. The best result was obtained for the open sandwich group with the cavosurface margin on enamel.     

Nature of geometric (Berry) potentials

Previous studies have found that the fluoride concentration of plaque growing on or adjacent to glass ionomer cement (GIC) is increased and the proportion of mutans streptococci in plaque is reduced. So far, there are only a few studies of the long-term effect of glass ionomer fillings on plaque in vivo. The aim of this study was to determine whether old GIC fillings have effects on plaque fluoride and microflora and whether this effect can be increased by topical application of fluoride on GIC fillings in vivo. The participants were 27 adults with at least 3 GIC fillings about 3 years old. Plaque was collected from sites adjacent to the GIC fillings and from the contralateral teeth, after which a 1.2% fluoride gel was applied to all teeth. Three days later, plaque was collected from the same sites as before. Stimulated saliva was also collected at both appointments. The results show that none of the patients had elevated levels of fluoride in their saliva either before or 3 days after the fluoride treatment. The fluoride concentration was 0.51 microgram/mg protein in plaque on GICs and 0.35 microgram/mg protein in plaque on contralateral teeth (p = 0.028). After the fluoride treatment, the respective fluoride concentrations were 0.59 microgram/mg and 0.75 microgram/mg (p = 0.849). No significant differences in the proportion of mutans streptococci and lactobacilli in plaque from GIC and contralateral teeth were found. The results suggest that the fluoride concentration of plaque growing on old GIC fillings is slightly increased. In this study, however, this had no significant effect on the cariogenic microflora.(ABSTRACT TRUNCATED AT 250 WORDS)     

In vitro evaluation of marginal and internal adaptation of class II resin composite restorations after thermal and occlusal stressing

The aim of this in vitro trial was to evaluate the external and internal adaptation of class II composite restorations to tooth structure by means of replica scanning electron microscope (SEM) observation. Standard MOD preparations were cut in human extracted teeth with margins located above and below the cementoenamel junction. Cavities were restored with either a direct multilayered technique, inlays (using conventional or dual DBA application) or prepolymerized composite inserts, using similar restorative material (Syntac, Variolink and Tetric). Evaluations were performed after mechanical and thermocycling. For the marginal adaptation in enamel, the bevelled margins of the direct group resulted in higher percentages of "continuity" (92.5% mesially and 94.6% distally), while the "marginal tooth fracture" was the most commonly found defect in groups with a butt preparation (up to 29.4%, with inserts). For the marginal adaptation in dentin, "continuity" percentages varied from 59% (inlay) to 87.9% (insert). As regards the internal adaptation, results for the whole dentin interface varied from 43.1% (inlay) to 63.9% (inlay with dual bonding) of "continuity". No regional difference in internal adaptation was found between the different preparation areas, except between gingival dentin and gingival enamel (44.9% vs. 80.7% of continuity, all group pooled data). Debonding occurred only at the dentin-restoration interface and consistently took place at the top of the hybrid layer. In the present experimental conditions, the inlay or insert techniques, which make use of the Dual bonding concept, proved to have the best potential to maintain the integrity of dentin-restoration interface.     

Histological changes induced by CO2 laser microprobe specially designed for root canal sterilization: in vivo study

Sixty-six class-II CAD/CAM-manufactured ceramic inlays (Cerec) were placed in 27 patients. Each patient received at least one inlay luted with a dual-cured resin composite and one inlay luted with a chemically cured resin composite. The inlays were examined 5 years after luting using the California Dental Association (CDA) criteria. Eighty-nine percent of the 66 inlays were rated 'satisfactory'. During the follow-up period replacement was required for 3 inlays because of inlay fractures (4.5%) and 1 inlay because of fracture of the tooth substance (1.5%). All those inlays were luted with the dual-cured resin composite luting agent. Of the remaining 62 inlays the CDA rating 'excellent' was given to 84% for color, 97% for surface, and 81% for anatomic form. 'Excellent' margin integrity was seen in 52% of the dual-cured resin composite luted inlays and in 61% of the chemically cured resin composite luted inlays. No statistically significant (P> 0.05) difference was observed between the two luting agents.     

A procedure for preparing undecalcified and unembedded bone sections for light microscopy

Recently, new restoratives, such as resin-modified glass ionomer cements (RMGIC) and polyacid-modified resin composites (PMC) were introduced for class III and class V cavities. Both materials use simplified cavity conditioning methods. The well-established treatment of enamel with phosphoric acid has been replaced with treatment using weaker acids. The purpose of this study was to investigate in vivo the quality and durability of the marginal bond to enamel of these restorative system and compare it with a resin composite restorative, Seventeen patients received class III restorations of each of the three restoratives. At baseline and after 1 year replica impressions were made for investigation of the vestibular margins with the scanning electron microscope. Semi-quantitative analysis of the enamel-restorative interfaces was performed at x200 and x1000 magnifications. The three restorative systems showed good marginal adaptation and high percentages of the length of the margins investigated at baseline were gap-free (82%-92%). The resin composite showed significantly better adaptation than the other materials. The marginal quality decreased significantly after 1 year for the resin composite and the polyacid-modified resin composite. The RMGIC showed improved sealing after 1 year in vivo, probably due to continuing water uptake. The percentages of gap-free margins of the total marginal length observed at 1 year were 73%, 90%, and 84%, respectively, for the PMC, the RMGIC and the resin composite. The difference between the PMC and the RMGIC was significant. In conclusion, a good marginal quality was seen for all three restorative systems in class III cavities after a period of 1 year.     

Marginal adaptation of resin-bonded light-cured glass ionomers in dentin cavities

PURPOSE: To investigate the marginal adaptation of resin-modified glass ionomer cements in dentin cavities placed with or without additional application of resin bonding systems. MATERIALS AND METHODS: Three resin-modified materials (Fuji II LC, Photac-Fil, Vitremer), one compomer (Dyract) and as reference an adhesively bonded resin composite system (Gluma CPS-Pekafill) were used. Flat peripheral dentin surfaces on human molar teeth were produced by wet grinding on SiC paper. Cylindrical cavities, 3.5 mm wide, were prepared in these dentin areas and restored with the individual materials. Sixty cavities were pretreated and restored as requested by the respective manufacturers. Following water storage of the specimens for 15 minutes or 24 hours, excess was gently removed by wet grinding for microscopic inspection of the marginal area. Additionally, in 30 cavities an experimental one-component adhesive resin system, a proprietary dimethacrylate and HEMA mixture dissolved in acetone, was combined with each of the restoratives for evaluation after 15-minutes water storage. Finally, in six cavities each, Dyract was combined with Prime and Bond 2.0, and Vitremer with Scotchbond Multi-Purpose Plus for assessment after 15 minutes. Maximum marginal gap widths (MGW) were measured. One-way ANOVA by ranks (Kruskal-Wallis-Test) followed by Wilcoxon's Two-Sample test were used to study the statistical difference of MGW among the treatment groups at a rejection level P = 0.05. RESULTS: Neither the conventionally placed material systems nor the restorations in combination with adhesives showed consistently gap-free margins after 15-minute water storage. After 24-hour storage with Vitremer 4 of the 6 restorations were gap-free, whereas with all other materials only perfect margins were registered. There was, however, no significant difference between the groups. Application of the experimental and/or the specific resin bonding agents had no effect on early MGW except for the Photac-Fil group, which was significantly reduced.     

Interstitial pneumonitis detected by bronchoalveolar lavage and transbronchial lung biopsy in adult-onset Still''s disease]

The pattern of water uptake into a polyacid-modified composite resin (compomer), Dyract (D), was assessed using gravimetric analysis and tritiated water absorption. The results were compared with a resin composite, Herculite (H), a resin-modified glass-ionomer, Fuji II LC (FL), and a conventional glass-ionomer, Fuji II (F). Samples were stored in tritiated water for periods varying between 6 h and 6 months. The resulting change in gravimetric weight and dimensions was recorded. The tritiated water content was then assessed using liquid scintillation counting and this was compared to the gravimetric changes. The inherent water content of each material was also established. D and H showed a slow steady net uptake to 3% and 1.3% weight by volume (WV) respectively at 6 months. FL showed a rapid uptake reaching 8.9% WV at 7 days and 9.3% WV at 6 months. F showed a steady, less dramatic water uptake reaching 5.3% WV by 6 months. For the glass-ionomer materials, values for gravimetric water uptake and tritium release differed due to the ongoing acid base reaction and an increase in firmly bound water. This phenomenon was noted in D suggesting evidence of a similar reaction in this material.     

Microleakage of new dentin bonding systems using human and bovine teeth

The objective of this study was twofold: to evaluate the microleakage behavior of three dentin bonding systems and to determine if bovine teeth are comparable substrates to human teeth when studying the microleakage of various materials. The materials evaluated were Scotchbond Multi-Purpose Adhesive, Prisma Universal Bond 3, and All-Bond 2. All three bonding systems were used in combination with Prisma APH hybrid composite for comparison of microleakage behavior. Sixty class 5 preparations were cut at the cementoenamel junction for groups containing 30 human and 30 bovine teeth. A 1 mm 45 degree bevel was placed at the enamel margin. Teeth were grouped according to the dentin bonding system used and then restored according to the manufacturer's directions. After restoration, the teeth from each group were stored in distilled water at 37 degrees C for 3 days. The teeth were then thermocycled between 4 degrees C and 58 degrees C for 100 cycles and returned to distilled water at 37 degrees C for an additional 4 days. The teeth were then sealed with nail polish up to 1 mm from the margins of the restoration and placed in 45Ca isotope for 2 hours. The teeth were then sectioned and placed on x-ray film to produce autoradiographs. Microleakage was evaluated for the enamel and dentin margins separately using the following scale: 0 = no leakage, 1 = penetration of isotope to less than 1/2 the distance to the axial wall, 2 = penetration of isotope greater than 1/2 of the distance to the axial wall but short of the axial wall, and 3 = penetration of isotope to the axial wall or beyond. The materials were compared to each other using the Mann-Whitney U and Kruskal-Wallis tests. The gingival margins were compared to the incisal margins for all materials. No statistically significant differences in microleakage were revealed between the incisal and gingival location for human substrates, but there was statistically significant greater gingival microleakage for bovine substrates. All-Bond 2 leaked significantly more than Scotchbond Multi-Purpose for human substrates at the incisal margin. All-Bond 2 had significantly more microleakage than Prisma Universal Bond 3 at both dentin and enamel margins for the bovine substrate. There were no statistically significant differences in microleakage among the bonding systems for the human substrate. No statistically significant differences between the microleakage behavior of human and bovine substrates were found. These results support the use of bovine teeth for in vitro microleakage studies.     

The rate of OH- ion release from lining materials containing calcium hydroxide

Four light-cured calcium hydroxide and three chemically cured resin-based lining materials were compared for hydoxil ion (OH-) release. Results indicated that the chemically cured calcium hydroxide cements were capable of OH- release for a longer period than the light-cured resin bases. Alkaliner (a chemically cured liner) produced and maintained the highest alkaline environment in the long-term, whereas calcium fluoride liner and Basic-L (both resin-based) showed the lowest values of OH- ion release.     

Fluoride release from tooth-colored restorative materials: a 12-month report

BACKGROUND: This study measured the amount of fluoride released from three light-activated glass polyalkenoate (ionomer) cements, a conventional glass polyalkenoate, a compomer and a fluoridated composite over a period of 12 months. METHODS: Five discs (7 x 2 mm) of each material were sequentially immersed in 4 mL portions of deionized water at 37 degrees C and before each measurement, the test specimen was rinsed with 1 mL of deionised water. An Orion Model 901 microprocessor digital Ionalyzer was used for the measurements and the data obtained were converted into microgram/cm2. The amount of fluoride released was measured 86 times during the 12-month test period. RESULTS: It was found that the pattern of fluoride release from the light-activated glass polyalkenoates was similar to that of the conventional glass polyalkenoate. The light-activated glass polyalkenoates, however, released significantly more fluoride than the conventional material. The composite and the compomer released significantly less fluoride than any glass polyalkenoate tested and the difference between the composite and the compomer was not significant. CONCLUSION: It was concluded that the light-activated glass polyalkenoates tested released more fluoride than a conventional glass polyalkenoate, a compomer or a composite, and that with regard to fluoride release the compomer behaved more or less like the composite.     

Participation of African Americans in clinical research

Low apical leakage along root fillings following an application of calcium hydroxide was reported in a few methylene blue dye penetration studies. It has been found recently that methylene blue is decolored by calcium hydroxide, indicating that the short penetration of methylene blue may not be due to a tight seal only. Of the 80 roots of human maxillary central incisors used in this study, 40 roots (group 1) received calcium hydroxide root canal dressing whereas another 40 roots (group 2) did not. All the roots were then obturated with gutta-percha and Tubli-Seal sealer. Leakage along 20 filled roots in each group was measured using a modified fluid transport model at 48 h, 2, 4, 8 and 16 weeks after obturation; whereas leakage of another 20 filled roots in each group was measured using dye penetration with 1% methylene blue. Using the fluid transport model, no significant difference was found between the two groups at any time interval (P = 0.4847, 0.3875, 0.9490, 0.4786, 0.9148 respectively after 48 h, 2, 4, 8 and 16 weeks); using the methylene blue penetration method, leakage in group 1 (with root canal dressing) was significantly less than that in group 2 (without root canal dressing) (P = 0.0374). The contradiction in results from the different models indicated that problems existed with the models.     

Amalgam alternatives--micro-leakage evaluation of clinical procedures. Part I: direct composite/composite inlay/ceramic inlay

This study investigated the degree of dye penetration with three different types of tooth-coloured restorations. Twenty-four intact extracted molars were collected. The teeth were immediately stored in water at room temperature. Class II cavity preparations were prepared and restored with three different types of tooth-coloured restorations: A, composite resin in the incremental technique; B, composite inlay technique; and C, ceramic inlay. Specimens were subjected to 700 cycles of thermal stress. They were than immersed in 2% basic fuchsin dye. The teeth were sectioned in three planes before being ranked as to the amount of dye penetration. The highest score obtained on three plano-parallel sections was adopted as the representative value. The three groups were compared using the Kruskal Wallis non-parametric test. Dye penetration was significantly lower at the enamel margins when using the composite inlay system and the incremental technique compared to the ceramic inlay technique. The restorations placed using the composite inlay technique showed less dye penetration than the incremental technique at the dentine margins (P < 0.017).     

Scanning electron microscopic evaluation of two compaction techniques using a composite resin as a root canal filling material

The canals of 20 human dental roots were instrumented using a a step- back technique. The smear layer was removed, and the canals were obturated with composite resin. Two different techniques of compaction were used: either vertical or lateral motions were used to condense composite resin inside the root canal that was then photopolymerized layer by layer using the argon laser (488 nm). The beam was delivered into the root canal by means of an optical fiber 320 micrometers in diameter. Longitudinal and cross-sections of the samples and resin replicas of the root canals were examined using a light and scanning electron microscope. Scanning electron microscopic examination revealed that laterally compacted resin fillings showed fewer voids than those obtained by vertical compaction. In both experimental groups, adhesion of the resin to the dentin walls, pulled-out resin tags, microfailure, and resin fracture, leaving a layer of resin associated with the wall surface were observed.     

Strength of secondary-cured resin composite inlay repairs

A study was designed to simulate the repair of an indirect resin composite restoration with conventionally cured resin composite. Two-part specimens were prepared to test the diametral tensile strength of the repair interface between the base material of an indirectly cured resin composite (Herculite XRV) and repairs carried out with three directly cured materials (Herculite XRV, TPH, and Charisma). The repairs were carried out with and without use of the bonding resin for the repair material. The diametral tensile strengths of all repaired specimens were significantly less than those of bulk unrepaired specimens. There were no significant differences between the diametral tensile strengths of repaired blocks when the repair materials were used without bonding resin. The use of an intermediate layer of bonding resin significantly increased the bond strengths obtained when Herculite XRV and TPH were used for repair. There was no significant difference between the strength values of Herculite XRV and TPH, but Charisma exhibited the lowest strengths of repaired specimens.     

Resin-modified glass ionomers for luting posterior ceramic restorations

OBJECTIVES: Until recently, esthetic inlay restorations in posterior teeth have been limited to cavities surrounded by enamel. Dentin adhesive systems in combination with luting composites and light-cured resin-modified glass ionomer cements offer a possibility for bonding ceramic inlays to cavities when the cervical margin is in dentin. This study was designed to compare in vitro marginal integrity of ceramic inlays bonded to dentin to restorations placed in cavities with margins located entirely in the enamel. METHODS: In the present in vitro study, the sealing abilities of a dentin bonding agent/luting composite combination (Syntac/Dual Cement, Vivadent) and resin-modified glass ionomers (Photac Fil, Photac Bond, ESPE; Dyract, De Trey Dentsply; Fuji II LC, GC Dental Industrial Corp.; and Vitremer, 3M Dental Products) used as luting agents in cavities extending beyond the cemento-enamel junction, were compared to the sealing abilities of a conventional luting composite (Vita Cerec Duo Cement, Vita) in cavities within sound enamel. SEM analysis and dye penetration were performed to evaluate marginal integrity at the cervical cavity margins. RESULTS: The dentin bonding agent/luting composite combination (Syntac/Dual Cement) rendered a marginal seal within the dentin similar to the quality obtained with the conventional luting procedures within sound enamel. When three out of the five resin-modified glass ionomers were used as luting agents (Dyract, Fuji II LC and Vitremer), the results were comparable to those reported for the dentin bonding agents and the conventional method. SIGNIFICANCE: Light-cured resin-modified glass ionomer cements may be considered as an alternative to dentin bonding agents when the cavity margins of ceramic inlay restorations are within the dentin. However, further studies, e.g., wear resistance, must be performed.     

Marginal adaptation of resin in relation to application technique and use of a dental adhesive system

Class V abrasion, erosion and caries lesions restored with composite resin seem to be more susceptible to microleakage, because the gingival margin is usually placed in cementum and/or dentine. The purpose of this study was to evaluate the microleakage, in vitro, of a dentinal bonding system using a technique of restoration with a positive and a negative control. This study was accomplished using extracted human teeth and dye penetration technique. The teeth were examined for microleakage after one month. It was concluded that in the gingival wall of the cavity microleakage was significantly reduced when the dentinal bonding agent and composite resin was placed and polymerized incrementally from enamel, to cementum.     

The influence of the depth of substrate dentin surface and thickness of the current restorative samples on bond strength

The effect of sample thickness and dentin depth on bond strength of composite, compomer and resin modified glass ionomer have been investigated. The occlusal surfaces of 84 non carious human third molars were used for bonding. 4 subgroups were tested, superficial dentin with sample thickness 1 and 2 mm and deep dentin with sample thickness 1 and 2 mm respectively SBMP + /Z 100 composite showed 26 +/- 3.2, 22.3 +/- 4.5, 17 +/- 3.2 and 21.8 +/- 4.2 MPa shear bond strength to S. dentin 1 mm, deep dentin 1 and 2 mm and S. dentin 2 mm respectively. Compoglass reported 10.4 +/- 1.57, 9.1 +/- 2.3, 5.0 +/- 0.6 and 9.24 +/- 3.1 MPa while, Vitremer achieved 4.7 +/- 0.49, 3.2 +/- 0.39, 3.0 +/- 0.81 and 3.2 +/- 0.53 MPa. It is concluded that the highest bond strength can be achieved to superficial dentin in thickness or increments not more than 1 mm. And that both dentin depth and sample thickness might influence the quality of the bond to dentin with an effect that varies from one material to another depending upon the mechanism of bond of each material and its chemical composition.